Citizen AN0 Series, 0540, 0560, 051 Series, 051C Series Instruction Manual
Model No. AN0＊＊＊ / Cal. No. 051＊,0540,0560
● INSTRUCTION MANUAL
● BETRIEBSANLEITUNG
● MANUEL D’INSTRUCTIONS
● MANUAL DE INSTRUCCIONES
● MANUALE DI FUNZIONAMENTO
● MANUAL DE INSTRUÇÕES
● 説明書
●
CTZ-B6746
1
Thank you for your purchase of this Citizen watch.
Before using the watch, please read this instruction manual carefully to
ensure correct use.
After reading the manual, store it in a safe place for future reference.
■ Before using the watch
This instruction manual explains the usage of calibers 051*, 051C, 0540 and
0560. Confi rm your watch’s caliber No. following the instruction below.
To check the movement number
A case number is engraved on the case back.
(Figure on the right)
The first 4 digits of the case number represent
the movement number of the watch.
In the example on the right, “1234” is the
movement number.
Engraving position example
1
2
3
4
-
5
6
7
8
9
0
1234-567890
The engraving position may differ
depending on watch model.
2
CONTENTS
■ Before using the watch ..............1
■ Main components
Caliber 051* ..................................3
Caliber 051C .................................4
Caliber 0540 ..................................5
Caliber 0560 ..................................6
■ Setting the watch
Caliber 051*/051C .........................7
Caliber 0540 ..................................8
Caliber 0560 ..................................9
■ Setting the date
Caliber 051*/051C/0540/0560 .....10
■ Chronograph operation
Caliber 051* ................................11
Caliber 051C ...............................12
Caliber 0540 ................................13
Caliber 0560 ................................14
■ Adjusting the chronograph
Caliber 051*/051C/0540 ..............16
Caliber 0560 ................................18
■ Precautions ...............................20
■ Maintenance .............................26
■ Battery handling ......................27
■ Information ............................... 28
■ Tachymeter ................................29
■ Specifi cations ...........................30
3
■ Main Components
Chronograph
second hand
051*
Chronograph minute
hand
Crown
Hour hand
Chronograph hour
hand
Small second hand
Minute hand
Button B
Button A
4
Chronograph
second hand
051C
Chronograph minute
hand
Crown
Hour hand
Chronograph hour
hand
Small second hand
Minute hand
Button B
Button A
5
Chronograph
second hand
0540
Chronograph minute
hand
Crown
Hour hand
Small second hand
Minute hand
Button B
Button A
24 hour hand
6
The Chronograph 1/20 second hand functions as one step movement to confi rm
normal watch operation when the chronograph is not being used.
When stopped, this hand can be re-started by pressing button A.
Chronograph
second hand
0560
Chronograph minute
hand
Crown
Hour hand
Chronograph hour
hand
Chronograph 1/20
second hand
Minute hand
Button B
Button A
7
1. Pull the crown out to position (2) to stop the small second hand at “0” sec.
2. Turn the crown to set the minute/hour hands to the desired time.
* The date changes at 12:00 AM each day. Pay attention to AM and PM when
setting the time.
3. Push the crown in to position (0) to start the hands again.
* To stop the movement and reduce the power consumption, pull the crown
out to position (2).
■ Setting the watch
051*
Crown
Hour hand
Small second hand
Minute hand
051C
8
1. Pull the crown out to position (2) to stop the small second hand at “0” sec.
2. Turn the crown to set the minute/hour hands to the desired time.
* The 24-hour hand is synchronized with the hour hand.
Use the 24-hour time display as a reference to confi rm a.m. and p.m. setting.
3. Push the crown in to position (0) to start the hands again.
* To stop the movement and reduce the power consumption, pull the crown
out to position (2).
0540
Crown
Hour hand
Small second hand
Minute hand
24-hour hand
9
1. Pull the crown out to position (2).
2. Turn the crown to set the minute/hour hands to the desired time.
* The date changes at 12:00 AM each day. Pay attention to AM and PM when
setting the time.
3. Push the crown in to position (0) to start the hands again.
* To stop the movement and reduce the power consumption, pull the crown
out to position (2).
0560
Crown
Hour hand
Minute hand
Loading...