AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Measurements made with 120VAC mains. Line current figures for 230VAC units derived by multiplying 120VAC figures by 0.5.
Data based on all channels driven.
CTs 1200
Load
At Idle
1/8th Power Pink Noise 8 Ohms/Ch.
Typical of program material 16 Ohms Bridge
just at clip. 4 Ohms/Ch.
8 Ohms Bridge
2 Ohms/Ch.
4 Ohms Bridge
70V/Ch. 600x2
140V Bridge 1200
1/3rd Power Pink Noise 8 Ohms/Ch.
Typical of program material 16 Ohms Bridge
with severe clipping. 4 Ohms/Ch.
8 Ohms Bridge
2 Ohms/Ch.
4 Ohms Bridge
70V/Ch. 600x2
140/200V Bridge 1200
Rated
Power
600x2
1200
600x2
1200
250x2
500
600x2
1200
600x2
1200
250x2
500
Line Current
120VAC
Line Current
230VAC
watts in
Watts
watts out dissapated
Thermal Dissipation
Btu/hr kcal/hr
60 0 60 205 52
7.6 3.8 641 157 484 1651 416
10.0 5.0 872 151 720 2458 620
8.8 4.4 1330 405 925 3158 796
7.6 3.8 641 157 484 1651 416
11.5 5.7 996 403 593 2025 511
15.5 7.8 1372 405 967 3300 832
1217 168 1050 358213.4 6.7
11.5 5.7
996 403 593 2025 511
903