Daewoo DPP-42A1LASL Instruction Manual

48586220E10Y-R2

PLASMA DISPLAY

USER’S MANUAL

D P P - 4 2 A 1 L A S B

D P P - 4 2 A 1 L A S L

Proper use guarantees product life.

Before using the product, be advised that you read this owner’s manual well and try to operate it.

Features

•42” VGA wide Plasma Panel

•Built in 2-Analog Tuners

This PDP has 2-analog tuners inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver.

•Support Picture-in-Picture (PIP)

•DVD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiver

DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be viewed.

• PC Direct Connection

PC can be connected to the PDP without a separate device and can be used as a monitor making it ideal for presentation, various events and exhibitions.

•160o Wide-Angle Viewing Area

•Flat Panel with No Distortion and Colour Blurring

Since Plasma TV has no problems such as distortion, blurring, flickering unlike existing CRT type displays you can enjoy Home Cinema picture quality and sound.

• Various Video Control

- 17 Languages OSD - Full-screen still function

-Various aspect ratio (16:9, 4:3, Panorama, LB(16:9), LBS(16:9), 14:9, LB(14:9), LBS(14:9), Auto)

•Free Volt (100-240V~, 50/60Hz)

•DVI (Digital Visual Interface) Connection

Using the DVI Input, you can receive directly a digital signal from the computer. Consequently, pictures on the screen are much more clear and fresh.

• MGDI (Meta Genuine Digital Image) Engine

MGDI is the image enhancement technology designed by Daewoo Electronics, which provides more clear, realistic, and delicate images.

This Owner’s Manual presents safety precautions and how to use the product. After reading it thoroughly, use the product safely.

Keep this manual where the user can see it easily.

Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury.

Safety Precautions

Always obey all safety messages.

•All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet.

•Do not disassemble or replace any parts of the TV.

Refer to a qualified service personnel for repair.

WARNING

You can be Killed or seriously injured if you do not follow these instructions.

Power

During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.

It can result in fire.

This product must be properly grounded.

•Improper grounding may cause malfunction or electric shock.

•When proper grounding is not possible, install circuit breaker.

•Do not ground to gas pipe, water pipe, lightning rod, or telephone line.

Installation

Do not use this product in the neighborhood of a bath or shower.

It can result in electric shock or fire.

When unplugging your TV, always grip the plug firmly and pull straight out from the socket.

It can result in fire or electric shock due to damaged power cord.

During a lightning storm, unplug the TV from the wall outlet, and do not touch the antenna.

It can cause fire or electric shock.

Do not place this TV on an unstable cart, stand, or table

It may cause the product and cart to overturn, damaging equipment or causing possible injury.

4

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Spilled liquids may cause electric shock or fire.

Do not disassemble batteries, and do not leave around in case children swallow them.

Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to hospital and consult with a doctor.)

Batteries could explode if fitted incorrectly. Align the batteries according to the (+) and (-) indication inside the case.

During Use

Do not open the cover (or back) because high voltage is present within the TV enclosure.

It may cause electric shock.

Do not allow children to play or hang on the TV.

These actions may tip it over, causing personal injury.

Do not spray water onto the TV or wipe with damp cloth.

It may cause an electric shock or fire.

Never push any kind of objects into this product through openings at the back of TV.

It may cause fire or electric shock.

Do not place a candle or lighted cigarette on the TV.

If these fall into the inside of the tv, it may cause a fire or explosion.

Unplug the TV from the wall outlet when smoke or a strange smell occurs, then refer to a service personnel.

Leaving the TV on in this condition, may cause fire or electric shock.

5

Safety Precautions

Always obey all safety messages.

•All the safety and operating instructions should be read before the product is operated.

CAUTION

You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions.

Power

When moving your TV, remove the power plug, antenna, and cables, and be sure to move it by using two people..

Failure to follow this instruction can result in electric shock or personal injury.

Installation

Do not install the product where there is oil, smog, moist, or dust

It may cause malfunction.

For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm (4inches).

Due to the increase of temperature inside the TV,

If you wish to wall or ceiling,

Failure to do so may and injury to human

Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.

It can result in a risk of electric shock.

where it will be exposed to product should not be radiators, stoves, etc.

Minimum distances around the apparatus for sufficient ventilation.

Due to the increase of temperature inside the TV, it may cause a fire.

When using an outside antenna system, do not install it in the vicinity of overhead power lines.

If the antenna touches such power lines, it may cause electric shock.

6

The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent ghost image to remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

The warranty does not cover any damage caused by image retention.

When TV is service

When the period of malfunction

During Use

Do not wipe the TV using a cloth damped with chemicals (benzene, thinners, etc.).

The TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.)

Do not place any object or cover on the TV.

In an event of improper ventilation, the TV will be overheated causing fire.

When the TV is placed table, the front side not project outward.

Unbalance may cause resulting in personal injury malfunction and damage

Do not place heavy objects or heat sources on the power cord.

It may damage the power cord, causing fire or electric shock.

When watching the TV, the distance between the TV screen and your eye should be 5~7 times the diagonal size of the TV.

Watching the TV for a long time may hurt your eye sight.

Do not grip speakers when moving the TV attached with speakers.

When moving the TV while gripping speakers, the speakers may fall from the TV due to its weight, causing personal injury.

7

Checking Accessories

Note

Check to be sure that the following items are

packed with your Plasma panel.

Supplied Accessories

1UNIT

Ferrite Core

1UNIT

	SAT	CATV
/DVD
TV VCR
		STILL
RECALL		AV
TV

CO	M
V
O
L

P

PR		P
NT		C/D
		VI
O N
					V
					O
	MENU				L
					ZE
					SI
				R E	E N
PR			C
EV
PR	PR
					SLEEP
		?
	X
		UND				I-II
	PICT.	SO		E
		MOD
	MODE

			P	PR
			N SWA
PIP	POSITIO
				PR
S.EFFECT		SOURCE			P
				LOW STO
			Y F.F/S
	LOW PLA				PAUSE
F.R/S			OPEN/	NEXT
	PREV		CLOSE

For Scart

(1 unit)

Batteries (option)

1UNIT

AC Cable 1 UNIT

8

Note

Optional Accessories

The following items are optional accessories.

Refer purchasing optional accessories from Daewoo Electronics Local Retailers or the retailer from where you purchased the unit.

Table Top Stand

Wall Mounting Unit

9

CONTENTS

PREPARATION

4 • Safety Precautions

8 • Checking Accessories

12 • Panel Controls

14 • Remote Control

15 • Remote Control Setup

CONNECTION

16 • Antenna Connection

18 • To Watch TV

20 • Install Program

26 • Watching Digital Broadcasts

28 • Watching Cable Broadcasts

30 • Watching Satellite Broadcasts

32 • Watching a DVD Image

34 • Watching a VCR Image

36 • Watching a Camcorder/Game Console Image

38 • Connecting PC(15Pin D-Sub)

40 • Connecting PC(DVI)

APPLICATION

44		• Selecting Picture Mode	59	• MENU Background, Language
45 • Customising Picture				and Child Lock Setting
47		• Adjusting Screen	61	• MGDI (Meta Genuine
50		• Watching a Still Image		Digital Image)
51		• Watching Two Pictures	63	• Time Setting
		Simultaneously	65	• Image Sticking
53		• Adjusting Sound Mode		Minimisation(ISM)
54		• Customising Sound Mode	67	• Initialize Setting
57		• Selecting INPUT SIGNAL	69	• Setting Sleep Timer
58		• Checking the Current Input Signal	70	• Teletext

MISC.

72 • Before Requesting Service

73 • Specifications

11

Panel Controls

Front Panel, Rear Panel

*Items having the same names on the plasma display and the remote control would function in exactly the same way.

Front / Side

AV3

R-AUDIO-L VIDEO S-VIDEO

STAND-BY/OPERATE	INPUT SELECT
ON/OFF	MENU

		+
	VOLUME
Power Standby:		-
		+
Red - Standby
Green - ON	MOVE / PR
Control sensor		-

Select when adjusting volume or select/adjust “MENU.”

Press when moving “MENU” or “Program”

12

Rear

DVI-D INPUT

AV1

AV2

ANT

										Power
							ANT
	INPUT	(15 pin D-sub)	(DTV/DVD INPUT jacks)		INPUT/OUTPUT,			manufacturing(or
					Cable Receiver			manufacturer use only)
					INPUT/OUTPUT jacks

13

Remote Control

*The number in ( ) indicates the page in which the function of each button is explained in detail.

TV/VCR/DVD/SAT/CATV

19 Channel Number (0~9)

Use to select channel directly 0~9

58 Recall

Indicates the current state and resolution.

TV

Press to select TV Mode.

COMPONENT, PC/DVI

Press to select COMPONENT or PC/DVI modes.

20 Menu button

Used to display a main menu.

Previous Program button

It returns to previous channel.

Mute button

Mute sound.

44 Picture Mode button

Whenever pressing the button, it cycles in the following order.

Normal -> Dynamic -> Cinema -> User

53 Sound Mode button

Whenever pressing the button, it cycles in the following order.

Normal -> Movie -> Music -> News -> User

Sound Effect button

Press to use a spatial sound effect

TV VCR/DVD SAT CATV

RECALL

TV

PR

			T
			N
			E
			N
			O
		M	P
C	O

V

O MENU L

P

R

E

V

PR

PR

STILL

AV

P
C
	/
	D
		V
			I
					V
					O
					L
			S	I Z	E
		N
	E
E
R
C
S

SLEEP

?

X

PICT.	SOUND
MODE	MODE	I-II

PIP	POSITION	SWAP	PR
S.EFFECT SOURCE			PR
F.R/SLOW PLAY		F.F/SLOW	STOP
PREV	OPEN/	NEXT
	CLOSE		PAUSE

Note

•Use two “AAA” batteries.

•Be sure to use replacement batteries of the same type as the original ones.

•The life of a battery depends on how much it has been used.

Power button 19

Pressing the power button of the TV allows the display to be put in standby. (A red light is shown in the remote control sensor.) At this time, if you press the power button of the remote control, the display is turned ON (And shows a green light in the sensor).

Still 50

Used to view a still picture whilst watching moving images.(Sound can be heard.)

AV

Press to selet AV modes.

It changes in the following sequence AV1 ->AV2 ->AV3

PR button ▼/▲Adjusts the channel. Volume button / Adjusts the volume.

Screen Size button 47

Adjusts the size of the screen (16:9, 4:3, Panorama etc.)

Sleep Timer 69

Each time you press this button, a different input mode appears. The sequence is as follows: 15Min. -> 30Min. - > 60Min. -> 90Min. -> 120Min. -> OFF

After the time is selected, the TV automatically goes into a stand-by state.

Teletext Function 70

l - ll

-Selects the language during dual language broadcast.

-Selects mono sound during stereo broadcast.

PIP Mode Function 51

VIDEO/DVD Function

		When using remote control:		Installing the batteries in your remote control:
		• Be sure not to allow the remote control to drop or to become wet.		• Push to open the cover of the remote control
		• Keep it away from hot or moist locations.		• Put the batteries in the battery cell after checking the

14

Remote Control Setup

Remote Control supporting the multi brand devices.

-The remote control provided is designed to operate the Daewoo PDP set.

-However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control.

Notices:

-All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.

-Some of the products may not be applied because of different signal system.

-This is only for the basic control of the devices.

HOW TO SET UP THE REMOTE CONTROL FOR USING OTHER DEVICES .

•Turn on the device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver)

•Press the device selection button of remote control until it is flickering. It takes about 3 seconds.

•Press the assigned three digits code of the device using number key button of the remote control toward the IR receiver of the device. The code number is provided below. Whenever pressing the number, the device selection button will be flicked once.

•If the code is set properly, the device will turn off automatically. If not, repeat the process 3.

•As the device is turned off, press the flickering device selection button of the remote control once. Then the lamp of the button will be turned off.

•Now, the setting-up of the device can be controlled by Daewoo PDP remote control.

Remote Control Setup Code

	VCR (STANDARD : 002)										SAT (STANDARD : 002)
	Maker (Brand) Name	Code Number (3 digit) List									Maker (Brand) Name	Code Number (3 digit) List
	DAEWOO	002	008	060	062	063	067			DAEWOO		002
		068								PHILIPS		018 031 032
	JVC	003	006	009	043	044	046			SAMSUNG		079
		084	089
		111	114	124
	MITSUBISHI	046	052	075	122
	PANASONIC	016	070	087	088	106
	PHILIPS	005	040	042	045	048	049
		053	064
		078	081	090	108
	SAMSUNG	041	055	056	059	061	065
		066	091	095
	SHARP	048	049	057	074
	SONY	047	050	051	076	080
	DVD
	DAEWOO	152 160
	LG	150 168 169
	PANASONIC	157 170
	PHILIPS	155
	SAMSUNG	151 163 164

15

Antenna Connection

CTV Antenna Connection

TV antenna installation may be found in most.

When a coaxial cable is used

Plug the coaxial cable to the antenna socket, and fix it firmly.

ANT/CABLE 1

Coaxial cable

When a feeder cable is used

ANT/CABLE 1

Outdoor Antenna Connection

Outdoor antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses

Single Antenna Connection.

VHF Antenna

UHF Antenna

ANT/CABLE 1

Separate Antenna Connection.

VHF-Antenna

In case of coaxial cable

In case of feeder cable

UHF-Antenna

ANT/CABLE 1

Antenna combining adapter

(separate purchase)

17

To Watch TV

To Watch TV

-The buttons on the keypad in the PDP unit, which have the same name as those on the remote control, perform the same function as the remote control.

Press the “ON/OFF” button of the PDP unit.

•The “▼PR▲” or power button of the remote control and the keypad on the PDP unit would be operated only when the "AC Power" of the PDP unit is supplied. Otherwise, neither the remote control nor keypad of the PDP unit can turn on the PDP.

When pressing the program button

•Select two digits if using the number button for Program selection.

For example, to watch Program No.9, press the number buttons 0 and 9.

If pressing only number 9, it takes more time than pressing two digits for selecting a channel.

To mute the sound

1.Press the “ ” button.

2.No sound is heard if “MUTE” is displayed on the screen.

3.Sound is heard again if pressing the “ ” button once again.

For example, you can use this button when telephone rings or when guest comes while watching TV.

Check of TV operation status

•If pressing the “RECALL” button, the status of the program or broadcasting being currently watched or entry status of video component is displayed on the screen.

Auto Power Off

•If TV broadcast for the day is finished, the TV will automatically turn off after about 30 minutes. However, if the Off-timer or Sleep timer is operating, it takes precedence. This auto power off feature only operates in the TV mode.

TV VCR/DVD SAT CATV

	RECALL				STILL
		TV			AV
			T	PR
			N
			E		P
			N
			O		C
						D
		M	P			/
	O						V
C								I
V				MENU							V
O											O
L											L
P								S	I	Z	E
R
	E						N
		V
			P			E
					E
			R		C
					R
				PR	S
				?	SLEEP
			X
	PICT.			SOUND
MODE				MODE	I-II

PIP	POSITION	SWAP	PR
S.EFFECT SOURCE			PR
F.R/SLOW PLAY		F.F/SLOW	STOP
PREV	OPEN/	NEXT
	CLOSE		PAUSE

18

Press the “ON/OFF” button.

1

ON/OFF

• Press the “ON/OFF” button of the

PDP unit.

• The LED of the PDP unit turns red

colour.

• Press the “▼PR▲” , power button of

the remote control, or any button on

the keypad of the PDP unit.

• The LED of the PDP unit turns

“green” colour and the TV turns on.

• To watch analog TV broadcasts,

select the correct input, i.e. 'PR' in

the on screen display box.

2

Select Program.

T

PR

• Select the desired program by

pressing the “▼PR▲” button or

N

E

P

N

C

O

/

D

M

P

V

the number button.

C

O

I

V

MENU

V

Ex) Program 09

O

O

L

L

P

S

I

Z

E

R

E

N

V

P

E

E

R

R

C

S

PR

PR 09

_ _ _ _ _

MONO PM 12 : 00

Adjust Volume.

3					PR		•Sound reduces if pressing the
				T			“ VOL” button.
						PC/
				N
				N
				E
				O		D
			M	P		V	• Sound increases if pressing the
	C	O				I
	V				MENU	V	“VOL ” button.
	O					O
	L					L

P

R

E V PR

PR

		N
	E
E
R
C
S

S

I

Z

E

Volume		10

4	Press the “Power” Button to Turn the TV off.
	• TV turns off and the LED of
	the PDP unit changes to red
	colour.

19

Install Program

Auto Setup

-This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply find programs with “▼PR▲” buttons and so need not select programs by pressing each program number.

-Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the “▼PR▲” button or Number buttons to scan the stations you programmed. Stations can be tuned using “Auto Setup” or “Manual Setup”.

1

Press the “Menu” Button.

PIP

S.EFFECT

FR/S

								TV	VCR/DVD
										SAT
											CATV
			RECALL
			TV						STILL
		NE			PR				AV
	O		NT
	P
	M
	O
	C
									P
	V								C
									D
	O								/
									I
	L								V
			MENU
	P								V
	R
	V								O
	E
	P								L
	R
								E
								IZ
	PR							S
					R			N
							E
					SC	E
	?			SLEEP
	X
PICT.
MODE	SOUND
	MODE
	I
	-II
POSITION	S
	W
	AP
SOURCE	PR

PR

			T
			N
			E
			N
			O
		M	P
C	O

V

O MENU L

P

R

E

V

PR

PR

P
C
	/
	D
		V
			I
			S	I Z
		N
	E
E
R
C
S

V

O

L

E

•The menu screen appears as follows.

•Press the “▼PR▲” button and select “Install”.

	Mode	Normal
Picture	Brightness	50
	Contrast	50
Sound	Sharpness	8
	Colour	50
Screen	Colour Temp.	Normal
	N.R.	NR1
Feature	CTI	On
Install
Move	Select	MENU Exit

2				O		D		“ VOL ” Button.
	Press the
				T	PR
				N
				E	P
				N
					C
			M	P		/
							V
	C	O						I
	V				MENU						V
	O										O
	L										L
	P							S	I	Z	E
	R
		E					N
			V
				P		E
					E
				R	C
					R
					S

PR

Auto Setup

Picture Edit

Manual Setup

Sound

Screen

Feature

Install
Move	Select	MENU Exit

20

3				O		D
	Select the “Auto Setup”.
					PR						• Select the “Auto Setup” with the
				N							“▼PR▲” button.
					PC/
				T
				N
				E
			M	P			V				• Then press the “ VOL ”
	C	O						I
											button.
	V
					MENU						V
	O										O
	L										L
	P							S	I	Z	E
	R
		E					N
			V
				P		E
					E
				R	C
					R
					S

PR

Auto Setup

Picture Edit

Manual Setup

Sound

Screen

Feature

Install
Move	Select	MENU Exit

4

O

D

Select the “Country”.

PR

• There are 18 countries for

T

selection. Choose the desired

PC/

N

N

E

M

P

V

country before starting the

C

O

I

V

MENU

V

search.

• If there is no proper country,

L

L

O

O

P

S

I

Z

E

select the "Others".

R

E

N

V

P

E

E

R

C

R

S

PR

Auto Setup

Picture	Country	Others

Search

Sound

Screen

Feature

Install
Move	Adjust	MENU Exit

5

Select the “Search”.

PR

• Press the “VOL ” key to

start searching.

T

PC/

N

N

E

O

D

M

P

V

• Then it automatically searches

C

O

I

V

V

channels as on the right.

Auto Searching...

MENU

• While searching, if you press the

O

O

L

L

"Menu" button, the automatic

15%

Z

E

P

S

I

channel search is stopped. But,

0

Channels Found...

R

EN

V

E

P

E

R

C

channels searched by that time

PR

R

S

are saved.

MENU Exit

Auto Search is completed.

6

PR

• Edit menu appears as on the

T

D

right if the search is completed.

O

N

E

P

N

C

M

P

/

• Refer to “Edit” on the following

V

C

O

I

V

V

pages.

MENU

• The order of stored program

O

O

L

L

may differ among countries.

Z

E

P

S

I

R

E

N

V

P

E

E

R

C

R

S

PR

Edit

	01		BBC1	11			C39		-----21
	02		C77	12			C39		22 -----
	03		S06	13			-----		23 -----
	04		C07	14			-----		24 -----
	05		C11	15			-----		25 -----
	06		C25	16			-----		26 -----
	07		C33	17			-----		27 -----
	08		C34	18			-----		28 -----
	09		S4C	19			-----		29 -----
	10		C36	20			-----		30 -----
		Adjust						MENU			Exit
		Move				Delete					Skip

21

Edit

TV VCR/DVD SAT CATV

	RECALL				STILL
		TV			AV
			T	PR
			N
			E		P
			N
			O		C
						D
		M	P			/
							V
C	O							I
V				MENU							V
O											O
L											L
P								S	I	Z	E
R
							N
		V
	E					E
			P
					E
			R		C
					R
				PR	S
				?	SLEEP
			X
	PICT.			SOUND
MODE				MODE	I-II

PIP	POSITION	SWAP	PR
S.EFFECT SOURCE			PR
F.R/SLOW PLAY		F.F/SLOW	STOP
PREV	OPEN/	NEXT
	CLOSE		PAUSE

Deleting the Program.

1				PR	• Place the selection bar on the program that you want to delete using the
			N		“▼PR▲” and “ VOL ” buttons.
				PC/
			T
			N
			E
			O	D
		M	P	V	• Press the Delete(Yellow) button.
C	O			I
V					• The deleted program goes to PR number 99 for recover.
				MENU	V
O					O
L					L

P

R

E V PR

PR

		N
	E
E
R
C
S

S

I

Z

E

SLEEP

?

X

PICT.	SOUND
MODE	MODE	I-II

			Edit
	01	BBC1	11	C39	-----21
	02	C77	12	C39	22 -----
	03	S06	13	-----	23 -----
	04	C07	14	-----	24 -----
	05	C11	15	-----	25 -----
	06	C25	16	-----	26 -----
	07	C33	17	-----	27 -----
	08	C34	18	-----	28 -----
	09	S4C	19	-----	29 -----
	10	C36	20	-----	30 -----

		Adjust			MENU		Exit
		Move		Delete			Skip

2			Program Positions
			Place the selection bar on the program that you
			to move.
			Press the Move(Green) button.
			• It becomes ready for moving as the colour of
PICT.	SOUND		selection changes to green.
MODE	MODE	I-II	• Move the program that you desire to move to the

wanted PR number.

•Press the Move(Green) button again to finish. The colour of selection changes to yellow.

3

E

Skipping the Channels

PR

• Using “▼PR▲” and “ VOL ” buttons, place the

T

selection bar on the program that you want to skip.

C/

N

N

P

O

D

M

P

V

• Press the Skip(red) button.

C

O

I

V

MENU

V

• The colour of the program changes to red.

O

O

• The program will be skipped.

L

L

R

I Z

E

• In order to cancel skip state,press the Skip(red) button

P

S

E

N

again.

V

P

S

E

E

R

C

R

PR

22