Cisco Systems SD2008 User Manual

Quick Start Guide

Product Overview

Side Panel

The power port and security slot are located on the side panels of the Switch.

Typical Installation Scenario

Cisco Small Business Model SD2008 8-Port 10/100/1000 Gigabit Switch

Package Contents

• SD2008 Gigabit Switch

Thank you for choosing the Cisco 8-Port 10/100/1000 Gigabit Switch. The Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 Mbps network clients.

Front Panel

The Port Status and System Status LEDs are located on the front panel of the Switch.

System—(Green) This LED lights up and remains lit when the Switch is powered on.

Ports 1-8—(Green) Each LED lights up when a connection is made through its corresponding port. It flashes when the corresponding port is active.

Back Panel

The Ethernet network ports are located on the back panel of the Switch. All ports are auto-negotiating and have automatic MDI/MDI-X crossover detection.

The power port is where you will connect the power adapter.

The security slot is where you can attach a lock to protect the Switch from theft.

Placement Options

Set the Switch on its four rubber feet, or mount the Switch on a wall.

The Switch offers two wall-mount slots, which are the two crisscross slots on the bottom panel. The measurement between the two slots is 2.52 inches (64 mm).

To use the wall-mount option, follow these instructions:

STEP 1 Attach two screws to the wall, 2.52 inches (64 mm) apart, so that the

Switch’s wall-mount slots can line up with the two screws.

TEP 2 Maneuver the Switch to insert the screws into the two slots.

The application diagram shown here is an example of a typical network configuration.

When you connect your network devices, make sure you don’t exceed the maximum cabling distances, which are listed in the following table:

From To Maximum Distance

Switch Switch 100 meters (328 feet)

Switch Computer 100 meters (328 feet)

NOTE Use Category 5e Ethernet network cables for your Gigabit

connections.

• Power Adapter

• Quick Start Guide

1-8—These ports connect the Switch to network devices, such as computers.

Americas Headquarters

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Installation

Perform the steps in this section to install the hardware.

STEP 1 Make sure all of the devices you will connect to the Switch are

powered off.

TEP 2 Connect a Category 5 Ethernet network cable to one of the numbered

ports on the Switch. Connect the other end to a computer or other network device.

NOTE Use Category 5e Ethernet network cables for your Gigabit

connections.

STEP 3 Repeat step 2 to connect additional devices.

TEP 4 Connect the supplied power adapter to the power port on the Switch’s

back panel. Plug the other end of the adapter into an electrical outlet.

CAUTION Make sure you use the power adapter included with the

Switch. Using a different power adapter may damage the Switch.

TEP 5 Power on the devices connected to the Switch. Each active port’s

corresponding LED will light up on the Switch.

Congratulations! The installation of the 10/100/1000 Gigabit Switch is complete!

Specifications

The following table lists the specifications for the SD2008 10/100/1000 Gigabit Ethernet Switch.

Item Specification

Model SD20008

Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab

Ports 8 RJ-45 10/100/1000 Mbps ports

Cabling Type Cat5e

LEDs System, 1 through 8

Security Feature Security Slot

Dimensions WxHxD

5.12" x 1.18" x 5.00"

130 x 30 x 127 mm

Unit Weight 0.94 lbs (0.425 kg

Power DC12V/1A

Certification FCC Class B, CE

Operating Temperature 32 to 104ºF (0 to 40ºC)

Storage Temperature -40 to 158ºF (-40 to 70ºC)

Operating Humidity 20 to 95%, noncondensing

Storage Humidity 5 to 90%, noncondensing

Where to Go From Here

Resource Location

Customer Support www.cisco.com/go/smallbiz

End User License Agreement www.cisco.com/go/smallbiz

Regulatory Compliance and Safety Information

Warranty Information www.cisco.com/go/smallbiz

Cisco Partner Central site for Small Business

www.cisco.com/go/smallbiz

http://www.cisco.com/web/partners/ sell/smb/

Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)

Printed in the USA on recycled paper containing 10% postconsumer waste.

78-18820-01