OWNER'S HANDBOOK
On-line owner's handbook
You can fi nd your handbook on the CITROËN website, under
"MyCitroën".
This personal and customisable space allows you to establish direct
and special contact with CITROËN.
Referring to the owner's handbook on-line also gives you
access to the latest information available, easily identifi ed by
the bookmark, associated with this symbol:
If the "MyCitroën" function is not available on the CITROËN public
website for your country, you can fi nd your handbook at the following
address:
http://service.citroen.com
Select:
The Vehicle documentation link in the home page (no registration is
needed),
the language,
the vehicle, its body style,
the print edition of your handbook appropriate for the date of registration
of your vehicle.
You have access to your handbook on line, together with the latest
information, identifi ed by the symbol:
The "Familiarisation" section at the start of this
document is intended as a quick way of getting
to know your vehicle. Reading the detailed
sections is essential to make the most of your
vehicle, in complete safety.
Your vehicle is fitted with only some of the
equipment described in this document,
depending on the trim level, version and the
specifications for the country in which it is sold.
The fitting of electrical equipment or
accessories which are not recommended
by
CITROËN
may result in a failure of your
vehicle's electronic system. Please note this
specific warning and contact a
CITROËN
dealer to be shown the recommended
equipment and accessories.
We draw your attention to the following...
CITROËN has a presence on every continent,
a complete product range,
bringing together technology and a permanent spirit of innovation,
for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.
At the wheel of your new vehicle,
getting to know each system,
each control, each setting,
makes your trips, your journeys
more comfortable and more enjoyable.
Happy motoring!
Contents
6
364
369
Key
safety warning
additional information
contributes to the protection of the environment
programming a function with the
configuration menu
refer to the page indicated
FAMILIARISATION
ALPHABETICAL
INDEX
VISUAL SEARCH
58
Instrument panel
59
Indicator and warning lamps
70
Gauges and indicators
Adjustment buttons
76
Setting the date and time
76
Clock
78
Trip computer
82
Electronic key - remote
control
84
"Keyless Entry and Starting"
93
Boot
94
Alarm
97
Electric windows
99
Cockpit glass roof
101
Fuel tank
102
Misfuel prevention (Diesel)
106
Front seats
Rear seats
114
Mirrors
115
Steering wheel adjustment
116
Interior fi ttings
120
Boot fi ttings
121
Triangle (stowing)
122
Heating and Ventilation
124
Dual-zone digital air
conditioning
128
Rear screen demist - defrost
28
Presentation
31
Starting / switching off
35
Ready lamp
35
Hybrid4 mode selector
38
Energy consumption /
generation indicator
40
Display of hybrid power fl ow
43
Hybrid4 frequently asked
questions
46
Eco off
Eco-driving
49
Consumption
50
High voltage battery
54
Car washing machine or
tunnel
55
Recovery on a fl at-bed
001 002 003 COMFORTACCESSMONITORINGHYBRID SYSTEM
160
Lighting controls
163
Daytime running lamps
164
Automatic illumination of
headlamps
165
Automatic headlamp dipping
168
Headlamp adjustment
169
Directional lighting
Wiper controls
173
Automatic rain sensitive
wipers
175
Courtesy lamps
176
Interior mood lighting
180
Child seats
182
Deactivating the passenger's
front airbag
188
ISOFIX mountings
193
Child lock
196
Direction indicators
197
Emergency or assistance
call
197
Horn
198
ESC system
202
Seat belts
205
Airbags
DRIVING
132
Electric parking brake
139
Hill start assist
140
Electronic gearbox
Tyre under-infl ation detection
146
Lane departure warning
system
147
Head-up display
150
Speed limiter
152
Cruise control
154
Parking sensors
156
Reversing camera
004
005 006 007
SAFETYCHILD SAFETYVISIBILITY
212
Temporary puncture repair
kit
218
Changing a wheel
226
Snow chains
Changing a bulb
235
Changing a fuse
238
12 V battery
241
Energy economy mode
242
Changing a wiper blade
243
Recovery on a fl at-bed
Towing a trailer
246
Fitting roof bars
247
Accessories
253
Opening the bonnet
254
Diesel engine
255
Running out of fuel (Diesel)
256
Checking levels
260
Checks
266
Electric motor
267
Diesel engine
268
Diesel weights
269
Dimensions
270
Identifi cation markings
274
Emergency or assistance
eMyWay
331
Audio system
008 009 010 011
INFORMATION
CHECKSPRACTICAL
TECHNICAL DATA AUDIO and
TELEMATICS
Familiarisation
Presentation of the Hybrid4 system
Thank you for choosing a DS5 Hybrid4; this
vehicle has characteristics that are different
from conventional vehicles.
Study this handbook to learn about the specific
hybrid functions and for more information, refer
to the "Hybrid system" section.
1.
Diesel HDi engine (front wheel drive).
Electric motor (rear wheel drive).
3.
200 V battery.
Electronic power supervisor.
5.
Alternator-starter motor (Stop & Start).
6.
Electronic gearbox.
Electrical flow.
8.
Hybrid4 mode selector.
26
The Hybrid4 technology allows two sources of
energy to be associated in an effective manner:
the Diesel HDi engine, which drives the front
wheels and the electric motor, which drives the
rear wheels.
These two motors can operate alternately or
simultaneously, according to the hybrid mode
selected and the driving conditions.
The electric motor alone provides power for
the vehicle in "ZEV" (Zero Emissions Vehicle)
mode, and in "Auto" mode for running at slow
speed and low load. It also assists the Diesel
engine when moving off, accelerating and
changing gear.
The battery that powers the electric motor is
recharged during phases of deceleration and
stores the energy for subsequent use.
9
For economical driving, caring for the environment
The fuel
consumption
of a vehicle
varies greatly
:
- according to the driver's
style of driving
(moderate, aggressive, fast, ...),
- according to the
type of journeys
made (urban, main road, motorway, flowing, heavy traffic, …) and the speed.
Main recommendations for driving economically
Hybrid mode selector
To optimise fuel consumption, use the
Auto
mode
of the selector whenever possible (the mode is activated
automatically when starting) including for urban journeys.
This mode optimises the use of the energy sources (internal combustion engine and/or electric) contrary to other
modes, which are for use in particular cases.
Gear lever
Use the
automatic
mode
A
as much as possible as this optimises gear changes to suit the requirements.
Causes of high consumption and checks
As with any vehicle, limit overloading, wind resistance (windows open above 30 mph (50 km/h), roof bars, loaded or
not, …), the use of power consumers (air conditioning, heated seats, heated rear screen, …).
Observe the recommendations on checks (regular check of tyre pressures, correct tyre pressures, …) and routine
servicing.
Drive smoothly
Stay in the "eco" zone
displayed in the energy consumption / generation indicator: accelerate gently, drive at steady
speeds using the speed limiter or cruise control as soon as possible.
Use the "charge"
zone
Consumption history
See the impact of your style of driving and the type of journey by reviewing the history of your energy consumption.
Familiarisation
Electronic key: Keyless Entry
This system allows you to unlock, lock and
Exterior
Directional lighting
This lighting automatically provides additional
Daytime running lamps
This lighting, switched on automatically when
Automatic headlamp dipping
This system automatically switches between
Front and rear parking sensors
This systems warns you of the presence of
Temporary puncture repair kit
This kit is a complete system consisting of a
Exterior expressive stickers
Do not have your vehicle washed in a
Exterior
Reversing camera
This system, available only with satellite
Familiarisation
Access
Opening the fuel filler flap.
Tank capacity: approximately 60 litres.
Fuel tank
Unlocking
With the electronic key on your person and in
around the vehicle, pass
Locking
With the electronic key in the recognition
A
around the vehicle, press with a finger
Electronic key
A.
Unlocking the vehicle.
Locking the vehicle.
Unlocking the boot and complete unlocking
Keyless Entry and Starting
Boot
Unlocking the boot from inside: maintain
Interior
Head-up display
This system projects speed and cruise control/
Central storage containing
It is illuminated, cooled and provides storage
Audio and communication
These systems benefit from the latest
The settings for some vehicle systems
With
Audio system - Bluetooth
®
Massage function
This system provides a lumbar massage for a
Electric parking brake
It combines the functions of automatic
With
Audio system - Bluetooth
®
.
Familiarisation
Illumination of the indicator lamp indicates the state of the corresponding function.
Switch panels
Opening the fuel filler flap.
Opening the boot.
Deactivation of the alarm.
Electric parking brake activated.
Push button starting/stopping.
Forced operation of the Diesel engine.
Deactivation of parking sensors.
Electric child lock.
Deactivation of the DSC/ASR
Activation for Automatic headlamp
Activation of lane departure warning
Locking/unlocking the passenger
Sitting comfortably
Front seats
Manual
Head restraint height and angle
Backrest angle adjustment.
Seat cushion height adjustment.
Seat forwards-backwards adjustment.
lumbar support adjustment.
Electric
Angle, seat height and seat forwards-
Backrest angle adjustment.
lumbar support adjustment.
Manual cushion adjustment.
Familiarisation
Controls for electric windows / electric child
eMyWay controls.
Gear selector.
Hybrid4 mode selector.
Heating / air conditioning controls.
Audio system.
Hazard warning lamps.
Multifunction screen.
Central adjustable air vents.
Clock.
Starting with the START/STOP button.
Electronic key reader.
Wiper / screenwash / trip computer stalk.
Instruments and controls
Bonnet release lever.
Headlamp height adjustment.
Side adjustable air vents.
Front door window demisting/defrosting
Quarter light demisting windows.
Head-up display.
Windscreen demisting/defrosting vent.
Passenger's airbag.
Glove box / Passenger's airbag
12 V accessory socket.
Rear electric window controls.
Central armrest with storage.
USB port / auxiliary socket.
Electric parking brake.
Audio equipment steering mounted
Driver's airbag.
Horn.
Cruise control / speed limiter controls.
Switch panel (see previous page).
Door mirror adjustment.
Lighting and direction indicator stalk
Instrument panel.
Seat belt and airbag warning lamps.
Courtesy lamp.
Head-up display controls.
Controls for cockpit glass roof blind.
CITROËN Localised Emergency Call -
Familiarisation
Sitting comfortably
Head restraint adjustment
Release the adjustment mechanism.
Adjust for height and reach.
Lock the adjustment mechanism.
Steering wheel adjustment
For reasons of safety, these operations
To lower it, simultaneously press button
A
and
To raise it, guide the head restraint upwards to
To incline it, swivel the lower part backwards or
Sitting comfortably
Door mirrors
Adjustment
Selection of the left or right mirror.
Adjusting the position of the mirror glass.
Deselection of the mirror.
Folding the mirror.
Rear view mirror
Automatic detection of day/night mode.
Rear view mirror adjustment.
Front seat belts
Fastening.
Adjusting for height.
Familiarisation
Seeing clearly
Lighting
Ring A
Ring B
Wipers
Control stalk A: windscreen
Fast wipe.
Normal wipe.
Intermittent wipe.
Park.
AUTO
Automatic wiping.
Single wipe: Brief pull on the stalk towards.
Screenwash: Long pull on stalk towards you.
Switching on "AUTO" mode
Briefly push the stalk downwards.
Switching off "AUTO" mode
Briefly push the stalk downwards or place
Ring B: rear wiper
Lighting off.
Automatic illumination of headlamps.
Sidelamps.
Dipped / main beam headlamps.
Front and rear foglamps.
Park.
Intermittent wipe.
Screenwash.
Monitoring
On switching on, the dial needles go to the
With the ignition on, the bars indicate the
Instrument panel
With the ignition on, the orange and red
With the hybrid system active, these
If a warning lamp remains on, refer to the
Warning lamps
With the ignition on, the instrument panel
If the levels are not correct, top up the level
Familiarisation
Passenger safety
Open the glove box.
Insert the key (integral with the electronic key).
Select position:
(activation), with front passenger or
(deactivation), with "rear facing"
Remove the key keeping the switch in the
Front passenger's airbag
Front seat belts and
A.
Left hand front seat belt not fastened or
Right hand front seat belt not fastened or
Right hand rear seat belt not fastened or
Centre rear seat belt not fastened or
Left hand rear seat belt not fastened or
Front passenger's airbag deactivated
Front passenger's airbag activated warning
Starting - stopping the engine
Driving safely
Before starting
Starting
- The instrument panel and the
lamp
- The dial in the centre console is in
AUTO
mode.
- Place the gear selector in position
- Insert the electronic key in the reader or
- Press the brake pedal.
- Make single short press (about 1 second)
button.
Moving off
- While maintaining pressure on the brake
A
for reverse.
- Take your foot off the brake pedal, you can
Familiarisation
If this warning lamp comes on in
is
. The parking brake must
Before leaving the vehicle, check that
warning lamp in the control lever
If towing a trailer or caravan or if the
A
- to immobilise the
Driving safely
Electric parking brake
Manual Application/Release
of the parking brake is
the control lever
With the ignition on,
of the
and
then
the
A
.
If an audible signal is heard on opening
Do not leave a child alone in the vehicle
Automatic Application / Release
Press the accelerator pedal, the parking brake
With the vehicle stationary, the parking brake
lamp off).
Driving safely
Speed limiter "LIMIT"
Selecting speed limiter mode.
Decrease the programmed value.
Increase the programmed value.
Pause/resume speed limiter.
Display of the memorised speeds (by the
These values must be set with the hybrid
Cruise control "CRUISE"
Selecting cruise control mode.
Programming a speed / Decrease the
Programming a speed / Increase the
Pause/resume cruise control.
Display of the memorised speeds (by the
In order to be programmed or activated, the
gear engaged.
Display in the instrument panel
The cruise control or speed limiter mode
Familiarisation
Hybrid system
Presentation
These two motors can operate alternately or
The electric motor alone provides power for
The battery that powers the electric motor is
Diesel HDi engine (front wheel drive).
Electric motor (rear wheel drive).
200 V battery.
Electronic power supervisor.
Alternator-starter motor (Stop & Start).
Electronic gearbox.
Electrical flow.
Hybrid4 mode selector.
Hybrid system
The
, located at the front,
It is fitted with an
)
which recharges the
The
, located at the
It recovers energy and charges the batteries
A 200 V NI-MH
,
Its charging rate is managed automatically by
It is located in a compartment in the boot,
The battery
is indicated by
The
, located under the
The
An inverter and a transformer are needed to
The inverter acts on the torque of the electric
The transformer converts the 200 V of the
The
assures
function which allows the
The stopping and restarting of the Diesel
It also provides additional charging of the
The
provides, in
It also offers improved driving pleasure with
Before starting
- Place the gear selector lever in position
- If your vehicle has Keyless Entry and
- If not, place the electronic key in the
- Press the brake pedal.
- Make a single short press (about a second)
button.
- The steering column locks (noticeable
- Keep your foot on the brake pedal until the
lamp come on,
Starting the Hybrid4 system
Starting - switching off the engine
The hybrid system determines whether it is
Hybrid system
Switching off the Hybrid4
- Before switching off the Hybrid4 system,
.
- Make a short press on the
- The system shuts down and the steering
For more information, see the section
When stationary, switch off the ignition
lamp is off
Hybrid system
Electronic engine immobiliser
The keys contain an electronic chip which has
This electronic engine immobiliser locks the
In the event of a malfunction, you are informed
In this case, your vehicle does not start; contact
With the electronic key in the reader or the
, allows the
Press the "START/STOP" button,
Press the button again to switch
With the ignition on, the system goes
Ignition on without
starting
Anti-theft protection
When the electronic key is in the defined zone
Insert the electronic key in the reader.
Press the brake pedal.
Press the "START/STOP" button.
The hybrid system is active.
Back-up switch-off
In the event of an emergency only, the engine
In this case the steering column locks as soon
If the electronic key is no longer in the defined
Press and hold the "START/STOP" button
The electronic key must always remain inside
Hybrid system
The selector allows the user to choose between 4 drive modes for the vehicle.
Turn the dial to the right or left; the mode selected is confirmed by illumination of the corresponding
mode, to force electric running.
mode, to make use of the maximum
mode, to force the vehicle into 4x4 mode.
AUTO
mode, for normal use and optimised fuel
On starting the vehicle: with the gear selector
, press the brake pedal and press
This lamp comes on when the vehicle is ready
This lamp comes on more or less instantly but
With the vehicle stationary, press the
lamp is off when leaving the
For more information, refer to the section
Ready lamp
Hybrid4 mode selector
ZEV mode *
Zero emissions vehicle operation is assured
This mode
at moderate
It can be activated when the
Auto mode
It automatically manages the operation of the
.
In particular, this mode activates
when the
In auto mode, the
- can drive the vehicle on its own up to
when
),
- is no longer active above 70 mph
* ZEV: Zero Emissions Vehicle.
This
mode to use in
is activated
Hybrid system
Sport mode
4WD mode **
This mode allows more dynamic driving by
.
Vehicle acceleration and pick-up are
This mode manages the progressiveness of the
In Sport mode:
- The electric motor can be used up to
This mode provides
*** at
Their coupling is managed electronically to
In 4WD mode:
- Power for the electric motor is provided,
- The additional traction from the electric
In ZEV mode:
- Range and acceleration capacity are
- Under high load or a priority requirement
If the conditions do not allow this
This mode should be used on snow covered
In this mode, in severe conditions and if the
The addition of 4WD traction is available
- the state of charge of the traction
- the altitude.
For more information on "Automatic
** 4WD: 4 Wheel Drive.
*** This mode will be even more effective if
Energy consumption / generation indicator
The indicator dial provides real time information
It comprises three main zones.
Zone which indicates that the vehicle
, electric,
This zone corresponds to phases of electric
Zone which indicates that the vehicle is
phase: on
This allows the high voltage battery to be
which can then
for future energy requirements.
ECO zone
CHARGE zone
Hybrid system
Zone which indicates an increased cumulative
from your hybrid vehicle,
POWER zone
View hybrid fl ow information
Hybrid modes
Hybrid mode selected (AUTO, ZEV, SPORT, 4WD).
Messages, e.g.: "Zero Emission" if the Diesel engine is off
Operation / Energy flows
The Diesel engine supplies the battery (if needed).
Arrow from left to right: the battery powers the electric motor (when
Arrow from right to left: the electric motor/generator recharges the
The Diesel engine drives the front wheels.
The electric motor drives the rear wheels.
Vehicle infrastructure
Diesel engine.
Traction battery state of charge.
Electric Motor/Generator.
Information on the active hybrid mode, arrows for energy flows and the state of charge of the battery, is displayed in the instrument panel screen or the
Hybrid system
Examples of displays
On starting and when stationary
There is no flow of energy (the Stop & Start system stops and
Energy recovery
During this phase (deceleration, braking, foot off the
You can maximise this energy recovery by taking your foot off
100% electric
In all electric running (AUTO or ZEV modes), only the electric
The display of "Zero Emission" indicates that the Diesel engine
Automatic restarting of the Diesel engine or ZEV mode NOT available
Maintaining the performance
- When the vehicle exceeds 18 mph
- If the high voltage battery is not
- When the fuel level enters the reserve
- During regeneration of the particle
The internal combustion engine may restart or
The internal combustion engine can be
When the conditions described below cause
Your vehicle is fitted with the most effective
At regular intervals your Diesel engine will
During this PEF regeneration phase, electric
".
Action by the driver
- Moving the gear selector to position
- Action on steering mounted control
- Sustained and sharp acceleration.
- Use of demisting.
- Use of air conditioning.
Diffi cult weather conditions and
- If certain conditions or engine temperature
- When the battery is close to maximum
just to provide engine braking.
- If the vehicle encounters a steep slope
- If the vehicle has been parked in the sun
- When driving in mountainous conditions
Hybrid4 frequently asked questions
ZEV (Zero Emissions Vehicle) mode
Answer
Why is it not always possible for me to put the
This situation is temporary.
Certain conditions will occasionally prevent the change to ZEV mode, even if the battery has
Why do I sometimes see an alert message
This is an message relating to the regeneration of the particle emissions filter (PEF). This is a
This process is not generally noticed by the driver.
On the other hand, in the case of a hybrid, this phenomenon may be noticeable (in urban use)
Why is it not possible for me to put the vehicle
The management of ZEV is different from Auto mode.
Changing to ZEV mode is only possible with a battery charge of at least 4 bars, in order to assure
In Auto mode, the system alone manages the conditions for changing temporarily to electric
Why is the range in ZEV (Zero Emissions
The vehicle needs more energy when climbing than when running on the level.
So it is better to stay in Auto mode, which will favour operation of the Diesel engine.
Why is it that the system makes me come out of
It is not intended to give preference to ZEV running at any cost, as it is not always the most
So the system returns automatically to Auto mode.
Hybrid system
Reducing consumption - Fuel
Answer
How can I optimise my fuel consumption?
Give preference to Auto mode as it selects in the best way the "driving energy source" to use in
You should also adapt your driving style to the characteristics of hybrid vehicles to get the best
Why do I not manage to reduce my fuel
It is not ZEV mode but Auto mode that is the most appropriate for reducing fuel consumption, as it
ZEV mode (100% electric operation) can reduce fuel consumption in some cases. However,
This is why we recommend using Auto mode more often.
Why does the trip computer sometimes display
The current fuel consumption displayed may appear high when the distance covered is very low,
In town, your hybrid retains very good fuel economy (of the order of 35% better than a non-hybrid
Why is my battery rarely fully charged?
A partly charged battery is normal operation (4 to 5 bars on average in Auto mode).
This allows some capacity to be left free for the recovery for energy when going downhill or taking
Why are there so may fuel alert messages when
To encourage you to refuel as soon as possible and avoid the loss of hybrid functions.
Hybrid system
Air conditioning
Answer
It seems to me that the vehicle runs less on
The demand for heating or air conditioning may require the starting of the Diesel engine until the
Normal hybrid operation is simply put back. The period can be longer under low or very high
It seems to me that when it is very hot and the
When it is hot, the periods when the Diesel engine is put on standby and the vehicle runs on
In very hot weather, it is always possible to press the Eco OFF button (which brings the vehicle
Special Hybrid4 features
Answer
Can I tow with my hybrid vehicle and how much?
A Hybrid4 vehicle can tow between 500 kg and 800 kg (see the "Towing" section).
This allows a jet ski or two-wheeler on a trailer to be towed, for example.
The "technical" reason for the limit is related to maintaining adequate cooling capacity for the
Why does engine braking seem so strong?
When you take your foot off the accelerator, the engine braking results mainly from the energy
This leads to a higher level of deceleration than a conventional vehicle and so allows the recovery
ECO OFF switch
This function prevents the Diesel engine
On pressing the switch, the engine restarts
To return to normal operation, press the switch
After switching off the ignition, the vehicle will
* Except in ZEV mode, which favours electric
During electric running and when the engine is
However, variations in temperature may still
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO
emissions.
Eco-driving suited to your
Use gear selector position
A
, as this
AUTO
mode of the
When moving off, accelerate normally up to
zone between 20
At steady speeds, drive gently with small
or
zone), run in electric mode as often
Anticipate the need to slow down and use
zone), so as to
Before moving off, if the passenger
Above 30 mph (50 km/h), close the windows
Remember to make use of equipment
Switch off the air conditioning, unless it has
Switch off the demisting and defrosting
Switch off the heated seat as soon as
Switch off the headlamps and front foglamps
Avoid running the Diesel engine when
As a passenger, if you avoid connecting
Disconnect your portable devices before
Control the use of your electrical equipment
Hybrid system
Observe the recommendations
Check the tyre pressures regularly, when
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Have your vehicle serviced regularly (engine
When refuelling, do not continue after the
cut-off of the nozzle to avoid any overflow.
At the wheel of your new vehicle, it is only after
At the end of winter, remove snow tyres and
Spread loads throughout the vehicle; place
Limit the loads carried in the vehicle and
Remove roof bars and roof racks after use.
Limit the causes of excess
Consumption of your hybrid in the screen
Average consumption over the last 5 minutes.
"60 % Hybrid Use" corresponds to 60 % of the cumulative
For more information on the trip computer, refer to
With the hybrid system active, when trip 2 displayed, press
Hybrid system
200 V high voltage battery
The 200 V high voltage battery cannot be
The battery is Ni-MH (Nickel Metal Hydride)
Charging
The battery is charged when the vehicle
The battery is not recharged from a mains
The battery may also be charged automatically
This recovery allows the use of "free" energy.
The battery charging time is very short and is
A discharged battery (following ZEV running
The
.
The energy recovery can be faster during
The average state of charge is 4 to 5 bars, so
To preserve the service life of the
Where the battery is close to maximum,
This system does not work continuously,
Its operation can be heard at the rear, even if
If the air intake is blocked, the battery may
Fan cooling of the high voltage battery
For the best use of the high voltage
- do not obstruct the air intake with
- do not spill fluids, as this may cause
The high voltage battery has an air
Hybrid system
The high voltage battery must not in any
There is the risk of serious burns, as well as
A used Ni-MH (Nickel Metal Hydride) type
The voltage used for the operation of the
Be sure to take account of the warning labels
Take great care regarding the high voltage and
Emergency cut-off
In the event of an accident, a cut-off system
To restart the hybrid system, contact a
High voltage cables are routed under the
Before doing any work on
lamp off).
Battery precautions
High voltage cables
Take care to position lifting equipment
Never touch, dismantle, remove or
Underbonnet precautions / warnings
The alternator-starter motor of your hybrid
Always ensure that the
lamp off) before
Before doing anything under the
lamp in the dashboard
Also ensure that the ignition is switched
Hybrid system
Car washing machine or tunnel
Some car washing machines or tunnels (where the vehicle is moved forwards on a travelling track) require that the parking brake be "released" during
With the hybrid system active,
lamp on, parking brake
- Place the gear selector in position
.
- Switch off the engine (press on START/STOP). The parking
lamp goes off in
- Switch on the ignition again (press on START/STOP) without
lamp remains off.
- Release the parking brake using the manual control on the
- Switch off the ignition (press on START/STOP without your
If the Diesel engine is not running, it restarts.
If the Diesel engine is running, it remains running without time
With the hybrid system active,
lamp on, parking brake
- Place the gear selector in position
(Auto or Sport mode).
- Press the brake pedal then the ECO OFF button.
Car washing machines or tunnels in which the
Car washing machines or tunnels in which the
Recovery of the vehicle on a fl at-bed
Never recover the vehicle by towing it with the wheels on the ground (neither the front wheels, nor
Before doing any work, with the ignition on, press the brake pedal and place the gear selector in
, then switch off the hybrid system (
lamp off).
Always call on a professional for the recovery of your vehicle on a flat-bed lorry or trailer.
Use the towing eyes
to lash the vehicle
Hybrid system
Instruments and controls
Instrument panel
Energy consumption / generation indicator
For more information refer to the "Hybrid
Fuel gauge.
Engine coolant temperature gauge.
Speedometer (mph or km/h).
Cruise control or speed limiter
Main lighting and controls dimmer.
- Successive short presses: under-inflation
- Long press: reset the function selected to
Gear engaged.
Instrument panel screen: electrical flow,
Digital speedometer (mph or km/h).
Ready lamp: indicates that the vehicle is
Dials and screens
Control buttons
Monitoring
When the engine is started, these same
If they remain on, before moving off, refer to the
Associated warnings
The switching on of certain warning lamps may
The warning lamps may come on continuously
Certain warning lamps may come on in
Only by relating the type of illumination
Refer to the tables on the following
Visual indicators informing the driver that a
When the ignition is switched on
Certain warning lamps come on for a few
Action / Observations
flashing with buzzer.
The lighting stalk is pushed down.
flashing with buzzer.
The lighting stalk is pushed up.
fixed.
The lighting stalk is in the
fixed.
The lighting stalk is in the "Dipped
fixed.
The lighting stalk is pulled towards
Pull the stalk to return to dipped beam headlamps.
fixed.
The front foglamps are switched on.
Turn the ring on the stalk rearwards twice to switch off
For more information on the lighting controls, refer to the corresponding section.
Automatic
fixed.
The lighting stalk has been pulled
Its warning lamp is on.
The camera, located in the interior rear view mirror,
Pull the lighting stalk to return to dipped beam.
fixed.
The vehicle is ready to move off; you
It comes on once high voltage is established in the
If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.
Monitoring
fixed.
The rear foglamps are switched on.
Turn the ring on the stalk rearwards to switch off the
Action / Observations
fixed.
The
switch has been
Wait until the warning lamp goes off before starting.
Once it goes off, starting is immediate, on condition
The period of illumination of the warning lamp is
If the engine does not start, switch the ignition off and
fixed.
The electric parking brake is applied.
Release the electric parking brake to switch off the
Observe the safety recommendations.
For more information on the electric parking brake,
fixed.
The "automatic application" (on
Activate the function (according to country) via the
For more information on the electric parking brake,
Action / Observations
Automatic
fixed.
The wiper control is pushed
Automatic front wiping is activated.
To deactivate automatic wiping, operate the control
fixed in the seat belt
The control switch, located in the
position.
Move the control switch to the
position to
fixed.
The brake pedal is not pressed.
Press the brake pedal to start the hybrid system
).
If you wish to release the parking brake without
flashing.
If you hold the vehicle on a rising
Use the brake pedal and/or the electric parking brake.
Monitoring
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
Action / Observations
fixed in the instrument
The control switch, located in the
position.
The passenger's front airbag is
Set the control to the
position to activate the
With the hybrid system active or when the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the instrument panel screen.
If you encounter any problems, contact a CITROËN dealer or a qualified workshop.
Action / Observations
fixed, associated
Illumination of this warning lamp is
Stop as soon as it is safe to do so as the engine may
Park, switch off the ignition and call a CITROËN
Monitoring
on temporarily.
A minor fault has occurred for which
Identify the fault by reading the message shown in the
- opening of the doors, boot or bonnet,
- engine oil low level,
- screenwash low level,
- flat remote control battery,
- saturation of the particle emission filter (Diesel)
As soon as the traffic conditions permit,
- a fault with the tyre under-inflation detection
- ...
For any other faults, contact a CITROËN dealer or a
fixed.
A major fault has occurred for which
Identify the fault by reading the message shown
fixed, associated with the
The servicing interval has been
Only on Blue HDi Diesel versions.
Your vehicle must be serviced as soon as possible.
Action / Observations
Action / Observations
flashing.
The electric parking brake is not
The application/release is faulty.
You must stop as soon as it is safe to do so.
Park on flat level ground, engage a gear (or place the
for an automatic gearbox), switch
fixed.
The electric parking brake has a fault.
Contact a CITROËN dealer or a qualified workshop
For more information on the electric parking brake,
fixed.
The "automatic application" (on
Activate the function (according to country) via the
For more information on the electric parking brake,
Monitoring
Action / Observations
flashing.
The DSC/ASR regulation is
The system optimises traction and improves the
fixed.
The DSC/ASR system has a fault.
Have it checked by a CITROËN dealer or a qualified
flashing.
The engine management system has
Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or a qualified
fixed.
The emission control system has a
The warning lamp should go off when the engine is started.
If it does not go off, contact a CITROËN dealer or qualified
Anti-lock
fixed.
The anti-lock braking system has a
The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a
fixed.
The braking system fluid level has
You must stop as soon as it is safe to do so.
Top up with brake fluid listed by CITROËN.
If the problem persists, have the system checked by a
+
fixed, associated
The electronic brake force distribution
You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified
fixed with the two
When it first comes on there remains
in the
You must refuel as soon as possible to avoid running
This audible signal and message are repeated with
Fuel tank capacity: approximately 60 litres.
Never continue to drive until you run out of fuel as
Action / Observations
fixed.
The pressure in one or more wheels
Check the pressure of the tyres as soon as possible.
flashing then fixed,
The tyre pressure monitoring system
Under-inflation detection is not assured.
Have the system checked by a CITROËN dealer or a
Monitoring
Airbags
on temporarily.
This lamp comes on for a few
This lamp should go off when the engine is started.
If it does not go off, contact a CITROËN dealer or a
fixed.
One of the airbag or seat belt
Have it checked by a CITROËN dealer or a qualified
flashing.
The directional headlamps system
Have it checked by a CITROËN dealer or a qualified
fixed
A seat belt has not been fastened or
Pull the strap then insert the tongue in the buckle.
Action / Observations
With the hybrid system active:
- in zone
A
, the temperature is correct,
- in zone
, the temperature is too high; the
warning lamp comes on,
You must stop as soon as it is safe to do so.
Wait a few minutes before switching off the
Contact a CITROËN dealer or a qualified
After driving for a few minutes, the temperature
To top up the level:
wait for the engine to cool,
unscrew the cap by two turns to allow the
when the pressure has dropped, remove
top up the level to the "MAX" mark.
Be aware of the risk of burns when
Monitoring
More than 1 800 miles (3 000 km)
When the ignition is switched on, no service
System which informs the driver when the
The point at which the service is due is
- the distance travelled,
- the time elapsed since the last service.
Between 600 miles (1 000 km)
For 5 seconds after the ignition is switched on, the
1 700 miles (2 800 km) remain before
For 5 seconds after the ignition is switched on, the
5 seconds after the ignition is switched on,
Less than 600 miles (1 000 km)
560 miles (900 km) remain before
For 5 seconds after the ignition is switched on,
5 seconds after the ignition is switched on,
to
Illumination of the key is accompanied
Service overdue
Every time the ignition is switched on, an
warning lamp.
The distance remaining may be
Therefore, the spanner may also come
.
Following this operation, if you wish to
5 seconds after the ignition is switched on,
.
After each service, the service indicator must
The procedure for resetting to zero is as
switch off the ignition,
press and hold the trip distance recorder
switch on the ignition; the distance recorder
when the display indicates
, release
Retrieving the service
You can access the service information at
Press the trip distance recorder zero reset
Monitoring
Lack of oil
This is indicated by the flashing of
or
If the lack of oil is confirmed by a check using
Refer to the "Checking levels" section.
Indicator fault
This is indicated by the flashing of
or
In the event of a fault with the electric gauge,
If the system is faulty, you should check the
Refer to the "Checking levels" section.
This information is displayed for a few seconds
The check of this level is only valid if the
Oil level correct
System for manual adjustment of the
Activation
When the lighting is on:
press the button to change the brightness
when the level of brightness required is
Deactivation
When the lighting is off, or in day mode on
The total and trip distances are displayed for thirty seconds when the ignition is switched off, when
Total distance recorder
System which measures the total distance
To conform to legislation in the country
Trip distance recorder
System which measures a distance travelled
With the ignition on, press the button until
Monitoring
System allowing certain screens to be switched
The instrument panel remains on with the
If there is an alert or a change in a function
For more information, refer to the
The analogue clock does not have an
To set the time, refer to the section relating to
The clock is synchronised with the screen time;
Setting the date and time
Audio system / Bluetooth
Press
Using the arrows, select "
" and confirm.
Using the arrows, select "
" and confirm.
Using the arrows, select "
" and confirm.
Select the setting to be modified. Confirm
, then make the change and
Adjust the settings one by one, confirming by
button. Next select the "
" menu.
Monitoring
Press
to display the "
"
Select "
" and confirm.
Select "
" and confirm.
Select "
" so that setting the minutes is done
Adjust the settings one by one.
Then select "
" on the screen and confirm to
" menu and every time the
Select the setting to adjust.
Confirm by pressing
, then adjust the setting
Trip computer
System that gives you information on the current journey (range, fuel consumption…).
When the trip required is displayed, press
Information display
Press the button on the end of the
to display the various tabs in
- The current information tab with:
● t h e r a n g e ,
● the current fuel consumption.
- Trip
with:
● the average speed,
for the first trip.
● the average fuel consumption.
- Trip
with:
● the average speed,
for the second trip.
● the consumption history
● the average fuel consumption.
Reset trip
- Radio or media.
- Satellite navigation.
Monitoring
If dashes are displayed continuously
This value may vary following a change
Range
(miles or km)
This indicates the distance
When the range falls below 20 miles (30 km),
This function is only displayed from
Current fuel consumption
(mpg or l/100 km or km/l)
This is the average fuel consumption
Average fuel
(mpg or l/100 km or km/l)
This is the average fuel
Average speed
(mph or km/h)
This is the average speed calculated
Reset history
With trip 2 displayed, press the button (on
Trip s
and
are independent but their use
For example, trip
can be used for daily
for monthly figures.
Access
Electronic key
Unlocking the vehicle
Complete unlocking
Selective unlocking
System which permits central unlocking or
This setting is done in the
Complete unlocking is activated by
Unlocking is confirmed by rapid flashing
At the same time, depending on
To unlock only the driver's door,
Press the open padlock to unlock
To unlock the other doors and the boot,
remote control
Access
Locking the vehicle
Locking is confirmed by fixed
The door mirrors fold at the same time.
Press the closed padlock to lock
Hold the button down until the
Press this button until you hear
Be aware of children when operating
When the vehicle is locked, if it is
If the alarm was previously activated, it
"Keyless Entry and Starting" system
System that allows the opening, closing
Accumulations (water, dust, grime, salt...) on
If cleaning the inner surface of the door handle
A sudden splash of water (stream of water, high
It can also be used as a remote control;
For reasons of safety and theft
It is recommended that you keep it on
Access
Unlocking the vehicle
Complete unlocking
With the electronic key on your person
A
, pass your
Your passengers can also open their
Selective unlocking
This setting is done via the
By default, complete unlocking is
To unlock only the drivers door, with the
To unlock the complete vehicle, pass your
Unlocking is confirmed by rapid
The door mirrors unfold at the same
If the alarm is on, the audible warning
Locking the vehicle
With the electronic key in the recognition
A
, press with a finger on one of the
Maintain pressure with your finger until the
Locking is confirmed by fixed
The door mirrors fold at the same time.
When the vehicle is locked, if it is
If the alarm was previously activated, it
The folding and unfolding of the door
As a safety measure (children on
Guard against theft when the key for the
In order to preserve the charge of the
Ensure that no one prevents the correct
Be aware of children when operating
This function allows you to identify your vehicle
Press the closed padlock on the
This will switch on the courtesy lamps and
Access
Deadlocking renders the exterior and
It also deactivates the manual central
Therefore, never leave anyone inside
Using the remote control
Press the closed padlock to lock
Maintain pressure with your
With the Keyless Entry and
By the doors:
With the electronic key in the recognition
, press a finger on the door handle
Within five seconds, press the door handle
Ensure that no one is preventing the
Be aware of children when operating
Press the closed padlock again within
Back-up mechanical key
Unlocking/locking using the integral key
The integral key is used to lock and unlock the
- cell battery flat, vehicle battery discharged
- vehicle located in an area with strong
Maintain a pull on button
, to extract the
Turn the key towards the front of the
Normal locking
Turn the key towards the rear of the vehicle
Deadlocking
Turn the key towards the rear in the driver's
Turn the key towards the rear again within
If the alarm is activated, the audible signal on
Access
Take them to an approved collection
Battery ref.: CR2032 / 3 volts.
This replacement battery is available from a
A message appears in the instrument panel
Unclip the cover using a small screwdriver
Lift off the cover.
Remove the flat battery from its location.
Fit the new battery into its location
Clip the cover onto the casing.
Following disconnection of the vehicle battery,
Place the mechanical key (integral with the
Place the electronic key in the reader.
Switch on the ignition by pressing START/
The electronic key is fully operational again.
If the problem persists, contact a CITROËN
Visit a CITROËN dealer with the vehicle's registration document and your personal identification documents and if possible the key code label.
The CITROËN dealer will be able to retrieve the key code and the transponder code required to order a new key.
Electronic key
The electronic key is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without
Do not repeatedly press the buttons of your electronic key out of range and out of sight of your vehicle. You run the risk of stopping it from
The electronic key cannot operate as a remote control when it is in the reader or even when the ignition is switched on.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
As a safety precaution, never leave children alone in the vehicle, even for a very short time.
In all cases, take the remote control or electronic key (if Keyless Entry and Starting) with you when leaving the vehicle.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
Don't forget to turn the steering to engage the steering lock.
When purchasing a second-hand vehicle
Have all of the keys in your possession paired by a CITROËN dealer, to ensure that only your keys allow your vehicle to be unlocked
Central locking control
Automatic central locking
The doors and boot can lock automatically
To activate or deactivate this function (activated
If the vehicle is deadlocked or locked
If one of the doors is open, central
Driving with the doors locked may make
System allowing the doors to be locked and
Operate the button.
This allows the doors and the boot to be locked
Operate this button until a
If you want to drive with the boot open,
Locking the driver's door
Insert the key in the door lock, then turn it
You can also apply the procedure described for
Unlocking the driver's door
Insert the key in the door lock, then turn it
Access
Locking the front and rear
Open the doors.
On the rear doors, check that the child lock
Remove the black cap, located on the edge
Insert the key in the socket without forcing
Remove the key and refit the cap.
Close the doors and check that the vehicle
Unlocking the front and rear
Pull the interior door opening control.
Boot
After unlocking the boot or the vehicle
Opening from outside
Press this button until the boot is heard to
System allowing the mechanical unlocking
If the tailgate is not closed correctly, with
or the
(speed above 6 mph (10 km/h)), a
Locking after closing
If the fault persists after closing again, the boot
Unlocking
Fold back the rear seats to gain access to
Insert a small screwdriver into hole
of the
Move the latch to the left.
Closing
Lower the tailgate using the interior grab
Opening from inside
Access
System which protects and provides a deterrent
Alarm
- Exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
- Interior volumetric
The system checks for any variation in the
The alarm is triggered if anyone breaks a
- Tilt
The system checks for any change in the
The alarm is triggered if the vehicle is lifted,
Self-protection function
The system checks for the putting out of
The alarm is triggered if the battery, the
For all work on the alarm system,
Locking the vehicle with full
Activation
Press the locking button on the
The monitoring system is active: the indicator
After the locking button on the remote control
If an opening (door, boot...) is not closed
Press the unlocking button on
Deactivation of the volumetric
The volumetric protection system is
OFF
OFF
Where the vehicle locks itself again
To reactivate it, the vehicle must be
Locking the vehicle
Deactivation of the interior
Switch of the ignition and within
Get out of the vehicle.
Press the locking button on
The exterior perimeter monitoring alone is
To be effective, this deactivation must
Deactivate the interior volumetric and anti-lift
- leaving a window partially open,
- washing your vehicle,
- changing a wheel,
- having your vehicle towed,
- transportation by sea.
Access
OFF
Reactivation of the interior
Triggering of the alarm
The monitoring functions remain active until
Press the unlocking button on
Press the locking button on the
The indicator lamp in the button
When the vehicle is unlocked using
Failure of the remote control
To deactivate the monitoring functions:
Unlock the vehicle using the key (integral with
Open the door; the alarm is triggered.
Switch on the ignition; the alarm stops. The
Locking the vehicle without
Lock or deadlock the vehicle using the key
Operating fault
When the ignition is switched on, fixed
Have it checked by a CITROËN dealer or a
* According to country.
Automatic activation *
2 minutes after the last door or the boot is
To avoid triggering the alarm on entering
OFF
Electric windows
To open or close the window, press or pull the
Automatic operation
To open or close the window, press or pull
The electric window switches remain
Once this time has elapsed, the electric
Access
Safety anti-pinch
When the window rises and meets an obstacle,
In the event of unwanted opening of the
The safety anti-pinch function is not active
Deactivating the rear window
Reinitialisation of the
In the event of contact during operation
When operating the passenger electric
The driver must ensure that the
Be aware of children when operating
Be aware of passengers or other
Following reconnection of the battery, the
- lower the window completely, then raise
- continue to press the switch for at least
For the safety of your children, press
to prevent operation of the
The warning lamp in the button comes on,
The interior controls for the rear doors are also
Opening the doors from the outside and
Loading...