Clarion NAX983HD User Manual

Owner’s manual

Mode d’emploi

Benutzerhandbuch

Manuale dell’utente

Gebruikershandleiding

Guía de usuario

Ägarhandbok

Manual do utilizador

Brugervejledning

NAX983HD

HDD NAVIGATION SYSTEM

SYSTEME DE NAVIGATION HDD

HDD-NAVIGATIONSSYSTEM

SISTEMA DI NAVIGAZIONE HDD

HDD-NAVIGATIESYSTEEM

SISTEMA DE NAVEGACIÓN HDD

NAVIGATIONSSYSTEM MED HÅRDDISK

SISTEMA DE NAVEGAÇÃO COM HDD (UNIDADE DE DISCO RÍGIDO)

HDD-NAVIGATIONSSYSTEM

1. Preface

Safety Precautions

When using this navigation system, follow the precautions listed below. After reading this manual, be sure to keep it in a handy place (such as the glove box of your car).

Warnings

• This navigation system should not be used as a substitute for your own judgment. Any route suggestions made by this navigation system may never override any local traffic regulations, your own judgment, and/or knowledge of safe driving practices. Disregard route suggestions by the navigation system if such suggestions would: cause you to perform a hazardous or illegal maneuver, place you in a hazardous situation, or route you into an area you consider unsafe.

• The advice provided by the navigation system is to be regarded only as a suggestion(s)/ There may be situations where the navigation system displays the vehicle’s location incorrectly, fails to suggest the shortest course, and/or fails to direct you to your desired destination. In such situations, rely on your own driving judgment, taking into account current driving conditions.

• Do not use the navigation system to route you to emergency services. The database does not contain a complete listing of locations of emergency service providers such as police, fire stations, hospitals and clinics. Please use your judgment and your ability to ask for directions in these situations.

• As a driver you are solely responsible for your road safety.

• In order to avoid a traffic accident or traffic offence, remember that actual road conditions

and traffic regulations take precedence over the information contained in the navigation system.

• Accordingly, the Software may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used. Please observe the actual traffic circumstances and regulations at all times while driving.

• The navigation system does not provide, or account for in any way; information regarding traffic and road laws; vehicle specifications including weight, height, width, load, and/or speed restrictions; road conditions including road slope, grade, and/or surface conditions; obstruction information including bridge and tunnel height and width, and/or other prevailing driving and/or road conditions. Always rely on your own driving judgment, taking into account current driving conditions.

• Minimize the amount of time spent viewing the screen while driving.

• The driver should not operate this unit while driving.

Be sure to stop the vehicle in a safe place when the driver is operating this unit. For safety, some of the navigation functions are prohibited if the vehicle is not stopped with the parking brake engaged.

• Do not disassemble or modify this unit. It may cause an accident, fire, or electric shock.

• Do not use this unit when a trouble exists, such as no screen content appears or no sound is audible. It may cause an accident, fire, or electric shock. For that case, consult your authorized dealer or a nearest Clarion service centre.

• In case of a problem, such as foreign materials have entered in the unit, the unit gets wet, or smoke or strange smells come out of the unit, etc., stop using this unit immediately, and consult your authorized dealer or a nearest Clarion service centre. Using it in that condition may cause an accident, fire, or electric shock.

• Use a fuse with the same specification only when replacing the fuse. Using a fuse with a different specification may causes a fire.

• For the installation of this unit or a change in the installation, ask your authorized dealer or a nearest Clarion service centre for safety. Professional skills and experiences are required to do so.

English

NAX983HD

Cautions

English

• While driving, set the volume so that sound from outside the vehicle can be heard. Driving without hearing sound from the outside of the vehicle may cause a traffic incident.

• Do not use this unit without installing in the vehicle properly. It may cause an injury or electric shock.

CAUTION

Notes on Data Stored in This System

If you transfer or resell this unit (NAX983HD) to a third party or abandon this unit, note the following matters, deal with them under your own appropriate management.

● For your privacy protection

Initialize (delete) all data (address data etc.) including private information stored in the hard

disk and the memory by the procedures described in this manual. For details, see “Resetting to the Factory Settings” (P. 54).

About This Manual

This book is the manual of the navigation system (NAX983HD) that explains the functions, operation procedures, and notes on use when connecting it with main unit (MAX688RBT,etc. navigation features. Read this manual thoroughly before using the navigation system, and use it correctly.

• Please be aware that the device may be different from the manual according to the changes of the specifications.

● Symbols used in this manual

Note: : Lists what should be noted when operating or referential information. [ ] button : Indicates a button on main unit (MAX688RBT,etc. [ ] key : Indicates a menu item on the screen. ➜ : Indicates a title and page number on which recommended reference information is

*1: This device is referred to “main unit” hereafter in this manual.

described.

)

) and using the

NAX983HD

Notes on Handling

• In no event shall Clarion be liable for any incidental damage (including, but not limited to, loss of the business profit or change/loss of the data) caused from use or inability to use of this product.

English

About the navigation system

● Important

• To prevent discharge of the car battery, use this system with the engine of the vehicle running as much as possible.

• The housing of this unit may become hot because this unit has a high-speed CPU. Be careful to handle the unit during navigating or immediately after turning the power off.

• Turn off the power of the vehicle when connecting or disconnecting wires. Doing this while the power of the vehicle is turned on, may cause a trouble or malfunction.

Note:

• When using this unit first time after purchasing, or

not used for long periods of time, it might take about 5 to 15 minutes until the current location is determined using GPS. Moreover, even when using it often, it may take about 2 to 3 minutes until the current location is determined according to the GPS measuring situation.

• Provided RDS TMC information about traffic

incidents may not be up to date. Use the provided RDS TMC information as a reference only.

• When the route (path) cannot be calculated, move

desired destination to a nearby main road and perform calculation again. It may be impossible to find a route in case the car location is too close to the desired destination.

• For vehicles equipped with an intelligent key, do

not bring the intelligent key close to the unit of the navigation system. The navigation system may not operate correctly.

• If an electrical equipment that generates a strong

electrical noise is used near this unit, the screen may be disturbed and noise may be generated. In this case, keep away such an electrical equipment or refrain from using it.

About the hard disk drive

● Important

•Data

• Never detach the hard disk drive by yourself. In

saved to the hard disk drive may get lost in case of a breakdown, malfunction, or other trouble of this unit. It is recommended that you back up your important data to a personal computer by using the USB memory stick. ➜ “Backing up User Data” (P. 54)

case data erased or destroyed due to this action, no repair covered by warranty can be granted.

stored on the hard disk drive gets

• Operation of the navigation system may be limited to protect the hard disk drive if the temperature is extremely high or low. In such a case, please wait until temperature becomes normal again.

• Though certain buzzing can be heard when the hard disk drive is working, this is not a malfunction.

*1: Including the stored locations and their data,

route data, data stored in the Favourite & Frequent List, setting data set from the Setting menu, and data imported from the USB memory stick (Wallpapers, Safety Camera locations, etc.).

About the USB port

● Important

• The USB memory stick may stick out when inserted, so it may cause danger during driving. In such cases, you can use a commercial USB extension cable, etc., but use it safely under your own judgment.

• The USB memories sticks must be recognized as “USB mass storage class” to work properly. Some models may not operate correctly.

• When the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage.

When using an USB memory stick, we recommend that you backup your data stored on it before by using a personal computer etc.

• Data files may be broken when using USB memories sticks in the following situation: When disconnecting the USB memory stick or turning the power off during writing or reading data. When affected by static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed.

• Some USB memorie sticks cannot be inserted to the main unit because of their shape. In such cases, use a commercial USB extension cable to connect them.

• Connecting with the computer is not covered.

• Music files (MP3, WMA, etc.) stored in the USB memory stick cannot be played back.

NAX983HD

Notes on Handling

English

Cleaning the unit

● Important

• To clean the unit, use a soft dry cloth and gently wipe off the dirt. For tough dirt, apply

some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel. Also, leaving rubber or plastic products in contact with the cabinet for long periods of time may cause stains.

NAX983HD

Contents

1. Preface .......................................................................................................................... 3

Safety Precautions ......................................................................................................... 3

Notes on Data Stored in This System ............................................................................ 4

About This Manual ......................................................................................................... 4

Notes on Handling.......................................................................................................... 5

Contents ......................................................................................................................... 7

2. Basic Operations............................................................................................................ 8

Turning the Power ON/OFF............................................................................................ 8

Switching the Operation Mode ....................................................................................... 8

Name and Function of the Controls................................................................................ 8

Menu Types and Operation.......................................................................................... 10

Map Screen Features................................................................................................... 14

Manipulating the Map Screen....................................................................................... 20

Outline of Destination Entering Procedures ................................................................. 23

3. Entering the Destination............................................................................................ 26

Searching Your Destination from the Destination Menu............................................... 26

Searching Your Destination from the Map Screen ....................................................... 30

Searching for POI Using the Quick POI Function......................................................... 30

Searching Your Destination from the Favourite & Frequent List .................................. 31

Setting the Destination and Starting the Route Guidance............................................ 32

4. Route Guidance.......................................................................................................... 34

Route Guidance Screen Features................................................................................ 34

About the Voice Guidance............................................................................................ 36

Changing/Editing the Route Settings ........................................................................... 36

Notes on the Route Guidance ...................................................................................... 39

Notes on the Voice Guidance....................................................................................... 40

5. Traffic Information...................................................................................................... 41

Displaying the Traffic Information................................................................................. 41

Notes on the Traffic Information ................................................................................... 44

6. System Settings ......................................................................................................... 45

Navigation Settings ...................................................................................................... 46

Display Settings............................................................................................................ 49

Registering/Editing the Data......................................................................................... 50

Clock Settings .............................................................................................................. 52

Language Setting ......................................................................................................... 52

Volume/Voice Settings ................................................................................................. 52

Importing Data via USB Port ........................................................................................ 53

Service Options............................................................................................................ 53

Setting Safety Camera ................................................................................................. 54

Monitor Adjustment ...................................................................................................... 55

7. Using the Favourite & Frequent Menu...................................................................... 56

What is the Favourite & Frequent List? ........................................................................ 56

Using Favourite & Frequent List................................................................................... 56

8. Voice Command Operations....................................................................................... 59

Voice Command Features............................................................................................ 59

List of the Voice Commands ........................................................................................ 60

Notes on the Voice Command Operations................................................................... 62

9. Others.......................................................................................................................... 63

Troubleshooting............................................................................................................ 63

Error Messages ............................................................................................................ 63

About the Positioning Error .......................................................................................... 64

Specifications ............................................................................................................... 64

English

NAX983HD

English

2. Basic Operations

Turning the Power ON/OFF

The navigation system will be started up when the power of the vehicle is turned on, and terminated when it is turned off. The opening screen is displayed when the system is started up, and then caution message is displayed. Read the displayed message thoroughly. After a while, the [OK] key is displayed. Touch the [OK] key to display the Current Location screen.

Note:

• When you use this unit for the first time, it may take some time for receiving the GPS signal and displaying

the current location (vehicle position).

• You cannot operate the unit while the opening screen is displayed.

Switching the Operation Mode

To switch between the Navigation screen and Audio screen, touch the [AV] key or the [MAP] key displayed at the bottom left of the screen.

Name and Function of the Controls

Navigation unit

1 POWER indicator

Lights when the power of this unit is turned on which is switched by starting the engine/ignition on. Goes off when it is turned off which is switched by stopping the engine/ignition off.

NAX983HD

2 USB port

You can import data or back up/restore user data using an USB memory stick.➜ “Importing Data via USB Port” (P. 53), “Backing up User Data” (P. 54), “Restoring User Data” (P. 54)

Name and Function of the Controls

Main Unit (e.g.: MAX688RBT)

This section explains only the buttons on MAX688RBT used during the Navigation mode. For other buttons, see the operation manual of MAX688RBT.

Note:

The navigation system will not work correctly when driving with the power of the main unit turned off. To display the accurate vehicle position, drive for a while on a smooth road where there is no obstacle in upper sky (GPS signals can be received).

1 [MAP] button

Displays the Map screen of the current location. The screen changes as follows if this button is pressed while displaying the Map screen during the route guidance mode:

Press and hold: Displays the Turn by Turn screen. Press again to return to the Map screen. Press and release: When you have set to display the guidance information in the left of the screen, pressing this button changes the screen to Intersection Map, Turn List on Route, and Current Location Map, in this order.

2 [MENU] button/3 [Navigation] key

Press the [MENU] button to display the Menu screen. Touch the [Navigation] key to display the Navigation Menu screen.

➜ “Monitor Adjustment” (P. 55)

(Menu screen)

English

NAX983HD

Menu Types and Operation

English

This section explains the types of the typical menu screens on the touch panel and their operation.

Top menu (Destination menu)

Pressing the [MENU] button displays the Destination menu screen. By touching the desired menu item

or icon, you can display menu screens or perform operations such as entering a destination. Touching the menu item on the lower part of the screen displays each menu screen. For the entering procedure of the destination, see “Outline of Destination Entering Procedures” (P.

23), and “Entering the Destination” (P.26).

1 2 3

1 [] key

Displays the Favourite & Frequent menu screen.

➜ “Favourite & Frequent menu” (P.11), “Using the Favourite & Frequent Menu” (P. 56)

2 [Route] key

Displays the Route menu screen. ➜ “Changing/Editing the Route Settings” (P.

36)

3 [Setting] key

Displays the Setting menu screen. ➜ “System Settings” (P. 45)

4 [Next] key

Displays the next screen when there are two or more screens in a menu. For the screen shown above, the next page of the Destination menu is displayed when the [Next] key is touched. When the [Prev.] key is displayed, touch the [Prev.] key to return to the previous screen.

5 [Back] key

Returns to the previous screen.

NAX983HD

Menu Types and Operation

Favourite & Frequent menu

Touching the [ ] key in the Top menu or in the Navi Shortcut menu displays the Favourite & Frequent menu screen. Your favourite places can be registered in [Favourite], and places often visited are automatically registered in [Frequent]. From the 3D List screen of the Favourite & Frequent menu, you can enter a destination by an easy operation. From the 2D List screen, you can edit the list items by drag-and-drop operations. For details, see “Using the Favourite & Frequent Menu” (P. 56).

English

NAX983HD

Menu Types and Operation

English

Navi Shortcut menu

Touching the [NAVI] key from the Current Location Map screen displays the Navi Shortcut menu on top of the Map screen. Operate by touching the desired menu items or icons.

[ ] key :

Displays the Favourite & Frequent menu screen.

[Dest] key :

Displays the Top Menu screen of the navigation system.

[Route] key :

Displays the Route menu screen.

[Quick POI] key :

Displays the Search POI screen for nearby POI or POI on the route with five categories. You can customise the categories by touching the [Setting] key on the Quick POI screen. The five categories can also be customised from the Setting menu. ➜ “Quick POI Settings” (P. 48)

[ ] key :

Repeats the current voice guidance.

[ ] key :

Hides the Navi Shortcut menu.

NAX983HD

Menu Types and Operation

Location menu (Menu on scrolled map)

After scrolling the map by touching the Map screen, touch the [OK] key on the screen to display the Location menu at the left side of the screen. You can set the location under the cursor at the centre of the screen as the destination or store it to the Address Book.

English

[Back] key :

Returns to the scrolled Map screen before touching the [OK] key.

[New Dest] key :

Sets the location under the cursor as the destination. When a destination is already set, this old destination is cancelled as soon as the new destination is set.

[Add to Route] key :

When another location is already set as the destination, you can set the location under the cursor as a waypoint. Touching this key displays the Edit Route screen. Specify the desired order of passing to set the location as a waypoint. ➜ “Editing the route” (P. 37)

[Nearby POI] key :

Displays the Search menu screen of the POIs in the vicinity of the location under the cursor.

[Store Location] key :

Registers the location under the cursor in the Address Book.

[Delete] key :

When the cursor points at a registered location, pressing this key deletes this location from the Address Book.

NAX983HD

Map Screen Features

English

Types of the map

There are two types of map: the 2D map and the 3D map. Such as the method of scrolling the map, some operation are different depending on the map types. Moreover, you can display two types of maps

at the same time on the divided screen, and can change the map orientation. Change the map appearance according to your preferences. ➜ “Scrolling the Map” (P. 20), “Changing the map appearance” (P. 20)

● 2D Map

● 3D Map

The 2D map is a map screen represented to the plane just like the map of atlases. It is suitable for searching a destination and confirming the road or route.

The 3D map is a map screen using a viewing position above the vehicle while looking in the direction of the car heading. It is suitable for understanding the image of the direction, because the perspective of the travelling direction can be adjusted as required.

NAX983HD

Map Screen Features

Indicators on the map

Indicators displayed on the Map screen are different according to the conditions at that time. This section explains the main indicators displayed on the Map screen.

Indicators on the map of the current location

1 2 3 4 5

1 [AV] key

Displays the Audio screen.

2 Current street name

Shows the name of the current street.

3 Vehicle mark

Indicates the current location and direction of your vehicle. You can change this mark. ➜ “Vehicle Icon” (P. 49)

4 Map bearing mark/GPS receiving status

Indicates the map orientation. You can change the map orientation. ➜ “Changing the map appearance” (P. 20) In addition, the receiving status of the GPS signal is indicated by the colour of the four corner frames enclosing the bearing mark.

Blue

:Receiving in 3D

Yellow

:Receiving in 2D

Red

:No signal received

5 Clock

Displays the current time.

6 [NAVI] key

Displays the navigation shortcut menu.

7 [Zoom] key

Touch this for zooming in/out the map. ➜ “Zooming IN/OUT the map” (P. 20)

8 Map scale

Indicates the scale of the map currently displayed.

9 [TMC] key

The [TMC] key turns to green and the time that data was received in last is indicated in the upper area while receiving TMC information. Touching the [TMC] key displays the RDS-TMC menu screen. ➜ “TMC Traffic Information Settings” (P. 47)

English

NAX983HD

Map Screen Features

English

Indicators on the scrolled map

Indicators are displayed after scrolling the map. During scrolling, only the scroll cursor is displayed on the map.

3 4

1 [Back] key

Returns to the map of current location.

2 [OK] key

Displays the Location menu. You can set the location under the cursor as the destination or store this location. ➜ “Location menu (Menu on scrolled map)” (P. 13)

3 Scroll cursor

Displayed when scrolling the map.

4 Latitude/longitude information

Displays the latitude/longitude information of the location under the cursor. Whether this is displayed or not can be set. ➜“Map Scrolling Information” (P. 48)

5 Location information

When moving the cursor on a Stored Location, destination, or waypoint, the place name will be displayed. If the TMC icon is put together to the cursor, the TMC information is displayed.

NAX983HD

Map Screen Features

Indicators displayed during the route guidance mode

After a destination is set and travelling is started, the guidance route and various guidance information are displayed on the map. ➜ “Route Guidance Screen Features” (P. 34)

5 46

2 3

1 Small Turn by Turn Arrow display

Displays the turning direction and distance to the next guidance point. Whether it is displayed or not can be set. ➜ “Guidance Settings” (P. 46) This indicator is not displayed on the divided screen display.

2 Expected arrival time and distance to the destination

The expected time of arrival to the destination and the distance from the current location to the destination are displayed. The remaining time and distance to the next waypoint are displayed additionally, if at least one waypoint is existing.

3 Guidance route

The guidance route to the destination is displayed. The colour of the route can be changed. ➜“Route Colour” (P.49)

4 Destination direction

Indicates the direction to the destination from the current location.

5 Guidance point

Indicates the guidance point.

6 Next intersecting Road name and distance

The distance to the next guidance intersection and the name of the next intersecting road will be displayed when you get near to approx. 600 m or 600 yd (2 km or 1.4 mile for a motorway) to the intersection.

English

NAX983HD

Map Screen Features

English

Map symbols

This navigation system indicates information such as roads and facilities using symbols and colours.

Colour of the roads

Motorways : Main roads Minor roads

: :

(Yellow with red border) (Red) (Yellow)

Map symbols (examples)

The following map symbols are displayed on the map.

Municipal Office

Military Base

Airport

Main Station

Station

Ferry Terminal

Service Area

Parking Lot

Parking Garage

Rental Car Company

Petrol Station

Historical Site

Science Museum· Art Museum

Tourist Information Centre

Park & Ride

Recreation Ground

Sports Complex

Library

University or College

Hotel

Restaurant

Shopping Centre

Supermarket

Golf Course

Marina

Other Facilities

Landmark icons

Landmark icons are displayed on the Intersection map screen, etc. Whether they are displayed or not can be set. ➜ “Landmark Icon display” (P. 46)

Hospital

Hotel

NAX983HD

Petrol Station

Restaurant

Service Area

Map Screen Features

TMC traffic information symbols

When the system receives RDS-TMC traffic information, detailed TMC traffic information on the route are displayed on the map. TMC traffic information is displayed on the map with symbols and congestion information colour. ➜ “Traffic Information” (P. 41)

Example of TMC traffic information displayed

● Current location map screen with traffic information

Symbols used for TMC traffic information

● Screen of TMC traffic information on route

English

Accident

Traffic congestion

Contra flow

Fog reduced visibility

Wind

Broken vehicle

Delay

Lane restrictions

Rain

Information

Congestion information colour

Closed : Purple Jammed :Red Moderate : Yellow Free flow : Green No data (unknown): Not displayed (no colour)

Danger

Roadworks

Road surface in poor condition

Snow

Major events

Vehicle on wrong carriage way

Closed road

Slippery road

Weather

NAX983HD

Manipulating the Map Screen

English

Scrolling the Map

Touching the Map screen displays a cursor at the

centre of the screen, and you can scroll the map. For the 2D map, touch the map to scroll the map towards the touched direction. For the 3D map, touch the upper part of the map to scroll the map toward the touched direction, and touch the left or right part to rotate the map while touching.

2D Map

3D Map

[Back] key:

Returns to the current location map screen. [OK] key: You can set the location under the cursor as the

destination or store the location to the Address Book. ➜ “Location menu (Menu on scrolled map)” (P. 13)

Zooming IN/OUT the map

Touching the [Zoom] key on the Map screen displays the scale control keys.

The 2D map can be adjusted in 11 steps, and the 3D map in 10 steps.

[-] key: Decreases the map scale, and shows the map of a wider area. Keep touching it to enter the Free Zoom mode. [+] key: Increases the map scale, and shows a more detailed map. Keep touching it to enter the Free Zoom mode.

[View] key: Displays the Map View menu screen. ➜ “Changing the map appearance” (P. 20)

Note:

The [View] key is not displayed while scrolling the map.

Changing the map appearance

The Map screen can be adjusted regarding orientation or appearance of the map.

Screen examples

• 2D Map

Displaying the map of the current car location

When the [MAP] button on the main unit is pressed, the map around the current location is displayed with the vehicle in the centre of it. When the vehicle runs, the behaviour is the same.

NAX983HD

Manipulating the Map Screen

• 3D Map

• 2D/2D Map

• 2D/3D Map

Touch the [Zoom] key on the Map screen of the current vehicle location, then touch the [View] key at the bottom right of the screen. The Map View menu is displayed.

Note:

You can also adjust these settings from [Navigation] displayed when touching the [Setting] key from the Top menu. ➜ “Map View settings” (P.46)

[D]/[d] key: Scrolls the Map View menu screen up or down. [2D] key: Changes to the map represented to the plane just like the map of atlases.

[3D] key: Changes to the 3D map using a viewing position above the vehicle while looking in the direction of the car heading.

Note:

To change the 3D angle, set the “3D Map Angle” as mentioned below.

[2D/2D] key: Displays two 2D maps right and left on the divided screen. This is convenient to view two maps with different scales.

Note:

To change the orientation or scale of the left map, set the “Left Map Heading” or “Left Map Scale” as mentioned below.

[2D/3D] key: Displays a 2D map at the left and a 3D map at the right on the divided screen.

Note:

To change the orientation or scale of the left map, use the “Left Map Heading” or “Left Map Scale” below-mentioned.

“Turn list on Route”: During the route guidance mode: Set to ON to display the name, distance, and turning direction of the guidance intersection at the left of the screen.

•[ON]

Displays the Turn List screen.

•[OFF]

Hides the Turn List screen.

“Intersection Map”: Changes the setting of the Intersection Close-up display which displays the turning direction of the next guidance intersection.

•[ON]

Displays the Intersection Close-up display.

•[OFF]

Hides the Intersection Close-up display.

“Main Map heading”: Changes the orientation of the map. This control is available when the main map or the right map is set to 2D mode.

•[Heading Up]

The map is displayed with the travelling direction pointing up.

•[North Up]

The map is displayed with north pointing up.

“Left Map Scale”: Changes the scale of the left map. This control is available when a divided map mode is selected.

•[–]

Decreases the map scale, and shows a more detailed map.

•[+]

Increases the map scale, and shows the map of a wider area.

English

NAX983HD

Manipulating the Map Screen

English

“Left Map heading”:

Changes the orientation of the left map. This

control is available when the divided map screen

is displayed.

•[Heading Up]

The map is displayed with the travelling direction pointing up.

• [North Up]

The map is displayed with north pointing up.

“3D Map Angle”:

Changes the angle of the 3D map. This control is

available when the 3D map is displayed.

•[Adjust]

The angle control keys are displayed. You can raise the angle by touching the [E] key, and lower the angle by touching the [e] key.

[Hide Map] key:

Hides the map, and displays the screen

containing only the next guidance point (Turn-by-

Turn screen). This screen can also be displayed

by long press of the [Map] button. When the

navigation system is not in the route guidance

mode, the screen with the direction of vehicle is

displayed.

NAX983HD

Outline of Destination Entering Procedures

To start route guidance, operate the navigation system with the following procedure:

● Select the method of searching destination from the Destination menu screen, then search for

the desired destination.

Select a suitable searching method according to the place to search.

● Confirm the position of the place found with the Set Location menu screen or Place menu

screen, then set the destination.

You can store the place found to the Address Book, or can confirm the information according to the place, as well as set it as destination.

● Start the route guidance from the Set Route menu screen.

You can also display other suggested routes, or confirm information of the route. Other than the above procedure, you can also enter the destination by scrolling the map or from the Favourite & Frequent menu.

Setting destination by entering the address

This section explains the basic operation procedure to set the destination in detail, using the example to specify the destination by entering the address from the Destination Menu. Read this explanation thoroughly because this procedure is similar to other destination entering methods. For other destination entering methods, see “Entering the Destination” (P. 26).

English

1. In the navigation mode, press the [MENU]

button of the main unit. The Top menu (Destination menu) of the navigation system is displayed.

2. Touch the [Address] key.

The Address input screen is displayed.

3. When the country name you wish to go is not

displayed, touch the [Country] key (When the Address screen is displayed, the previous country name is displayed). Then, the list of country names is displayed.

4. Touch the country name you wish to go. The specified country name is displayed.

[I] / [i] Scrolls the list up or down by one item. [D] / [d] Scrolls the list by one page.

5. Touch the [City] key.

Note:

You can omit the city name entry and directly enter a road name.

NAX983HD

Outline of Destination Entering Procedures

English

6. Enter the city name you wish to go to by touching the characters on the screen, then touch the [OK] key.

[] Deletes the last entered character. [Back] Returns to the previous screen. [All Cities] Specify all cities of the specified country for the search. [Last 5 Cities] Displays the list of five city names recently used. Touch desired city name you wish to go to. [All Clear] Deletes all characters entered so far. [A-Z] Displays the alphabetic input keyboard. [Accent] Displays the accent characters input keyboard. [0-9] Displays the number input keyboard. [Symbols] Displays the symbol characters input keyboard. [OK] Searches the map database using entered characters, and proceeds to the city name List.

Note:

• By touching the [OK] key, the city name list is

displayed even if you do not enter all characters.

• During the character entry, the system shows the

city name list automatically when the amount of matching cities is five or smaller.

7. Touch the city name you wish to go to. Then, the system returns to the Address input screen.

[(Alphabet)] Scrolls the list to each initial letter. The total number of list items is displayed at the left of the screen.

8. Touch the [Street] key.

The Street input screen is displayed.

Note:

You can omit the street name entry. By touching the [OK] key, proceed to step 13.

9. Enter the street name you wish to go to by touching characters on the screen, then touch the [OK] key. Enter by the same way as the city name entry. The street name list is displayed.

10.Touch the street name you wish to go to. Then, the system returns to the Address input screen.

NAX983HD

Outline of Destination Entering Procedures

11.Touch the [House No.] key.

The house number input screen is displayed.

14.Touch the [Start] key.

English

The route guidance will be started.

Note:

You can omit the house number entry. By touching the [OK] key proceed to step 13.

12.Enter the house number by touching numbers

on the screen, then touch the [OK] key. The Set Location menu is displayed. The place found is shown with “ ” on the map.

Note:

The range of house numbers you can enter is displayed at the bottom of the screen.

13.Confirm the location, then touch the [OK] key.

The Set Route menu is displayed with the map around the place selected.

Note:

With this screen, you can register the place found or can search facilities (POI) around the place. ➜ “Set

Location menu” (P. 32)

Note:

In this screen, you can also select among other suggested routes with a different routing priority condition, obtain additional route information, and set waypoints. ➜ “Set Route menu” (P. 32)

NAX983HD

English

3. Entering the Destination

Searching Your Destination from the Destination Menu

You can search for a destination from the Destination menu by using various methods. Use a suitable searching method according to the place you wish to go to.

Destination menu screen 1

Destination menu screen 2

1. Press the [MENU] button. The Destination menu screen is displayed. Touching the [Next] key displays the next menu screen.

Note:

You can also display the Destination menu screen by touching the [Dest] key from the Navi Shortcut menu which is displayed by touching the [NAVI] key on the Map screen.

2. Touch the desired searching method. For the operation procedure hereafter, see the explanation of each section.

NAX983HD

Searching Your Destination from the Destination Menu

English

By Address

For the operation procedure using the [Address], see “Setting destination by entering the address” (P. 23)

By Address Book

Specifies a place registered in the navigation system as the destination.

Note:

To use this function, register places beforehand. ➜ “Address Book” (P. 50)

1. Touch the [Address Book] key.

2. From the displayed Address Book list, touch the stored location you wish to go. [Sort] You can select the sorting method.

•[by Number]: Displayed by the registered

order.

•[by Name]: Displayed by the alphabetical

order of the name.

•[by Icon]: Displayed the list classified by

icon type.

•[by Group]: Displayed the list classified by

groups.

Note:

• You can store a new location by touching the

[None (Add New)] key.

• The [by Icon] or [by Group] key is enabled when

there is at least one stored location with such information contained.

• For storing or editing procedure, see “Address

Book” (P. 50).

3. Confirm the location of the destination, then touch the [OK] key.

4. Touch the [Start] key.

By Points of Interest (POI)

Select the category of the place, narrow down the data by specifying the area or entering the name, and then select the place you wish to go to. By touching the [by Name] key, you can also search a place by simply entering the name.

1. Touch the [Points of Interest] key.

2. Touch your desired category. When a additional category list is displayed, touch a category again to select one.

3. Enter the city name and place name, then touch the [OK] key.

4. From the displayed place list, touch the place you wish to go to select it. [by Name] The list is sorted by alphabetical order after pressing this key. This key is displayed when the list is set to the nearby order. [by Dist.] The list is sorted by nearby order after pressing this key. This key is displayed when the list is set to the alphabetical order.

5. Confirm the location of the destination, then touch the [OK] key.

6. Touch the [Start] key.

By Nearby POI

Select the category of the place, then search for places around the current location.

1. Touch the [Nearby POI] key.

2. Touch your desired category. When a additional category list is displayed, touch a category again to select.

3. From the displayed place list, touch the place you wish to go to select it.

4. Confirm the location of the destination, then touch the [OK] key.

5. Touch the [Start] key.

NAX983HD

Searching Your Destination from the Destination Menu

English

Going Home

When your home address is registered, you can start route guidance to your home by a simple operation.

Note:

When your home address is not registered, register it by touching the [Home (Add New)] key. When the list of searching methods appears, register your home address by the desired method. You can also register your home from the [Stored Data] of the Navigation settings. ➜ “Home Location” (P. 50)

1. Touch the [Home] key.

The route to your home is automatically calculated and the route guidance is started.

By Postal Code

You can search for destinations by entering the country name and the postal code of the place you wish to go to.

Note:

In some countries or districts, it may be hard to search specific places. In such cases, use postal code seach as a subsidiary function of searching addresses.

1. Touch the [Postcode] key.

2. Touch the [Country] key, and touch the

desired country name.

3. Touch the [Postcode] key.

The postal code input screen is displayed.

4. Enter the postal code by touching numbers on the screen.

5. Touch the [OK] key.

For the rest of the procedure, read the sections that apply to the country of your residence.

● When the [Country] is set to the United

Kingdom or the Netherlands

1. Touch the [Pinpoint Search] key. [Area Search] Displays the City name list that corresponds to the input postal code. Search a place by the same way of searching by address.

2. Confirm the location of the destination, then touch the [OK] key. If a different place from where you wish to go to is displayed, touch the [Back] key to return to the previous screen, then perform the procedure of “When the [Country] is set to an other than the United Kingdom and the Netherlands” listed below.

3. Touch the [Start] key.

● When the [Country] is set to an other than the United Kingdom and the Netherlands

1. Touch the [Area Search] key.

2. Touch the desired City name to select.

The Address input screen is displayed.

3. If required, enter the Street name and House

No., then touch the [OK] key.

4. Touch the [Start] key.

By Previous Destination

The destinations previously used are registered in the previous destination list (up to 100 locations). You can enter a destination by selecting it from this list. When the previous destination list exceeds 100 items, the oldest entries are automatically deleted.

1. Touch the [Previous Destination] key.

2. From the displayed previous destination list,

touch the place you wish to go.

3. Touch the [OK] key.

4. Touch the [Start] key.

By Previous Starting Point

You can set the last start location as the destination. In case you want to set a return route from the reached destination, you can enter the new destination quickly using this method.

1. Touch the [Previous Starting Point] key.

2. Confirm the location of the destination, then

touch the [OK] key.

3. Touch the [Start] key.

By the stored route

Selects a route previously registered, then set it as the new route.

Note:

To use this function, one or more registered routes are required. When a route is currently set, you can register this route by touching the [None (Add New)] key in case the route contains at least one waypoint. You can also register the current route using the Route menu. ➜ “Stored Route” (P. 51)

1. Touch the [Stored Route] key.

2. From the displayed stored route list, touch the

route you wish to set.

3. Touch the [Start] key.

NAX983HD

Searching Your Destination from the Destination Menu

English

By Motorway Entrance/Exit

You can search an entrance or exit of a motorway to set as the destination.

1. Touch the [M-way Entrance/Exit] key.

2. Touch the [Country] key, then touch the

country name, if necessary.

3. Touch the [Motorway] key.

4. Enter the name of the motorway, then touch

the [OK] key.

5. From the displayed Motorway list, touch the desired motorway to select.

6. Select the [Entrance] or [Exit] key.

7. From the displayed Entrance list or Exit list, touch the place you wish to go to select it. [by Dist.] The list is sorted by nearby order after pressing this key. This key is displayed when the list is set to the order along the road. [on the Way] The list is sorted by order along the road after pressing this key. This key is displayed when the list is set to the nearby order.

8. Confirm the location of the destination, then touch the [OK] key.

9. Touch the [Start] key.

By Intersection

You can specify an intersection as destination by entering the two crossing street names, and set them as destination.

1. Touch the [Intersection] key.

2. Touch the [Country] key, then touch the country name, if necessary.

3. Touch the [City] key, enter the city name, then touch the [OK] key. The city name entry can be omitted.

4. From the displayed City list, touch the city to select it.

5. Touch the [1st Street] key, enter the street name, then touch the [OK] key.

6. From the displayed Street list, touch the street to select it.

7. Select the 2nd Street by a similar procedure as for the 1st Street.

8. Confirm the location of the destination, then touch the [OK] key.

9. Touch the [Start] key.

By City Centre

You can specify a city centre by entering the name of the city centre, and set it as the destination.

1. Touch the [City Centre] key.

2. Touch the [Country] key, then touch the

country name, if necessary.

3. Touch the [City] key, enter the city name, then touch the [OK] key. When you touch the [OK] key without entering a city name, a list of the all city centres in the specified country is displayed.

4. From the displayed City Centre list, touch the city centre to select it. [by Name] The list is sorted by alphabetical order after pressing this key. This key is displayed when the list is set to the nearby order. [by Dist.] The list is sorted by nearby order after pressing this key. This key is displayed when the list is set to the alphabetical order.

5. Confirm the location of the destination, then touch the [OK] key.

6. Touch the [Start] key.

NAX983HD

Searching Your Destination from the Map Screen

English

You can search for a place by scrolling the map, and set it as the destination.

1. Scroll the map by touching the Map screen, and move the cursor to the place you wish to go to. Touch the [OK] key. ➜ “Scrolling the

Map” (P. 20)

Note:

When you search a place far from the current location, change the map scale to search more quickly.

2. Confirm the location of the destination, then

touch the [New Dest] key.

3. Touch the [Start] key.

Searching for POI Using the Quick POI Function

By using the Navi Shortcut menu, you can enter a destination by searching a place near the current position or along the route quickly from five POI categories specified before in the Setting menu. When the destination has been set, you can specify POIs that you want to visit along the route as waypoints, and you can search them quickly. You can customise the five categories in the Setting menu. ➜ “Quick POI Settings” (P. 48)

1. Touch the [NAVI] key on the Map screen.

The Navi Shortcut menu is displayed.

2. Touch the [Quick POI] key.

The Quick POI screen is displayed.

3. Select a category by touching it. The list of the nearby places or along the route of the selected category is displayed. When the destination is already set, the following keys are displayed at the top of the screen. [by Dist.] The list of nearby POI ordered by the distance from the current location is displayed after pressing this key. This key is displayed when displaying the list screen of POI along the route. [along the Route] The list of POI along the route ordered by the distance from the current location is displayed after pressing this key. This key is displayed when displaying the list screen of nearby POI.

4. Select the desired place you wish to go to by touching it. The route guidance to the destination will start. In case a route existed before the selected POI will be added as waypoint.

NAX983HD

Searching Your Destination from the Favourite & Frequent List

You can enter a destination by selecting from the list of the registered favourite places or the places often visited. For detailed usage of the Favourite & Frequent List, see “Using the Favourite & Frequent Menu” (P.

56)

English

By Favourite

You can enter a destination by selecting a place from the Favourite list registered beforehand.

1. From the Top menu or the Navi Shortcut menu, touch the [ ] key. The Favourite list screen is displayed. When your desired icon is not displayed, touch the [N] or [n] key to scroll the list.

2. Touch the desired icon you wish to set as destination. The Set Location menu screen is displayed.

3. Confirm the location of the destination, then touch the [OK] key.

4. Touch the [Start] key.

By Frequent

You can enter a destination by selecting a place from the Frequent list. The places often visited are registered to the Frequent list automatically.

1. From the Top menu or the Navi Shortcut menu, touch the [ ] key. The Favourite & Frequent List screen is displayed.

2. Touch the [Frequent] key. The Frequent list screen is displayed. When your desired icon is not displayed, touch the [N] or [n] key to scroll the list.

3. Confirm the location of the destination, then touch the [OK] key.

4. Touch the [Start] key.

NAX983HD

+ 68 hidden pages

Clarion NAX983HD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual