Condec DLR334, DLR3110 Specifications

DLR334/DLR3110

Digital Pressure Indicator

Applications

• Test stands

• On-site manufacturing pressure monitoring

• Transfer standard

• Low-cost digital data logging of readings

DLR334 - Table top model

DLR334 -Table top/panel mount model

DLR3110 ­precision patented valve assembly and vernier, test port
and test hose, pressure limit control and monitor.***
Test port may be mounted on front or rear of unit

19 inch rack-mount version of DLR334 plus

Please refer to price schedule for part numbers and
part numbering guide.

Wi

th high-accuracy features and a full range of options,
the DLR334 digital pressure indicator and the DLR3110
19 inch rack-mount are the obvious choice for a wide
range of pressure applications.

From jet engine to automotive, machine tool to general
manufacturing, the DLR334 and DLR3110 are perfect for
use in test stand monitoring. With large red LEDs, select­able resolution, up to 20 selectable engineering units, and
up to 0.05% of reading accuracy, these unique models
provide reliable, repeatable performance up to 10,000 psi.

Flexible features and options also allow the DLR334 and
DLR3110 to serve as a calibrators. Other advantages,
such as a variety of network communications capabili­ties, peak hold and freeze modes, and optional relays and
setpoints, only enhance the DLR334 and DLR3110’s per­formance power. The DLR334 panel mount or table top
and the 19 inch rack-mounted DLR3110 lend themselves
to custom use in calibrating a variety of devices, includ­ing pressure gauges, pressure transducers, pressure
switches, relief valves, and burst discs.

The DLR334 and DLR3110...providing the ultimate in
accuracy and affordability for high-pressure applications.

Standard Features

• Three models available:
DLR334 table top model
DLR334 table top/panel mount model
DLR3110 19 inch rack-mounted version

• 115 or 230 VAC operation

• Ranges from vacuum to 10,000 psi

• 20 selectable engineering units

• Freeze mode for pressure switch testing

• 0.05% of reading, 0.1% of reading, or the economical 0.25% of

reading model

• Selectable resolution

• NIST traceable

• Digital outputs: RS-232, RS-422, and RS-485

• Min/Max pressure readings

• Accuracy is percent of reading from 20% of full scale

Options/Accessories

23113** ....... TMU295 ticket printer

81076** ....... TM-U220D tape printer

15547 ......... 25-pin printer interface cable

19297 ......... DLR334 panel mount adapter kit (included in panel

mount models, not available for black extruded model)

63255 ......... Additional operating and maintenance

manual for DLR334

DLR3110 only

58478 ......... Pressure trap (5000 psi and above)

Literature sheet PN 58596

58483 ......... Pressure trap (250-2500 psi)

Literature sheet PN 58609

58487 ......... Pressure trap (3-100 psi)

Literature sheet PN 58621

74843 ......... Additional operating and maintenance

manual for DLR3110

55279 ......... Additional test port (output) 5 ft. long hose with

quick-disconnect plug (SST) on one end and 1/4 in.
37º female AN swivel tube coupling on the other end
(DLR3110 250-2500 psi operation)

55280 ......... Additional test port (output) 4-1/2 ft. long hose with

quick-disconnect (SST) plug on one end and 1/4 in.
37º female AN swivel pressure fitting on opposite end.
(DLR3110 5000 psi and above operation)

55281 ......... Additional test port (output) 5 ft. long hose with

quick-disconnect plug (brass) on one end and 1/4 in.
37º female AN swivel tube coupling on the other end.

Additional options available*

Standard unit plus two relays and setpoints
Standard unit plus 0-10 VDC and 4-20 mA outputs
Standard unit plus parallel BCD output

* Please refer to price pages for part numbers

and part numbering guide.
** Consult factory for printer specifications.
*** Pressure limit control and monitor are not required for 5000 psi models and above.

(DLR3110 3-100 psi operation)

(Specifications on back)

CP-5

DLR334/DLR3110

Specications

OVERALL ACCURACY:

0.05% of reading, 0.1% of reading, 0.25% of reading all from
20% of full scale and above. Below 20% of full scale units
remain 0.05%, 0.1%, or 0.25% of 20% of full scale range.
Includes all effects of linearity, hysteresis, repeatability, and
ambient temperature. No temperature effect from
40°F to 140°F. NIST traceable.

TEMPERATURE RANGE:

Operating: 40°F to 140°F (4°C to 60°C)

Storage: 0°F to 185°F (-17°C to 85°C)

Warm up: 3 minutes to rated accuracy, 15 minutes to
complete stability

CALIBRATION:

Full NIST traceability. Calibration points can be adjustable for
operator convenience. Calibration via front panel and/or
digital interface.

RESOLUTION:

Adjustable, 50,000 display counts (maximum) of range

DISPLAY SIzE:

Two-line, six-digit, 0.6 in. high numeric display, eight alpha
characters per line, three annunciator light bars, bright red Light
Emitting Diode (LED)

TABLE TOP

PRESSURE HOSE (DLR3110 ONLY):

Quantity supplied: One output

Length: 4 ft. nominal

DISPLAY UPDATE:

Adjustable, 100 ms maximum

MEDIA COMPATIBILITY:

Any media compatible with 17-4PH or 15-5PH stainless steel

OVERPRESSURE:

200% of range (minimum)

POWER REqUIREMENTS:

115 or 230 VAC

CASE MATERIAL:

Single piece extruded aluminum or panel mount sheet metal

WEIGHT:

DLR334 Table top: 7.5 lb (3.4 kg)

DLR334 Panel mount or table top: 8.7 lb (3.9 kg)

DLR3110: 19 lb (8.6 kg)

PANEL MOUNT
OR TABLE TOP

DIMENSIONS

DLR334 - Table Top Model
A = 8.46 in. (214 mm) C = 10.5 in. (266.70 mm)
B = 2.94 in. (74.67 mm)

DLR334 - Panel Mount or Table Top Model

A = 7.56 in. (192.02 mm) D = 10.35 in. (262.89 mm)

B = 9.14 in. (232.15 mm) F = 7.38 in. ±0.03 (187.45 mm)
C = 3.78 in. (96.01 mm) G = 3.6 in. ±0.03 (91.44 mm)

DLR3110 - 19 inch Rack-mount (not shown)
19 in. W x 7 in. H x 10 in. deep (482.6 mm x 177.8 mm x 254 mm)

Excluding front handles

Rack-mount dimensions are for reference only. Consult factory for

cutout dimensions.

Specifications subject to change without notice

© Condec 2012 Catalog PN 64749 1/12