Condtrol Unix360 Green pro User Manual

CONDTROL UniX 360 Green Pro

ОПИСАНИЕ ПРИБОРА 27

УКАЗАНИЯ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ 28
РАБОТА С ПРИБОРОМ 29
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ 30
ПРОВЕРКА ТОЧНОСТИ 31
УХОД И ЭКСПЛУАТАЦИЯ 34

ГАРАНТИЙНЫЕ ОБЯЗАТЕЛЬСТВА 35
СЕРВИС И КОНСУЛЬТАЦИОННЫЕ УСЛУГИ 35

EN CONTENTS

PROD UCT DESCRIPT ION 9
SET 9
SAFETY REGULATIONS 10
OPERATION 11
SPECIFICATIONS 12
ACCU RACY CHECK 13
CARE AND MAINTENANCE 16
UTILIZATION 16
WARRANTY 17

DE INHALT

BESTIMMUNGSGEMAESSER GEBRAUCH 18
LIEFERUMFANG 18
SICHERHEITSHINWEISE 19
BETRIEB 20
TECHNISCHE SPEZIFIKATIONEN 21
UEBERPRUEFUNG 22
PFLEGE 25
ENT SORGUNG 25
GARANTIE 26
WARTUNG UND REPARATUR 26

RU СОД ЕРЖА НИЕ

КОМПЛЕКТАЦИЯ 27

УТ ИЛИЗАЦИ Я 35

3

CONDTROL UniX 360 Green Pro CONDTROL UniX 360 Green Pro

A

C

B

D

4

5

CONDTROL UniX 360 Green Pro CONDTROL UniX 360 Green Pro

E

F

G

1

8

1

2

10

9

4

3
5

6

7

6

7

User manual

CROS S LINE L ASEREN

CONDTROL UniX 360 Green Pro

CONDTROL UniX 360 Green Pro

H

18

17

12

11

13

15

14

16

PRODUCT DESCRIPTION

This cross line laser UniX 360 Green Pro CONDTROL is intended for determining and checking
horizontal and vertical lines. (see figure A- C). This mode allows constructing inclined planes
(see figure D).
The measuring instrument is suitable for operation in enclosed working sites and outdoor.

It has 2 operation modes:

- working with automatic levelling. Levelling function automatically compensates
irregularities within the self-levelling range of ±5°(see figure E,F).

- working without automatic levelling for inclined planes. (see figure D)

PULSE mode allows to use laser receiver to increase a working range of the instrument or to
work when laser is hard to define in bright lighting conditions.

1 - Laser lines aper tures
2 - Switch on/off laser lines
3 - Activate pulse mode / locked mode

4 - Low battery indicator

5 - Pulse mode indicator
6 - Battery cover

7 - Tripod thread 1/4’’

8 - Switch bar
9 - Screw mount
10 - Power plug

11 - Tripod with elevating head 1/4”*
12 - Tripod-Transformer*
13 - Universal Wall Mount *
14 - Pouch
15 - Laser intensive Glasses*
16 - Electronic Receiver*
17 - Tripod 1/4’’*
18 - Universal mount Clamp*

* not included in the delivery set

SET

Cross line laser – 1 pc.
Pouch – 1 pc.

Batteries (type АА) – 4 pcs.

Power cable – 1 pc.
User manual – 1 pc.

8

9

User manual

CROS S LINE L ASER

User manual

CROS S LINE L ASEREN EN

CONDTROL UniX 360 Green Pro CONDTROL UniX 360 Green Pro

SAFET Y REGULAT ION S

The user manual should be read carefully before you use the product for the first time.

Unintended use of the product can be dangerous for human’s health and cause serious injur y.

Keep this user manual. If the product is given to somebody for temporary use, be sure to
enclose user manual to it.

- Do not misuse the product

- Do not remove warning signs and protect them from abrasion, because they contain

- Do not look into the laser beam or it s reflection, with unprotected eye or through an optical
instrument. Do not point the laser beam at p eople or animals wi thout the need. You can dazzle
them.

- To protect your eyes close them or look aside.

- It is prohibited to disassemble or repair the product yourself. Intrust product repair to
qualified personnel and use original spare parts only.

- Do not use the product in explosive environment, close to flammable materials.

- Avoid heating the batteries to avoid the risk of explosion and electrolyte leakage. In case of
liquid co ntact with skin, wash it immediately with soap and water. In case of c ontact with eyes,
flush with clean water during 10 minutes and consult the doctor.

information about safe operation of the produc t.

The device belongs to laser product class 2 in
accordance with
EN 60825 -1 with a 520 nm wavelength.

OPERATION

Before start operation remove the batter y cover, inser t the batteries, observing correct
polarity. Put battery cover back. Use alkaline AA bat teries only, all batteries should be of the
same type and brand with the same charge level. If the batteries are low, low battery indicator
and laser lines are flashing simultaneously. Replace batteries or remove batteries from the
laser level and connect it to external power source using the power supply cable included in
the package. It is prohibited to connec t laser level to external power supply if alkaline batteries
(AA) are installed.

Place an instrument on a tripod or on a firm and stable surface.
To switch on an instrument, move the switch bar to ON position. Compensator will unlock.
There are 2 operating modes available:

1) Unlocked mode to project horizontal and vertical laser lines and planes. The compensator

automatically aligns instrument ’s position within the range of ±5°. The laser beam starts to

blink when the instrument is out of the range of automatic compensation.
Short press button to turn on necessary laser lines.

Short press button PULSE to switch on/off pulse mode which allows working with the

rece iv er.

2) Locked mode to project horizontal and vertical inclined planes and lines.
To switch on/of f this mode press a nd hold (no less than 2 se c.) button PULSE . In locked mod e
you can hold the instrument in your hand or place it on a suitable sur face at any angle. Laser
lines will be stable without blinking. Short press but ton to turn on necessary laser lines.
To switch off the instrument and/or prepare it for transportation move the switch bar to OFF
position.

10

11