Comnet CNGE12FX4TX8MS, CNGE12FX4TX8MS-TS2, CNGE12FX4TX8MS-TS2K, CNGE12FX4TX8MSPOE, CNGE12FX4TX8MSPOE-TS2 Specsheet

...

Download

Page 1

Traffic Detector Rack Industrially Hardened Managed Switch with

(8) 10/100/1000Base-TX & (4) 100/1000Base-FX Ports & Optional PoE+

CNGE12FX4TX8MS[POE]/TS

-40˚ TO 75˚ C

The ComNet CNGE12FX4TX8MS[POE]/TS is a twelve port, managed Ethernet switch. The switch is mechanically designed to fit into a NEMA TS2 traffic detector rack and derives power and ground from the backplane. The small form factor allows the user to take advantage of existing rack space already dedicated within an already space limited traffic cabinet making installation clean and easy. The four SFP ports are 100/1000Mbps capable, allowing single-mode or multimode optical fiber transmission with the use of optional SFPs. The density of the SFP ports allows for an optical dropand-repeat, ring or star (north-south-east-west) topology to address the majority of traffic applications. The remaining eight RJ-45 ports allow for high-throughput 10/100/1000TX Gigabit connectivity on the local copper Ethernet access ports.

The CNGE12FX4TX8MSPOE/TS features IEEE 802.3at (30W) PoE on all eight RJ-45 Ethernet ports for PoE-compliant devices such as wireless radios or IP cameras. The ideal solution when footprint within the traffic cabinet is limited.

The Device-Binding function can prevent unauthorized network access, increasing security. The unit also provides advanced DOS/DDOS auto prevention. If IP flow becomes too large, too quickly, the switch will lock the source IP address for a set period preventing unauthorized access.

ALL GIGABIT 8 + 4IEEE 802.3atFLEXIBILIT Y

FEATURES

› Four (4) SFP ports support 100/1000 Mbps SFP modules

› Eight (8) electrical ports support 10/100/1000 Mbps

Ethernet IEEE802.3 protocol, with IEEE 802.3at PoE (CNGE12FX4TX8MSPOE/TS only)

› SNMPv3, HTTPS, SSH Security features, TACACS+,

IEEE1588v2 Timing, 802.1x, & DDMI

› EMC Performance: Industrial Level 4

› Supports Jumbo Frame

› Redundant technology: Supports RSTP/MSTP/C-Ring &

G.8032 ERPS for ring and mesh topologies

› Supports IGMP Snooping, GMRP, and static multicast

› Supports VLAN, Voice VLAN, and PVLAN

› Supports QoS

› Supports port trunking, port speed limit, and broadcast storm

control

› Supports Network Management and Monitoring

› Supports SSH, SSL, and ACL for Network Security

› Supports FTP Device Upgrade Management

› Supports Port Mirroring for Device Maintenance

› Supports IP/MAC conflicts, Power, Port, and Ring Alarm

› Multicast VLAN Registration, IEEE 802.1Q with GVRP

› Windows utility, eConsole, supports centralized management,

and is web-based configurable, or by Telnet and console (CLI) ports

› Supports DOS/DDOS auto prevention

APPLICATIONS

› Municipal Signal and ITS applications

* Small Form-Factor Pluggable Module. Sold separately.

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

Page 2

CNGE12FX4TX8MS[POE]/TS

SPECIFICATIONS

Traffic Detector Rack Industrially Hardened Managed Switch with

(8) 10/100/1000Base-TX & (4) 100/1000Base-FX Ports & Optional PoE+

Connectors

100/1000BASE-X 4 × SFP Ports¹ 10/100/1000BASE-T(X) 8 × RJ-45 Ports, with Auto MDI/MDIX Serial Console RS-232 @ 115,200 bps 8,N,1 w/ console cable (incl.) PoE Power 2-pin plug in terminal block

(CNGE12FX4TX8MSPOE/TS Only)

Power From NEMA TS/2 Traffic Detector Rack

Ethernet Standards Supported

IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.3at for Power over Ethernet IEEE 802.1p for COS (Class of Service) Real-Time Traffic IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) RFC1887 - IPv6 Architecture RFC2460 - IPv6 Protocol Specification RFC2464 - IPv6 Transmission

Switch Properties

Switching Latency <5 μs Switching Bandwidth 24 Gbps, non-blocking wire speed on all ports

99.999% error free data integrity Number of VLANs 4095 VLAN ID 1-4095 Max. VLANs Available 256 IGMP Multicast Groups 128 for each VLAN Port Rate Limiting User Defined MAC Table 8000 MAC addresses available Packet Buffer 16 Mb Priority Queues 8 Processing Store-and-Forward Security Queues 16 per VLAN Jumbo Frame Up to 9.6K bytes

Software Features

Dos/DDoS Auto Prevent on: Port & Flow Security IEEE 1588v2 Clock Synchronization IEEE 802.1D Bridge, Auto MAC Address Learning / Aging and MAC address (Static) RSTP / MSTP (IEEE 802.1w/s) Per Port Power Saving Feature Redundant Ring with a recovery time of <20 ms over 300 switches TOS/DiffServ Supported QoS IEEE 802.1p for real time traffic VLAN IEEE 802.1Q with VLAN Tagging Voice VLAN IGMP v2 / v3 Snooping IP-Based Bandwidth Management Application Based QoS Management Port Configuration, Status Statistics, Monitoring & Security DHCP Server / Client DHCP Relay ModBUS TCP SMTP Client Broadcast Storm Control

Security Features

Device Binding Security Features with Silicon Enhancements Enable/Disable Ports, MAC Based Port Security Port Based Network Access Control (802.1x) Single 802.1x and Multiple 802.1x MAC Based Authentication IP Address Based Authentication QoS Assignment MAC Address Limit TACACS+ Keep-Alive Check VLAN (802.1Q) Segregate and Secure Network Traffic Radius Centralized Password Management SNMPv3 Encrypted Authentication and Access Security WEB and CLI Authentication and Authorization IP Source Guard HTTPS / SSH Enhanced Network Security

Network Redundancy

C-Ring Legacy Ring G.8032 ERPS MSTP (RSTP/STP)

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

Page 3

AGENCY COMPLIANCE

CNGE12FX4TX8MS[POE]/TS

SPECIFICATIONS

Traffic Detector Rack Industrially Hardened Managed Switch with

(8) 10/100/1000Base-TX & (4) 100/1000Base-FX Ports & Optional PoE+

Power

Input Power 12 or 24 V rear power input (from rack),

48 V front power input

Operating Voltage Range Non-PoE: 9 to 36 VDC

PoE: "9 to 36VDC rear; 48 to 57 VDC front

Power Consumption Non-PoE: 18 W, Max

PoE: 260 W, Max (240 W PoE budget)

Current Protection Overload Current Protected

Electrical & Mechanical

LED Status Indicators Power Ring R.M. Link/Activity/Speed PoE Size 2.23 × 4.51 × 8.08 in (5.67 × 11.45 × 20.53 cm) Enclosure IP-30 Aluminum Installation NEMA TS/2 Traffic Detector Rack Construction All parts and conductive surfaces are made of

Noncorrosive materials.

Shipping Weight 3.19 lb / 1.45 kg

Environmental

MTBF >100,000 hours calculated using Bellcore//

Telcordia SR-332 standard Operating Temperature -40˚ C to +75˚ C Storage Temperature -40˚ C to +85˚ C Relative Humidity 5% to 97% (non-condensing)

Regulatory Approvals

EMI FCC CFR47 Part 15 CE CISPR EN55022 Class A ESD EN61000-4-2 RS EN61000-4-3 EFT EN61000-4-4 Electrical Surge EN61000-4-5 CS EN61000-4-6, EN61000-4-8 Damped Oscillatory Wave IEC61000-4-12/18 Damped Oscillatory IEC61000-4-10 Common Mode Conduct IEC61000-4-16 Mechanical Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 NEMA TS1/TS2 Certified Device Industrial Standards IEC61000-6-2 Multi-Cast Certified for High Definition Video

ORDERING INFORMATION

Part Number Description

CNGE12FX4TX8MS/TS 12-port Hardened Managed Gigabit Layer 2 Traffic Switch with 8 × 10/100/1000Base -TX Ports & 4 × 100/1000Base-FX Port s

CNGE12FX4TX8MSPOE/TS 12-port Hardened Managed Gigabit Layer 2 Traf fic Switch with 8 × 10/100/1000Base-TX PoE+ Ports & 4 × 100/1000Base-FX Ports

Included Accessories Options

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652. This

product requires a fiber installation with a minimum 30 dB connector return loss.

The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

Console cable, Produc t Support CD User Selection of SFPs (See SFP Modules Data sheet for compatibilit y and ordering information)

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

TECH SUPPORT: 1.888.678.9427

F: +44 (0)113 253 7462

INFO-EUROPE@COMNET.NET

INFO@COMNET.NET