Cirrus Logic CS4299 User Manual

Copyright © Cirrus Logic, Inc. 2006
(All Rights Reserved)
Preliminary Product Information
This document contains information for a new product. Cirrus Logic reserves the right to modify this product without notice.
http://www.cirrus.com
CrystalClear® SoundFusion™ Audio Codec ‘97
CS4299
March '06
DS319PP6
CrystalClear SoundFusion Audio Codec 97
Features
l AC ’97 2.1 Compatible
l Industry Leading Mixed Signal Technology
l 20-bit Stereo Digital-to-Analog Converters
l 18-bit Stereo Analog-to-Digital Converters
l Sample Rate Converters
l Four Analog Line-level Stereo Inputs for
LINE_IN, CD, VIDEO, and AUX
l Two Analog Line-level Mono Inputs for
Modem and Internal PC Beep
l Dual Stereo Line-level Outputs for
LINE_OUT and ALT_LINE_OUT
l Dual Microphone Inputs
l High Quality Pseudo-Differential CD Input
l Extensive Power Management Support
CS4299
l Meets or Exceeds the Microsoft
Audio Performance Requirements
l S/PDIF Digital Audio Output l CrystalClear
3D Stereo Enhancement
Description
The CS4299 is an AC 97 2.1 compatible stereo audio codec designed for PC multimedia systems. Using the industry leading CrystalClear signal technology, the CS4299 enables the design of PC 99-compliant desktop, portable, and entertainment PCs.
Coupling the CS4299 with a PCI audio accelerator or core logic supporting the AC 97 interface, implements a cost effective, superior quality, audio solution. The CS4299 surpasses PC 99 and AC 97 2.1 audio quality standards.
ORDERING INFO
CS4299-KQZ lead-free 48-pin LQFP 9x9x1.4 mm CS4299-JQZ lead-free 48-pin LQFP 9x9x1.4 mm
delta-sigma and mixed
PC 99
AC-LINK AND AC97
REGISTERS
PWR
MGT
SYNC
BIT_CLK
SDATA_OUT
SDATA_IN
RESET#
AC-
LINK
AC97
REGISTERS
S/PDIF
Preliminary Product Information
P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.cirrus.com
ANALOG INPUT MUX
AND OUTPUT MIXER
LINE CD AUX
ADC
DAC
INPUT
MUX
OUTPUT
MIXER
Σ
SRC
GAIN / MUTE CONTROLS
MIXER / MUX SELECTS
SRC
This document contains information for a new product. Cirrus Logic reserves the right to modify this product without notice.
PCM_DATA
PCM_DATA
18 bits
20 bits
VIDEO
MIC1
MIC2
PHONE
PC_BEEP
LINE_OUT ALT_LINE_OUT MONO_OUT
Copyright Cirrus Logic, Inc. 2006
(All Rights Reserved)
MAR ‘06
DS319PP6
1
TABLE OF CONTENTS
2 DS319PP6
CS4299
1. CHARACTERISTICS AND SPECIFICATIONS .................................................................5
Analog Characteristics ........................................................................................................5
Mixer Characteristics ..........................................................................................................6
Absolute Maximum Ratings ................................................................................................6
Recommended Operating Conditions.................................................................................6
Digital Characteristics .........................................................................................................6
AC 97 Serial Port Timing....................................................................................................7
2. GENERAL DESCRIPTION ...............................................................................................10
2.1 AC-Link ....................................................................................................................10
2.2 Control registers ......................................................................................................10
2.3 Output Mixer .............................................................................................................11
2.4 Input Mux .................................................................................................................11
2.5 Volume Control ........................................................................................................11
3. AC LINK FRAME DEFINITION .........................................................................................13
3.1 AC-Link Serial Data Output Frame ..........................................................................14
3.1.1 Serial Data Output Slot Tags (Slot 0) ...........................................................14
3.1.2 Command Address Port (Slot 1) ..................................................................15
3.1.3 Command Data Port (Slot 2) ........................................................................15
3.1.4 PCM Playback Data (Slots 3-10) .................................................................15
3.2 AC-Link Audio Input Frame ......................................................................................16
3.2.5 Serial Data Input Slot Tag Bits (Slot 0) .......................................................16
3.2.6 Status Address Port (Slot 1) .........................................................................16
3.2.7 Status Data Port (Slot 2) ..............................................................................17
3.2.8 PCM Capture Data (Slot 3-10) .....................................................................17
3.3 AC-Link Protocol Violation - Loss of SYNC ..............................................................18
4. REGISTER INTERFACE ..................................................................................................19
4.3 Reset Register (Index 00h) ......................................................................................20
4.4 Master Volume Register (Index 02h) .......................................................................20
4.5 Alternate Volume Register (Index 04h) ....................................................................21
4.6 Mono Volume Register (Index 06h) .........................................................................21
4.7 PC_BEEP Volume Register (Index 0Ah) .................................................................22
4.8 Phone Volume Register (Index 0Ch) ........................................................................22
4.9 Microphone Volume Register (Index 0Eh) ................................................................23
CS4299
Contacting Cirrus Logic Support
For a complete listing of Direct Sales, Distributor, and Sales Representative contacts, visit the Cirrus Logic web site at:
http://www.cirrus.com/corporate/contacts/sales.cfm
Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries. Intel is a registered trademark of Intel Corporation. Crystal Clear and Sound Fusion are trademarks of Cirrus Logic.
Preliminary product information describes products which are in production, but for which full characterization data is not yet available. Advance product infor­mation describes products which are in development and subject to development changes. Cirrus Logic, Inc. has made best efforts to ensure that the infor­mation contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided AS IS without warranty of any kind (express or implied). No responsibility is assumed by Cirrus Logic, Inc. for the use of this information, nor for infringements of patents or other rights of third parties. This document is the property of Cirrus Logic, Inc. and implies no license under patents, copyrights, trademarks, or trade secrets. No part of this publication may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, pho­tographic, or otherwise) without the prior written consent of Cirrus Logic, Inc. Items from any Cirrus Logic website or disk may be printed for use by the user. However, no part of the printout or electronic files may be copied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means (elec­tronic, mechanical, photographic, or otherwise) without the prior written consent of Cirrus Logic, Inc.Furthermore, no part of this publication may be used as a basis for manufacture or sale of any items without the prior written consent of Cirrus Logic, Inc. The names of products of Cirrus Logic, Inc. or other vendors and suppliers appearing in this document may be trademarks or service marks of their respective owners which may be registered in some jurisdictions. A list of Cirrus Logic, Inc. trademarks and service marks can be found at http://www.cirrus.com.
2
4.10 Stereo Analog Mixer Input Gain Registers (Index 10h - 18h) ................................. 24
DS319PP6 3
CS4299
4.11 Input Mux Select Register (Index 1Ah) ................................................................... 25
4.12 Record Gain Register (Index 1Ch) ......................................................................... 25
4.13 General Purpose Register (Index 20h) ................................................................... 26
4.14 3D Control Register (Index 22h) .............................................................................26
4.15 Powerdown Control/Status Register (Index 26h) ................................................... 27
4.16 Extended Audio ID Register (Index 28h) ................................................................ 28
4.17 PCM Front DAC Rate Register (Index 2Ch) ........................................................ 28
4.18 PCM L/R ADC Rate Register (Index 32h) .............................................................. 28
4.19 AC Mode Control Register (Index 5Eh) .................................................................. 29
4.20 Misc. Crystal Control Register (Index 60h) ............................................................. 29
4.21 S/PDIF Control Register (Index 68h) ..................................................................... 30
4.22 Vendor ID1 Register (Index 7Ch) ........................................................................... 31
4.23 Vendor ID2 Register (Index 7Eh) ........................................................................... 31
5. POWER MANAGEMENT ................................................................................................. 32
5.1 AC 97 Reset Modes ................................................................................................ 32
5.1.1 Cold AC ‘97 Reset ....................................................................................... 32
5.1.2 Warm AC ’97 Reset ..................................................................................... 32
5.1.3 Register AC ’97 Reset ................................................................................. 32
5.2 Powerdown Controls ................................................................................................ 33
6. ANALOG HARDWARE DESCRIPTION ......................................................................... 35
6.1 Analog Inputs ........................................................................................................... 35
6.1.4 Line-Level Inputs ........................................................................................35
6.1.5 CD Input .....................................................................................................35
6.1.6 Microphone Inputs ...................................................................................... 36
6.1.7 PC Beep Input ............................................................................................36
6.1.8 Phone Input ................................................................................................37
6.2 Analog Outputs ........................................................................................................ 37
6.2.9 Stereo Outputs ...........................................................................................37
6.2.10 Mono Output .............................................................................................37
6.3 Miscellaneous Analog Signals ................................................................................. 38
6.4 Power Supplies ........................................................................................................ 38
6.5 Reference Design .................................................................................................... 38
7. SONY/PHILIPS DIGITAL INTERFACE (S/PDIF) ............................................................ 39
8. GROUNDING AND LAYOUT .......................................................................................... 39
9. PIN DESCRIPTIONS 41
10. PARAMETER AND TERM DEFINITIONS ....................................................................46
11. REFERENCE DESIGN ................................................................................................. 48
12. REFERENCES .............................................................................................................. 49
13. PACKAGE DIMENSIONS ............................................................................................. 50
CS4299
LIST OF FIGURES
Figure 1. Power Up Timing .......................................................................................................8
Figure 2. Codec Ready from Startup or Fault Condition ........................................................... 8
Figure 3. Clocks ........................................................................................................................ 8
Figure 4. Data Setup and Hold.................................................................................................. 9
Figure 5. PR4 Powerdown and Warm Reset ............................................................................ 9
Figure 6. Test Mode .................................................................................................................. 9
Figure 7. AC-link Connections ................................................................................................10
Figure 8. Mixer Diagram.......................................................................................................... 12
Figure 9. AC-link Input and Output Framing ........................................................................... 13
Figure 10. Line Input (Replicate for Video and Aux) ...............................................................35
3
Figure 11. Differential 2 VRMS CD Input ................................................................................35
4 DS319PP6
CS4299
Figure 12. Differential 1 VRMS CD Input ................................................................................35
Figure 13. Microphone Input ...................................................................................................36
Figure 14. Microphone Pre-amplifier .......................................................................................36
Figure 15. PC_BEEP Input......................................................................................................36
Figure 16. Modem Connection ................................................................................................37
Figure 17. Alternate Line Output as Headphone Output .........................................................37
Figure 18. Stereo Output .........................................................................................................37
Figure 19. Voltage Regulator ..................................................................................................38
Figure 20. S/PDIF Output ........................................................................................................39
Figure 21. Conceptual Layout for the CS4297A......................................................................40
Figure 22. Pin Locations for the CS4297A ..............................................................................41
Figure 23. CS4297A Reference Design ..................................................................................48
LIST OF TABLES
Table 1. Mixer Registers .........................................................................................................19
Table 2. Analog Mixer Output Attenuation ..............................................................................21
Table 3. Microphone Input Gain Values ..................................................................................23
Table 4. Analog Mixer Input Gain Values................................................................................24
Table 5. Stereo Volume Register Index ..................................................................................24
Table 6. Input Mux Selection...................................................................................................25
Table 7. Slot Mapping ............................................................................................................29
Table 8. Device ID with Corresponding Part Number .............................................................31
Table 9. Revision Values.........................................................................................................31
Table 10. Powerdown PR Bit Functions..................................................................................33
Table 11. Powerdown PR Function Matrix ..............................................................................34
Table 12. Power Consumption by Powerdown Mode .............................................................34
CS4299
4
1. CHARACTERISTICS AND SPECIFICATIONS
DS319PP6 5
CS4299
CS4299
ANALOG CHARACTERISTICS Standard test conditions unless otherwise noted: T
AVdd = 5.0 V ±5%, DVdd = 3.3 V ±5%; 1 kHz Input Sine wave; Sample Frequency, Fs = 48 kHz; Z 1000 pF load, C
= 18 pF load (Note 1); Measurement bandwidth is 20 Hz - 20 kHz, 18-bit linear coding for ADC
DL
ambient
=100 kΩ/
AL
= 25° C,
functions, 20-bit linear coding for DAC functions; Mixer registers set for unity gain.
CS4299-KQZ CS4299-JQZ
Parameter
(Note 2)
Symbol Path
(Note 3)
UnitMin Typ Max Min Typ Max
Full Scale Input Voltage
V
Line Inputs Mic Inputs Mic Inputs (20 dB internal gain)
A-D A-D A-D
0.91
0.91
0.091
1.00
1.00
0.10
0.91
-
0.91
-
0.091
-
1.00
1.00
0.10
-
-
-
V V
RMS
RMS
RMS
Full Scale Output Voltage Line,Alternate Line, and Mono Outputs D-A 0.91 1.0 1.13 0.91 1.0 1.13 V
Frequency Response (Note 4) Analog Ac = ± 0.25 dB DAC Ac = ± 0.25 dB ADC Ac = ± 0.25 dB
Dynamic Range Stereo Analog inputs to LINE_OUT Mono Analog inputs to LINE_OUT DAC Dynamic Range ADC Dynamic Range
DAC SNR (-20 dB FS input w/ CCIR-RMS filter on output)
Total Harmonic Distortion + Noise
FR
DR
SNR
THD+N
20,000
90 85 87 85
-
-
-
20,000 20,000
-
-
-
-
A-A D-A A-D
A-A A-A D-A A-D
20 20 20
90 85 85 85
95 90 90 90
-
-
-
20,000 20,000 20,000
-
-
-
-
20 20 20
-
-
-
-
D-A-70---- dB
RMS
Hz Hz Hz
dB FS A dB FS A dB FS A dB FS A
(-3 dB FS input signal): Line/Alternate Line Output DAC ADC (all inputs except phone/mic) ADC (phone/mic)
A-A D-A A-D A-D
-74
-90
-
-91
-
-88
-
-84
-
-80
-80
-80
-74
-
-
-
-
-
-74
-
-74
-
-74
-
dB FS dB FS dB FS dB FS
Power Supply Rejection Ratio (1 kHz, 0.5 V
w/ 5 V DC offset)(Note 4) 40 60 - - 40 - dB
RMS
Interchannel Isolation 70 88 - - 88 - dB Spurious Tone (Note 4) - -100 - - -100 - dB FS Input Impedance (Note 4) 10 - - 10 - - k External Load Impedance 10 - - 10 - - k Output Impedance (Note 4) - 730 - - 730 - Input Capacitance (Note 4) - 5 - - 5 - pF Vrefout 2.0 2.28 2.5 2.0 2.28 2.5 V
Notes: 1. Z
refers to the analog output pin loading and CDL refers to the digital output pin loading.
AL
2. Parameter definitions are given in the Section 10, Parameter and Term Definitions.
3. Path refers to the signal path used to generate this data. These paths are defined in the Section 10, Parameter and Term Definitions.
4. This specification is guaranteed by silicon characterization, it is not production tested.
5
CS4299
6 DS319PP6
CS4299
MIXER CHARACTERISTICS (for CS4299-KQZ only)
Parameter Min Typ Max Unit
Mixer Gain Range Span Line In, Aux, CD, Video, Mic1, Mic2, Phone, PC Beep Mono Out, Alternate Line Out Line Out
Step Size All volume controls except PC Beep PC Beep
-
-
-
-
-
46.5
46.5
94.5
1.5
3.0
-
-
-
-
-
dB dB dB
dB dB
ABSOLUTE MAXIMUM RATINGS (AVss1 = AVss2 = DVss1 = DVss2 = 0 V)
Parameter Min Typ Max Unit
Power Supplies +3.3 V Digital
+5 V Digital
Analog Total Power Dissipation (Supplies, Inputs, Outputs) - - 1.25 W Input Current per Pin (Except Supply Pins) -10 - 10 mA Output Current per Pin (Except Supply Pins) -15 - 15 mA Analog Input voltage -0.3 - AVdd+
Digital Input voltage -0.3 - DVdd +
Ambient Temperature (Power Applied) -55 - 110 °C Storage Temperature -65 - 150 °C
-0.3
-0.3
-0.3
-
-
-
6.0
6.0
6.0
0.3
0.3
V V V
V
V
RECOMMENDED OPERATING CONDITIONS (AVss1 = AVss2 = DVss1 = DVss2 = 0 V)
Parameter Symbol Min Typ Max Unit
Power Supplies +3.3 V Digital
+5 V Digital
Analog
Operating Ambient Temperature 0 - 70 °C
DVdd1, DVdd2 DVdd1, DVdd2
AVdd1, AVdd2
3.135
4.75
4.75
3.3 5 5
3.465
5.25
5.25
V V V
DIGITAL CHARACTERISTICS (AVss = DVss = 0 V)
Parameter Symbol Min Typ Max Unit
Low level input voltage V High level input voltage V High level output voltage V Low level output voltage V Input Leakage Current (AC-link inputs) -10 - 10 µA Output Leakage Current (Tri-stated AC-link outputs) -10 - 10 µA Output buffer drive current
BIT_CLK, S/PDIF_OUT SDATA_IN, EAPD (Note 4)
il
ih
oh
ol
- -0.8V
0.65 x DVdd - - V
0.90 x DVdd 0.99 x DVdd - V
- 0.03 0.10 x DVdd V
-
-
24
-
4
-
mA mA
6
CS4299
DS319PP6 7
CS4299
AC 97 SERIAL PORT TIMING Standard test conditions unless otherwise noted: T
AVdd = 5.0 V, DVdd = 3.3 V; C
= 55 pF load.
L
ambient
= 25° C,
Parameter Symbol Min Typ Max Unit
RESET Timing
RESET# active low pulse width T RESET# inactive to BIT_CLK start-up delay T 1st SYNC active to CODEC READY set T Vdd stable to Reset inactive T
rst_low
rst2clk
sync2crd
vdd2rst#
1.0 - - µs
- 40.0 - µs
- 62.5 - µs
100 - - µs
Clocks
BIT_CLK frequency F BIT_CLK period T
clk_period
clk
- 12.288 - MHz
- 81.4 - ns BIT_CLK output jitter (depends on XTAL_IN source) - - 750 ps BIT_CLK high pulse width T BIT_CLK low pulse width T SYNC frequency F SYNC period T SYNC high pulse width T SYNC low pulse width T
sync_period
sync_high
sync_low
clk_high
clk_low
sync
36 40.7 45 ns 36 40.7 45 ns
-48-kHz
- 20.8 - µs
-1.3-µs
- 19.5 - µs
Data Setup and Hold
Output Propagation delay from rising edge of BIT_CLK T Input setup time from falling edge of BIT_CLK T Input hold time from falling edge of BIT_CLK T Input Signal rise time T Input Signal fall time T Output Signal rise time (Note 4) T Output Signal fall time (Note 4) T
co
isetup
ihold
irise
ifall
orise
ofall
81012ns
10 - - ns
0--ns 2-6ns 2-6ns 246ns 246ns
Misc. Timing Parameters
End of Slot 2 to BIT_CLK, SDATA_IN low (PR4) T SYNC pulse width (PR4) Warm Reset T SYNC inactive (PR4) to BIT_CLK start-up delay T Setup to trailing edge of RESET# (ATE test mode) (Note 4) T
s2_pdown
sync_pr4
sync2clk
setup2rst
Rising edge of RESET# to Hi-Z delay (Note 4) T
off
-.281.0µs
1.0 - - µs
162.8 285 - ns 15 - - ns
- - 25 ns
7
BIT_CLK
8 DS319PP6
CS4299
CS4299
RESET#
Vdd
BIT_CLK
SYNC
CODEC_READY
T
rst_low
T
vdd2rst#
Figure 1. Power Up Timing
T
sync2crd
T
rst2clk
BIT_CLK
T
orise
SYNC
T
irise
Figure 2. Codec Ready from Startup or Fault Condition
T
clk_highTclk_low
T
sync_high
T
Figure 3. Clocks
T
ifall
sync_period
T
clk_period
T
sync_low
T
ifall
8
BIT_CLK
DS319PP6 9
CS4299
BIT_CLK
SDATA_IN
SDATA_OUT, SYNC
Slot 1 Slot 2
T
co
T
isetup
Figure 4. Data Setup and Hold
T
ihold
CS4299
SDATA_OUT
SDATA_IN
SYNC
Write to 0x20 Data PR4 Don’t Care
T
s2_pdown
T
Figure 5. PR4 Powerdown and Warm Reset
RESET#
T
setup2rst
SDATA_OUT, SYNC
T
off
sync_pr4
T
sync2clk
SDATA_IN,
Hi-Z
BIT_CLK
Figure 6. Test Mode
9
CS4299
10 DS319PP6
CS4299
2. GENERAL DESCRIPTION
The CS4299 is a mixed-signal serial audio Codec compliant to the Intel® Audio Codec ‘97 Specifica- tion, revision 2.1 [1]. It is designed to be paired with a digital controller, typically located on the PCI bus or integrated within the system core logic chip set. The controller is responsible for all com­munications between the CS4299 and the remain­der of the system. The CS4299 contains two distinct functional sections: digital and analog. The digital section includes the AC-link interface, S/PDIF interface, serial data port, Sample Rate Converters, and power management support. The analog section includes the analog input multiplex­er (mux), stereo output mixer, mono output mixer, stereo Analog-to-Digital Converters (ADCs), ste­reo Digital-to-Analog Converters (DACs), and their associated volume controls.
2.1 AC-Link
All communication with the CS4299 is established with a 5-wire digital interface to the controller, as shown in Figure 7. This interface is called the AC-link. All clocking for the serial communication is synchronous to the BIT_CLK signal. BIT_CLK is generated by the primary audio codec and is used to clock the controller and any secondary audio co-
decs. Both input and output AC-link audio frames are organized as a sequence of 256 serial bits form­ing 13 groups referred to as ‘slots’. During each au­dio frame, data is passed bi-directionally between the CS4299 and the controller. The input frame is driven from the CS4299 on the SDATA_IN line. The output frame is driven from the controller on the SDATA_OUT line. The controller is also re­sponsible for issuing reset commands via the RE­SET# signal. Following a Cold Reset, the CS4299 is responsible for notifying the controller that it is ready for operation after synchronizing its internal functions. The CS4299 AC-link signals must use the same digital supply voltage as the controller chip, either +5 V or +3.3 V. See Section 3, AC Link Frame Definition, for detailed AC-link informa­tion.
2.2 Control registers
The CS4299 contains a set of AC ’97 compliant control registers and a set of Cirrus Logic defined control registers. These registers control the basic functions and features of the CS4299. Read access­es of the control registers by the AC ’97 controller are accomplished with the requested register index in Slot 1 of a SDATA_OUT frame. The following SDATA_IN frame will contain the read data in its
Digital AC’97
Controller
Figure 7. AC-link Connections
10
SYNC
BIT_CLK
SDATA_OUT
SDATA_IN
RESET#
CODEC
CS4299
DS319PP6 11
CS4299
Slot 2. Write operations are similar, with the regis­ter index in Slot 1 and the write data in Slot 2 of a SDATA_OUT frame. The function of each input and output frame is detailed in Section 3, AC Link Frame Definition. Individual register descriptions are found in Section 4, Register Interface.
2.3 Sample Rate Converters
The Sample Rate Converters (SRCs) provide high accuracy digital filters supporting sample frequen­cies other than 48 kHz to be captured from the
CS4299 or played from the controller. AC 97 re­quires support for two audio rates (44.1 and
®
48kHz). In addition, the Intel (ICHx) specification requires support for five more audio rates (8, 11.025, 16, 22.05, and 32). The CS4299 supports all these rate, as shown in Table 7 on page 29.
I/O Controller Hub
2.4 Output Mixer
The CS4299 has two output mixers, illustrated in Figure 8. The stereo output mixer sums together the analog inputs to the CS4299, including the PC_BEEP and PHONE signals, according to the settings in the volume control registers. The stereo output mix is sent to the LINE_OUT and
ALT_LINE_OUT pins on the CS4299. The mono output mixer generates a monophonic sum of the left and right channels from the stereo input mixer. The mono output mix is sent to the MONO_OUT output pin on the CS4299.
2.5 Input Mux
The input multiplexer controls which analog input is sent to the ADCs. The output of the input mux is converted to stereo 18-bit digital PCM data and sent to the controller by means of the AC-link SDATA_IN signal.
2.6 Volume Control
The CS4299 volume registers control analog input levels to the input mixer and analog output levels, including the master volume level, and the alternate volume level. The PC_BEEP volume control uses 3 dB steps with a range of 0 dB to -45 dB attenua­tion. All other analog volume controls use 1.5 dB steps. The analog inputs have a mixing range of +12 dB signal gain to -34.5 dB signal attenuation. The analog output volume controls have from 0 dB to -94.5 dB attenuation for LINE_OUT and from 0 dB to -46.5 dB attenuation for ALT_LINE_OUT and MONO_OUT.
11
CS4299
12 DS319PP6
CS4299
PC_BEEP
PHONE
PCM_OUT
MIC1
MIC2
LINE
CD
VIDEO
AUX
MIC
SELECT
MAIN D/A
CONVERTERS
DAC
BOOST
VOL
VOL
VOL
VOL VOL
VOL VOL VOL
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
PC BEEP BYPASS
Σ Σ
INPUT MIXER
ANALOG STEREO
Σ
ANALOG STEREO
OUTPUT MIXER
STEREO TO
MONO MIXER
Σ
1/2
STEREO TO
MONO MIXER
Σ
1/2
BYPASS BUFFER
3D
3D OUTPUT
MIXER
DAC DIRECT
MONO OUT
ADC
INPUT
MUX
MODE
SELECT
MASTER VOLUME
VOL VOL
ALT LINE VOLUME
MONO
VOLUME
VOL
MAIN ADC
GAIN
VOL
MUTE
MUTE
MUTE
OUTPUT BUFFER
OUTPUT BUFFER
OUTPUT BUFFER
MAIN A/D
CONVERTERS
ADCMUTE
LINE OUT
ALT LINE OUT
MONO OUT
PCM_IN
Figure 8. Mixer Diagram
12
CS4299
DS319PP6 13
CS4299
3. AC LINK FRAME DEFINITION
The AC-link is a bidirectional serial port with data organized into frames consisting of one 16-bit and twelve 20-bit time-division multiplexed slots. The first slot, called the tag slot, contains bits indicating if the CS4299 is ready to receive data (input frame) and which, if any, other slots contain valid data. Slots 1 through 12 contain audio or control/status data. Both the serial data output and input frames are defined from the controller perspective, not from the CS4299 perspective.
The controller synchronizes the beginning of a frame with the assertion of the SYNC signal.
Tag Phase Data Phase
Figure 9 shows the position of each bit location
within the frame. The first bit position in a new se-
rial data frame is F0 and the last bit position in the
serial data frame is F255. When SYNC goes active
(high) and is sampled active by the CS4299 (on the
falling edge of BIT_CLK), both devices are syn-
chronized to a new serial data frame. The data on
the SDATA_OUT pin at this clock edge is the final
bit of the previous frames serial data. On the next
rising edge of BIT_CLK, the first bit of Slot 0 is
driven by the controller on the SDATA_OUT pin.
On the next falling edge of BIT_CLK, the CS4299
latches this data in, as the first bit of the frame.
20.8 µs
(48 kHz)
SYNC
BIT_CLK
Bit Frame Position:
SDATA_OUT
Bit Frame Position:
SDATA_IN
12.288 MHz
81.4 ns
F0 F1 F2 F16F15F14F13F12
F255
Valid
Frame
F0 F1 F2 F16F15F14F13F12 F35 F56 F76F255
Codec Ready
Slot 1
Valid
Slot 1 Valid
GPIO
INT
0
Slot 2
Valid
Slot 2
Valid
F36 F57
Slot 12
Valid
Slot 12
Valid
Slot 0 Slot 1 Slot 2 Slot 3 Slot 4 Slots 5-12
Codec
Codec
0
ID1
R/W 0 WD15
ID0
0000
F35
F36
0
F56
D19 D18
F57
D19 D18 D19RD15
F76
D19
F96
D19
F96
D19
Figure 9. AC-link Input and Output Framing
F255
F255
GPIO
0
INT
13
CS4299
14 DS319PP6
CS4299
3.1 AC-Link Serial Data Output Frame
In the serial data output frame, data is passed on the SDATA_OUT pin to the CS4299 from the AC ’97 controller. Figure 9 illustrates the serial port timing.
The PCM playback data being passed to the CS4299 is shifted out MSB first in the most significant bits of each slot. Any PCM data from the AC ’97 controller that is not 20 bits wide should be left justified in its corresponding slot and dithered or zero-padded in the unused bit positions.
Bits that are reserved should always be ‘cleared’ by the AC 97 controller.
3.1.1 Serial Data Output Slot Tags (Slot 0)
Bit 1514131211109876543210
Val id
Slot 1
Frame
Valid Frame The Valid Frame bit determines if any of the following slots contain either valid playback data
Slot [1:2] Valid The Slot [1:2] Valid bits indicate the validity of data in their corresponding serial data output
Valid
Slot 2
Slot 3
Valid
Valid
for the CS4299 DACs or data for read/write operations. When ‘set’, at least one of the other AC-link slots contain valid data. If this bit is ‘clear’, the remainder of the frame is ignored.
slots. If a bit is ‘set’, the corresponding output slot contains valid data. If a bit is ‘cleared’, the corresponding slot will be ignored.
Slot 4
Valid
Slot 5
Valid
Slot 6
Valid
Slot 7
Valid
Slot 8
Valid
Slot 9
Valid
Slot 10
Valid
Reserved
Codec
ID1
Codec
ID0
Slot [3:10] Valid The Slot [3:10] Valid bits indicate Slot [3:10] contains valid playback data for the CS4299. If a
Slot Valid bit is ‘set’, the named slot contains valid audio data. If the bit is ‘clear’, the slot will be ignored. The CS4299 supports alternate slot mapping as defined in the AC 97 2.1 specification. For more information, see the AC Mode Control Register (Index 5Eh).
Codec ID[1:0] The Codec ID[1:0] bits display the Codec ID of the audio codec being accessed during the cur-
rent AC-link frame. Codec ID[1:0] = 00 indicates the primary codec is being accessed. Codec ID[1:0] = 01, 10, or 11 indicates one of three possible secondary codecs is being accessed. A non-zero value of one or more of the Codec ID bits indicates a valid Read or Write Address in Slot 1, and the Slot 1 R/W bit indicates presence or absence of valid Data in Slot 2.
14
CS4299
DS319PP6 15
CS4299
3.1.2 Command Address Port (Slot 1)
Bit 191817161514131211109876543210
R/W RI6RI5RI4RI3RI2RI1RI0000000000000
R/W Read/Write. When this bit is set, a read of the AC 97 register specified by the register index
bits will occur in the AC 97 2.1 audio codec. When the bit is ‘cleared’, a write will occur. For any read or write access to occur, the Frame Valid bit (F0) must be ‘set’ and the Codec ID[1:0] bits (F[14:15]) must match the Codec ID of the AC 97 2.1 audio codec being accessed. Additionally, for a primary codec, the Slot 1 Valid bit (F1) must be ‘set’ for a read access and both the Slot 1 Valid bit (F1) and the Slot 2 Valid bit (F2) must be ‘set’ for a write access. For a secondary co­dec, both the Slot 1 Valid bit (F1) and the Slot 2 Valid bit (F2) must be ‘cleared’ for read and write accesses. See Figure 9 for bit frame positions.
RI[6:0] Register Index. The RI[6:0] bits contain the 7-bit register index to the AC 97 registers in the
CS4299. All registers are defined at word addressable boundaries. The RI0 bit must be ‘clear’ to access CS4299 registers.
3.1.3 Command Data Port (Slot 2)
Bit 191817161514131211109876543210
WD15 WD14 WD13 WD12 WD11 WD10 WD9 WD8 WD7 WD6 WD5 WD4 WD3 WD2 WD1 WD0 Reserved
WD[15:0] Write Data. The WD[15:0] bits contain the 16-bit value to be written to the register. If an access
is a read, this slot is ignored.
NOTE: For any write to an AC 97 register, the write is defined to be an ‘atomic’ access. This means
that when the Slot 1 Valid bit in output Slot 0 is ‘set’, the Slot 2 Valid bit in output slot 0 should always be ‘set’ during the same audio frame. No write access may be split across 2 frames.
3.1.4 PCM Playback Data (Slots 3-10)
Bit 191817161514131211109876543210
PD19 PD18 PD17 PD16 PD15 PD14 PD13 PD12 PD11 PD10 PD9 PD8 PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0
PD[19:0] Playback Data. The PD[19:0] bits contain the 20-bit PCM playback (2s complement) data for
the left and right DACs and/or the S/PDIF transmitter. Table 8 on page 30 lists a cross reference for each function and its respective slot. The mapping of a given slot to a DAC is determined by the state of the ID[1:0] bits in the Extended Audio ID Register (Index 28h) and by the SM[1:0] and AMAP bits in the AC Mode Control Register (Index 5Eh).
15
CS4299
16 DS319PP6
CS4299
3.2 AC-Link Audio Input Frame
In the serial data input frame, data is passed on the SDATA_IN pin from the CS4299 to the AC ’97 con- troller. The data format for the input frame is very similar to the output frame. Figure 9 on page 13 illus­trates the serial port timing.
The PCM capture data from the CS4299 is shifted out MSB first in the most significant 18 bits of each slot. The least significant 2 bits in each slot will be ‘cleared’. If the host requests PCM data from the AC ’97 Controller that is less than 18 bits wide, the controller should dither and round or just round (but not trun­cate) to the desired bit depth.
Bits that are reserved or not implemented in the CS4299 will always be returned ‘cleared’.
3.2.1 Serial Data Input Slot Tag Bits (Slot 0)
Bit 1514131211109876543210
Codec Ready
Slot 1
Valid
Slot 2
Valid
Slot 3
Valid
Slot 4
Valid
Slot 5
Valid
Slot 6
Valid
Slot 7
Valid
Slot 8
Valid
Slot 9
Valid
Slot 10
Valid
00000
Codec Ready The Codec Ready bit indicates the readiness of the CS4299 AC-link. Immediately after a Cold
Reset this bit will be ‘clear’. Once the CS4299 clocks and voltages are stable, this bit will be set. Until the Codec Ready bit is set, no AC-link transactions should be attempted by the controller. The Codec Ready bit does not indicate readiness of the DACs, ADCs, Vref, or any other analog function. Those must be checked in the Powerdown Control/Status Register (In- dex 26h) by the controller before any access is made to the mixer registers. Any accesses to the CS4299 while Codec Ready is ‘clear’ are ignored.
Slot 1 Valid When ‘set’, the Slot 1 Valid bit indicates Slot 1 contains a valid read back address.
Slot 2 Valid When ‘set’, the Slot 2 Valid bit indicates Slot 2 contains valid register read data.
Slot [3:10] Valid When ‘set’, the Slot [3:10] Valid bits indicate Slot [3:10] contains valid capture data from the
CS4299 ADCs. Only if a Slot [3:10] Valid bit is ‘set’ will the corresponding input slot contain valid data.
3.2.2 Status Address Port (Slot 1)
Bit 1918171615141312111098 76 5 4 3210
0 RI6 RI5 RI4 RI3 RI2 RI1 RI0 SR3 SR4 SR5 SR6 SR7 SR8 SR9 SR10 0 Reserved
RI[6:0] Register Index. The RI[6:0] bits echo the AC 97 register address when a register read has
been requested in the previous frame. The CS4299 will only echo the register index for a read access. Write accesses will not return valid data in Slot 1.
SR[3:10] Slot Request. If SRx is ‘set’, this indicates the CS4299 SRC does not need a new sample on
the next AC-link frame for that particular slot. If SRx is ‘clear’, the SRC indicates a new sample is needed on the following frame. If the VRA bit in the Extended Audio Status/Control Register
(Index 2Ah)
and the SR[3:10] bits are used to request data.
16
is clear, the SR[3:10] bits are always 0. When VRA is set, the SRC is enabled
Loading...
+ 36 hidden pages