Comelit 1443, 1445, 1446, 1447, 1450 User Manual

...

the complete Internet Protocol system:

simple and versatile

Installer manual

www.comelitgroup.com

Fonts are (c) Bitstream (see below). DejaVu changes are in public domain. Glyphs imported from Arev fonts are (c) Tavmjong Bah (see below) Bitstream Vera Fonts Copyright

Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation ﬁ les ("Font Software"), to reproduce and distribute the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions:

The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces.

The Font Software may be modiﬁ ed, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modiﬁ ed and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words “Bitstream” or the word “Vera”.

This License becomes null and void to the extent applicable to Fonts or Font Software that has been modiﬁ ed and is distributed under the "Bitstream Vera" names.

The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself.

THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.

Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact: fonts at gnome dot org.

Arev Fonts Copyright

Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation ﬁ les (the "Font Software"), to reproduce and distribute the modiﬁ cations to the Bitstream Vera Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions: is furnished to do so, subject to the following conditions:

The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces. The Font Software may be modiﬁ ed, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modiﬁ ed and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Tavmjong Bah" or the word "Arev".

This License becomes null and void to the extent applicable to Fonts or Font Software that has been modiﬁ ed and is distributed under the "Tavmjong Bah Arev" names.

The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself.

THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.

Except as contained in this notice, the name of Tavmjong Bah shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from Tavmjong Bah. For further information, contact: tavmjong @ free. fr.

Chapter 1: Introduction to the VIP system ..............................................................................................................................5

What is the VIP system? ...............................................................................................................................................................................5

Main features .................................................................................................................................................................................................5

General structure of a VIP system ...............................................................................................................................................................5

Chapter 2: Description of products and accessories ............................................................................................................ 6

Software .........................................................................................................................................................................................................6

VIP Manager art. 1449 VIP system conﬁ guration software ......................................................................................................................6

Power supply units and system connection accessories .........................................................................................................................6

VIP system riser power supply unit 120 W art. 1441A ..............................................................................................................................6

VIP system riser power supply unit 100 W art. 1441 ................................................................................................................................6

Power supply unit art. 1395 for external units ...........................................................................................................................................7

VIP system POE power supply unit for monitor art. 1451 .........................................................................................................................7

Switch art. 1440 ........................................................................................................................................................................................7

VIP system riser signal repeater module Art. 1447 ...................................................................................................................................8

VIP system device barcode reader art. 1450 ............................................................................................................................................8

Internal units ..................................................................................................................................................................................................9

Planux backplate art. 6231 and Planux monitor art. 6202 ........................................................................................................................9

7Stelle monitor art. 6501 ...........................................................................................................................................................................10

Smart monitor art. 6304 ............................................................................................................................................................................10

Easycom door-entry phone art. 6203 .......................................................................................................................................................11

VIP switchboard art. 1952 .........................................................................................................................................................................11

Powercom series external units ..................................................................................................................................................................12

Powercom module art. 3331/0 - 1 - 2 for audio/video units ......................................................................................................................12

Powercom series colour audio/video unit for VIP system art. 4662C .......................................................................................................12

Powercom call button module art. 3337/3 - 4 - 6 ......................................................................................................................................12

Powercom series backlit indication module art. 3327 ...............................................................................................................................13

Powercom series digital call module for VIP system art. 3370 .................................................................................................................13

IKall series external units .............................................................................................................................................................................14

IKall module art. 33400 - 33401 - 33402 for audio units ...........................................................................................................................14

IKall module art. 33410 - 33411 - 33412 for audio/video units .................................................................................................................14

IKall series audio unit for VIP system art. 1682 ........................................................................................................................................14

IKall series colour audio/video unit for VIP system art. 4682C .................................................................................................................15

IKall call button module art. 33433 - 33434 - 33436 .................................................................................................................................15

IKall series digital call module for VIP system art. 3360A .........................................................................................................................15

Vandalcom series external units .................................................................................................................................................................16

Vandalcom series digital call module for VIP system art. 3270, for Powercom external unit art. 4662C ..................................................16

Vandalcom series digital call module for VIP system art. 3070B, for Powercom external units art. 4662C and IKall external units art. 4682C .....16

Vandalcom series digital call module for VIP system art. 3272, for Powercom external unit art. 4662C ..................................................17

Vandalcom series digital call module for VIP system art. 3072B, for Powercom external units art. 4662C and IKall external units art. 4682C .....17

Module art. 3268I/0 -1 - 2 designed for a/v units, iKall series ...................................................................................................................18

Module art. 3269/0 - 1 - 2 designed for a/v units, Powercom series .........................................................................................................18

Module art. 3262I/0 -1 - 2 designed for audio units, IKall series ...............................................................................................................18

Vandalcom series 4-button module art. 3064/C for VIP system ...............................................................................................................18

VIP system accessories ...............................................................................................................................................................................19

Remote camera module art. 1445 ............................................................................................................................................................19

VIP system actuator relay module Art. 1443 .............................................................................................................................................20

PAL / NTSC video output module art. 1446 ..............................................................................................................................................21

Expansion module art. SK9071 ................................................................................................................................................................21

Chapter 3: System preparation and speciﬁ cations ................................................................................................................22

Connection distances ...................................................................................................................................................................................22

Connection distances from power supply unit art. 1395 to external unit art. 3331 ...................................................................................22

Connection distances between external unit and Switch art. 1440 ..........................................................................................................22

Connection distances between 2 Switches art. 1440 ...............................................................................................................................22

Connection distances from Switch art. 1440 / Repeater art. 1447 to door-entry phones / door entry monitors .......................................23

Connection distances from Switch art. 1440 / Repeater art. 1447 to switchboard art. 1952 ....................................................................23

Expanding a system using repeater art. 1447 ..........................................................................................................................................23

Guide to ﬁ tting a UTP / STP RJ45 Direct network cable ............................................................................................................................24

Chapter 4: Mounting external units and internal units .......................................................................................................... 27

Mounting Powercom series external units .................................................................................................................................................28

Mounting external unit art. 4662C and additional buttons art. 3337/3 - 4 - 6 ............................................................................................28

Mounting actuator module art. 3327 .........................................................................................................................................................29

Mounting digital directory art. 3370 ...........................................................................................................................................................29

Mounting IKall series external units ............................................................................................................................................................30

Mounting external unit art. 4682C and additional buttons art. 33433 - 33434 - 33436 .............................................................................30

Mounting digital directory art. 3360A ........................................................................................................................................................31

Mounting Vandalcom series external units ................................................................................................................................................32

Connecting audio-video unit art. 4662C for use with buttons on Vandalcom external unit art. 3269/1 - 2 ...............................................32

Connecting audio unit 1682 or audio-video unit art. 4682C for use with buttons on Vandalcom external unit art. 3262I/1 - 2 and art. 3268I/1 - 2 .....33

Mounting audio-video unit art. 4662C or 4682C for use with additional buttons art. 3064/C....................................................................34

Mounting digital directories art. 3270 - 3272 with Powercom external unit art. 4662C .............................................................................35

Mounting digital directories art. 3070B - 3072B with IKall external unit art. 4682C ..................................................................................36

Mounting internal units ................................................................................................................................................................................37

Mounting Planux monitor art. 6202 with ﬂ ush-mounted box art. 6117 ......................................................................................................37

Mounting Planux monitor art. 6202 with wall bracket art. 6120 ................................................................................................................38

Mounting Sette Stelle monitor art. 6501 ...................................................................................................................................................39

Mounting 7Stelle monitor art. 6501 with ﬂ ush-mounted box art. 6517 ......................................................................................................40

Mounting Easycom monitor art. 6203 .......................................................................................................................................................41

Mounting Smart monitor art. 6304 with wall bracket art. 6320 ..................................................................................................................42

Mounting Smart monitor art. 6304 with ﬂ ush-mounted box art. 6117 .......................................................................................................43

Chapter 5: Installation programming ......................................................................................................................................44

Mac Address ..................................................................................................................................................................................................44

VIP code .........................................................................................................................................................................................................44

Reset procedure for external unit art. 4662C and 4682C ..........................................................................................................................44

Manually programming buttons on external unit art. 4662C ....................................................................................................................46

Manually programming buttons on external unit art. 4682C ....................................................................................................................47

Assigning module index to additional button products art. 3337/3 - 4 - 6 ..............................................................................................48

Assigning module index to additional button products art. 33433 - 33434 - 33436 ................................................................................49

Programming internal units .........................................................................................................................................................................50

Planux monitor art. 6202 and Smart monitor art. 6304 (only with optional buttons art. 6332) ..................................................................50

Accessing the installer menu ..............................................................................................................................................................50

Setting the menu language ................................................................................................................................................................50

Programming the VIP code for main Planux monitors .......................................................................................................................51

Programming the VIP code for secondary Planux monitors ...............................................................................................................51

Conﬁ guring 1 - 2 or Self-ignition buttons ............................................................................................................................................52

Conﬁ guring the key button .................................................................................................................................................................53

Conﬁ guring the Privacy / Doctor button ..............................................................................................................................................54

Conﬁ guring the intercom directory .....................................................................................................................................................54

Conﬁ guring the self-ignition directory .................................................................................................................................................55

Conﬁ guring the Actuator Directory .....................................................................................................................................................56

Setting the Door Open function ..........................................................................................................................................................57

Setting the Alarm function ..................................................................................................................................................................58

Setting the ringtone repetition ............................................................................................................................................................58

Setting call times ................................................................................................................................................................................59

Setting automatic answer ...................................................................................................................................................................59

Video memory records always ...........................................................................................................................................................60

Activate output ....................................................................................................................................................................................60

Call divert ...........................................................................................................................................................................................61

Reset conﬁ guration ............................................................................................................................................................................61

7Stelle monitor art. 6501 ...........................................................................................................................................................................62

Accessing the installer menu ..............................................................................................................................................................62

Conﬁ guring buttons ............................................................................................................................................................................62

Conﬁ guring functions ..........................................................................................................................................................................62

Intercom function .........................................................................................................................................................................62

Self-ignition function .....................................................................................................................................................................62

Alarm function ..............................................................................................................................................................................63

Lock-release function ...................................................................................................................................................................63

Actuator function ..........................................................................................................................................................................63

Activate output function ................................................................................................................................................................63

Conﬁ guring the monitor ......................................................................................................................................................................64

VIP address .................................................................................................................................................................................64

About ............................................................................................................................................................................................64

Reset conﬁ guration ......................................................................................................................................................................64

Special Settings ..................................................................................................................................................................................64

Actuator Directory ........................................................................................................................................................................64

Camera Directory .........................................................................................................................................................................65

Intercom Directory ........................................................................................................................................................................65

Set ringtone repetition ..................................................................................................................................................................65

Set call times ................................................................................................................................................................................65

Call divert .....................................................................................................................................................................................66

Alarms ..........................................................................................................................................................................................66

Door open ....................................................................................................................................................................................66

Activate output .............................................................................................................................................................................66

Automatic answer ........................................................................................................................................................................66

Video memory records always .....................................................................................................................................................66

Porter switchboard art. 1952 .....................................................................................................................................................................67

Accessing the installer menu ..............................................................................................................................................................67

Setting the VIP Address .....................................................................................................................................................................67

Setting the associated camera ...........................................................................................................................................................67

Setting the associated video output ...................................................................................................................................................67

Programming the self-ignition key

Programming the lock-release key ..............................................................................................................................................68

Activating / deactivating the OFF key .......................................................................................................................................................68

Setting the call times .................................................................................................................................................................................69

Setting call divert ......................................................................................................................................................................................69

Setting activations on call .........................................................................................................................................................................69

...............................................................................................................................................68

Chapter 6: Wiring diagrams .....................................................................................................................................................70

Connecting Powercom call button module art. 3337/3-4-6 .......................................................................................................................70

Connecting Powercom series digital call module art. 3370 ......................................................................................................................71

Connecting backlit module with actuator relay art. 3327 ..........................................................................................................................72

Connecting IKall call button module art. 3343/3-4-6 ..................................................................................................................................73

Connecting IKall series audio unit for VIP system art. 1682 .....................................................................................................................74

Connecting IKall series digital call module art. 3360A ..............................................................................................................................75

Connecting Vandalcom series digital call modules art. 3070B and art. 3072B with IKall series external units Art. 4682C or 1682 .. 76

Connecting Vandalcom series digital call modules art. 3270 and art. 3272 with Powercom series external unit Art. 4662C ............77

Connecting Art. 3064/C with audio-video unit 4682C or audio unit Art. 1682 ........................................................................................78

Connecting remote camera module art. 1445 ............................................................................................................................................79

Connecting PAL / NTSC module art. 1446 ..................................................................................................................................................80

Connecting repeater module art. 1447 ........................................................................................................................................................81

Connecting IO module art. 1443 and expansion device art. SK9071 .......................................................................................................82

Request to exit (RTE) button input variant .................................................................................................................................................83

Planux VIP output and input variant ...........................................................................................................................................................83

7Stelle output and input variant ..................................................................................................................................................................84

Smart output and input variant ....................................................................................................................................................................84

Easycom output and input variant ..............................................................................................................................................................85

Connection of Vandalcom nameplate lighting lamp with audio unit Art. 1682 or audio-video unit Art. 4682C (Ikall) .........................85

Connecting Planux VIP additional ringtone variant ...................................................................................................................................86

Connecting 7Stelle additional ringtone variant ..........................................................................................................................................86

Connecting Smart additional ringtone variant ...........................................................................................................................................86

Connecting Easycom additional ringtone variant .....................................................................................................................................86

Chapter 1: Introduction to the VIP system

What is the VIP system?

The VIP system is the new IP video entry phone system combining powerful performance with ease of installation. The VIP network, based on a connection via Ethernet cable, connects an inﬁ nite number of users in simultaneous conversations and with no distance restrictions. It integrates a video entry phone system, burglar alarm, video surveillance, home automation and access control functions into a single system. The VIP System can be used to create either a dedicated, proprietary network or integrated into an existing LAN, creating a video entry phone system that runs in parallel with other existing systems.

Main features

The VIP System delivers optimal performance across an intelligible infrastructure, untangling the communication, control, security, automation and monitoring apparatus needed for access and building control.

• Multiple simultaneous audio-video conversations

• An unlimited number of users and devices can be plugged into the network

• No limits on the number of connected entrance panels, internal units, switchboards and cameras

• All network devices are connected to the network via RJ45 plug

• Simultaneous communication capabilities between all network users

• Memovideo function installed as standard on all monitors

• Interface management for lifts and additional ﬂ oors

• Integrated access control and video surveillance options

• Alarms or panic messages can be sent to porter switchboards

• Audio and text messages between users and switchboards

• "Follow me" and data transfer to external applications (PC or telephone)

• Remote home automation management

General structure of a VIP system

Below is a synoptic diagram providing a general illustration as to how a VIP system can be laid out.

The optimal freedom offered by the VIP system means that networks can be created using cascade or branch connections, with no restrictions.

Chapter 2: Description of products and accessories

Software

VIP Manager art. 1449 VIP system conﬁ guration software

CD-ROM software for PC installation, for the programming and conﬁ guration of all wired devices in the system. Also allows button programming and management of names in external unit directories. Includes a special cable for connection between switch 1440 and PC.

When connecting a PC to a VIP system, the special cable supplied with software art. 1449 must be used

Power supply units and system connection accessories

VIP system riser power supply unit 120 W art. 1441A

Power supply unit art. 1441A, to power all accessories connected to the riser (not including external units).

Terminal blocks for connection

-V

Technical characteristics

Input voltage 100 - 240 V AC (3 A)

Output voltage 48 V DC (2.5 A)

Power 120 W

Frequency 50/60 Hz

Temperature thresholds -30°C / +55°C

Dimensions 4 DIN modules / H: 12.5 cm W: 6.5 cm D: 10.7 cm

+V +V -V -V: Riser power supply terminals.

L N: Alternating 230 Vac network terminals.

: Earth. connection terminal.

VIP system riser power supply unit 100 W art. 1441

Power supply unit art. 1441, to power all accessories connected to the riser (not including external units).

Technical characteristics

Input voltage 100 - 240 V AC (3 A)

Output voltage 56 V DC (1.8 A)

Power 100 W

Frequency 50/60 Hz

Temperature thresholds -30 +55

Dimensions 6 DIN modules / H: 9.3 cm W: 9.9 cm D: 5.3 cm

Terminal blocks for connection

+V -V: Riser power supply terminals. L N: Alternating 230 Vac network terminals.

Power supply unit art. 1395 for external units

Technical characteristics

Input voltage 207 - 257 V AC (3 A)

Output voltage 13.1 - 15.9 V DC (1.8 A)

Power 60 W

Frequency 50 Hz

Temperature thresholds -20 / +40°C

Dimensions 4 DIN modules / H: 9 cm W: 7.15 cm D: 6.2 cm

Terminal blocks for connection

230 V ~: Alternating 230 Vac network terminals. 0 12~: Power supply output terminals.

VIP system POE power supply unit for monitor art. 1451

The power supply unit converts an Ethernet connection into a POE-type connection supplying an internal unit. The power supply unit is necessary if VIP devices (door entry monitors / door-entry phones) are installed on existing Ethernet networks with non-POE (Power Over Ethernet) connections.

Technical characteristics

Input voltage 100 - 240 V AC (0.95 A)

Output voltage 56 V DC (0.35 A)

Power 33.6 W

Frequency 50 - 60 Hz

Temperature thresholds -20 / +50°C

Dimensions H: 3.7 cm W: 6.5 cm D: 16.4 cm

Indicator LED

ON: Power supply enabled indication FAULT: Error indication CONNECT: Ethernet cable connected to OUT port indication

Ethernet ports

OUT: for the connection of internal units IN: for the connection of a non-POE Ethernet network

Switch art. 1440

The Ethernet Switch module art. 1440 performs two main functions:

• Directing data VIP system data packages.

• Provide a power supply for the extensions connected to it and to any switch/repeaters connected in cascade.

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 6.2 cm W: 7.2 cm D: 9 cm

Ethernet port status indicator LED

Lit steadily: port in standby Flashing: data passing through the port Off: port not connected

IN1 IN2 100 Mb riser Ethernet ports. Used for the connection of distributors, such as repeaters, switches, internal units etc. OUT1 OUT2 OUT3 OUT4: 10 Mb extension Ethernet port. Used for the connection of distributors, such as repeaters, switches, internal units etc. + -: External power supply terminals. Connection of power supply unit art. 1441 or art. 1441A

For correct operation of the system protecting art. 1440, the riser must be connected with input on port IN1 and output on port IN2

VIP system riser signal repeater module Art. 1447

The repeater module art. 1447 is used to extend networks, making it possible to connect a VIP device at a greater distance than would be possible using a single section of point-to-point Ethernet and, if necessary, to connect two risers to each other.

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

Ethernet In port

2. Ethernet Out port

3. JP2 Jumper: negative pole separation (GND)

4. JP1 Jumper: positive pole separation (+)

The two Ethernet ports are polarised as an IN input port and an OUT output port. In general, the repeater will receive power from the input port and supply power to the remote device (door-entry phone, switch, repeater) via the output port. This distinction was made to interrupt power supply propagation between the In port and the Out port by removing Jumpers JP1 and JP2, in order to separate - for example - the power supplies to two risers. The device even operates correctly if the output port is switched with the input port. In this case, however, it will no longer be possible to interrupt power supply propagation.

VIP system device barcode reader art. 1450

Barcode reader for identifying the unique code of the devices making up the VIP system, for example: door-entry phones, door entry monitors, external units, actuators, etc...

Technical characteristics

Power supply USB

Internal units

Planux backplate art. 6231 and Planux monitor art. 6202

Technical characteristics

Absorption

Power supply 36/57 Vdc 3A Max.

Dimensions H: 6.2 cm W: 7.2 cm D: 9 cm

Connection terminals

0V PA N CFP

S+

VIP - POE selector for ﬁ tting to the latter if the internal unit is used on a standard - not VIP - PoE network

RJ45 Ethernet connector for connecting the internal unit to the VIP network

SD Card slot

We recommend using VIP Manager software Art. 1449 to conﬁ gure the internal unit (see speciﬁ c manual). However, the main parameters can also be conﬁ gured directly, on the device itself (see page 50).

For wiring details, refer to the diagrams section at the end of this manual.

Min. 0.7 W Max. 2.6 W (value for complete backplate + monitor product)

Reference for CFP and PAN terminals Panic contact terminal Floor door call contact terminal

Additional ringtone terminals

OPOP+ 0V

OUT 1

Optically coupled input terminals

Reference for OUT1 and AL terminals Output terminal 12 V MAX 100 mA

Alarm contact terminal

7Stelle monitor art. 6501

Connection terminals

OP+ OP-

S+ CFP

PAN 0V

AL OUT1

Optically coupled input terminals

Additional ringtone terminals Floor door call contact terminal

Panic contact terminal Reference for CFP, PAN and S+ terminals

Alarm contact terminal Output terminal 12 V MAX 100 mA

Reference for OUT1 and AL terminals

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

VIP - POE selector for ﬁ tting to the latter if the internal unit is used on a standard - not VIP - PoE network

RJ45 Ethernet connector for connecting the internal unit to the VIP network

SD Card slot

For wiring details, refer to the diagrams section at the end of this manual.

Smart monitor art. 6304

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

For wiring details, refer to the diagrams section at the end of this manual.

Connection terminals

OUT1 IN1

S+ 0V

VIP - POE selector for ﬁ tting to the latter if the internal unit is used on a standard - not VIP - PoE network

RJ45 Ethernet connector for connecting the internal unit to the VIP network

Optional buttons art. 6332

Output terminal 12 V MAX 100 mA Input terminal 1

Additional ringtone terminals Reference for CFP, PAN and S+ terminals

CFP AL

PAN 0V

Floor door call contact terminal

Alarm contact terminal

Panic contact terminal Reference for OUT1 and AL terminals

Easycom door-entry phone art. 6203

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Dimensions H: 16 cm W: 9.1 cm D: 2.7 cm

Connection terminals

GND

S+

S-

CFP

Ringtone repetition terminals

Floor door call contact terminal

Alarm contact terminal Common terminal for alarm contact and ﬂ oor door call

VIP - POE selector for ﬁ tting to the latter if the internal unit is used on a standard - not VIP - PoE network

RJ45 Ethernet connector for connecting the internal unit to the VIP network

Use VIP Manager software Art. 1449 to conﬁ gure the internal unit (see speciﬁ c manual).

For wiring details, refer to the diagrams section at the end of this manual.

VIP switchboard art. 1952

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

For wiring details, refer to the diagrams section at the end of this manual.

Powercom series external units

Powercom module art. 3331/0 - 1 - 2 for audio/video units

Module designed for audio/video speaker units. Requires audio/video unit art. 4662C to complete installation. Versions with 0, 1 and 2 buttons are available.

Powercom series colour audio/video unit for VIP system art. 4662C

VIP system audio-video unit with terminal block, complete with spherical lens adjustable colour camera.

4-pole cable connector

For wiring details, refer to the diagrams section at the end of this manual.

Powercom call button module art. 3337/3 - 4 - 6

Additional call button module. Versions with 3, 4 and 6 buttons are available.

NC / NO: Door lock connection terminals COM: Common terminal DO: Door Open terminal RTE / -: Timed relay control terminals ~ ~: Power supply terminals TX- / TX+: Ethernet transmission line terminals RX- / RX+: Ethernet reception line terminals

Technical characteristics

Power supply 12 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 10.2 cm W: 5.5 cm D: 3.5 cm

For wiring details, see page 28.

Powercom series backlit indication module art. 3327

Backlit module with LEDs for various indications and additional 10 A relay.

Technical characteristics

Power supply 12 Vac 3A

Temperature thresholds -30 / +55°C

Dimensions H: 8.9 cm W: 11.2 cm D: 4 cm

For wiring details, see page 29.

Powercom series digital call module for VIP system art. 3370

Digital call module complete with electronic directory with graphic LCD display. Also functions as a coded electronic key module. Names can be scrolled using the two search buttons or by entering the initial letter of the required name. Once the right name has been found, press the call button. The user code can also be entered to make a direct call.

D E F

PQR

M N O

WXYZ

. , :

Technical characteristics

Power supply 12 Vac

Temperature thresholds -30 / +55°C

A B C

J K L

T U

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

~ ~: Power supply terminals PR -: Programming terminals TX RX: RS232 line terminals (not used)

-: RS232 line negative terminal (not used) D- D: RS485 data line

4-pole cable connector

For wiring details, refer to the diagrams section at the end of this manual.

N.B. Up to this point, the functions linked to the RS485 line have not been implemented.

IKall series external units

IKall module art. 33400 - 33401 - 33402 for audio units

Module with facility for audio porter units. Requires audio unit art. 1682 to complete installation. Versions with 0, 1 and 2 buttons are available.

IKall module art. 33410 - 33411 - 33412 for audio/video units

Module preset for audio/video speaker units. Requires audio/video unit art. 4682C to complete installation. Versions with 0, 1 and 2 buttons are available.

IKall series audio unit for VIP system art. 1682

Door-entry phone porter unit for VIP system, complete with terminal block.

Technical characteristics

Power supply 33 Vdc

Temperature thresholds -30 / +55°C

Dimensions H: 10.2 cm W: 5.5 cm D: 3.5 cm

8-pole cable connector

For wiring details, refer to the diagrams section at the end of this manual.

-V

GND

SE: Door lock connection terminals NC / NO: Normally closed and normally open output terminals COM: Common terminal RTE / GND: Timed relay control terminals

-V +V: Power supply terminals TX- / TX+: Ethernet transmission line terminals RX- / RX+: Ethernet reception line terminals

IKall series colour audio/video unit for VIP system art. 4682C

VIP system audio-video unit with terminal block, complete with mini lens adjustable colour camera.

-V

GND

8-pole cable connector

Technical characteristics

Power supply 33 Vdc

Temperature thresholds -30 / +55°C

Dimensions H: 10.2 cm W: 5.5 cm D: 3.5 cm

SE: Door lock connection terminals NC / NO: Normally closed and normally open output terminals COM: Common terminal RTE / GND: Timed relay control terminals

-V +V: Power supply terminals TX- / TX+: Ethernet transmission line terminals RX- / RX+: Ethernet reception line terminals

For wiring details, refer to the diagrams section at the end of this manual.

IKall call button module art. 33433 - 33434 - 33436

Additional call button module. Versions with 3, 4 and 6 buttons are available.

For wiring details, see page 30.

IKall series digital call module for VIP system art. 3360A

Technical characteristics

Power supply 24 Vac - 33 Vdc

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

24Vac

D+

485

D-

485

GND

PRG

8-pole cable connector

24 Vac: Local power supply terminals (for use when

a dedicated power supply unit needs to be connected for module Art. 3360A)

PRG GND: Programming terminals 485 D- 485D+: RS485 data line

For wiring details, refer to the diagrams section at the end of this manual.

Vandalcom series external units

Vandalcom series digital call module for VIP system art. 3270, for Powercom external unit art. 4662C

Digital call module complete with electronic directory with graphic LCD display. Also functions as a coded electronic key module. The user code can be entered directly to make a call.

Technical characteristics

Power supply 12 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

For wiring details, refer to the diagrams section at the end of this manual.

12 12

~ ~

NOT USED NOT USED

Powercom power supply terminals

Data connection terminal for the external unit Common terminal

Programming terminals

D D-

NOT USED

Vandalcom series digital call module for VIP system art. 3070B, for Powercom external units art. 4662C and IKall external units art. 4682C

Digital call module complete with electronic directory with graphic LCD display. Also functions as a coded electronic key module. The user code can be entered directly to make a call.

Technical characteristics

Power supply 12 Vac - 33 Vdc

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

For wiring details, refer to the diagrams section at the end of this manual.

12 12

V+

V-

Ikall power supply terminals

~ ~

Powercom power supply terminals

Data connection terminal for the external unit Common terminal

Programming terminals

D+ 485 D- 485

NOT USED

Vandalcom series digital call module for VIP system art. 3272, for Powercom external unit art. 4662C

Digital call module complete with electronic directory with graphic LCD display. Name scrolling is carried out using two search buttons. Once the right name has been found, press the call button.

Technical characteristics

Power supply 12 Vac

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

For wiring details, refer to the diagrams section at the end of this manual.

12 12

~ ~

NOT USED NOT USED

Powercom power supply terminals

Data connection terminal for the external unit Common terminal

Programming terminals.

D D-

NOT USED

Vandalcom series digital call module for VIP system art. 3072B, for Powercom external units art. 4662C and IKall external units art. 4682C

Digital call module complete with electronic directory with graphic LCD display. Name scrolling is carried out using two search buttons. Once the right name has been found, press the call button.

Technical characteristics

Power supply 12 Vac - 33 Vdc

Temperature thresholds -30 / +55°C

Dimensions H: 18 cm W: 11.2 cm D: 4 cm

For wiring details, refer to the diagrams section at the end of this manual.

12 12

V+

V-

Ikall power supply terminals

~ ~

Powercom power supply terminals

Data connection terminal for the external unit Common terminal

Programming terminals

D+ 485 D- 485

NOT USED

Module art. 3268I/0 -1 - 2 designed for a/v units, iKall series

Module designed for audio/video porter units. Requires audio/video unit art. 4682C to complete installation. Versions with 0, 1 and 2 buttons are available.

For wiring details, see page 33.

Module art. 3269/0 - 1 - 2 designed for a/v units, Powercom series

Module preset for audio/video speaker units. Requires audio/video unit art. 4662C to complete installation. Versions with 0, 1 and 2 buttons are available.

For wiring details, see page 32.

Module art. 3262I/0 -1 - 2 designed for audio units, IKall series

Module with facility for audio porter units. Requires audio unit art. 1682 to complete installation. Versions with 0, 1 and 2 buttons are available.

For wiring details, see page 33.

Vandalcom series 4-button module art. 3064/C for VIP system

Module with 4 additional call buttons.

For wiring details, see page 34.

VIP system accessories

Remote camera module art. 1445

Remote camera module art. 1445 transmits the video signals received from 4 cameras.

1. Video signal from cameras input terminals

V1 SH

V2 SH

V3 SH

V4 SH

2. Secondary power supply terminals.

To be used if the POE network power supply is insufﬁ cient

Input terminal for composite video signal from camera 1 Camera 1 shield terminal

Input terminal for composite video signal from camera 2 Camera 2 shield terminal

Input terminal for composite video signal from camera 3 Camera 3 shield terminal

Input terminal for composite video signal from camera 4 Camera 4 shield terminal

AUX GND

3. Network connection Ethernet port.

4. RS485 line terminals.

GND D-

D+

5. RS485 line closure jumper

12 - 24 V DC power supply terminal Earth terminal

Earth terminal

RS485 data line

N.B. Up to this point, the functions linked to the RS485 line have not been implemented.

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

For wiring details, refer to the diagrams section at the end of this manual.

VIP system actuator relay module Art. 1443

IO module art. 1443 can be used to control 1 relay on board the device itself or on board any expansion units art. SK9071 connected to it.

Terminal block for on-board relay inputs and output

GND IN1

IN2 GND

OC1 NC

COM NO

Earth terminal Input terminal 1

Input terminal 2 Earth terminal

Open collector output terminal On-board relay normally closed terminals

Common terminal for NC / NO On-board relay normally open terminals

2. Terminals for connection of expansion module art. SK9071

D+ D-

GND 12V

Art. Sk9071 connection terminals

Art. Sk9071 12 VDC power supply terminals

3. Network connection Ethernet port

4. VIP - Standard POE power supply selector

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

For wiring details, refer to the diagrams section at the end of this manual.

PAL / NTSC video output module art. 1446

Module art. 1446 provides an outgoing video signal from the system in PAL or NTSC format.

Terminal block for video outputs

C Y

S- GND V

COM SPK

Terminal block for open collector outputs

OUT 1 OUT 2

3. Network connection Ethernet port

4. Input terminal block

S-VIDEO video output terminals

CVBS video output terminals

Terminal not used Terminal not used

Generic open collector output terminal (in closure to GND) Terminal not used

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 36/57 Vdc 3A Max.

Temperature thresholds -30 / +55°C

Dimensions 4 DIN modules / H: 3.6 cm W: 6.5 cm D: 8.3 cm

IN1 COM

IN2

For wiring details, refer to the diagrams section at the end of this manual.

Terminal not used Terminal not used

Terminal not used

Expansion module art. SK9071

Expansion module art. SK9071 for use in conjunction with the IO module art. 1443.

Technical characteristics

Absorption Min. 0.7 W Max. 2.6 W

Power supply 12 Vdc

Temperature thresholds -30 / +55°C

Dimensions 8 DIN modules / H: 5.5 cm W: 14 cm D: 9.5 cm

Connection terminal blocks

B A

DD+

Terminals not used

Art. 1443 connection terminals

Art. 1443 12 VDC power supply terminals

B A

J1...J10 Relay output terminals

For wiring details, refer to the diagrams section at the end of this manual.

Chapter 3: System preparation and speciﬁ cations

Connection distances

Connection distances from power supply unit art. 1395 to external unit art. 3331

0.5 mm2 (Ø 0.8 mm - AWG 20)

Comelit art. 4576-4578

A Max.

10 m

1395

1 mm2 (Ø 1.2 mm - AWG 17)

1.5 mm2 (Ø 1.4 mm - AWG 15)

2.5 mm2 (Ø 1.8 mm - AWG 13)

Comelit art. 4577

25 m

40 m

60 m

Connection distances between external unit and Switch art. 1440

The connection distance varies depending on the port used on Switch art. 1440.

Art. 1440

10 Mb

Using the 10 Mb port

250 m

Art. 1440

100 Mb

Using the 100 Mb port

120 m

Connection distances between 2 Switches art. 1440

The connection distance varies depending on the ports used on Switches art. 1440.

Art. 1440

10 Mb

250 m

Art. 1440

100 Mb

250 m

Art. 1440

10 Mb

250 m

Art. 1440

100 Mb

120 m

Art. 1440

10 Mb

Art. 1440

10 Mb

Art. 1440

100 Mb

Art. 1440

100 Mb

Connection distances from Switch art. 1440 / Repeater art. 1447 to door-entry phones / door entry monitors

Art. 1440

Art. 1447

250 m

Connection distances from Switch art. 1440 / Repeater art. 1447 to switchboard art. 1952

The connection distance varies depending on the port used on Switch art. 1440.

Art. 1440

Using the 10 Mb port

10 Mb

250 m

Art. 1447

Art. 1440

Using the 100 Mb port

100 Mb

120 m

Art. 1447

Expanding a system using repeater art. 1447

Repeaters art. 1447 can be connected in series to increase the connection distance between two Switches art. 1440 (Max. 8).

The connection distance between a Switch and a Repeater varies depending on the port used on Switch art. 1440.

Art. 1440 Art. 1447

10 Mb

250 m

Art. 1440

100 Mb

Art. 1447

120 m

The connection distance between 2 Repeaters is always 120 m.

See diagram VIP/005

Art. 1447

120 m

Art. 1447

120 m

Art. 1447

Guide to ﬁ tting a UTP / STP RJ45 Direct network cable

The recommended cables are:

• UTP (Unshielded Twisted Pair): not protected from electromagnetic interference, maximum length 100 metres. We recommend the use of a Panduit cable code NUL5C04BU-CE.

• STP (Shielded Twisted Pair): similar to the UTP but with a metal sheath.

The UTP and STP can fall into various categories. Category 5 (CAT 5) cables or greater must be used for the VIP system.

The tools required for ﬁ tting are as follows:

• Crimping pliers 6-P 8-P. We recommend using 8-pole Panduit pliers code MPT5-8A.

• Tester for RJ45 cables.

The tester must only be used while the system is off

• 2 RJ45 connectors for each section of cable. We recommend using Panduit connectors code MP588-L.

Fitting procedure

1. Most crimping pliers have two pairs of blades, one pair on one side to strip the wires and another pair on the other side to cut the wires. If the pliers do not allow you to cut the cable sheath, you should use a blade and cut the sheath with it, removing a length of about three centimetres. Be especially careful not to cut or scratch the wires inside the sheath; once cut, most sheaths break if they are folded or pulled.

30mm

2. When you have removed the sheath, you will have four pairs of wires, twisted together two by two and of different colours. Untwist the wire pairs so you have 8 separate wires, but make sure you mark them if they are not of different colours (in some cables, the white/colour wires are completely white).

3. Spread the wires out into a fan, in the order in which you need to crimp them from left to right. The cable conﬁ guration is illustrated in Table 1 and Figure A.

Table 1

FIGURE A

Connector 1 Connector 2

White / Orange White / Orange

Orange Orange

White / Green White / Green

Blue Blue

White / Blue White / Blue

Green Green

White / Brown White / Brown

Brown Brown

N.B.: if the cable colours are different, simply maintain the correct correspondences

4. Hold the wires tightly between two ﬁ ngers and ﬂ atten them so that they are side by side, then straighten them by pulling them taut with your ﬁ ngers to remove slight curves caused by the previous twisting. Make sure they stay in the correct order.

5. Continuing to hold them taut, trim the excess by 2 centimetres, so that they are all the same length.

20mm

6. Insert the wires into the RJ45 connector, still holding them tightly between your ﬁ ngers. The connector tab should be facing downwards and not visible. The insulating sheath should just reach the edge of the connector.

7. Make sure the wires are fully inserted by inspecting the side of the transparent connector. Next, insert the connector into the crimping pliers and, using both hands, crimp the connector so as to secure the wires. The pliers should not open if they did not close fully.

8. Now repeat steps 1 to 7 above, to crimp the cable on the other side.

Complete connector example

Chapter 4: Mounting external units and internal units

During the installation of various products, we recommend a document is compiled to keep track of the location of the device within the system. An example of how to compile such a document is provided below:

Mac Address VIP Address Description

00252900082B 00002001 South gate external unit

00252900086C 00002002 North gate external unit

00252900023R 00000139 Apartment 1 internal unit

00252900052A 00000127 Smith apartment internal unit

The Mac address for the product is indicated by a label on the packaging box and another label applied directly to the product itself.

For all products, the VIP address is programmed using VIP Manager software art. 1449, with the exception of monitors art. 6202, art. 6304, art. 6501 and art. 1952, which can be used to set the VIP address, even locally.

+ 61 hidden pages