For more information or to
order any of our products,
please visit our website:
www.cobra.com
Jump Starter/PowerPack
Operating Instructions
1
2
Thank you for purchasing the Cobra CJI 150
jump starter/power pack. Properly used, this
Cobra product will give you many years of
reliable service.
Easy-to-use and designed for reliable
service, the 100W Mobile power pack can
run many AC appliances and 12V DC
appliance whenever you need power for
work or play, at home or on the road.
Important: Please be sure to read and save
the entire manual before using your mobile
power pack. Any misoperation or misusing
may damage the equipment or create
hazardous conditions for the user. Please
keep this manual for future reference.
Should you encounter any problems with this product, or not understand its
many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, Cobra Electronics offers the following
customer assistance services:
For Assistance in the U.S.A.
Automated Help Desk English only.
24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators English and Spanish.
8:00 a.m. to 5:30 p.m. Central Time, Monday through Friday
5
(except holidays) 773-889-3087 (phone).
Questions English and Spanish.
Faxes can be received at 773-622-2269 (fax).
1314
Technical Assistance English only.
www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo@cobra.com (e-mail).
• 100W AC output for operating
household appliances
• 12 Volt DC power outlet for DC
accessories & appliances
• LED super bright emergency
light
• 5V USB port to power up or
charge cellphones, PDAs or
consumer electronic devices
• 1200 Watt (300A) instant
starting power to start vehicles
• Rechargeable internal battery
• LED display indicates the
battery capacity
• Reverse polarity connection
indication & alarm
• On/off safety switch
• Heavy duty cables and clamps
1
Introduction
Important: Please be sure to read and save the entire manual before using your
mobile power pack. Any misoperation or misusing may damage the equipment
or create hazardous conditions for the user. Please keep this manual for future
reference.
The following conventions are used in this manual:
WARNING
CAUTIONCautions identify conditions or practices that could result
NOTE: These notes describe an important action item or an item that you
must pay attention to.
Abbreviations and Acronyms:
AAmpere
ACAlternating Current
AhAmp-hours
DCDirect Current
LEDlight-emitting diode
mAmilli-Ampere
VVolt
WWatt
Warnings identify conditions that could result in personal
injury or loss of life.
in damage to the unit or to other equipment.
Introduction
Important Safety Instructions
WARNING: Charge unit fully prior to use.
Keep unit clear of fire and water. The 100W mobile power pack is not
intended for use in connection with life support systems or other medical
equipment or devices.
WARNING: Shock hazard.
Keep away from children. The power pack generates the same potentially
lethal AC power as a normal household wall outlet. Do not insert foreign
objects into the AC outlet, the DC power pack socket, the jump start cable
port, or the ventilation hole, do not expose this product to water, rain, snow,
condensation, or spray. Do not open the power pack. Have a qualified
technician perform any service work.
WARNING: Explosion hazard
Do not use this product where there are flammable fumes or gases, such as
in the bilge of a gasoline-powered boat, or near propane tanks. Do not use
this product in an enclosure containing automotive-type lead-acid batteries.
These batteries, unlike the sealed AGM battery in power pack, vent explosive
hydrogen gas which can be ignited by sparks from electrical connections.
When working on electrical equipment, always ensure someone is nearby to
help you in an emergency.
WARNING: Heated surface
Ensure at least 2” (5cm) air space is maintained on all sides of the power
pack. During operation, keep away from materials that may be affected by
high temperatures such as blankets, pillows and sleeping bags.
WARNING: Fire hazard
Never allow jump start cables’ red and black clamps to touch each other or
another common metal conductor. This could cause damage to the unit
and/or create a sparking/explosion hazard. Always disconnect the jump start
cables from the unit after use and clip the plastic guard over the jump start
cable port.
Jump start cable clamps must be connected positive to positive (red clamp
to battery “+”) and negative to negative (black clamp to battery “-“or engine
ground). A reverse polarity connection (positive to negative) may cause
damage to the unit and/or create a sparking/explosion hazard.
32
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.