Chauvet DJ OVATION FD-105WW User Manual

User Manual

Edition Notes

The Ovation FD-105WW User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the Ovation FD-105WW as of the release date
of this edition.

Trademarks

CHAUVET, the Chauvet logo and Ovation FD-105WW are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.

Copyright Notice

The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.

© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com

.

Document Revision

This Ovation FD-105WW User Manual is the 1st edition of this document. Go to

www.chauvetprofessional.com

for the latest version.

Ovation FD-105WW User Manual Rev. 1

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Manual Conventions ..................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

Personal Safety.............................................................................................................. 2

Mounting and Rigging .................................................................................................... 2

Power and Wiring........................................................................................................... 2

Operation ...................................................................................................... 2

Expected LED Lifespan................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 4

3. Setup ........................................................................................... 5

AC Power...................................................................................................... 5

AC Plug .......................................................................................................................... 5

Power Linking................................................................................................................. 5

DMX Linking.................................................................................................. 5

DMX Personalities.......................................................................................................... 5

RDM (Remote Device Management) ............................................................................. 5

Master/Slave Connectivity............................................................................. 5

Mounting ....................................................................................................... 6

Orientation...................................................................................................................... 6

Rigging ........................................................................................................................... 6

Replacing The Fuse ....................................................................................................... 6

Procedure....................................................................................................................... 6

Mounting Diagram ................................................................................................... 7

4. Operation .................................................................................... 8

Control Panel Operation................................................................................ 8

Control Options ............................................................................................. 8

Programming................................................................................................. 8

Menu Map ..................................................................................................... 8

Configuration (DMX) ..................................................................................... 9

Control Personalities ...................................................................................................... 9

Starting Address............................................................................................................. 9

Control Panel Lock......................................................................................................... 10

Passcode ................................................................................................................ 10

Dimmer Curve ................................................................................................................ 10

Dimmer Profiles.............................................................................................................. 10

Power Performance Output Options .............................................................................. 10

Loss of Signal Setting .................................................................................................... 10

DMX Values .................................................................................................. 11

STD.P-Ch....................................................................................................................... 11

Dos-Ch ........................................................................................................................... 11

UNO-Ch ......................................................................................................................... 11

Configuration (Standalone) ............................................................................................ 11

Static Mode .................................................................................................................... 11

Master/Slave .................................................................................................................. 11

LED Frequency .............................................................................................................. 11

Ovation FD-105WW User Manual Rev. 1

i

Table of Contents

Manual Zoom Control..................................................................................................... 12

System Information ........................................................................................................ 12

Factory Reset................................................................................................................. 12

5. Technical Information ................................................................ 13

Product Maintenance .................................................................................... 13

6. Technical Specifications ........................................................... 14

Photometrics Charts...................................................................................... 15

7. Returns........................................................................................ 16

8. Contact Us .................................................................................. 17

ii

Ovation FD-105WW User Manual Rev. 1

BEFORE YOU BEGIN

1. Before You Begin

What Is Included

• Ovation FD-105WW

• Neutrik® powerCON® Power Cord

• Gel Frame (6.25 in/158mm accessories)

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

<SET> A button on the product’s control panel

Settings A product function or a menu option

• Warranty Card

• Quick Reference Guide

Symbols

Symbol Meaning

Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.

Important installation or configuration information. The product may not function
correctly if this information is not used.

Useful information.

Any reference to power connections in this manual assumes the use of Neutrik®
powerCON® cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.

Ovation FD-105WW User Manual Rev. 1

Page 1 of 17

BEFORE YOU BEGIN

Safety Notes

Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.

Proper installation of this product must meet all applicable local codes and
regulations.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

• This product is not intended for permanent installation.

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20)

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.

• Make sure there are no flammable materials close to this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

• Never carry the product by the power cord.

Power and Wiring

• Make sure the power cord is not crimped or damaged.

• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

• In the event of a serious operation problem, stop using this product immediately!

If your Chauvet product requires service, contact Chauvet Technical Support.

Expected LED Lifespan

LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.

Page 2 of 17

Ovation FD-105WW User Manual Rev. 1

Introduction

Menu Buttons

Dimmer

Adjustment Knob

Neutrik® powerCON®

In/Out

Display

Handle

DMX 3- and 5- pin In/Out

Fuse Holder

Voltage Selector

2. Introduction

Description

Ovation FD-105WW is a LED Fresnel wash utilizing data and power sensors to run on both dimming power
systems and constant power rigs. A zoom range of 25° to 76° and a soft, warm white wash with high CRI
make it a worthy LED replacement for aging incandescent six-inch Fresnels. Enjoy the benefits of LED
lighting without being held back by previous investments made in major dimming systems.

Features

• Operating modes:

• UNO: 8bit Dim: dimmer control

• DOS: 16bit Dim: dimmer and fine dimmer control

• STD.P: dimmer, dimmer fine, and strobe

• 6“warm white LED Fresnel with class leading output

• Soft and even field of light

• Works perfectly on conventional dimmers or constant power with DMX

• Auto-senses power/data and responds appropriately

• Superior low end dimming whether using dimmers or constant power

• Perfect fixture for the retrofit market, utilizes existing dimming infrastructure flawlessly

• 16-bit dimming resolution (DMX mode) for smooth fades

• Flat, even field of light, with manual zoom (25-76 deg)

• Virtually silent operation for use in any situation

Product Overview

Ovation FD-105WW User Manual Rev. 1

Page 3 of 17

Product Dimensions

12.8 in

325 mm

16.5 in

420 mm

6.7in

169 mm

6.3 in

160 mm

Introduction

Page 4 of 17

Ovation FD-105WW User Manual Rev. 1

Setup

3. Setup

AC Power

Each Ovation FD-105WW has an auto-ranging power supply that works with an input voltage range of 100
to 240 VAC, 50/60 Hz. To determine the power requirements for each Ovation FD-105WW, refer to the
label affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com

• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Ovation FD-105WW comes with a power input cord terminated with a Neutrik® powerCON®
connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that
came with your product has no plug, or if you need the change the plug, use the table below to wire the
new plug.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

Power Linking

The product supports power linking. You can power link up to 14 products at 120 V, or up to 24 products at
230 V.

This product comes with a power input cord. Power linking cables are available from Chauvet for purchase.

DMX Linking

You can link the Ovation FD-105WW to a DMX controller using a 3- or 5-pin DMX connection. If using
other DMX-compatible products with this product, you can control each individually with a single DMX
controller.

DMX Personalities

The Ovation FD-105WW uses a 3- or 5-pin DMX data connection for the UNO: 8bit Dim, Dos: 8bit Dim,
16bit Dim, and STD.P: 8bit Dim, 16bit Dim, and strobe DMX personalities.

• Refer to the Introduction

• Refer to the Operation chapter to learn how to configure the Ovation FD-105WW to work in these
personalities.

•The DMX Values section provides detailed information regarding the control personalities.

If you are not familiar with or need more information about DMX standards, Master/
Slave connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com

chapter for a brief description of each DMX personality.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. The Ovation FD-105WW supports RDM protocol that allows
feedback to monitor temperature and changes to DMX Address, DMX Personality, Dimmer Mode, and
LED Frequency menu options. Download the User Manual from www.chauvetprofessional.com
details.

for more

Master/Slave Connectivity

The Master/Slave mode allows an Ovation FD-105WW (the master) to control one or more Ovation FD­105WW products (the slaves) without a DMX controller. One Ovation FD-105WW becomes the master when
running an auto program, or by being in Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.

DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.

.

.

Ovation FD-105WW User Manual Rev. 1

Page 5 of 17

Setup

•The Operation
configure the master and slaves.

• If you are not familiar with or need more information about DMX standards, or the
DMX cables needed to link this product to a DMX controller, download the DMX
Primer from the Chauvet website: www.chauvetprofessional.com

section of this manual provides detailed instructions on how to

.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.

• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications

• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power linking cables to
reach.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.

for weight information.

Replacing The Fuse

1. Disconnect this product from power.

2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

Procedure

The Ovation FD-105WW comes with a bracket to which you can attach a mounting clamp directly. You
must supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product. For the CHAUVET Professional line of mounting
clamps, go to http://www.trusst.com/products

.

.

Page 6 of 17

Ovation FD-105WW User Manual Rev. 1

Setup

Bracket

Mounting Clamps

Bracket Adjustment Knob

Safety Cables

Mounting Diagram

Ovation FD-105WW User Manual Rev. 1

Page 7 of 17

Operation

4. Operation

Control Panel Operation

Button Function

<MENU> Exits from the current menu or function

<ENTER>

<UP>

<DOWN>

Control Options

Set the Ovation FD-105WW starting address in the 001–512 DMX range. This enables control of up to 171
products in the STD.P personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.

• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.

• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.

• Press <MENU> repeatedly to exit to the previous main level.

Menu Map

Main Level Programming Levels Description

STATIC DIMMER 000-100 Local control of output

RUN MODE

ADRESS 000-509 Sets the starting address

KEY

DIMMER

SETTING

CURVE

PERFORM

SLOCK

PERSONALITY

Enables the currently displayed menu or sets the currently selected
value into the selected function

Navigates upwards through the menu list or increases the numeric
value when in a function

Navigates downwards through the menu list or decreases the numeric
value when in a function

DMX Sets the mode to DMX control

SLAVE Sets the mode to master/slave

DMMR

SENS

ON
OFF
OFF No dimmer

DIM1
DIM2
DIM3
DIM4

OFF No dimmer

CURVE1
CURVE2
CURVE3

LIVE

STUDIO

ON
OFF

UNO

STD.P

Sets the mode to dimmer control,
which turns off data input

Automatically chooses between
DMMR and DMX

Sets the key lock (Passcode mode)

Slow (DIM4) to fast (DIM1) dimmer
speeds

Large (CURVE3) to small
(CURVE1) dimmer curves

Balances LED cooling using fans
and output power level

Maintains LED cooling by limiting
power level

SETTING menu access lock

Selects DMX personalityDOS

Page 8 of 17

Ovation FD-105WW User Manual Rev. 1

Operation

Main Level Programming Levels Description

Continues last command upon loss

SETTING

(cont.)

INFO

DMX ERROR

RESET Pass code: Resets product to factory defaults

MODE SETTING

PWM

VERSION V__ Shows total product hours

RDM

UID _ _ _ _ _ Displays product UID for RDM

LABEL _ _ _ _ _ Displays product label for RDM

SAVE

BACK

SELF

MASTER

600Hz
1200Hz
2000Hz
4000Hz
6000Hz

25KHz

of DMX signal
Blacks out product upon loss of

DMX signal

No DMX output from product in
standalone

Sends DMX output in standalone
mode

Selects the PWM output frequency

Configuration (DMX)

Use control configurations to operate the product with a DMX controller.

Control Personalities

This setting allows you to choose a particular control personality.

1. Go to the DMX Personality main level.

2. Select the desired personality (see table below).

Personality Channels

UNO: 8bit Dim 1

DOS: 16bit Dim 2

STD.P 16bit Dim, 8bit

Dim, Strobe

3

• See the Starting Address

personality.

• Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.

section for the highest starting address you can select for each

Starting Address

Each product will respond to a unique starting address from the DMX controller. All products with the same
starting address will respond in unison.

1. Go to the DMX Address main level.

2. Select the starting address (001–512).

The highest recommended starting address for each DMX mode is as follows:

DMX Mode DMX Address

UNO 512
DOS 511

STD.P 510

Ovation FD-105WW User Manual Rev. 1

Page 9 of 17

Operation

Control Panel Lock

This setting allows activation or deactivation of the control panel lock, which keeps non-authorized users
from changing the product’s settings.

1. Go to the SETTINGS main level.

2. Select KEY.

3. Select ON (to turn on passcode mode), or OFF (to turn the passcode mode off).

When the control panel lock is activated, after 30 seconds of control panel
inactivity, or after turning on the product, the Ovation FD-105WW will prompt you
to enter the passcode.

Passcode

After being prompted, enter the following passcode: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>. This
passcode cannot be changed and must be used whenever prompted.

Menu Access Lock

This setting allows activation or deactivation of the menu access lock. Activating the menu access lock
prevent non-authorized personnel from making any changes to the programming levels under the
SETTINGS main level.

1. Go to the SETTINGS main level.

2. Select KEY.

3. Select ON (to turn on passcode mode), or OFF (to turn the passcode mode off)

When the menu access lock is activated, in order to access the SETTING
programming levels, the product will prompt you to enter the passcode. Enter
the passcode as described below.

Dimmer Curve

Select the dimmer curve of the Ovation FD-105WW by selecting the CURVE programming level.

1. Go to the SETTING main level.

2. Select the CURVE programming level.

3. Select dimmer CURVE 1, CURVE 2, CURVE 3 (small to large), or OFF (linear output).

Dimmer Profiles

This setting determines how fast the output of the Ovation FD-105WW changes when you modify the output
value. This setting provides four different options to simulate the dimming curve of an incandescent lighting
product.

1. Go to the SETTING main level.

2. Go to the DIMMER main level.

3. Select a dimmer curve (Off, DIM 1, DIM 2, DIM 3, or DIM 4).

Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-4: The output follows the dimmer value based on the corresponding dimmer

curve, DIM1 being the fastest.

Power Performance Output Options

The Ovation FD-105WW offers two power output options during the cooling of the fixture’s LEDs.

1. Go to the SETTING main level.

•Select LIVE to cool the LEDs by balancing the use of the fan and the power output level.

•Select STUDIO to cool the LEDs by maintaining the use of the fan and limiting the power

output level.

Loss of Signal Setting

This setting controls how the product responds when the DMX signal is lost.

1. Go to the SETTING main level.

•Select SAVE to use the last command programmed when the signal is lost.

•Select BACK to turn off the LEDs when the signal is lost.

Page 10 of 17

Ovation FD-105WW User Manual Rev. 1

Operation

DMX Values

STD.P-Ch

Channel Function Value Percent/Setting

1 Dimmer 000
2 Dimmer Fine 000

3Strobe

DOS-Ch

Channel Function Value Percent/Setting

1 Dimmer 000
2 Dimmer Fine 000

UNO-Ch

Channel Function Value Percent/Setting

1 Dimmer 000

255 0–100%
255 0–100%

000

009 Open

010

099 Strobe (slow to fast)

100

109 Open

110

179 Lightning effect (slow to fast)

180

189 Open

190

255 Random strobe (slow to fast)

255 0-100%
255 0-100%

255 0-100%

Configuration (Standalone)

Use standalone configuration to operate the product without a DMX controller.

Static Mode

The Static mode allows for permanent dimmer, zoom, and strobe presets without a DMX controller.

1. Go to the STATIC main level.

2. Select DIMMER.

3. Select the desired value (0–100).

Master/Slave

The Master/Slave mode allows a group of Ovation FD-105WW products (the slaves) to simultaneously
duplicate the output of another Ovation FD-105WW (the master) without a DMX controller.
To set each of the slaves:

1. Go to the SETTING main level.

2. Select MODE SETTING, press ENTER.

3. Select SELF.

To set the master:

1. Go to the SETTING main level

2. Select MODE SETTING, press ENTER.

3. Select MASTER.

• The master is the one that runs a program whether in Auto or Static mode.

• Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.

• The master should be the first product in the daisy chain.

LED Frequency

This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation FD­105WW.

1. Go to the LED Frequency main level.

2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).

Ovation FD-105WW User Manual Rev. 1

Page 11 of 17

Operation

Manual Zoom Control

The Ovation FD-105WW has a 14° to 63° manually controlled zoom. To change the zoom angle, follow the
instructions below.

• Locate the zoom adjustment knob on the Ovation FD-105WW and turn the knob to increase or
decrease the zoom angle.

System Information

This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.

1. Go to the INFORMATION main level.

2. Select VERSION or RDM, and the product version, UID, or label will be displayed.

Factory Reset

This option restores the Ovation FD-105WW to factory default settings.

1. Go to the SETTING main level.

2. Select RESET.

3. Enter the passcode and press ENTER to reset the product to its factory settings.

Page 12 of 17

Ovation FD-105WW User Manual Rev. 1

Technical Information

5. Technical Information

Product Maintenance

To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.

Clean this product at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced light source life and increased mechanical wear.

To clean the product:

1. Unplug the product from power.

2. Wait until the product is at room temperature.

3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents.

4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.

5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.

6. Softly drag any dirt or grime to the outside of the transparent surface.

7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.

Do not spin the cooling fan using compressed air because you could damage it.

Ovation FD-105WW User Manual Rev. 1

Page 13 of 17

Technical Specifications

6. Technical Specifications

Dimensions and Weight

Length Width Height Weight

12.8 in (326 mm) 11 in (279 mm) 16.5 in (420 mm) 13 lb (5.9 kg)

Note: Dimensions in inches rounded to the nearest decimal digit.

Power

Power Supply Type Range Voltage Selection

Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging

Parameter 120 V, 60 Hz 230 V, 50 Hz

Consumption 115 W 127 W

Operating Current 0.941 A 0.557 A

Power linking current (products) 13.6 A (7 products) 13.6 A (13 products)

Power I/O U.S./Worldwide UK/Europe

Power input connector Neutrik® powerCON® A Neutrik® powerCON® A

Power output connector Neutrik® powerCON® B Neutrik® powerCON® B

Power Cord plug Edison (U.S.) Local Plug

Light Source

Type Color Quantity Power Current Lifespan

LED Warm White 1 79 W 2 A 50,000 hours

Photometrics

Parameter Value

Strobe Rate 0 to 25Hz

Color Temperature (at full) 3168 K

Beam Angle 8° to 51°

Field Angle 14° to 63°

Zoom Angle 14° to 63°
Illuminance @ 5 m (14°) 5,927 lux
Illuminance @ 5 m (63°) 380 lux

Thermal

Maximum External Temperature Cooling System

113 °F (45 °C) Fan-assisted convection

DMX

I/O Connector Channel Range

3- and 5-pin XLR 1, 2, or 3

Ordering

Product Name Item Name Item Code UPC Number

Ovation FD-105WW OVATIONFD105WW 01031457 781462218058

Page 14 of 17

Ovation FD-105WW User Manual Rev. 1

Technical Specifications

Beam FieldField

Beam FieldField

Photometrics Charts

Narrow (14°)

Beam

Distance

15 ft 2.10 ft 3.68 ft 302 42 14.31 ft 18.38 ft

20 ft 2.80 ft 4.91 ft 170 24 19.08 ft 24.51 ft

30 ft 4.20 ft 7.37 ft 76 11 28.62 ft 36.77 ft

40 ft 5.59 ft 9.82 ft 43 6 38.16 ft 49.02 ft

50 ft 6.99 ft 12.28 ft 27 4 47.70 ft 61.28 ft

75 ft 10.49 ft 18.42 ft 12 2 71.55 ft 91.92 ft

100 ft 13.99 ft 24.56 ft 6 1 95.40 ft 122.56 ft

125 ft 17.48 ft 30.70 ft 4 1 119.24 ft 153.20 ft

Diameter

Field

Diameter Footcandle Footcandle

Ovation FD-105WW (Imperial)

Wide (63°)

Beam

Diameter

Field

Diameter

150 ft 20.98 ft 36.84 ft 3 0 143.09 ft 183.84 ft

Narrow (14°)

Distance

1 m 0.14 m 0.25 m 68,050 9,500 0.95 m 1.23 m

2 m 0.28 m 0.49m 17,013 2,375 1.91 m 2.45 m

5 m 0.70 m 1.23 m 2,722 380 4.77 m 6.13 m

8 m 1.12 m 1.96 m 1,063 148 7.63 m 9.80 m

10 m 1.40 m 2.46 m 681 95 9.54 m 12.26 m

15 m 2.10 m 3.68 m 302 42 14.31 m 18.38 m

20 m 2.80 m 4.91 m 170 24 19.08 m 24.51 m

Beam

Diameter

Field

Diameter Lux Lux

Ovation FD-105WW (Metric)

Wide (63°)

Beam

Diameter

Field

Diameter

25 m 3.50 m 6.14 m 109 15 23.85 m 30.64 m

30 m 4.20 m 7.37 m 76 11 28.62 m 36.77 m

Ovation FD-105WW User Manual Rev. 1

Page 15 of 17

Returns

Returns

Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will
not issue call tags.

Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product.
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the
return.

Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA
number.

Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.

Once you have the RMA number, provide the following information on a piece of paper and place it inside
the box:

• Your name

• Your address

• Your phone number

•RMA number

• A brief description of the problem

Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.

Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

Page 16 of 17

Ovation FD-105WW User Manual Rev. 1

Contact Us

Contact Us

World Headquarters

UK

Benelux

France

Germany

Mexico

Address: Av. de las Partidas 34 - 3B

Lerma, Edo. de México, CP 52000

General Information Technical Support

Address: 5200 NW 108th Ave. Voice: [phone]

Sunrise, FL 33351 Fax: [phone]

Voice: [phone] Email: [e-mail]

Fax: [phone]

Toll Free: [phone] Website: www.chauvetprofessional.com

Address: Unit 1C Email: [e-mail]

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu

NG16 6NT

Voice: [phone]

Fax: + 44 (0) 1773 511110

Address: Stokstraat 18 Email: [e-mail]

9770 Kruishoutem

Belgium Website: www.chauvetprofessional.eu

Voice: [phone]

Address: 3, Rue Ampère

91380 Chilly-Mazarin

France Website: www.chauvetprofessional.eu

Voice: [phone]

Address: Bruno-Bürgel-Str. 11

28759 Bremen

Germany Website: www.chauvetprofessional.eu

Voice: [phone]

(Entrance by Calle 2)

Zona Industrial Lerma Website: www.chauvetprofessional.mx

Voice: [phone]

Email: [e-mail]

Email: [e-mail]

Email: [e-mail]

Visit the applicable website above to verify our contact information and instructions to request support.
Outside the U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of
record

Ovation FD-105WW User Manual Rev. 1

Page 17 of 17