Code 3 Quick Disconnect User Manual

INSTALLATION
& OPERATION
MANUAL

QUICK

DISCONNECT

IMPORTANT:

IMPORTANT:

QUICK DISCONNECT

Contents:

Installation Photos ...................................................... 2

Drill Template.............................................................. 3

Warranty .....................................................................

Read all instructions before proceeding.

INSTALLER:

This manual must be delivered to the end user of this equipment.

4

Quick Disconnect Installation Guide

a.

c.

11/64 in

4.5 mm

b.

1.3750 in
35 mm

d.

e.

g.

f.

PARTS LIST

T08752 Roof housing with female pins
T08753 Lower body with male pins

Drilling template to
scale. DO NOT resize.

3

WARRANTY

This product was tested and found to be operational at the time of manufacture. Provided this

product is installed and operated in accordance with the manufacturer's recommendations, Code 3,

®

Inc guarantees all parts and components except the lamps for a period of 1 year from the date of
purchase or delivery, whichever is later. Units demonstrated to be defective within the warranty period
will be repaired or replaced at the factory service center at no cost.

Use of a lamp or other electrical load of a wattage higher than installed or recommended by the
factory, or use of inappropriate or inadequate wiring or circuit protection causes this warranty to
become void. Failure or destruction of the product resulting from abuse or unusual use and/or acci­dents is not covered by this warranty.

Code 3, Inc. shall in no way be liable for other damages including consequential, indirect or
special damages whether loss is due to negligence or breach of warranty.

CODE 3, INC. MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY INCLUDING, WITH­OUT LIMITATION, WARRANTIES OF FITNESS OR MERCHANTABILITY, WITH RESPECT TO
THIS PRODUCT.

PRODUCT RETURNS

In order to provide you with faster service, if you are going to return a product for repair or
replacement*, please contact our factory to obtain a Return Goods Authorization Number (RGA
number) before you ship the product to Code 3, Inc. Write the RGA number clearly on the package
near the mailing label. Be sure you use sufficient packing materials to avoid damage to the product
being returned while in transit.

*Code 3, Inc. reserves the right to repair or replace product at its discretion. Code 3, Inc. assumes no responsibility or
liability for expenses incurred for the removal and/or reinstallation of products requiring service and/or repair.

NEED HELP? CALL OUR TECHNICAL ASSISTANCE HOTLINE - [phone]

Code 3 is a registered trademark of Code 3, Inc., a subsidiary of Public Safety Equipment, Inc.

St. Louis, Missouri 63114-2029—USA

Revision 2, 12/2005 - Instruction Book Part No. T08783

10986 N. Warson Road

www.code3pse.com

©2005 Code 3, Inc. Printed in USA

Code 3, Inc.