Comnet CNGE1IPS75AC, CNGE1IPS95AC Specsheet

Industrial 75W and 95W Power over Ethernet (POE++)

Midspan Injector for 10/100/1000TX

CNGE1IPSXXAC Series

95 W PoE++ 60 W PoE++ 30 W PoE+1000 MBPS-40º TO +75ºDIN RAIL

The ComNet CNGE1IPSXXAC series consists of industrial Power over Ethernet midspan injection modules that inject 50-57 VDC at to any network cable. Operating power and 10/100/1000TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. The CNGE1IPS95 is fully compliant with the requirements of IEEE 802.3at for Power Sourcing Equipment (PSE), and features auto detection of powered devices (PDs). Transmission distances of up to 328 feet (100 meters) are supported, and this injector supplies operating power for PDs drawing a maximum of 75 and/or 95 watts (model dependent). Ideally suited to fiber optic, wireless, or other networks where it may be difficult to furnish operating power to the PDs, the CNGE1IPSXXAC series offers a true plug-and-play product requiring no user configuration or other set-up.

FEATURES

› Easily combines operating power and 10/100/1000TX

Ethernet data to one network cable

› Fully Compliant with IEEE Standard 802.3at for Power

Sourcing Equipment

› Provides up to 75 W or 95 W of PoE power for ultra high

power PD devices

› Designed for deployment in industrial -40º to +75º C

operating environments.

› Rugged, compact package with built-in AC-to-DC power

supply

› Ease of installation & true plug-and-play operation: no user

configuration or settings required

› Unit is designed to be wall mounted

› Provides 6 KV (10/700µs) surge protection

APPLICATIONS

› Remote operating power for IP CCTV cameras for security

and surveillance systems

› Remote operating power for Voice over IP (VoIP) telephony

networks

› Remote operating power for wireless LAN access points

› Industrial Security, Transportation/ITS, and Industrial Control/

Factory Automation IP Networks

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

CNGE1IPSXXAC Series

SPECIFICATIONS

Industrial 75W and 95W Power over Ethernet (POE++)

Midspan Injector for 10/100/1000TX

Ethernet Standards

IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3at PoE+

Connectors

RJ45 Data In/Out Data/signal pairs pin (1,2) (3,6) (4,5) (7,8) RJ45 Power out Power over pairs: 3,6(V+), 4,5(V+), 1,2(V-), 7,8(V-)

Power

Power Consumption 1 W Max (without PoE Load) Input Power Supply 100-240 VAC Input Power Output 50-57 VDC @ 75 W Max

50-57 VDC @ 95 W Max

AC Surge Protection

Line-Earth 1.2/50µs (8/20µs) 6 KV Line-Line 1.2/50µs (8/20µs) 4 KV

PoE Surge Protection

Protected line 1,2,3,4,5,6,7,8 Common mode (10/700µs) 6 KV Differential mode (10/700µs) 1.5 KV

Electrical & Mechanical

Indicating LEDs Power, PoE Load Enclosure IP 20 Black powder-coat aluminum Installation Wall mount Size 75W: 8.1 × 5.1 × 1.6 in (20..4 × 13.0 × 4.1 cm)

95W: 8.4 × 5.3 × 1.6 in (21.4 × 13.4 × 4.1 cm)

Shipping Weight 75W: <2 lb / 0.74 kg

95W: <2 lb / 0.92 kg

Environmental

MTBF >500,000 hrs (MIL-HDBK-217F) at 25°C Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +80˚ C Relative Humidity 10% to 90% (non-condensing)

Approvals & EMC Compliance

EMI FCC Part 15 Subpart B Class A,

CE EN 55022 Class A

Safety cUL/UL

Performance

ORDERING INFORMATION

Part Number Description

CNGE1IPS75AC Industrial 75 W Gigabit Power over Ethernet midspan injector, compatible with IEEE802.3at, with power cord.

CNGE1IPS95AC Industrial 95 W Gigabit Power over Ethernet midspan injector, compatible with IEEE802.3at, with power cord.

TYPICAL APPLICATION

Legend

E+

PoE++

Powered Device

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

CNGE1IPSXXAC

Power

Injector

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

100–240 VAC @ 2A

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

TECH SUPPORT: 1.888.678.9427

F: +44 (0)113 253 7462

INFO-EUROPE@COMNET.NET

Ethernet

Ethernet & PoE++

INFO@COMNET.NET

24 Sep 2019