DMX-4
User Manual
DMX
Mode
Standalone
Mode
MENUMODE
Address
Personality
Switch/Dimmer
Switch:
Dimmer:
On if DMX On
Program
Run Speed
Dimmer
DISPLAY DESCRIPTION
~
~
~
~
~
INPUT VOLTAGE EQUALS OUTPUT VOLTAGE
1-CHANNEL
2-CHANNEL
4-CHANNEL
CHANNEL 1 FUNCTION
CHANNEL 2 FUNCTION
CHANNEL 3 FUNCTION
CHANNEL 4 FUNCTION
TURN POWER ON/OFF
AS DMX IS DETECTED
SLOW ~ FAST
0% ~ 100%
OUTPUT: 5 A / CH; 15 A MAX
CH-1 CH-2 CH-3 CH-4
DMX SIGNAL
DMX
STANDALONE
DMX-4
1. Befo re You B e gin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims............................................................................................................................ 1
Text Conventions.......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Product at a Glance ...................................................................................... 2
Safety Notes.................................................................................................. 2
2. Introdu c tio n ................................................................................ 3
Description.................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 4
Product Dimensions...................................................................................... 5
3. S etup ........................................................................................... 6
AC Power...................................................................................................... 6
Fuse Replacement......................................................................................................... 6
Dimmer/Switch Operation.............................................................................................. 6
Mounting ....................................................................................................... 7
Orientation...................................................................................................................... 7
Rigging........................................................................................................................... 7
4. Ope ratio n .................................................................................... 8
Control Panel Operation................................................................................ 8
Dimmer or Switch Mode................................................................................ 8
Menu Map..................................................................................................... 8
Configuration (DMX) ..................................................................................... 9
DMX Personality and Starting Address.......................................................................... 9
DMX Values.................................................................................................. 9
4-Channel....................................................................................................................... 9
2-Channel....................................................................................................................... 9
1-Channel....................................................................................................................... 9
Configuration (Standalone)........................................................................... 9
Automatic Programs....................................................................................................... 9
5. Mainte na nce................................................................................ 10
Product Maintenance.................................................................................... 10
6 . Tech n ica l S p ecifica tion s ... ........................................................ 11
7. Re turn s ........................................................................................ 12
8. Co ntact Us .................................................................................. 14
DMX-4 User Manual Rev. 3
BEFORE YOU BEGIN
1. BEFORE YOU BEGIN
What Is Included
• DMX-4
• Power Cord
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
CONVENTION MEANING
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
• Warranty Card
• Quick Reference Guide
Symbols
SYMBOL MEANING
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
!
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2017 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and DMX-4 are registered trademarks or trademarks of Chauvet & Sons
LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and
product names and logos referred to herein may be trademarks of their respective companies.
DMX-4 User Manual Rev. 3
Page 1 of 14
Product at a Glance
BEFORE YOU BEGIN
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
Safety Notes
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the
fuse.
• Make sure the power cord is not crimped or damaged.
!
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety
cable.
• Make sure there are no flammable materials close to the product when operating.
• Always make sure that the voltage of the outlet to which you are connecting the product
is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose
the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the hanging/
mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at
higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
• This product is not intended for permanent installation.
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
Page 2 of 14
Keep this User Manual for future use. If you sell the product to someone else, be sure that
they also receive this document.
DMX-4 User Manual Rev. 3
INTRODUCTION
2. INTRODUCTION
Description
The DMX-4 is a 4-channel dimmer/switch pack optimized for use with LED products. Each channel can be
individually set as a dimmer or a switch. Four duplex outlets can control up to 8 products simultaneously.
Automated programs have adjustable speeds and dimmer levels, which offer great control without DMX.
Features
• 4-channel dimmer/switch pack with up to 5 amps per channel (15 A max)
• Auto on/off when DMX is detected or removed
• Provides DMX control for on/off or dimming to non-DMX fixtures
• Built in circuitry generates a phantom load to prevent ghosting and flickering in LED fixtures
• Custom looks at your fingertips with 16 built-in, configurable chases
• Easy control using standalone mode or DMX control
• Increase flexibility by setting each channel as a dimmer or switch
• Control up to eight units simultaneously with four duplex outlets
• Monitor the status of each channel with separate LED indicators
• Generate a synchronized show using easily accessible automated programs, built-in automated
programs
• Great control without DMX using automated programs with adjustable speeds and dimmer levels
DMX-4 User Manual Rev. 3
Page 3 of 14
Product Overview
Channel
Outputs
INTRODUCTION
Power
In
Power
Switch
POWER INPUT: 100~240 VAC, 50/60 Hz
1234
INPUT VOLTAGE EQUALS OUTPUT VOLTAGE
THIS APPARATUS MUST BE EARTHED
RISK OF ELECTRIC SHOCK
N’ OUVREZ PAS. RISQUE DE CHOC ELECTRIQUE
OUTPUT: 5 A / CH; 15 A MAX
CH-1 CH-2 CH-3 CH-4
DMX SIGNAL
CAUTIONWARNING
DO NOT OPEN
THIS PRODUCT MUST NOT BE CONTINUOUSLY
USED FOR A LONG DURATION UNDER TOTAL 15 A LOAD
DMX IN DMX OUT
DMX
STANDALONE
LED
Channel
Indicators
LED
Display
Control
Buttons
Page 4 of 14
Fuse
Holders
DMX-4 User Manual Rev. 3
INTRODUCTION
Product Dimensions
7.7 in
194 mm
8.3 in
POWER INPUT: 100~240 VAC, 50/60 Hz
INPUT VOLTAGE EQUALS OUTPUT VOLTAGE
THIS APPARATUS MUST BE EARTHED
RISK OF ELECTRIC SHOCK
N’ OUVREZ PAS. RISQUE DE CHOC ELECTRIQUE
OUTPUT: 5 A / CH; 15 A MAX
CH-1 CH-2 CH-3 CH-4
DMX SIGNAL
DIMMER / SWITCH PACK
CAUTIONWARNING
DO NOT OPEN
THIS PRODUCT MUST NOT BE CONTINUOUSLY
USED FOR A LONG DURATION UNDER TOTAL 15 A LOAD
210 mm
DMX
STANDALONE
DMX-4 User Manual Rev. 3
1234
DMX IN DMX OUT
2.8 in
70 mm
Page 5 of 14
SETUP
3. SETUP
AC Power
The DMX-4 has an auto-ranging power supply and it can work with an input voltage range of 100 to 240
VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring),
use the current value listed on the label affixed to the product’s back panel, or refer to the product’s
specifications chart. The listed current rating indicates the product’s average current draw under normal
conditions.
• Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
!
Fuse Replacement
The DMX-4 is equipped with replaceable fuses. Each channel has its own 7 A fuse that runs through the
20 A main power supply.
1. Disconnect the product from power.
2. With a #2 Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
• T o eliminate unnecessary wear and improve its lifespan, during periods of nonuse completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
!
Dimmer/Switch Operation
Dimmer/switch packs are primarily intended for lamp-based P AR cans. Connecting a fixture equipped with
an electronic (switching) power supply to a dimmer/switch pack may damage the fixture or make it work
erratically. The improved DMX-4’s design now allows you to switch on and off loads equipped with
electronic power supplies, such as LED-based luminaries or laser fixtures. However, the DMX-4 must be in
Switch mode before connecting loads of this type to it. Please see the instructions on how to set the DMX4 in Dimmer or Switch Mode
.
Always make sure that the DMX-4 is in Switch mode before connecting a load equipped with
an electronic power supply to it. Doing otherwise could damage the load.
!
The DMX-4 is optimized to also operate with LED-based products.
Page 6 of 14
DMX-4 User Manual Rev. 3
SETUP
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The DMX-4 may be mounted in any position; however, make sure adequate ventilation is provided around
the product.
Rigging
• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Truss/Pipe Mounting
INPUT VOLTAGE EQUALS OUTPUT VOLTAGE
OUTPUT: 5 A / CH; 15 A MAX
CH-1 CH-2 CH-3 CH-4
DMX SIGNAL
Wall Mounting
DMX
STANDALONE
Wall Mounting Surface Wall Mounting Surface
Alternate Rigging
If you are using this product with truss or a lighting stand, there is an alternate rigging configuration
available. This option is ideal for hanging the product without using a mounting clamp.
1. Unplug the product from power.
2. On the back of the product, locate the six Phillips-head screws.
3. Use a Phillips-head screwdriver to remove these screws.
4. The mounting bracket will now come off. Be careful not to damage the internal components of the
dimmer, as they are exposed during this step!
5. Flip the mounting bracket (back panel) around.
6. Reattach the panel by securely reinstalling the six Phillips-head screws.
DMX-4 User Manual Rev. 3
Page 7 of 14
OPERATION
4. OPERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Button Function
<MODE> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<MENU> Press to activate a menu option or a selected value
Dimmer or Switch Mode
The DMX-4 has two different methods for controlling the output of the four channels. To set this via the control panel,
do the following.
1. Unplug any units from the four output channels.
2. Connect the DMX-4 to a suitable power outlet.
3. Turn the product on.
4. Press <MODE> repeatedly until A001–A512 appears on the display.
5. Press <MENU> repeatedly until S1__, S2__, S3__, or S4__ appears on the display. This setting
can be set differently for each of the four channels. Navigate to the desired channel.
6. Use <UP> or <DOWN> to select either __oN (Switch mode) or __oF (Dimmer mode) for the
channel selected in the previous step.
7. Repeat steps 5 and 6 to set each of the other channels, if necessary.
Menu Map
Mode Menu Display Description
DMX Mode
Standalone
Mode
Starting
Address
Personality
Switch/Dimmer
Switch: oN
Dimmer: oF
Power Toggle SO00–SO30
Program P:01–P:16 Automatic programs
Run Speed SP:01–SP:99 Automatic program speeds Slow to fast
Dimmer d000–d100 0–100%
A001–A512 Selects the DMX starting address
CH:01 1-Channel mode
CH:02 2-Channel mode
CH:04 4-Channel mode
S1__ Channel 1 function
S2__ Channel 2 function
S3__ Channel 3 function
S4__ Channel 4 function
Turns power on/off as a DMX signal is detected.
Can assign up to a 30 second delay.
Page 8 of 14
DMX-4 User Manual Rev. 3
OPERATION
Configuration (DMX)
The DMX-4 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer , which is
available from the Chauvet website http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
DMX Personality and Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The DMX-4 uses up to 4 DMX channels in a 4CH DMX mode, which defines the highest configurable
address to 509.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until XXX shows on the display.
2. Press <ENTER> and XXX will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
DMX Values
4-Channel
Channel Function Value Percent/Setting
1 Dimmer 000 255 0-100%
2 Dimmer 000 255 0-100%
3 Dimmer 000 255 0-100%
4 Dimmer 000 255 0-100%
2-Channel
Channel Function Value Percent/Setting
1 Dimmer 000 255 Channels 1 + 2, 0-100%
2 Dimmer 000 255 Channels 3 + 4, 0-100%
1-Channel
Channel Function Value Percent/Setting
1 Dimmer 000 255 All four channels, 0-100%
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Programs
To run the DMX-4 in automatic mode, follow the instructions below:
1. Press <MODE> to switch between DMX mode and Standalone mode. Switch it to Standalone
mode.
2. Press <MENU> repeatedly until P:01–P:16 shows on the display.
3. Use <UP> or <DOWN> to select the desired Automatic program.
4. Press <MENU> repeatedly until SP:01–SP:99 shows on the display.
5. Use <UP> or <DOWN> to select the desired running speed.
6. Press <MENU> repeatedly until d000–d100 shows on the display.
7. Use <UP> or <DOWN> to select the desired dimmer level for the program currently running.
NOTE: There is no dimmer function if you select d000.
DMX-4 User Manual Rev. 3
Page 9 of 14
MAINTENANCE
5. MAINTENANCE
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear . To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Page 10 of 14
DMX-4 User Manual Rev. 3
TECHNICAL
6. TECHNICAL SPECIFICATIONS
Dimensions and Weight
LENGTH WIDTH HEIGHT WEIGHT
8.3 in (210 mm) 7.7 in (194 mm) 2.8 in (70 mm) 5 lb (2.2 kg)
Note: Dimensions in inches rounded to the nearest hundredth.
Power
POWER SUPPLY TYPE RANGE VOLTAGE SELECTION
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
PARAMETER MAX PER CHANNEL MAX TOTAL
Operating Current 5 A 15 A
Fuse F 7 A, 250 V F 7 A, 250 V
POWER I/O U.S./CANADA WORLDWIDE
Power input connector IEC IEC
Power output connector Edison IEC
Power Cord plug Edison (U.S.) Local Plug
Thermal
MAXIMUM EXTERNAL TEMPERATURE COOLING SYSTEM
104 °F (40 °C) Convection
DMX
Ordering
I/O CONNECTOR CHANNEL RANGE
3-pin XLR 1, 2, or 4
PRODUCT NAME ITEM CODE UPC NUMBER
DMX-4 09080140 781462206277
DMX-4 User Manual Rev. 3
Page 11 of 14
RETURNS
RETURNS
In case you need to get support or return a product:
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com for distributors outside the U.S., UK, Ireland, Mexico, or
Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet products to
them. Visit our website www.chauvetdj.com for contact details.
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
Page 12 of 14
DMX-4 User Manual Rev. 3
RETURNS
DMX-4 User Manual Rev. 3
Page 13 of 14
CONTACT US
World Headquarters
EUROPE
MEXICO
Address: Av. de las Partidas 34 - 3B, Zona
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email:
Fax: (954) 929-5560
Toll Free: (800) 762-1084 www.chauvetlighting.com
chauvetcs@chauvetlighting.com
Website
General Information Technical Support
Address: Stokstraat 18 Email: eutech@chauvetlighting.eu
9770 Kruishoutem
Belgium www.chauvetlighting.eu
Voice: +32 9 388 93 97
Website
General Information Technical Support
Address: Unit 1C Email: uktech@chauvetlighting.com
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT www.chauvetlighting.co.uk
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Website
General Information Technical Support
Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000 www.chauvet.com.mx
Email: servicio@chauvet.com.mx
Website
CONTACT US
Visit the applicable website above to verify our contact information and instructions to request support.
Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record.
Page 14 of 14
DMX-4 User Manual Rev. 3
Loading...