Condec 58483 Data sheet
May be used with:
UPC5000, 500 to 2000 PSI
UPC5010, 500 to 2000 PSI
UPS3110, 500 to 2000 PSI
Source 3000
FLOW DIRECTION
psi Max. Pressure Trap
Part #58483
•Pressure trap housing and fittings are all stainless steel construction.
• Maximum working pressure is 3000 psi, and maximum working temperature is 200° F.
• Unit connects between calibrator test port and test hose. Always vent system pressure
prior to connecting or disconnecting.
• External nut assembly with Buna-N O-ring (part #55573) and teflon back-up washer (part
#57027) makes for a positive seal.
•Virtually no maintenance required. Approximately every two months apply a light coating
of fluorinated krytox grease (part #55593) to both sides of O-ring and back-up washer, as
well as, to the quick-disconnect fitting (mates with test hose) inner seal.
Note: The easiest method is to apply krytox grease to the outside surface between sealing lip and end of the
mating test hose fitting (do not get grease in nitrogen flow opening). Vent unit line pressure to atmosphere.
Plug test hose fitting into pressure trap quick-connect fitting and twist fitting back and forth to transfer krytox
grease.
• For ease of cleaning, the only tool required is a 1-1/4" wrench. Always disconnect from
calibrator and test hose prior to cleaning.
3000
Toll Free: 888-295-8475 • International: 715-234-9171 • FAX: 715-234-6967
WEB SITE: www.4condec.com
© CONDEC 2002 • All rights reserved • Printed in the United States of America • Specifications subject to change without notice
February 2002
58609
Loading...