C6.6 with Bucket Capacities 0.38 to 1.26 m3 0.5 to 1.65 yd
ACERT™Technology
20100kg 44,313lb
Working Ranges
Maximum Reach at Ground Level 9600 mm 31'6"
Maximum Digging Depth 6360 mm 20'11"
Drive
Maximum Travel Speed 37 km/h 23 mph
3
Page 2
Features
Engine
TheEPA Tier 3 compliant C6.6 offers increased
performance and reliability while reducing fuel
consumption and sound levels.
Environmentally Responsible Design
Helping to protect our environment, the engine has
low operator and spectator sound levels, longer
lter change intervals and is more fuel-ef cient.
Hydraulics
The state of the art load-sensing hydraulic system
combined with a separate dedicated swing pump
provides fast cycle times, increased lift capacity
and high bucket and stick forces. This combination
maximizes your productivity in any job.
Serviceability
For increased safety, all daily maintenance points
are accessible from ground level. A centralized
greasing system allows lubrication of critical points.
Operator Comfort
The totally redesigned operator station maximizes
comfort while increasing safety. The available
auto-weight adjusted air-suspension seat with
heated and cooled ventilated cushions improves
operator comfort. Safety is enhanced by the new
color monitor and standard rear-mounted camera.
Undercarriage
Various undercarriage conguration with blade and
outriggers are available to provide the best solution
for you.
The D Series incorporates innovations for improved
performance and versatility.
Increased lifting capacity, improved cycle times and
ease of operation lead to increased productivity and
lower operating costs.
2
Page 3
Engine
Built for power, reliability, low maintenance, excellent fuel economy
andlow emissions.
Powerful Performance
The Cat® C6.6 engine with ACERT™ Technology introduces
a series of evolutionary, incremental improvements that
provide breakthrough engine performance. The building blocks
of ACERT Technology are fuel delivery, air management
and electronic control. ACERT Technology optimizes engine
performance while meeting EPA Tier 3 engine emission
regulations. The Cat C6.6 engine in the M318D delivers a
maximum gross power of 130 kW (174 hp) at a rated speed
of 1,800rpm.
Low Fuel Consumption
The C6.6 is electronically controlled and uses Cat Common
Rail Fuel System and fuel pump. This combination provides
outstanding fuel consumption during both production and
travel. When the system recognizes roading application the
engine will operate at the most efcient system operating
point to save fuel without compromising road performance.
Low Noise, Low Vibration
The Cat C6.6 design improves operator comfort by reducing
sound and vibration.
Cooling System
An electronically controlled, hydraulic motor drives a variable
speed on-demand fan for engine coolant and hydraulic oil.
The optimum fan speed is determined based on coolantand
hydraulic oil temperature resulting in reduced fuel consumption
and lower sound levels. The electronic engine control
continuously compensates for the varying fan load, providing
consistent net power, regardless of operating conditions.
One-Touch Low Idle Control
The two stage, one-touch Automatic Engine Speed
Control reduces engine speed if no operation is performed,
maximizing fuel efciency and reducing sound levels.
Waste Handling Package
The Waste Handling Package has been speci cally developed
for Cat Wheel Excavators working in waste transfer stations
or other extremely dusty applications. This option features
the following:
• An automatic, hydraulic reversible fan that reverses
airow after a set interval, manually adjustable between
5 and 60 minutes with a switch located inside the cab.
• A special dense wire mesh cooling system hood further
reduces radiator clogging.
• Two cyclone lters provide clean ltered air to the
engine compartment, air cleaner, aftercooler and air
conditioner condenser.
3
Page 4
Hydraulics
Load-sensing hydraulic system provides fast cycle times, increased lift capacity
and high bucket and stick forces to maximize your productivity in any job.
Dedicated Swing Pump
A dedicated variable displacement piston pump and xed
displacement piston motor power the swing drive. This closed
hydraulic circuit maximizes swing performance without
reducing power to the other hydraulic functions, resulting
insmoother combined movements.
Heavy Lift Mode
This mode maximizes lifting performance by boosting the
lifting capability of the excavator by 7%.
Adjustable Hydraulic Sensitivity
This function allows the operator to adjust the aggressiveness
of the machine according to the application. For precision work,
one of four different levels of aggressiveness can be preselected.
Proportional Auxiliary Hydraulics
Versatility of the hydraulic system can be expanded to utilize a
wide variety of hydraulic work tools using multiple valve options.
• The Multi-Combined Valve is the core of the Tool
Control System, allowing the operator to select up to ten
preprogrammed work tools from the monitor. These preset
hydraulic parameters support either one-way or two-way
ow. The joystick sliding switches allow modulated
control of the work tool.
• A dedicated Hammer circuit is the best option for tools
that require one-way ow only, and do not require the
exibility provided by the Multi-Combined Valve.
• The Medium Pressure Function Valve provides proportional
ow that is ideal for tilting buckets or rotating tools.
• A new feature for the D Series Wheel Excavators is the
optional second High Pressure valve. In combination
with the Multi-Combined Valve, it provides the
possibility to operate the machine with work tools or
in applications requiring a third auxiliary hydraulic
function, such as a tilting/rotating work tool.
Stick Regeneration Circuit
The stick regeneration circuit increases efciency and helps
increase controllability for higher productivity and lower
operating costs.
Quick Coupler
The machine can be optionally equipped with a dedicated
hydraulic circuit to operate hydraulic quick couplers.
Hydraulic Snubbers
Caterpillar integrates its cylinder snubber technology into all
Wheel Excavator boom and stick cylinders. These snubbers
help cushion shocks, reduce sound and increase cylinder life.
4
Page 5
SmartBoom™
Reduces stress and vibrations transmitted to the machine
and provides a more comfortable environment.
Rock Scraping Hammer Work Truck Loading
Scraping rock and nishing work is The front parts automatically follow Loading trucks from a bench is more
easy and fast. SmartBoom™ simpli es the hammer while penetrating the rock. productive and fuel ef cient as the return
the task and allows the operator to Blank shots or excessive force on the cycle is reduced while the boom down
concentrate on stick and bucket, while hammer are avoided resulting in longer function does not require pump ow.
boom freely goes up and down without life for the hammer and the machine.
using pump ow. Similar advantages with vibratory plate
compactors.
Environmentally Responsible Design
The M318D helps build a better world and preserve the fragile environment.
Fuel Ef ciency
The D Series Wheel Excavators are designed for outstanding
performance with high fuel ef ciency. This means more work
done in a day, less fuel consumed and minimal impact on
ourenvironment.
Low Exhaust Emissions
The new Cat® C6.6 engine meets the EPA Tier 3 emissions
regulations while offering increased performance, reliability
and reduced fuel consumption and sound levels.
Quiet Operation
Operator and spectator noise levels are extremely low asa
result of the new variable speed fan and remote cooling system.
Biodegradable Hydraulic Oil
The optional biodegradable hydraulic oil (Cat BIO HYDO
Advanced HEES™) is formulated to provide excellent
high-pressure and high temperature characteristics, and is fully
compatible with all hydraulic components. Cat BIO HYDO
Advanced HEES™ is fully decomposed by soil or water
microorganisms, providing a more environmentally sound
alternative to mineral-based oils.
Fewer Leaks and Spills
Lubricant llers and drains are designed to minimize spills.
Cat O-Ring Face Seals, Cat XT™ Hose and hydraulic cylinders
are all designed to help prevent uid leaks that can reduce the
machine performance and cause harm to the environment.
Longer Service Intervals
Working closely with your Cat dealer can help extend service
intervals for engine oil, hydraulic oil, axle oil and coolant.
Meaning fewer required uids and fewer disposal, alladding
up to lower operating costs.
5
Page 6
Operator Comfort
The interior layout maximizes operator space, provides exceptional
comfort and reduces operator fatigue.
Interior Operator Station
Improved visibility and ergonomics are some of the many
newfeatures of the D Series Wheel Excavators. The operator
station provides maximum space and is designed for simplicity
and functionality. Frequently used switches are centralized and
are situated on the right-hand switch console. The left-hand seat
console controls dozer blade and/or outriggers, and is tiltable
for easy access to the cab. The fully automatic climate control
adjusts temperature and air ow for exceptional operator comfort.
Other comfort features include a cigar lighter, ashtray, cup/can
holder, magazine rack and integrated mobile phone holder.
Cab Construction
The exterior design uses thick steel tubing along the bottom
perimeter of the cab, improving the resistance to fatigue and
vibration. This design allows the falling object guards to be
bolted directly to the cab. The cab shell is attached to the frame
with rubber mounts that limit vibration and sound transmitted
from the frame, substantially reducing interior noise levels.
Viewing Area
To maximize visibility, all glass is afxed directly to the cab,
eliminating the use of window frames. Choice of xed or easyto-open split front windshield meet operator preference and
application conditions.
• The 70/30 split front windshield stores the upper portion
above the operator. The lower front windshield features
a rounded design to maximize downward visibility and
improves wiper coverage. Also features the one-touch
action release system.
• The xed front windshield is high impact resistant
• A large skylight provides superb upward visibility.
laminated glass.
Theretractable sunscreen blocks direct sunlight.
Heated Mirrors
Another new feature is electrically heated mirrors, increasing
safety and visibility in cold conditions.
Wipers
The parallel wiper system maximizes visibility in poor
weather conditions. The wiper virtually covers the entire front
windshield, cleaning the operator’s immediate line of sight.
6
Page 7
Monitor
The new compact color monitor displays information
inlocallanguage that is easy to read and understand.
Functions include:
• 2 times 5 programmable “Quick Access” buttons for
one-touch selection of favorite functions.
• Filter and oil change warnings are displayed when the
number of hours reaches the maintenance interval.
• Tool select function allows the operator to select up to
10predened hydraulic work tools.
• Adjustable braking characteristics enable the operator to
select three levels of travel motor retarder aggressiveness
when releasing the travel pedal.
• Provides a rear camera view that is activated through the
monitor menu.
Deluxe Seat
The optional deluxe seat, equipped with an active seat climate
system, improves operator comfort. Cooled air ows through
the seat cushions to reduce body perspiration. On cold days, a
two-step seat heater keeps the operator warm and comfortable.
The fully adjustable seat with adjustable lumbar support
automatically adjusts to the driver’s weight providing a more
relaxed and comfortable environment.
Lunch Box
A large storage compartment is located behind the operator’s
seat. The compartment provides sufcient room to store
items such as a lunch box. A cover secures the contents
during machine operation.
Foot Pedals
Two-way pedals for travel and auxiliary circuits provide
increased oor space, reducing the need to change positions.
The foot pedal for auxiliary high-pressure circuit can be
locked in the off position and used as a footrest for greater
operator comfort.
Cat Standard Rearview Camera
The rearview camera displays on the operator monitor.
Together with the best in class visibility to the front, up, left
and right, the rearview camera ensures the safe operationof
the machine and fullls the requirements of ISO 5006/EN474.
Field of Vision
Cab post
front left
Cab post
middle left
Cab post
rear left rear right
Legend:
Red: limitations due to cab post and/or boom
Blue: additional visibility due to mirrors
Green: additional visibility due to rearview camera
Cab post
front right
Machine rear
and cab post
Boom
7
Page 8
Undercarriage
Undercarriage and axle design provides maximum strength,
exibilityandmobility on wheels.
Increased Travel Speed
The maximum travel speed for the M318D is 37 km/h (23mph), reducing travel time between sites
andincreasing productivity.
Heavy-Duty Axles and Stabilizers
The D Series Wheel Excavator undercarriage provides rigidity and long life. Effective hydraulic line
routing, transmission protection and heavy-duty axles make the undercarriage perfect for wheel
excavator applications. Thefront axle offers wide oscillating and steering angles. The transmission
ismounted directly ontherear axle for protection and optimum ground clearance.
Advanced Disc Brake System
The disc brake system acts directly on the hub instead of the drive shaft to avoid planetary gear
backlash. This solution minimizes the rocking effect associated with working free on wheels. The axle
design lowers maintenance and lifetime costs. Oilchange intervals are at 2,000 working hours, further
reducing owning and operating costs.
Fenders
The optional fenders provide excellent coverage of the front and rear tires, protecting the machine
from mud and dirt. Watercannot splash up on the windscreen or cooler. The fenders further protect
the machine from stones and debris being thrown up by the tires, providing additional safety for the
machine, other vehicles and personnel working close to the excavator.
8
Page 9
Booms and Sticks
Designed for maximum exibility to keep production high on all jobs.
Design
Booms and sticks are welded, box section structures with
thick, multiplate fabrications in high stress areas, for rugged
performance and long service life.
Flexibility
The choice of two booms and four sticks provides the right
balance of reach and digging forces for all applications.
Variable Adjustable (VA) Boom
The VA boom offers improved right side visibility and
machine roading balance. When working in tight quarters or
lifting heavy loads, the VA boom offers the best performance.
One-Piece Boom
The one-piece boom ts best for all standard applications
such as truck loading and digging. A unique straight section
in the curve of the side plate reduces stress ow and helps
increase boom life.
Sticks
Four different stick lengths are offered to match different
application requirements:
• Short stick (2200 mm [7 ft 3 in]) for maximum breakout
force andlifting capability.
• Medium stick (2500 mm [8 ft 3 in]) for greater crowd
force andliftcapacity.
• Long stick (2800 mm [9 ft 3 in]) for greater depth and
reach requirements.
• Industrial stick (3300 mm [10 ft 10 in]) for use with
free-swinging grapples in material handling and
industrial applications.
9
Page 10
Work Tools
A wide variety of Work Tools help optimize machine performance.
Work Tools
Cat work tools are designed to function as an integral
part of your excavator and to provide the best possible
performance in your particular application. All work tools
areperformance-matched to Cat machines.
Quick Couplers
Quick Couplers enable the operator to simply release one
work tool and connect to another, making your hydraulic
excavator highly versatile. Productivity also increases, as a
1
carrier no longer needs to be idle between jobs. Caterpillar
offers hydraulic and spindle quick coupler versions.
Buckets
Caterpillar offers a wide range of specialized buckets, each
designed and tested to function as an integral part of your
excavator. Buckets feature the new Cat K Series™ Ground
Engaging Tools.
4
2
5
3
Excavation (X)
1
Extreme Excavation (EX)
2
Excavation Leveling
3
Ditch Cleaning
4
Quick Coupler
5
10
Page 11
Purpose designed and built to Caterpillar’s high durability standards.
Hammers
Cat® hammer series deliver very high blow rates, increasing
the productivity of your tool carriers in demolition and
construction applications. Wide oil ow acceptance ranges
make the Cat hammers suitable for a wide range of carriers
and provide a system solution from one safe source.
Orange Peel Grapples
The Orange Peel Grapple is constructed of high-strength,
wear-resistant steel, with a low and compact design that
makes it ideal for dump clearance. There are several choices
of tine and shell versions.
Multi-Processors
Thanks to its single basic housing design, the Multi- Processor
series of hydraulic demolition equipment makes it possible
to use a range of jaw sets that can handle any demolition job.
The Multi-Processor is the most versatile demolition tool on
the market.
Vibratory Plate Compactors
Cat compactors are performance-matched to Cat machines,
and integrate perfectly with the Cat hammer line – brackets
and hydraulic kits are fully interchangeable between hammers
and compactors.
Shears
Cat shears provide superior and effective scrap processing,
and are highly productive in demolition environments.
Shearsare compatible with a matching Cat excavator, and
bolt-on brackets are available for either stick or boommounted options.
11
Page 12
Serviceability and
CompleteCustomer Support
Ground Level Maintenance
Caterpillar designed its D Series Wheel Excavators with the
operator and service technician in mind. Gull-wing doors,
with pneumatically-assisted lift cylinders, effortlessly lift up
to allow critical maintenance to be performed quickly and
efciently while maintaining operator safety.
Extended Service Intervals
The D Series Wheel Excavator service and maintenance
intervals have been extended to reduce machine service time,
increase machine availability and reduce operating costs.
Using S·O·S
oilchange intervals can be extended up to 6,000 hours.
Engine Oil
Cat engine oil is formulated to optimize engine life and
performance. The specially formulated oil is more cost
effective and increases engine oil change interval to 500 hours,
providing industry leading performance and savings.
SM
Scheduled Oil Sampling analysis, hydraulic
Air Filters
Cat air lters eliminate the use of service tools, reducing
maintenance time. The air lter features a double-element
construction with wall ow ltration in the main element
and built-in mini-cyclone precleaners for superior cleaning
efciency. The air lters are constantly monitored for
optimum performance. If airow becomes restricted,
awarning is displayed by the way of the in-cab monitor.
Capsule Filter
The hydraulic return lter, a capsule lter, prevents contaminants
from entering the system when the hydraulic oil is changed.
Fuel Filters
Cat high efciency fuel lters with a Stay-Clean Valve™
features a special media that removes more than 98% of
particles, increasing fuel injector life. Both the primary and
secondary fuel lters are located in the engine compartment
and can be easily changed from ground level.
Water Separator
The D Series is equipped with a primary fuel lter with
water separator located in the engine compartment. For ease
of service, the water separator can be easily accessed from
ground level.
12
Fuel Tank Drain
The durable, corrosion-free tank has a remote drain located at
the bottom of the upper frame to remove water and sediment.
The tank drain with hose connection allows simple, spill-free
uid draining.
Page 13
Simplied and easy maintenance save you time and money.
Cat®dealerservices help you operate longer with lower costs.
Front Compartment
The front compartment hood can be opened vertically,
providing outstanding ground level access to the batteries,
air-to-air aftercooler, air conditioner condenser and the
engine air lter.
Swing-out Air Conditioner Condenser
The air conditioning condenser swings out horizontally to
allow complete cleaning on both sides as well as excellent
access to the air-to-air aftercooler.
Scheduled Oil Sampling
Caterpillar has specially developed S·O·SSM Oil Sampling
Analysis to help ensure better performance, longer life and
increased customer satisfaction. This thorough and reliable
early warning system detects traces of metals, dirt and other
contaminants in your engine, axle and hydraulic oil. It can
predict potential trouble avoiding costly failures. Your Cat
dealer can give you results and speci c recommendations
shortly after receiving your sample.
Engine Inspection
The engine can be accessed from both ground level and the
upper structure. The longitudinal layout ensures that all daily
inspection items can be accessed from ground level.
Anti-Skid Plates
They cover the top of the steps and upper structure to help
prevent slipping during maintenance. The Anti-Skid plates
reduce the accumulation of mud on the upper structure,
improving the cleanliness and safety.
Easy to Clean Coolers
Flat ns on all coolers reduce clogging, making it easier
toremove debris. The main cooling fan and air conditioner
condenser are both hinged for easier cleaning.
Remote Greasing Blocks
For those hard to reach locations, greasing blocks have been
provided to reduce maintenance time.
Handrails and Steps
Large handrails and steps assist the operator in climbing
onand off the machine.
LED Rear Lights
Standard Light Emitting Diode (LED) rear lights provide
increased visibility on the job site, higher durability and
longer life.
13
Page 14
Versatility
A wide variety of optional factory-installed attachments are available
toenhance performance and improve job site management.
Tool Control
The integrated Tool Control system allows the operator to
select up to 10 preset combinations. This eliminates the need
to reset the hydraulic parameters each time a tool is changed.
Individual ow and pressure can be programmed easily as
wellas one-way/two-way hydraulic functions. Each of the tenprogrammed tools can even be given a specic name. The unique
Cat proportional sliding switches and optional auxiliary pedal
provide modulation to the tool to make precision work easy.
Joystick Steering
The unique joystick steering option enables an operator to
reposition the machine while traveling in rst gear by the use of
the slider switch on the right joystick. This enables the operator
to keep both hands on the joysticks while simultaneously moving
the implements and traveling. The operator can do more
precise work faster with increased safety around the machine.
Working and Travel Modes
There are 2 selectable working modes and one automatic
travel setting. The operator can choose the best power setting
for both engine and hydraulic power versus fuel ef ciency.
• Economy Mode – used for lifting, pipe setting, grading,
slope nishing and precise work while reducing fuel
consumption.
• Power Mode – used for normal truck loading and digging
applications, trenching or hammer use.
• Travel Mode – automatically set when the travel pedal is
actuated. It provides maximum speed and drawbar pull.
Product Link
Product Link allows remote monitoring of the machine, using
a powerful telemetric system to transmit needed information
to the customer and the dealer via a secure, web-based
application, VisionLink™.
Critical information, such as event and diagnostic codes,is
readily accessible, as are machine statistics, such as hour-meter
reading, fuel consumption and idle time. Mapping functions
include location and geo-fencing, which assist in servicing
operations and in preventing unauthorized machine use. With
Product Link, the customer and the dealer have an invaluable
tool formore efciently managing machines and eets.
14
Ride Control
The ride control system improves operator comfort and allows
the machine to travel faster over rough terrain with improved
ride quality for the operator. Theride control system features
accumulators acting as shock absorbers to dampen the front
part motion. Ride control can be activated through a button
located on the soft switch panel in the cab.
Page 15
M318D Wheel Excavator Specications
Engine Weights Tires
Engine Model Cat® C6.6 VA Boom*
withACERT™
Technology
Ratings
Gross Power 130 kW 174 hp
Net Power Rear Outriggers
ISO 9249 124 kW 166 hp One-Piece Boom*
80/1269/EEC 124 kW 166 hp Rear Dozer Only 17 350 kg 38,250 lb
Bore 105 mm 4.13 in
Stroke 127 mm 5 in
Displacement 6.6 L 403 in
Cylinders 6
Maximum Torque 805 N·m 596 lb ft
at1,400rpm
• EPA Tier 3 compliant.
• Full engine net power up to 3000 m
(1.86mi) altitude.
* Industrial stick has no bucket linkage. All dimensions refer to sticknose.
Values 1-7 are calculated with bucket and quick coupler with a tip radius of 1599 mm (5'3").
Breakout force values are calculated with heavy lift on (no quick coupler) and a tip radius of 1405 mm (4'7").
17
Page 18
M318D Wheel Excavator Specications
Bucket Specifications
Contact your Cat dealer for special bucket requirements.
Variable Adjustable Boom
Pin-On Buckets
Stick Length 2200 mm (7'3") 2500 mm (8'3") 2800 mm (9'3")
5260 mm (17'3")
Excavation
Extreme Excavation
Excavation (leveling)
Extreme Excavation (leveling)
Ditch Cleaning
Tiltable Ditch Cleaning
Width
mm in kg lb m
Weight*
Capacity (ISO)
3
3
yd
600 24 478 1,054 0.38 0.50 3
750 30 507 1,118 0.52 0.68 3
900 35 568 1,252 0.65 0.85 4
1000 39 602 1,327 0.75 0.98 4
1100 43 634 1,398 0.84 1.10 4
1200 47 678 1,495 0.94 1.23 5
1300 51 710 1,566 1.03 1.35 5
1400 55 744 1,641 1.13 1.48 5
1200 47 712 1,570 0.94 1.23 5
1300 51 745 1,643 1.03 1.35 5
600 24 514 1,133 0.41 0.54 3
750 30 544 1,200 0.56 0.73 3
800 31 582 1,283 0.61 0.80 4
900 35 611 1,347 0.70 0.92 4
1000 39 651 1,435 0.82 1.07 4
1100 43 687 1,515 0.92 1.20 4
1200 47 740 1,632 1.04 1.36 5
1300 51 777 1,713 1.14 1.49 5
1400 55 813 1,793 1.26 1.65 5
1200 47 772 1,702 1.04 1.36 5
1300 51 809 1,784 1.14 1.49 5
1800 71 630 1,389 0.90 1.18
2000 79 685 1,510 1.00 1.31
1800 71 875 1,929 0.75 0.98
2000 79 912 2,011 0.84 1.10
Adapters
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
* Bucket weight includes Ground Engaging Tools
18
Maximum material density
1800 kg/m3 (3,000 lb/yd3) 1200 kg/m3 (2,000 lb/yd3)
Maximum material density
3
(2,500 lb/yd3)
1500 kg/m
Maximum material density
Not recommended
Page 19
Bucket Specifications
Contact your Cat dealer for special bucket requirements.
One-Piece Boom
Pin-On Buckets
Stick Length 2200 mm (7'3") 2500 mm (8'3") 2800 mm (9'3")
5350 mm (17'7")
Excavation
Extreme Excavation
Excavation (leveling)
Extreme Excavation (leveling)
Ditch Cleaning
Tiltable Ditch Cleaning
Width
mm in kg lb m
Weight*
Capacity (ISO)
3
3
yd
600 24 478 1,054 0.38 0.50 3
750 30 507 1,118 0.52 0.68 3
900 35 568 1,252 0.65 0.85 4
1000 39 602 1,327 0.75 0.98 4
1100 43 634 1,398 0.84 1.10 4
1200 47 678 1,495 0.94 1.23 5
1300 51 710 1,566 1.03 1.35 5
1400 55 744 1,641 1.13 1.48 5
1200 47 712 1,570 0.94 1.23 5
1300 51 745 1,643 1.03 1.35 5
600 24 514 1,133 0.41 0.54 3
750 30 544 1,200 0.56 0.73 3
800 31 582 1,283 0.61 0.80 4
900 35 611 1,347 0.70 0.92 4
1000 39 651 1,435 0.82 1.07 4
1100 43 687 1,515 0.92 1.20 4
1200 47 740 1,632 1.04 1.36 5
1300 51 777 1,713 1.14 1.49 5
1400 55 813 1,793 1.26 1.65 5
1200 47 772 1,702 1.04 1.36 5
1300 51 809 1,784 1.14 1.49 5
1800 71 630 1,389 0.90 1.18
2000 79 685 1,510 1.00 1.31
1800 71 875 1,929 0.75 0.98
2000 79 912 2,011 0.84 1.10
Adapters
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
Free on wheels
Dozer lowered
1 set of stabilizer lowered
Fully stabilized
* Bucket weight includes Ground Engaging Tools
Maximum material density
1800 kg/m3 (3,000 lb/yd3) 1200 kg/m3 (2,000 lb/yd3)
Maximum material density
3
(2,500 lb/yd3)
1500 kg/m
Maximum material density
Not recommended
19
Page 20
M318D Wheel Excavator Specications
Work Tools Matching Guide
When choosing between various work tool models that can be installed onto the same machine configuration,
consider work tool application, productivity requirements, and durability. Refer to work tool specifications for
application recommendations and productivity information.
Variable Adjustable Boom One-Piece Boom
5260 mm (17'3") 5350 mm (17'7")
Without Quick Coupler
Stick Length (mm)
Stick Length (ft/in)
Hammers H115 S, H120C S, H130 S
MP15 CC, CR
MP15 PP, PS
Multiprocessors
MP15 S
MP20 CC, CR
MP20 PP, PS, S
Hydraulic Shears
(* boom mounted)
S320B
S320B*
S325B*
Compactor CVP75
400 L (0.53 yd
GSH15B
4 tines
500 L (0.66 yd
600 L (0.79 yd
800 L (1.05 yd
GSH20B
4 tines
600 L (0.79 yd
800 L (1.05 yd
1000 L (1.3 yd
Dozer
lowered
2800
2200
2500
9'3"
7'3"
8'3"
3
)
3
)
3
)
3
)
3
)
3
)
3
)
of stabilizers
3300
2200
10'10"
7'3"
2 sets
lowered
2500
8'3"
2800
9'3"
360° Working Range Maximum material density 3000 kg/m
Over the front only Maximum material density 1800 kg/m3 (3,000 lb/yd3)
and stabilizer
lowered
3300
2200
10'10"
7'3"
Dozer
Dozer
lowered
2500
2800
3300
2200
2500
2800
3300
8'3"
9'3"
10'10"
7'3"
8'3"
9'3"
10'10"
Maximum material density 1200 kg/m3 (2,000 lb/yd3)
2 sets
of stabilizers
lowered
2200
2500
2800
7'3"
8'3"
9'3"
and stabilizer
lowered
3300
2200
10'10"
7'3"
3
(5,000 lb/yd3)
Dozer
2500
8'3"
2800
9'3"
3300
10'10"
20
Page 21
Lift Capacities – Variable Adjustable Boom (5260 mm [17'3"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Short
Stick
2200 mm
(7'3")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Short
Stick
2200 mm
(7'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb *14,600 12,500 10,900 10,800 7,700 6,700 *9,600 7,500 6,500
Rear dozer down lb *14,600 12,400 *10,900 7,700 *9,600 7,500
Dozer and stabilizer down lb *14,600 *14,600 *10,900 *10,900 *9,600 *9,600
20.0 ft
2 sets of stabilizers down lb *14,600 *14,600 *14,600 *10,900 *10,900 *10,900 *9,600 *9,600 *9,600
Wide axle rear dozer up lb 12,500 11,900 7,700 7,300 7,500 7,100
Rear dozer up lb *16,500 11,900 10,300 10,700 7,600 6,600 8,400 5,900 5,100
Rear dozer down lb *16,500 11,800 *13,900 7,600 *9,200 5,900
Dozer and stabilizer down lb *16,500 *16,500 *13,900 11,200 *9,200 8,800
15.0 ft
2 sets of stabilizers down lb *16,500 *16,500 *16,500 *13,900 *13,900 13,000 *9,200 *9,200 *9,200
Wide axle rear dozer up lb 11,900 11,300 7,600 7,200 5,900 5,700
Rear dozer up lb 15,900 10,900 9,400 10,300 7,200 6,300 7,500 5,200 4,500
Rear dozer down lb *19,600 10,900 *15,000 7,200 *9,300 5,200
Dozer and stabilizer down lb *19,600 16,800 *15,000 10,800 *9,300 7,900
10.0 ft
2 sets of stabilizers down lb *19,600 *19,600 *19,600 *15,000 *15,000 12,600 *9,300 *9,300 9,100
Wide axle rear dozer up lb 11,000 10,400 7,200 6,900 5,200 5,000
Rear dozer up lb 15,000 10,100 8,600 9,900 6,800 5,900 7,200 4,900 4,300
Rear dozer down lb *21,900 10,000 15,400 6,800 *9,900 5,000
Dozer and stabilizer down lb *21,900 15,800 15,600 10,400 *9,900 7,500
5.0 ft
2 sets of stabilizers down lb *21,900 *21,900 18,800 *16,000 15,900 12,100 *9,900 *9,900 8,800
Wide axle rear dozer up lb 10,100 9,600 6,800 6,500 5,000 4,700
Rear dozer up lb 14,600 9,700 8,200 9,600 6,600 5,600 7,400 5,100 4,400
Rear dozer down lb *22,000 9,600 15,000 6,500 *11,100 5,100
Dozer and stabilizer down lb *22,000 15,400 15,300 10,100 *11,100 7,800
0.0 ft
2 sets of stabilizers down lb *22,000 *22,000 18,300 *16,100 15,600 11,800 *11,100 *11,100 9,000
Wide axle rear dozer up lb 9,700 9,200 6,600 6,200 5,100 4,800
Lift Capacities – Variable Adjustable Boom (5260 mm [17'3"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Medium
Stick
2500 mm
(8'3")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Medium
Stick
2500 mm
(8'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb *13,700 12,600 11,000 11,000 7,800 6,800 *7,400 6,800 5,900
Rear dozer down lb *13,700 12,600 *11,500 7,800 *7,400 6,800
Dozer and stabilizer down lb *13,700 *13,700 *11,500 11,500 *7,400 *7,400
20.0 ft
2 sets of stabilizers down lb *13,700 *13,700 *13,700 *11,500 *11,500 *11,500 *7,400 *7,400 *7,400
Wide axle rear dozer up lb 12,700 12,000 7,800 7,500 6,800 6,500
Rear dozer up lb *15,700 12,100 10,500 10,800 7,600 6,700 *7,000 5,500 4,800
Rear dozer down lb *15,700 12,000 *13,400 7,600 *7,000 5,500
Dozer and stabilizer down lb *15,700 *15,700 *13,400 11,300 *7,000 *7,000
15.0 ft
2 sets of stabilizers down lb *15,700 *15,700 *15,700 *13,400 *13,400 13,100 *7,000 *7,000 *7,000
Wide axle rear dozer up lb 12,100 11,500 7,700 7,300 5,500 5,300
Lift Capacities – Variable Adjustable Boom (5260 mm [17'3"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Long
Stick
2800 mm
(9'3")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Long
Stick
2800 mm
(9'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb 11,100 8,000 7,000 *6,400 6,300 5,500
Rear dozer down lb *11,200 7,900 *6,400 6,300
Dozer and stabilizer down lb *11,200 *11,200 *6,400 *6,400
20.0 ft
2 sets of stabilizers down lb *11,200 *11,200 *11,200 *6,400 *6,400 *6,400
Wide axle rear dozer up lb 8,000 7,600 6,300 6,000
Lift Capacities – Variable Adjustable Boom (5260 mm [17'3"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Industrial
Stick
3300 mm
(10'10")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Industrial
Stick
3300 mm
(10'10")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface and the Variable Boom Cylinder adjusted to the maximum length. For lifting capacity including bucket and/or
quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb *10,800 8,700 7,700 *6,900 6,500 5,800
Rear dozer down lb *10,800 8,700 *6,900 6,500
Dozer and stabilizer down lb *10,800 *10,800 *6,900 *6,900
20.0 ft
2 sets of stabilizers down lb *10,800 *10,800 *10,800 *6,900 *6,900 *6,900
Wide axle rear dozer up lb 8,700 8,300 6,500 6,300
Lift Capacities – One-Piece Boom (5350 mm [17'7"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Short
Stick
2200 mm
(7'3")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Short
Stick
2200 mm
(7'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb 10,800 7,700 6,800 *9,900 7,400 6,500
Rear dozer down lb *11,400 7,700 *9,900 7,400
Dozer and stabilizer down lb *11,400 11,300 *9,900 *9,900
20.0 ft
2 sets of stabilizers down lb *11,400 *11,400 *11,400 *9,900 *9,900 *9,900
Wide axle rear dozer up lb 7,700 7,400 7,400 7,100
Rear dozer up lb *16,100 11,800 10,300 10,600 7,500 6,600 8,300 5,900 5,200
Rear dozer down lb *16,100 11,700 *13,600 7,500 *9,600 5,900
Dozer and stabilizer down lb *16,100 *16,100 *13,600 11,100 *9,600 8,700
15.0 ft
2 sets of stabilizers down lb *16,100 *16,100 *16,100 *13,600 *13,600 12,800 *9,600 *9,600 *9,600
Wide axle rear dozer up lb 11,800 11,200 7,600 7,200 5,900 5,700
Rear dozer up lb 15,800 10,900 9,400 10,200 7,200 6,300 7,400 5,200 4,500
Rear dozer down lb *19,500 10,800 *14,800 7,200 *9,900 5,200
Dozer and stabilizer down lb *19,500 16,600 *14,800 10,700 *9,900 7,800
10.0 ft
2 sets of stabilizers down lb *19,500 *19,500 *19,500 *14,800 *14,800 12,400 *9,900 *9,900 9,000
Wide axle rear dozer up lb 10,900 10,300 7,200 6,900 5,200 5,000
Rear dozer up lb 14,900 10,100 8,700 9,900 6,800 5,900 7,100 5,000 4,300
Rear dozer down lb *22,000 10,100 15,200 6,800 *10,600 5,000
Dozer and stabilizer down lb *22,000 15,700 15,400 10,300 *10,600 7,500
5.0 ft
2 sets of stabilizers down lb *22,000 *22,000 18,600 *16,000 15,800 12,000 *10,600 *10,600 8,700
Wide axle rear dozer up lb 10,100 9,600 6,800 6,500 5,000 4,800
Rear dozer up lb 14,500 9,700 8,300 9,600 6,600 5,700 7,300 5,100 4,400
Rear dozer down lb *22,300 9,700 14,900 6,600 11,000 5,100
Dozer and stabilizer down lb *22,300 15,300 15,100 10,100 11,300 7,700
0.0 ft
2 sets of stabilizers down lb *22,300 *22,300 18,200 *16,300 15,500 11,800 *12,200 11,600 8,900
Wide axle rear dozer up lb 9,800 9,200 6,600 6,300 5,100 4,900
Lift Capacities – One-Piece Boom (5350 mm [17'7"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Medium
Stick
2500 mm
(8'3")
Undercarriage configuration
Rear dozer up
Rear dozer down
Dozer and stabilizer down
6.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
4.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
0.0 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–1.5 m
2 sets of stabilizers down
Wide axle rear dozer up
Rear dozer up
Rear dozer down
Dozer and stabilizer down
–3.0 m
2 sets of stabilizers down
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
Medium
Stick
2500 mm
(8'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb 10,900 7,800 6,900 *7,700 6,800 6,000
Rear dozer down lb *11,600 7,800 *7,700 6,800
Dozer and stabilizer down lb *11,600 11,400 *7,700 *7,700
20.0 ft
2 sets of stabilizers down lb *11,600 *11,600 *11,600 *7,700 *7,700 *7,700
Wide axle rear dozer up lb 7,800 7,500 6,800 6,500
Rear dozer up lb 10,700 7,600 6,700 *7,400 5,500 4,800
Rear dozer down lb *13,100 7,600 *7,400 5,500
Dozer and stabilizer down lb *13,100 11,200 *7,400 *7,400
15.0 ft
2 sets of stabilizers down lb *13,100 *13,100 12,900 *7,400 *7,400 *7,400
Wide axle rear dozer up lb 7,600 7,300 5,500 5,300
Lift Capacities – One-Piece Boom (5350 mm [17'7"])
All values are without bucket and without QC, with counterweight (4000 kg [8,810 lb]), heavy lift on.
Load at maximum reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height
Long
Stick
2800 mm
(9'3")
3.0 m 4.5 m 6.0 m 7.5 m
Undercarriage configuration
Rear dozer up kg 5150 3700 3250 *3050 2800 2500
Rear dozer down kg *5200 3700 *3050 2800
Dozer and stabilizer down kg *5200 *5200 *3050 *3050
6.0 m
2 sets of stabilizers down kg *5200 *5200 *5200 *3050 *3050 *3050
Wide axle rear dozer up
Rear dozer up kg 5000 3600 3150 3500 2500 2150 *2950 2350 2050
Rear dozer down kg *5750 3600 *4050 2500 *2950 2350
Dozer and stabilizer down kg *5750 5250 *4050 3650 *2950 *2950
4.5 m
2 sets of stabilizers down kg *5750 *5750 *5750 *4050 *4050 *4050 *2950 *2950 *2950
Wide axle rear dozer up
Rear dozer up kg 7500 5200 4500 4800 3400 2950 3450 2400 2100 3000 2100 1850
Rear dozer down kg *8350 5150 *6450 3400 5100 2400 *3000 2100
Dozer and stabilizer down kg *8350 7900 *6450 5050 5200 3600 *3000 *3000
3.0 m
2 sets of stabilizers down kg *8350 *8350 *8350 *6450 *6450 5850 *5550 5350 4150 *3000 *3000 *3000
Wide axle rear dozer up
Rear dozer up kg 7050 4800 4100 4600 3200 2800 3350 2300 2000 2900 2000 1750
Rear dozer down kg *9800 4750 7100 3200 5000 2350 *3200 2050
Dozer and stabilizer down kg *9800 7450 *7150 4850 5100 3500 *3200 3050
1.5 m
2 sets of stabilizers down kg *9800 *9800 8800 *7150 *7150 5650 *5800 5250 4050 *3200 *3200 *3200
Wide axle rear dozer up kg 4800 4550 3200 3050 2350 2200 2000 1950
Rear dozer up kg 6800 4550 3900 4450 3050 2650 3250 2250 1950 3000 2050 1800
Rear dozer down kg *10 350 4550 6950 3050 4900 2250 *3600 2050
Dozer and stabilizer down kg *10 350 7150 7050 4700 5050 3450 *3600 3100
0.0 m
2 sets of stabilizers down kg *10 350 *10 350 8500 *7500 7200 5500 *5850 5150 4000 *3600 *3600 *3600
Wide axle rear dozer up
Rear dozer up kg *9000 8400 6900 6700 4500 3800 4400 3000 2600 3250 2250 1950
Rear dozer down kg *9000 8300 *9950 4450 6850 3000 *4250 2250
Dozer and stabilizer down kg *9000 *9000 *9950 7100 7000 4650 *4250 3400
–1.5 m
2 sets of stabilizers down kg *9000 *9000 *9000 *9950 *9950 8400 *7300 7150 5400 *4250 *4250 3950
Wide axle rear dozer up
Rear dozer up kg *11 850 8550 7050 6750 4500 3850 4450 3050 2600 3900 2700 2350
Rear dozer down kg *11 850 8400 *8600 4500 *6250 3050 *5250 2700
Dozer and stabilizer down kg *11 850 *11 850 *8600 7150 *6250 4650 *5250 4100
–3.0 m
2 sets of stabilizers down kg *11 850 *11 850 *11 850 *8600 *8600 8450 *6250 *6250 5450 *5250 *5250 4800
Wide axle rear dozer up
Rear dozer up kg *5650 4700 4050 *4600 4000 3450
Rear dozer down kg *5650 4700 *4600 3950
Dozer and stabilizer down kg *5650 *5650 *4600 *4600
–4.5 m
2 sets of stabilizers down kg *5650 *5650 *5650 *4600 *4600 *4600
Wide axle rear dozer up
kg
kg
kg
kg
kg
kg
kg
8450 7800 4500 4250 3000 2850 2250 2150
8550 7950 4550 4300 3050 2900 2700 2550
5200 4950 3400 3250 2400 2300 2100 2000
4550 4300 3050 2950 2250 2150 2050 1950
4700 4450 4000 3800
3700 3550 2800 2700
3600 3450 2500 2400 2350 2250
m
7.00
7.73
8.12
8.21
8.01
7.50
6.60
5.09
Long
Stick
2800 mm
(9'3")
* Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb 11,000 7,900 7,000 *6,700 6,300 5,500
Rear dozer down lb *11,200 7,900 *6,700 6,300
Dozer and stabilizer down lb *11,200 *11,200 *6,700 *6,700
20.0 ft
2 sets of stabilizers down lb *11,200 *11,200 *11,200 *6,700 *6,700 *6,700
Wide axle rear dozer up lb 7,900 7,600 6,300 6,100
Rear dozer up lb 10,800 7,700 6,800 7,500 5,300 4,700 *6,500 5,200 4,600
Rear dozer down lb *12,600 7,700 *7,600 5,300 *6,500 5,200
Dozer and stabilizer down lb *12,600 11,300 *7,600 *7,600 *6,500 *6,500
15.0 ft
2 sets of stabilizers down lb *12,600 *12,600 *12,600 *7,600 *7,600 *7,600 *6,500 *6,500 *6,500
Wide axle rear dozer up lb 7,700 7,400 5,300 5,100 5,200 5,000
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Undercarriage configuration
Rear dozer up lb *7,100 6,600 5,800
Rear dozer down lb *7,100 6,600
Dozer and stabilizer down lb *7,100 *7,100
20.0 ft
2 sets of stabilizers down lb *7,100 *7,100 *7,100
Wide axle rear dozer up lb 6,600 6,300
Rear dozer up lb 11,500 8,400 7,500 8,200 6,000 5,300 *7,100 5,600 4,900
Rear dozer down lb *12,300 8,400 *9,300 6,000 *7,100 5,600
Dozer and stabilizer down lb *12,300 12,000 *9,300 8,600 *7,100 *7,100
15.0 ft
2 sets of stabilizers down lb *12,300 *12,300 *12,300 *9,300 *9,300 *9,300 *7,100 *7,100 *7,100
Wide axle rear dozer up lb 8,400 8,100 6,000 5,800 5,600 5,400
Rear dozer up lb *21,400 19,500 16,300 *15,400 10,600 9,200 12,100 8,500 7,400
Rear dozer down lb *21,400 19,300 *15,400 10,600 *12,500 8,500
Dozer and stabilizer down lb *21,400 *21,400 *15,400 *15,400 *12,500 *12,500
–15.0 ft
2 sets of stabilizers down lb *21,400 *21,400 *21,400 *15,400 *15,400 *15,400 *12,500 *12,500 *12,500
Wide axle rear dozer up lb 19,600 18,200 10,600 10,100 8,500 8,100
10.0 ft 15.0 ft 20.0 ft 25.0 ft
28
ft
23.75
26.18
27.46
27.79
27.13
25.49
22.57
17.75
Page 29
M318D Wheel Excavator Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
Electrical
Alternator, 75 A
Lights
Boom working light
Cab interior light
Roading lights two front
Roading lights two LED modules rear
Rotating beacon on cab
Working lights, cab mounted
(front and rear)
Main shut-off switch
Maintenance free batteries
Signal/warning horn
Engine
Automatic engine speed control
Automatic starting aid
Cat C6.6 with ACERT Technology
EPA Tier 3 compliant
Fuel/water separator with level indicator
Hydraulics
Heavy lift mode
Load-sensing Plus hydraulic system
Manual work modes (economy, power)
Separate swing pump
Stick regeneration circuit
Operator Station
ROPS cab structure compliant with
2006/42/EC and tested according
toISO12117-2:2008
Adjustable armrests
Air conditioner, heater and defroster
withautomatic climate control
Ash tray with cigarette lighter (24 volt)
Beverage cup/can holder
Bolt-on FOGS capability
Bottle holder
Bottom mounted parallel wiping system
that covers the upper and lower
windshield glass
Camera mounted on counterweight displays
through cab monitor
Coat hook
Floor mat, washable, with storage
compartment
Fully adjustable mechanical suspension seat
Instrument panel and gauges
Information and warning messages
inlocal language
Gauges for fuel level, engine coolant
andhydraulic oil temperature
Filters/uids change interval
Indicators for headlights, turning signal,
low fuel, engine dial setting
Clock with 10-day backup battery
Laminated front windshield
Left side console, tiltable, with lock out
forall controls
Literature compartment behind seat
Literature holder in right console
Mobile phone holder
Parking brake
Positive ltered ventilation
Power supply, 12V-7A
Rear window, emergency exit
Retractable seat belt
Skylight
Sliding door windows
Steering column, tiltable
Storage area suitable for a lunch box
Sunshade for windshield and skylight
Undercarriage
Heavy-duty axles, advanced travel motor,
adjustable braking force
Oscillating front axle with remote greasing
Tires, 10.00-20 16 PR, dual
Tool boxes (right- and left-hand side)
inundercarriage
Two-piece drive shaft
Other Equipment
Automatic swing brake
Counterweight, 4000 kg (8,810 lb)
Mirrors, frame and cab
Product Link ready
Tool box in upperframe, lockable
29
Page 30
M318D Wheel Excavator Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
Auxiliary Controls and Lines
Auxiliary boom and stick lines
Anti-drift valves for bucket, stick, VAboom
and tool control/multi-function circuits
Basic control circuits:
Single action
One-way, high pressure circuit,
forhammering application
Medium pressure
Two-way, medium pressure circuit,
forrotating or tilting of work tools
Tool control/multi function
One/two-way high pressure for hammer
application or opening and closing
ofa work tool
Programmable ow and pressure for up
to 10 work tools – selection via monitor
Second high pressure
Additional two-way, high pressure
circuit, for tools requiring a second
high or medium pressure function
Quick coupler control
Cat BIO HYDO Advanced HEES™
biodegradable hydraulic oil
Generator with valve and priority function
Lowering control devices for boom
andstick
SmartBoom™
Front Linkage
Booms
One-piece boom, 5350 mm (17 ft 7 in)
VA boom (two piece), 5260 mm
(17 ft 3 in)
Bucket linkage with diverter valve
Sticks
Adjustable hydraulic sensitivity
CD/MP3 Radio (12V) at rear location
including speakers and 12V converter
Falling objects guard
Joystick steering
Seat, adjustable high-back
– air suspension (vertical)
– deluxe with headrest, air suspension
Travel speed lock
Vandalism guards
Visor for rain protection
Windshield
One-piece high impact resistant
70/30 split, openable
Undercarriage
Dozer blade, front or rear mounted
Outriggers, front and/or rear mounted
Spacer rings for tires
Wide axles
Other Equipment
Auto-lube system
(implements and swing gear)
Cat Machine Security System
Cat Product Link
Mirrors heated, frame and cab
Ride Control
Tires (see pg.15)
Waste Handling Package
30
Page 31
Notes
31
Page 32
M318D Wheel Excavator
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
Materials and specications are subject to change without notice. Featured machines
in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”
and the “Power Edge” trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
16
AEHQ6278 (05-2011)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.