Condec Source 3000 Quick Start Guide

PORTABLE SOURCE

Source 3000 Portable Pneumatic Pressure Source

STANDARD FEATURES

• Self-contained nitrogen cylinder

• “Overpressure protection”Condec REG 3000
regulator limits pressure to costly units under test

• Charge your internal nitrogen cylinder to 3000 psi
with provided adapter fitting

• Two output (test) ports, for connecting to Device­Under-Test as well as a precision calibration
standard (works with all major name brand
pressure calibrators, digital gauges or indicators)

• Precisely dial into required pressures with
patented valve assembly

Note: Consult factory with your specific Test Port
configuration requirements.

“106594 - NO TOOLS REQUIRED”

APPLICATIONS

• Works with all major manufacturer’s electronic
pressure calibrators

• Truly portable pneumatic source to 3000 psi

SPECIFICATIONS

Internal Pressure Cylinder:

15.2 cubic feet of nitrogen at 3000 psig
133 cubic inches, 3000 psig rating, 5000 psig test

pressure, 6061 aluminum material

Storage Temperature:

0°F to 185°F (-17.8°C to 85°C)

Pressure Media:

Clean dry gaseous nitrogen or equal

Pressure Regulator:

3000 psig, single stage, self venting, non-bleed

Pressure Gauges:

(2) Two-inch diameter, 0-4000 psig

Rupture Disc:

3200 psig nominal, stainless steel outer case

Pressure Filter:

20 micron nominal, field replaceable

Control Valves:

Orion 2C, micro-metering valve, replaceable soft seat,
aluminum and stainless steel

• 15.2 cubic feet of nitrogen at 3000 psi

• Aluminum carrying case

• Front panel gauges inform operator of internal
cylinder pressure level

• Different technicians can operate the system and
get identical results...every time

• Pneumatic only - no hydraulics or distilled water
messes

• Nitrogen source for a full day of calibrating

Piping:

All stainless steel, seamless

Test Ports:

(2) Two, 5000 psig rated 3000 psig operating, 300
series stainless steel

Pressure Fittings:

Input fitting: 1/4 in. 37° female AN swivel on one end
and 1/8 in. NPT male on other, to go to customer
input hose

Output test ports: stainless steel quick-disconnect
on one end and 1/4 in. NPT female on other, to go to
customer output hose

Case:

All aluminum case with latched cover and handle

Weight:

25 lb (9.07 kg)

“107288 - NO TOOLS REQUIRED”

PORTABLE SOURCE

DIMENSIONS

A 18.0 in. (457.2 mm)
B 11.5 in (292.1 mm)
C 7.2 in. (182.8 mm)

30

© 2014 Rice Lake Weighing Systems January 1, 2014 Prices and specifications subject to change without notice. Visit www.4condec.com for further information.

PORTABLE SOURCE

Source 3000 Portable Pneumatic Pressure Source

MODEL/PRICE

PART # DESCRIPTION

Source 3000 pneumatic pressure
source (Buna-N Seals & Standard

65315

98916

98917

131385

Note: Consult factory with your specific Test Port configuration requirements.

58483

55394 or 130239

Female Quick-Disconnect Output (test)
Ports and 7/16 -20 AN-4 male Fill Port)
Note: Fill Port requires one (supplied)
Cheat Seal PN 54854

Source 3000 with Swagelok QC4
Quick-Disconnect Female Output (test)
Ports and QC4 Quick-Connect Male Fill
Port (Buna-N Seals)

Source 3000 with Ralston male quick­test/check-valve Output (test) Ports and
Standard 7/16 -20 AN-4 male Fill Port
Note: Fill Port requires one (supplied)
Cheat Seal PN 54854 (Buna-N Seals)

Source 3000 with 7/16 -20 AN-4
Male Output (test) Ports and Fill Port
(Buna-N Internal Seals) Note: Each Port
requires one Cheat Seal PN 54854

EST. SHIP
WEIGHT

29 lb Consult

29 lb Consult

29 lb Consult

29 lb Consult

PRICE

OPTIONS/ACCESSORIES

PART # DESCRIPTION PRICE

79423

78939

67248

65546 Additional operation and maintenance manual Consult

58483

54854 Additional cheat seal (used with fill port hose 78939) Consult

153097

55294

55394

130239

106594

107288

Source 3000 tool/hose canvas carrier
(fits in top cover of unit)

Fill port hose (input) 5 ft. long hose with CGA-580 male
nipple on one end and 7/16-20 JIC 37º female AN-4
swivel on other end

Output (test) port 5 ft. long hose with quick­disconnect plug (SST) on one end and 7/16-20 JIC 37º
female AN-4 swivel on other end, for Source 3000 (PN

65315)

Pressure trap, for Source 3000 (PN 65315)
Literature sheet PN 58609

Standard Input (fill) port input hose fitting,
female 7/16-20 AN-4, 37 degree swivel to 1/8-27 NPT
male SST 10,000 PSI working pressure for Source 3000
(PN 65315) input port (Consult factory for additional fill
port adapters.)

Output (test) port male quick-disconnect adapter
assembly, male coupling body to (finger tighten) 1/4
female NPT other end, 5000 PSIG working pressure
(for quick changing between various DPDG
models,when used between Source 3000 (PN 65315)
test port adjustable adapters and CONDEC DPDG gauge)

Standard output (test) port quick-disconnect fitting,
male coupling body/female 1/4 NPT, 5000 psig working
pressure (for mating between CONDEC DPDG and
UPC5000 or Source 3000 (PN 65315))

Output (test) port quick-disconnect fitting, male cou­pling body/female 1/8 NPT, 6500 psig working pressure
(for mating between DUT and UPC5000 or Source 3000
(PN 65315))

Output (test) port quick-disconnect adjustable
adapter assembly, male coupling body to 1/8 NPT
Swivel other end, 5000 psig working pressure
(for hands-free display reading when used between
Source 3000 (PN 65315) test port and CONDEC 3030,
see pictorial on previous page)

Output (test) port quick-disconnect adjustable adapter
assembly, male coupling body to Female quick-discon­nect swivel other end, 3000 psig working pressure
(for hands-free display reading when used between
Source 3000 (PN 65315) test port and CONDEC DPDG
gauge, see pictorial on previous page)

Consult

Consult

Consult

Consult

Consult

Consult

Consult

Consult

Consult

Consult

55294 -No Tools Required

© 2014 Rice Lake Weighing Systems January 1, 2014 Prices and specifications subject to change without notice. Visit www.4condec.com for further information.

PORTABLE SOURCE

31