Danby SRVWC050L User Manual

UNDER COUNTER

WINE CELLAR

INTÉGRATION SOUS LE COMPTOIR

CAVE À VIN

USE & CARE GUIDE

GUIDE D’UTILISATION ET D’ENTRETIEN

2017.08.10

DUAL ZONE WINE CELLAR

Detailed View

1 Consumer Support 1-844-455-6097

Table of Contents

Welcome
Important Safety Instructions

Safety Requirements

Grounding Instructions

Installation Guide
Unboxing

Installation Requirements
Anti-Tip Bracket
Leveling Instructions

Initial Set Up
Features

Temperature Display
Door Ajar Alarm
Interface Lock
Sabbath Mode

User Interface Guide
Menu - Primary

Menu - Secondary
Temperature Bezel
Lighting
Power
Varietals

3
4

4
4

5
5
5
6
6

7
9

9
9
9
9

10
10
10
11
11
11
11

Use & Operation
Wine Storage

Nek Prop

Care & Cleaning

Cleaning
Power Failure
Defrost
Vacation
Moving
Disposal

Troubleshooting
Warranty

12
12
12

13
13
13
13
13
13
13

14
15

www.silhouetteappliances.com 2

Welcome,

Thank you for your purchase. We are confi dent that your Silhouette Reserve will provide
decades of service for your family. This product is the culmination of years of research into
understanding out consumer’s needs and wants and then incorporating these into functional
design. This premium product, for the discerning consumer, has been designed to provide
visual temperature identifi cation, superb display lighting and exceptional storage solutions.

Offering one of the strongest warranties in the business, the Silhouette Reserve offers a
comprehensive two year parts and labor warranty. We also encourage consumers to take
a moment to register their product via our website at www.SilhouetteAppliances.com. By
doing so you can take advantage of our extended warranty offers.

Should you have any questions or concerns about the operation of this product we
encourage you to call us at 1-844-455-6097. Our consumer care associates are available
to answer questions Monday to Thursday between the hours of 8:30 - 6:00 pm EST and
Friday between the hours of 8:30 - 4:00 pm EST.

Please take a moment to read this owner’s manual to better understand the unique features
this product has to offer and to maximize your enjoyment.

Enjoy!

If you require assistance,

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual:
It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:
Immediately contact the retailer or builder that sold you the appliance.

Save time and money:
Check the troubleshooting section at the end of this manual before calling. This section will
help you solve common problems that may occur.

1-844-455-6097

3 Consumer Support 1-844-455-6097

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

DANGER: Risk of fi re or explosion. Flammable

refrigerant used. Do not puncture refrigerant tubing.

• Do not use mechanical devices to defrost
refrigerator.

• Ensure that servicing is done by factory
authorized service personnel, to minimize
product damage or safety issues.

WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear
of obstruction.

WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside

the food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.

CAUTION: Risk of fi re or explosion. Flammable
refrigerant used.

• Consult repair manual or owner’s guide before
attempting to service this product. All safety
precautions must be followed.

• Dispose of properly in accordance with federal
or local regulations.

• Follow handling instructions carefully.

CAUTION: Children should be supervised to ensure
that they do not play with the appliance.

DANGER: Risk of child entrapment. Before throwing
away an old appliance:

• Remove the door or lid.

• Leave shelves in place so that children may not
easily climb inside.

SAFETY REQUIREMENTS

This appliance is not intended for use by persons
(including children) whose physical, sensory or
mental capabilities may be different or reduced,
or who lack experience or knowledge, unless such
persons receive supervision or training to operate
the appliance by a person responsible for their
safety.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding
reduces the risk of electrical shock by providing an
escape wire for the electrical current.

This appliance has a cord that has a grounding
wire with a 3-prong plug. The power cord must be
plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be
replaced with a properly grounded 3-prong wall
outlet. The serial rating plate indicates the voltage
and frequency the appliance is designed for.

WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.

Do not connect your appliance to extension
cords or together with another appliance in the
same wall outlet. Do not splice the power cord.

Do not under any circumstances cut or remove the
third ground prong from the power cord. Do not
use extension cords or ungrounded (two prongs)
adapters.

If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualifi ed person in order to avoid hazard.

SAVE THESE INSTRUCTIONS!

www.silhouetteappliances.com 4

INSTALLATION

Unboxing

Warning! Excessive weight hazard!

Use two persons to move and install this appliance
to prevent injury.

Unpacking Instructions:

• Cut the bottom strap.

• Detach the box from the front, back and sides.

• Using two or more persons, slide the box up and
off the appliance.

• Remove the plastic bag.

• Using two or more persons, lift the appliance off
of the foam base.

• Recycle all packing materials.

Installation Requirements

Selecting the proper location will ensure excellent
performance levels for your appliance. Choose a
location where the appliance will not be exposed
to direct sunlight or heat emitting sources such as a
heater or stove.

It is not recommended to install this appliance into a
corner or directly beside a wall. This is to allow the
appliance to have a greater than 90° door opening.

This appliance is front breathing. Do not block the
front air vent as this will result in high operating
temperatures, poor system performance and higher
energy usage.

This appliance is designed for indoor use only.

The listed depth requirement in the below image is
assuming that the electrical outlet is located in the
adjacent cabinetry or is fl ush mounted on the rear
wall.

35 in
(88.9 cm)

25 in
(63.5 cm)

1.5 in (3.8 cm) diameter

*If electrical outlet in
adjacent cabinetry

Electrical AccessElectrical Access

24 in (61 cm)

5 Consumer Support 1-844-455-6097

2 in (5 cm)

6 in
(15.2 cm)

90°

1. Anti-Tip Bracket

2. Screws

3. Cabinet

INSTALLATION

1

2

3

Anti-Tip Bracket Installation

This appliance is intended for built in application.
If the appliance will be used in a freestanding
application, the anti-tip bracket must be installed to
avoid personal injury, damage to the appliance or
loss of contents. If the appliance is not anchored,
fully loaded wine racks that extend 100% will cause
the unit to tip forward and create a dangerous
condition.

Place the appliance against the wall in its fi nal
install location. Place the anti-tip bracket on the
back of the appliance with one side of the bracket
against the wall. Mark the location of the anti-tip
bracket with a pencil and remove the appliance.
Attach the bracket to the wall with the provided
screws and wall anchors. Place the appliance
under the installed anti-tip bracket. The fi t should
be tight to the appliance. Check the soundness of
the installation by applying pressure to the cabinet,
ensuring that the appliance does not tip.

Leveling Instructions

Ensure that the appliance is placed in its fi nal
location. Turn the two leveling legs on bottom of the
cabinet to the right to lower the appliance and to
the left to raise the appliance.

It is recommended on fi rst installation to turn both
leveling legs to the right as far as they will go, until
the top of the feet are touching the bottom of the
cabinet. Then, gradually turn both feet to the left
until the appliance is level and at the appropriate
height.

Once complete, open the door of the appliance and
make sure that the shelves are able to move freely.

www.silhouetteappliances.com 6

INITIAL SETUP

3

s

1. Plug in the appliance

Position the appliance as close to the cabinet
opening as possible while still providing access to
the power outlet. The power cord is 5.3’ (1.6 m)
long and will provide enough slack to plug in the
appliance before moving it into the cabinet cut
out. It is recommended to place the power outlet
in adjacent cabinetry to allow easy access to the
power outlet.

1

Ensure that the appliance

is plugged in

2. Confi rm power

The Silhouette logo in the center of the door will
illuminate to indicate that the appliance is receiving
power. This logo is part of the capacitive touch
interface.

3. Turn the appliance on

Touch and hold the Silhouette logo for three
seconds. The interface will count down from three
and will then display “on”, accompanied by an
audible beep. This indicates that the appliance
is turned on and is ready to begin initial set up
procedures.

Illuminated icon indicates

2

that the unit has power

3

hold

4. Initiate Setup

Initial setup is only required the fi rst time the
appliance is plugged in. Once completed, initial
setup will not need to be redone in the event of
a power failure. The appliance only advances to
operation mode once setup is complete.

During the setup procedure, a fl ashing icon
indicates that the user should interact with that icon
to advance the setup steps.

7 Consumer Support 1-844-455-6097

Hold the Silhouette icon for

3 seconds to power on

Setup begins when

4

temperature icon flashes

Follow 1st time setup

sequence to begin operation

INITIAL SETUP

5. Initial setup procedure

Upper Temperature Zone

The upper temperature zone icon will fl ash,
displaying “00”. Touch the “+” and “-” icons to
increase or decrease the set temperature of the
upper zone in 1° increments. When the desired
temperature is selected, touch the temperature
display to confi rm the selection.

Lower Temperature Zone

Once the upper temperature setting is confi rmed,
the lower temperature icon will fl ash “00”. Touch
the “+” and “-” icons to increase or decrease the
set temperature of the lower zone in 1° increments.
When the desired temperature is selected, touch the
temperature display to confi rm the selection.

The temperature for both zones can be set between
41°F - 64°F (5°C - 17°C).

Primary Menu

Audio

Temperature Scale

The temperature scale icon will fl ash. Touch this
icon to toggle between Fahrenheit and Celsius
temperature scales. Depending on the selected
scale, a “C” or an “F” will illuminate beside the
temperature readout inside the ring.

Display Settings

The display interface can be set to continuous
illumination or it can be turned off. When the
display icon is fl ashing, touch it once to set the
display to “on” and the icon will illuminate at 100%.
Touch this icon again to set the display to “off” and
the icon will illuminate at 50%.

If the display is set to “off”, the icons required for
the setup procedure will remain active at 50%
illumination until the setup is complete, at which
point the display will turn off until interacted with,
except for the Silhouette logo, which remains
illuminated at 50% to indicate that the appliance is
still in operation. The display will illuminate once the
door is opened and will remain illuminated for two
minutes after the door is closed.

The audio icon will fl ash. Touch the audio icon once
to maintain audible prompts and the icon will be
100% illuminated. Touch the audio icon a second
time to silence audible prompts and the icon will be
50% illuminated.

www.silhouetteappliances.com 8

INITIAL SETUP

FEATURES

Interior Lighting

There are three light option icons which will all fl ash
simultaneously between 50% and 100% illumination
until user input is provided. Touch the desired
interior lighting icon and it will change to steady
illumination at 100%.

Bank Lighting

When bank lighting is chosen, the interior lights
are set to 100% illumination for three hours. If the
appliance receives no user input within three hours,
for example if the door is not opened or the display
is not touched, the lights will turn off. If the door is
opened or the display is interacted with, the lights
will turn on and remain on for three hours, again
turning off if the appliance receives no user input
within that time. Any time the appliance receives
user input, the three hour counter restarts.

Theater Lighting

When theater lighting is chosen, the interior lights
are set to 35% illumination for two minutes before
turning off. If the door is opened, the lights will
illuminate at 100% for as long as the door is open.
When the door is closed, the lights will fade to 35%
for two minutes before automatically turning off.

Energy Saving Mode

Temperature Display

The temperature display is a rolling average
algorithm of the actual temperature inside the
appliance. The temperature readout will only
display set temperature when the user is adjusting
the zone.

Door Ajar Alarm

To mitigate any excessive temperature swings or
energy usage as a result of the door being left
open, this appliance comes equipped with a door
ajar alarm. In the event the door is left open for
more than 5 minutes, the temperature rings will turn
red and fl ash. If the audio prompts are active it will
also beep. To stop the alarm, ensure the door is
completely closed.

Interface Lock

The display interface can be locked so that options
cannot be changed accidentally. To set the interface
lock, touch and hold the menu icon for three
seconds to open the secondary menu, then touch
the lock icon and then touch the fl ashing menu
icon to confi rm. Once set, the small lock icons will
illuminate inside the colored temperature rings. To
unlock the interface, touch and hold the menu icon
for 3 seconds, then touch the lock icon and touch
the fl ashing menu icon to confi rm.

When energy saving mode is chosen, the interior
lights will remain off until the door is opened. If the
door is opened, the lights will illuminate at 100% for
as long as the door remains open. When the door is
closed, the lights will turn off.

6. Ready for operation

The appliance is now set and ready for operation.
The initial setup procedure is only required the fi rst
time the appliance is plugged in and will not be
required again if the appliance looses power or is
unplugged.

To adjust settings in future, touch the Silhouette logo
to activate the menu icon and then follow the steps
necessary to adjust the desired setting through the
primary or secondary menu options.

9 Consumer Support 1-844-455-6097

Sabbath Mode

When activated, Sabbath mode allows the
refrigeration system to continue to operate but the
interior lighting, interface display and any audible
sounds are disabled. Only the Sabbath icon, the
power mode icon and the Silhouette logo will be
illuminated.

To engage, touch and hold the menu icon for three
seconds to open the secondary menu. Touch the
Sabbath icon. The power mode icon and menu icon
will illuminate 100% and the rest of the display will
turn off. Touch the fl ashing menu icon to confi rm.

To deactivate Sabbath mode, touch and hold the
menu icon for three seconds to open the secondary
menu. Touch the Sabbath icon to deactivate the
setting and touch the fl ashing menu icon to confi rm.