Danfoss MCM 103, FC 280 Installation guide
Installation Instructions
VLT® Memory Module MCM 103
VLT® Midi Drive FC 280
The instructions provide information about installing the VLT
Memory Module MCM 103 in VLT® Midi Drive FC 280.
®
The VLT
frequency converters. The module acts as a combination of
both memory module and activation module.
A memory module stores rmware and parameter settings of a
frequency converter. If a frequency converter malfunctions, the
rmware and parameter settings on this frequency converter
can be copied to new frequency converters of the same power
size. Copying the settings saves the time for setting up new
frequency converters for the same applications.
As an activation module, the VLT
can enable locked features in the FC 280 frequency converter
rmware.
module are encoded les that are protected from direct
viewing.
To view
memory module, a memory module programmer is required. It
is not included in this package and must be ordered
separately (ordering number: 134B0792).
Memory Module MCM 103 is an option for FC 280
®
Memory Module MCM 103
The data and parameter settings on a memory
in a memory module, or transfer
les
les
to a
®
The memory module can be inserted and removed during
operation of the frequency converter, but it is only active after
a power cycle.
The personnel mounting or dismounting the memory module
must be familiar with the safety instructions and measures
®
described in the VLT
Midi Drive FC 280 Operating Guide.
Items Supplied
Description Ordering number
®
Memory Module MCM 103
VLT
Tab le 1 . 1 O r deri n g Nu mbers
132B0466
Installation
1. Remove the plastic front cover of the frequency
converter with a screwdriver.
1 Memory module
2 Status indicator light
3 Socket for memory module
4 Memory module programmer
5 USB Type-B receptacle
Illustration 1.1 Memory Module and Memory Module Programmer
Danfoss A/S © 09/2017 All rights reserved. MI07N102
Illustration 1.2 Removing the Front Cover of the Frequency
Converter
Installation Instructions
VLT® Memory Module MCM 103
VLT® Midi Drive FC 280
2. Open the lid of the memory module container.
Illustration 1.3 Lid Opened
4. Close the lid of the memory module container.
Illustration 1.5 Lid Closed
5. Mount the plastic front cover of the frequency
converter.
3. Plug the memory module in the frequency converter.
Illustration 1.4 Plugging the Memory Module in the Frequency
Converter
Illustration 1.6 Mounting the Front Cover of the Frequency
Converter
6. When the frequency converter powers up, the data
on the frequency converter is stored into the
memory module.
2
Danfoss A/S © 09/2017 All rights reserved. MI07N102
Loading...