How it Works
Casio
Loading...
fx-CG10 Manager PLUS
User Manual
53 pgs2.78 Mb0
Table of contents
Loading...

Casio fx-CG10, fx-CG20, fx-CG10 Manager PLUS, fx-CG20 Manager PLUS User Manual

fx-CG10/20 Manager PLUS
E
User’s Guide
CASIO Worldwide Education Website
http://edu.casio.com
CASIO EDUCATIONAL FORUM
http://edu.casio.com/forum/

Getting Started

I About fx-CG10/20 Manager PLUS
• fx-CG10/20 Manager PLUS is an emulator that lets you perform fx-CG10/fx-CG20 operations on your computer.
• You can record key operations you perform on the emulator as “Key-Log records”, and edit Key­Log records as required.
• The keys on the Key-Log editor screen as well as the emulator LCD screen contents can be pasted into other applications. This means that emulator data can be used to create assignments, tests, and other materials.
• A presentation feature lets you play back saved Key-Log records.
• You can connect your fx-CG10/fx-CG20 unit to your computer and display its contents on your computer screen.
Important!
• Be sure to install the fx-CG10/20 Manager PLUS before you connect fx-CG10/fx-CG20 to your computer. Connecting before you install the fx-CG10/20 Manager PLUS can result in improper operation.
I Using This Manual
• For details about operation of the fx-CG10/fx-CG20 Graphic Scientific Calculator, see the user documentation that comes with the calculator.
• The procedures in this manual assume that you are already familiar with the following standard computer operations.
- Menu operations using the mouse, including: clicking, double-clicking, dragging, etc.
- Text input using the keyboard
- Icon operations, general window operations, etc.
- If you are not familiar with these types of operations, refer to the user documentation for your
computer.
• The screen shots shown in this manual are all from the English version of Windows
• Note that the actual appearance of the screen that appears when using this software depends on your computer system setup and on the operating system you are using.
• Screen shots shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that appear on display may differ from the examples shown in this User’s Guide.
®
XP.
I System Requirements
Operating Systems: Windows® XP Home Edition, Windows® XP Professional (32-bit), Windows
®
Vista Your hardware configuration needs higher than functionalities that operating system recommends.
Computer: IBM PC/AT or compatible computer
Computer with one of the Windows (Excluding computers with an upgraded operating system and self-built computers.)
Disk Space: 100MB for installation and uninstall
Note: Actual requirements and product functionality may vary based on your system
configuration and operating system.
Other: USB port for direct connection. Do not connect via a USB hub.
Video adapter and display must support resolution of XGA (1024×768) or higher, 16 bit or higher system color. Internet Explorer CD-ROM drive Adobe® Reader® 6.0 or later. Microsoft Microsoft
(32-bit), Windows® 7 (32-bit/64-bit)
®
operating systems pre-installed
®
6.0 or later.
®
Excel® 2000, Microsoft® Excel® 2003, Microsoft® Excel® 2007 or
®
Excel® 2010
Note
• Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
• Microsoft Excel is a trademark of Microsoft Corporation registered in the United States and/or other countries.
• Company and product names used herein are trademarks of their respective owners.

Contents

1. Installing and Uninstalling fx-CG10/20 Manager PLUS ...................... E-4
2. Screen Configuration ............................................................................. E-9
Menu Bar .......................................................................................................................E-10
Toolbar ..........................................................................................................................E-15
Status Bar .....................................................................................................................E-16
3. Emulator Mode and Key-Log Editor Mode ......................................... E-17
4. Emulating fx-CG10/fx-CG20 Calculator Operation ............................ E-18
5. Using the Emulator Key-Log ............................................................... E-24
6. Configuring Options Dialog Box Setting ........................................... E-30
7. Other Functions .................................................................................... E-32
Printing ..........................................................................................................................E-32
Shortcut Menu ...............................................................................................................E-34
8. File Types Supported by fx-CG10/20 Manager PLUS ....................... E-35
9. Differences between fx-CG10/fx-CG20 Calculator and
fx-CG10/20 Manager PLUS Functions ................................................ E-36
10. Using Screen Receiver to Display the Calculator Screen Image
on Your Computer ................................................................................ E-46
11. Error Message Table ............................................................................ E-49
1. Installing and Uninstalling fx-CG10/20
Manager PLUS
This section explains how to install and uninstall fx-CG10/20 Manager PLUS.
To install fx-CG10/20 Manager PLUS
1. Place the CD-ROM into your computer’s CD-ROM drive.
• After a short while, the fx-CG Manager PLUS screen will appear on the display.
2. Click “fx-CG10/20 Manager PLUS”, and then click “Install”.
• This will display a dialog box for selecting the screen language.
3. Select the language you want and then click [OK].
4. Click the [Next] button.
• This will display the end user license agreement (EULA).
5. Carefully read the EULA.
6. If you agree to the terms and conditions of the license agreement, click “I accept the terms…”,
and then click the [Next] button.
• If you do not agree to the terms and conditions of the license agreement, click “I do not accept the terms…” and then click [Cancel] button to exit the install procedure.
7. Perform either of the two following steps to specify the installation drive and folder.
7-a: If you want to use default settings, simply click the [Next] button. This is the method you
normally should use.
7-b: If you want to specify a different folder, click the [Change] button. Select the folder you
want and then click [Next].
8. Click the [Install] button.
• This will start installation.
9. The dialog box shown below will appear when installation is complete.
10. Click the [Finish] button.
• This completes installation.
Note
• Installing the software will put a “fx-CG10_20 Manager PLUS” shortcut icon on your Windows desktop.
To uninstall fx-CG10/20 Manager PLUS
1. Display the Windows Control Panel.
2. Click [Add/Remove Program].
3. On the list of applications that appears, select “fx-CG10/20 Manager PLUS”.
4. Click the [Add/Remove] button.
• This will display the program maintenance wizard.
5. Click the [Yes] button.
• This completes the uninstall operation.
To start up fx-CG10/20 Manager PLUS
1. On your computer’s desktop, click the “fx-CG10_20 Manager PLUS” icon.
• You could also start up the application by clicking [Start] - [Program] - [CASIO] - [fx-CG10/20 Manager PLUS] - [fx-CG10/20 Manager PLUS].

2. Screen Configuration

The following shows the fx-CG10/20 Manager PLUS screen.
Menu Bar Toolbar
Emulator
Status Bar
File Display Area
* When you have both the emulator window and Key-Log (or bitmap file) window open on the
display, the emulator window always will be displayed on top.

Menu Bar

• This section explains the fx-CG10/20 Manager PLUS menu bar.
• If a menu command can also be executed by clicking a toolbar button, the applicable toolbar button is also provided.
I File Menu
File History
Menu
New
Open
Close Closes the currently open file.
Capture Screen
Save
Save As Saves the current work file under a new name.
Print
Toolbar
Button
Description
Creates a new Key-Log file.
Opens an existing file.
Captures the emulator screen.
Saves the current work file, overwriting the previous (unedited) version.
Prints the currently displayed bitmap file.
Print Preview
Print Setup Displays the print setup dialog box.
Displays a preview of the print image.
E-10
Menu
(File History) Shows up to four of the last files you worked on.
Exit Exits fx-CG10/20 Manager PLUS.
Toolbar
Button
Description
I Edit Menu
Menu
Undo
Redo
Copy
Paste
Clear Deletes the currently selected area.
Select All Selects all Key-Log records.
Toolbar
Button
Description
Undoes the last operation.
Redoes the last undone operation.
Cuts the currently selected screen area and places it onto the clipboard.
Copies the currently selected screen area to the clipboard.
Pastes the clipboard contents.
* The Edit menu is disabled during emulator operation.
E-11
I View Menu
Menu Submenu Description
Calc Key
Calc Screen
Toolbar
I Key-Log Menu
Emulator mode Key-Log editor mode
Small Selects small-size calculator keys. Normal Selects normal-size calculator keys. Small Selects small-size display. Normal Selects normal-size display. Standard Toggles display of the standard toolbar on and off. Log Toggles display of the log toolbar on and off. Edit Toggles display of the edit toolbar on and off. Bitmap Toggles display of the bitmap toolbar on and off.
E-12
Menu
Toolbar
Button
Description
Add
Delete
Emulator
Editor
Auto Play
Step Play
Stop
Pause
Adds a new Key-Log record.
Deletes the currently displayed Key-Log record.
Enters the emulator mode.
Enters the Key-Log editor mode.
Starts Key-Log auto playback. If a calculation contains a Memory Character to the left of the cursor, Key- Log playback automatically starts from the Memory Character position.
Starts Key-Log manual playback. Except during step playback, Key-Log playback manually starts from the Memory Character position to the left of the cursor.
Stops Key-Log playback or recording.
Pauses Key-Log playback.
Record
Insert Pause
Starts Key-Log record operation.
During Key-Log editing, inserts a pause character into Key-Log playback.
I Window Menu
Menu Description
Tiled Displays all windows in a tiled configuration. Horizontal Displays all windows in a horizontal line.
• The Window menu also shows the names of files that you have open. When you have multiple files open, the file name at the top of the list is the one you are currently working with the active file.
E-13
I Tools Menu
Menu
Screen Receiver
Options Displays a dialog box for configuring optional settings.
Toolbar
Button
Description
Starts up Screen Receiver.
I Help Menu
Menu Submenu Description
Manual
License Displays the end user license agreement.
Calculator Displays the Calculator User’s Guide. Manager PLUS Displays the Manager PLUS User’s Guide.
About Displays version information.
E-14

Toolbar

• This section explains the fx-CG10/20 Manager PLUS toolbar buttons.
• The toolbar buttons correspond to menu bar commands. See the section of this manual that explains the menu bar for details about each button’s function.
I Standard Toolbar
Editor
New Open Save Print Print Cut Copy Paste Undo Redo Screen Emulator Preview Receiver
I Log Toolbar
Play Step Stop Pause Record
I Edit Toolbar
Add Delete Insert Pause Font ... Specifies the font of input text. Font Size ... Specifies the font size of input text. Key-Log Record ... Selects the Key-Log record to be played back or edited.
I Bitmap Toolbar
  
Capture Screen Outer Frame
Specifies an outer frame for screen captures.
Bitmap Size
Specifies the bitmap size. Supported sizes are Small, Normal, s2 and s3.
E-15
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use