Comnet CNGE4US Specsheet

10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch

CNGE4US

INCLUDED

The ComNet™ CNGE4US Ethernet 4 port unmanaged switches are designed to
transmit and receive 10/100/1000 Mbps data using small form factor pluggable
modules. Both are environmentally hardened to operate in demanding environments.
LED indicators are provided for confirming equipment operating status. Plug-and-play
design ensures ease of installation requiring no optical adjustments. Packaged in the
exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or
may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

HARDENED

FLEXIBILIT Y

4ALL GIGABIT

FEATURES

› 10/100/1000 Mbps Ethernet

› Environmentally Hardened for use in unconditioned

installations

› All ports support 1000 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low­line voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.

› No In-field optical adjustments required

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and
other voltage transient events.

› Power and Port status indicating LEDs

› IEEE 802.3 compliant

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› Lifetime Warranty

APPLICATIONS

› 10/100/1000 Mbps Gigabit Ethernet

› High Speed Computer Links

* SFP = Small Form-Factor Pluggable Module

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CNGE4US

SPECIFICATIONS

10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch

Data

Data Interface Ethernet
Data Rate 10/100/1000 Mbps,

IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port

Operating Mode SFP Selec table

Fibers¹ Requires selection of sold-separately SFP

modules. See ComNet data sheet “SFP Small
Form-Factor Pluggable Modules” for number and
description of SFP modules.

Connectors

Optical Requires selection of sold-separately SFP

modules. See ComNet data sheet for number

and description of SFP modules.
Power Terminal Block
Optical LC or SC (depending on SFP module used)

LED Indicators - Optical Link/Data Activity

- Electrical Link/Data Activity

- Power - PoE

Power

Operating Voltage 9 to 24 VDC
Current Draw 17 W max

Electrical & Mechanical

Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Number of Rack Slots 1
Shipping Weight <2 lbs./0.9 kg

Environmental

MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode

fiber needs to meet or exceed fiber standard ITU-T G.652

ORDERING INFORMATION

Part Number Description

CNGE4US 4 Port 1000 Mbps Ethernet Unmanaged Switch

Options DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)

Small Form-Factor Pluggable Modules (See SFP data sheet)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

© 2014 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

|

F: 203.796.5303

|

T: [phone]

|

|

F: [phone]

TECH SUPPORT: 1.888.678.9427

|

[e-mail]

|

[e-mail]

08 Apr 2014