
Data Sheet
Programmable controller, 6 relays
Type MCX06C
Electronic controller suitable for all HVAC/R software application needs.
MCX06C is an electronic controller that holds all
the typical functionalities of MCX controllers in
the 32 x 74 mm standard size:
• programmability
• connection to the CANbus local network
• Modbus RS485 serial interface
Features:
• 4 analog and 6 digital inputs
• 2 analog and 6 digital outputs
• Insulated power supply 20 / 60 V DC - 24 V AC
• Easy upload of application software through
CANbus connection for programming key
• Remote access to data through CANbus
connection for additional display (LCD
available) and keyboard
• RTC clock for managing weekly time
programs and data logging information
• Modbus RS485 serial interface
• Display LED with 2 groups of digits for
showing the desired information in one
screen
• Dimensions 33 x 75 mm
• Panel mounting
AI183786420797en-000601

Built-in display (optional)
Dimensions
(1 DIN module = 17,5
mm)
Programmable controller, 6 relays, type MCX06C
Portfolio overview
Table 1: Portfolio overview
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 2

20 / 60 V DC and 24 V AC ± 15% 50/60 Hz SELV
Maximum power consumption: 6 W, 9 VA
Insulation between power supply and the extra-low voltage: functional
Self extinguishing V0 according to IEC 60695-11-10 and glowing / hot wire test at 960 °C according to IEC 60695-2-12
125 °C according to IEC 60730-1
Leakage current: ≥ 250 V according to IEC 60112
CE: -20T60 / UL: 0T55, 90% RH non-condensing
-30T80, 90% RH non-condensing
In Class I and / or II appliances
IP64 ~ NEMA3R only on the front cover
Period of electric stress across insulating parts
Long
Resistance to heat and re
Immunity against voltage surges
Software class and structure
AI1, AI2
Analog inputs selectable via software between:
• NTC temperature probes, default: 10 kΩ at 25 °C
• Pressure transducers with 0/5 V output
• 0/5V type: impedance is 18 kΩ
AI3, AI4
Universal analog inputs selectable via software between:
• ON/OFF (current: 20 mA)
• 0 / 1 V, 0 / 5 V, 0 / 10 V
• 0 / 20 mA, 4 / 20 mA
• NTC (10 kΩ at 25 °C)
• Pt1000
12 V+ power supply 12 V DC, 50 mA max for 4 / 20 mA transmitter (total on all outputs)
5 V+ power supply 5 V DC, 80 mA max for 0 / 5 V transmitter (total on all outputs)
0/5V type: impedance is 18 kΩ
0/10V type: impedance is 2 kΩ
DI1, DI2, DI3, DI4, DI5, DI6
Current consumption: 5 mA
AO1
Analog output selectable via software between:
• pulsing output, synchronous with the line, at modulation of impulse position (PPM) or modulation of impulse width (PWM):
◦ open circuit voltage: 6.8 V
◦ minimum load: 1 kΩ
• pulsing output, at modulation of impulse width (PWM) with range 100 – 500 Hz:
◦
open circuit voltage: 6.8 V
◦ minimum load: 1 kΩ
• 0 / 10 V DC non optoinsulated output, referred to the ground
◦ minimum load 1 kΩ (10 mA)
AO2
Analog output selectable via software between:
• pulsing output, synchronous with the line, at modulation of impulse position (PPM) or modulation of impulse width (PWM):
◦ open circuit voltage: 6.8 V
◦ minimum load 1 kΩ (10 mA)
• pulsing output, at modulation of impulse width (PWM) with range 100 – 500 Hz:
◦
open circuit voltage: 6.8 V
◦ minimum load 1 kΩ (10 mA)
Programmable controller, 6 relays, type MCX06C
Product specication
General features
Table 2: General features
Input/Output
Table 3: Analog inputs
Table 4: Digital inputs
Table 5: Analog outputs
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 3

Relay6Insulation between relays: functional (common lines internally connected)
Insulation between relays and the extra-low voltage parts: reinforced
Total current load limit: 6 A
C1-NO1, C2-NO2, C3-NO3, C4-NO4, C5-NO5, C6-NO6
Normally open contact relays
Characteristics of each relay:
• 4 A 30 V DC / 250 V AC for resistive load - 100.000 cycles
•
0.7 A 250 V AC for inductive load - 100.000 cycles with cos(phi) = 0.5
• UL: 240 V AC - 1 A resistive - 1.0 FLA - 6.0 LRA - 96 V A pilot duty 30.000 cycles
TTL Serial Comm.
(if expected)
24 V AC
*
**
RS485 (Modbus)
(if expected)
Analog
output
UNIVERSAL
L N
POWER SUPPLY
DIGITAL OUTPUT
CAN485
CAN
NTC
Pt1000
ON/OFF
0/1 V
0/5 V
0/10 V
0/20 mA
4/20 mA
NTC
Pt1000
ON/OFF
0/1 V
0/5 V
0/10 V
0/20 mA
4/20 mA
UNIVERSAL
R1 20
CANH
CANL
CANH
CANL
ID
RX/D-
DIR
TX/D+
VCC
N0 1
N0 2
N0 3
N0 4
N0 5
N0 6
C 1
C 2
C 3
C 4
C 5
C 6
DI 3
DI 5
DI 1
DI 4
DI 6
DI 2
AI 4
AI 2
12V+
DI 6
DI 4
DI 2
A0 2
L 1
N 1
COM
COM
INPUT/OUTPUT
COM
COM
AI 3
AI 1
5V+
DI 5
DI 3
DI 1
A0 1
speed
regulator
CANbus
local network
L
N
L
N
to the AI
(80 mA max)
NTC
0/5 V
NTC
0/5 V
to the AI
(50 mA max)
0/10 V
PWM
PPM
PWM
PPM
5 A
5 A
5 A
5 A
5 A
5 A
Power
supply
board
CAN
GND
CAN
GND
MCX06C
Danfoss
80G8033
Programmable controller, 6 relays, type MCX06C
Table 6: Digital outputs
Connection diagram
Figure 1: Connection diagram
NOTE:
* Connection has to be made on the rst and last local network units, make the connection as close as possible to
the connector.
** C1, C2, C3, C4, C5, C6 internally connected between themselves.
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 4

Input and output connector
18 way Molex Microt type (43025-1800) crimping contact
type
• Molex: (43030-0001) section cable AWG20-24 (0.52 – 0.20 mm²)
• Molex: (43030-0004) section cable AWG26-30 (0.13 – 0.05 mm²)
• Instrument for the Molex crim code 69008-0982 (20-24 AWG)
• Instrument for the Molex crimp code 69008-0983 (26-30 AWG)
4 way Molex Wire-to-board type (87369-0400) crimping contact type
• Molex: (50212-8000) section cable AWG24-30 (0.20 – 0.05 mm²)
• Instrument for the Molex crimp code 63811-1200
8 way Molex Wire-to-board type (87369-0800) crimping contact type
• Molex: (50212-8000) section cable AWG24-30 (0.20 – 0.05 mm²)
• Instrument for the Molex crimp code 63811-1200
2 way Molex KK type (09-50-8021) crimping contact type
• Molex: (08-50-0105) section cable AWG18-24 (0.82 – 0.20 mm²)
• Molex: (08-50-0107) section cable AWG22-26 (0.32 – 0.13 mm²)
• Instrument for the Molex crimp code 69008-0953
Digital output 1-6 connector
12 way Molex Minit Jr. type (39-01-2125) crimping contact
type
• Molex: (39-00-0077) section cable AWG16 (1.30 mm²)
• Molex: (39-00-0038) section cable AWG18-24 (0.82 – 0.20 mm²)
• Molex: (39-00-0046) section cable AWG22-28 (0.32 – 0.08 mm²)
• Instrument for the Molex crimp code 69008-0724
Meaning of the icons and digits
Settled by the application software
Set by the application software
Programmable controller, 6 relays, type MCX06C
Connection
Table 7: Connection
Dimensions
Figure 2: Dimensions
User interface
Figure 3: Display
Table 8: User interface
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 5

MCX06C, 24 V, LED, RS485, RTC, S
MCX06C, 24 V, LED, RS485, RTC, I (36 pieces)
ACCCNX, Wired Connectors Kit for MCX06C, 1 m Cable
ACCCNX, Wired Connectors Kit for MCX06C, 2 m Cable
EU Declaration of conformity
EMC directive 2014/30/EU:
EN61000-6-3: 2007 +A1:2011
EN61000-6-2: 2005
LVD directive 2014/35/EU:
EN60730-1: 2011
EN60730-2-9: 2010
RoHS directive 2011/65/EU and 2015/863/EU:
EN 50581: 2012
Electrical - Safety
Certicate
Programmable controller, 6 relays, type MCX06C
Ordering
Product part numbers
Table 9: Product part numbers
NOTE:
Single pack codes (S) don’t include standard kit connectors, industrial pack codes (I) don’t include standard kit
connectors.
Accessories part number
Table 10: Accessories part number
Certicates, declarations, and approvals
The list contains all certicates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.
Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.
Table 11: Certicates, declarations, and approvals
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 6

Online support
Danfoss oers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.
The Danfoss Product Store
The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certications, accessories,
and more.
Start browsing at store.danfoss.com.
Find technical documentation
Find the technical documentation you need to get your project up and running. Get direct access to
our ocial collection of data sheets, certicates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.
Start searching now at www.danfoss.com/en/service-and-support/documentation.
Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.
Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.
Get local information and support
Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.
Find your local Danfoss website here: www.danfoss.com/en/choose-region.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alterations can be made without subsequential
changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
© Danfoss | Climate Solutions | 2021.03 AI183786420797en-000601 | 7