Casio DT-X5 User Manual
Handheld Terminal
E
DT-X5
User’s Guide
Be sure to read “Safety
Precautions” inside this
guide before trying to use
your Handheld Terminal.
After reading this guide,
keep it in a safe place for
future reference.
Series
PN410388-002
DT-X5_E_Hyo_1_4.p65 04.7.14, 6:00 PM3
• This product includes BRYCEN Co., Ltd’ s B-RAPPORE Stack, which use is governed
by a licence granted by BRYCEN Co., Ltd.
• BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CASIO
COMPUTER CO., LTD.
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Datalight is a registered trademark of Datalight, Inc.
• FlashFXTM is a trademark of Datalight, Inc.
Copyright 1993-2000 Datalight, Inc., All Rights Reserved.
U.S. Patent Office 5,860,082
• Other company names and product names used in this guide are trademarks or registered
trademarks of their respective owners.
DT-X5_E_P00.p65 04.7.14, 6:01 PM2
Safety Precautions
Congratulations upon your selection of this CASIO product. Be sure to read the
following Safety Precautions before trying to use it for the first time.
Markings and Symbols
The following are the meanings of the markings and symbols used in these Safety
Precautions.
Danger
Warning
Caution
• A diagonal line indicates something you should not do. The symbol shown
here indicates you should not try to take the unit apart.
• A black circle indicates something you should do. The symbol shown here
indicates you should unplug the unit from the wall outlet.
This symbol indicates information that, if ignored or applied
incorrectly, creates the danger of death or serious personal injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of death or serious personal
injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of personal injury or property
damage.
Precautions During Use
Disassembly and Modification
• Never try to disassemble or modify the Handheld Terminal and its options in
any way. High voltage inside creates the danger of electric shock.
Abnormal Conditions
• Should the Handheld Terminal and its options become hot or start to emit
smoke or a strange odor, immediately turn off the power, and contact your
original vendor or an authorized CASIO service provider. Continued use
creates the danger of fire and electric shock.
Warning
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM1
E-1
Safety Precautions
Foreign Objects
• Should any foreign matter get into the Handheld Terminal and its options,
immediately turn off the power and contact your original vendor or an
authorized CASIO service provider. Continued use creates the danger of fire
and electric shock.
Dropping and Damage
• Should you drop the Handheld Terminal and its options and damage them,
immediately turn off the power and contact your original vendor or an
authorized CASIO service provider. Continued use creates the danger of fire
and electric shock.
Moisture
• Though your Handheld Terminal is water splash-resistant, its Cradle and
other optional peripherals are not. Keep loose metal objects and containers
filled with liquids away from your Handheld Terminal and the optional
peripherals.
Also, never connect or disconnect peripherals to the Handheld Terminal
while they are wet. Water getting into the Handheld Terminal or its
peripherals creates the danger of fire and electric shock.
Laser Light
• This product scans bar codes using laser light. Never look directly into the
laser light or shine the laser light into the eyes.
Warning
E-2
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM2
Caution
Foreign Objects
• Take care to ensure that metals or combustible objects are not inserted into
the openings of the Handheld Terminal and its options. Such the objects
inside of the Handheld Terminal and its options create the danger of fire and
electric shock.
Location
• Do not locate the Handheld Terminal and its options on a surface that is
unstable or uneven. Doing so creates the danger of the Handheld Terminal
falling, which can cause personal injury.
• Do not locate the Handheld Terminal and its options in an area subject to
large amounts of humidity or dust. Doing so creates the danger of fire and
electric shock.
• Do not leave the Handheld Terminal and its options for a long period in a car
parked in direct sunlight.
Heavy Objects
• Never place heavy objects on top of the Handheld Terminal and its options.
Doing so creates the danger of loss of balance and the objects falling, which
can cause personal injury.
LCD Screen
• Should the LCD panel glass break, never touch the liquid inside. Doing so
can cause skin inflammation.
– Should liquid from the LCD panel accidentally get into your mouth,
immediately wash your mouth with water and then consult a physician.
– Should liquid from the LCD panel accidentally get into your eyes or onto
your skin, immediately rinse for at least 15 minutes with clean tap water
and then consult a physician.
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM3
E-3
Safety Precautions
Operation of Wireless Data Communication Function
Warning
Interference with the Operation of Other Equipment
(Using Wireless Data Communication Function)
• Please follow the instructions provided by health care facilities when using
your Handheld Terminal in hospitals or other locations where medical
equipment is in use. In particular, either switch off the wireless data
communication function of the Handheld Terminal or turn off the power in
locations such as operating rooms, intensive care units, coronary artery
disease monitoring units and other locations where use of the Handheld
Terminal is prohibited by the health care facility. Radio waves emitted by
the Handheld Terminal can affect the operation of medical equipment.
• Keep your Handheld Terminal at least 22 centimeters (8
anyone wearing a pacemaker. Radio waves emitted by the Handheld
Terminal can affect the operation of a pacemaker.
• The use of wireless communication devices and electronic devices is
prohibited by airlines depending on the flight status of the aircraft. Switch off
the wireless data communication function of the Handheld Terminal while
onboard an aircraft. Use of the Handheld Terminal can affect electronic
devices used by the aircraft potentially causing a malfunction or accident.
5
/8") away from
Caution
Interference with the Operation of Other Equipment
(Using Wireless Data Communication Function)
The Handheld Terminal contains a built-in wireless communication device of a low-power
data communication system. The frequency band that is used is also used by microwave ovens
and other industrial, scientific and medical devices, as well as other wireless stations of the
same type, local wireless stations for identifying moving objects requiring licensing used on
factory production lines and so forth, specified low-power wireless stations not requiring
licensing, and amateur wireless stations (to be referred to as “other wireless stations”).
• Confirm that other wireless stations are not in use nearby before using the
Handheld Terminal.
•
In the case radio wave interference has been generated between the Handheld Terminal
and other wireless stations, either promptly change the location where the Handheld
Terminal is used or discontinue operation of the equipment causing the interference.
•
If other problems should occur as a result of the generation of radio wave interference,
please contact the location indicated in the section on product consultations.
This wireless transmitter uses the 2.4 GHz band. It employs the FH-SS
modulation system and has an interfering range of 20 m.
This wireless transmitter uses the 2.4 GHz band. It employs the DS-SS
modulation system and has an interfering range of 40 m.
(DT-X5M10R/DT-X5M30R/DT-X5M30UR)
E-4
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM4
Alkaline Battery Handling Precautions
Danger
• Since there is the risk of blindness and other serious disorders when alkaline
battery fluid enters the eyes, seek medical treatment immediately after
adequately flushing the eyes with a large amount of tap water or other clean
water without rubbing.
Warning
• Do not dispose of batteries in open flames or allow them to be heated,
disassembled or modified. This results in the risk of damaging insulation
and safety valves or causes the batteries to leak fluid, overheat or rupture.
• Do not reverse the (+) and (–) poles of the batteries. This results in the risk
of abnormal reactions during charging or short-circuiting, or causes the
batteries to leak fluid, overheating or rupture.
• Store batteries in a location out of the reach of small children. In the case a
battery should happen to be swallowed, seek medical treatment immediately.
• In the case of having ingested alkaline battery fluid, gargle immediately and
seek medical treatment.
• Since there is the risk of injury to the skin in the case alkaline battery fluid
has come in contact with the skin or clothing, immediately rinse off with a
large amount of tap water or other clean water.
• Do not allow the (+) and (–) poles of alkaline batteries to come in contact
with wires or other metal objects, and do not carry or store them together
with metal necklaces, hair pins and so on. This results in the risk of the
batteries short-circuiting resulting in the flow of excess current and causing
the batteries to leak fluid, overheat or rupture.
• Do not use a new battery with an old battery that has already been used or
use different types of batteries. Differences in properties results in the risk
of the batteries leaking fluid, overheating or rupturing.
• These batteries are not designed to be recharged. Recharging results in the
risk of damage to insulation and internal structure causing the batteries to
leak fluid, overheat or rupture.
• Do not remove or damage the battery outer label. This results in the risk of
the batteries short-circuiting, leaking fluid, overheating or rupturing.
•
Do not subject the batteries to strong impacts resulting from dropping or throwing.
This results in the risk of the batteries leaking fluid, overheating or rupturing.
• Do not allow the batteries to be deformed or damaged. This results in the
risk of damage to the insulation and safety valve causing the batteries to
leak fluid, overheat or rupture.
E-5
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM5
Safety Precautions
• Promptly remove worn out batteries from the Handheld Terminal. Allowing
worn out batteries to remain installed in the Handheld Terminal for a long
period of time results in the risk of the generation of gas from the batteries
causing the batteries to leak fluid, overheat or rupture.
• Remove the batteries from the Handheld Terminal when not using for a long
period of time. Failure to do so results in the risk of the generation of gas
from the batteries causing the batteries to leak fluid and damage the
Handheld Terminal.
• Do not attempt to solder the batteries directly. This results in the risk of heat
damaging the insulation and safety valve causing the batteries to leak fluid,
overheat or rupture.
• Do not use or place the batteries in a location subject to high temperatures
such as locations of intense direct sunlight or in an automobile on a hot day.
This results in the risk of the batteries leaking fluid, overheating or
rupturing.
• Insulate the ends of the batteries by covering with tape and so on when
storing or disposing. Allowing the batteries to contact other batteries or
metal objects results in the risk of the batteries leaking fluid, overheating or
rupturing.
• Do not allow the batteries to become wet. This results in the risk of the
batteries overheating.
• Avoid storing batteries in locations subject to direct sunlight, high
temperature or high humidity. This results in the risk of the batteries leaking
fluid. In addition, there is also the risk of reduced battery performance and
shorter battery life.
• Although these batteries may be disposed of in the same manner as ordinary
non-burnable garbage, please dispose of them in the proper manner in
accordance with the rules and regulations of your local community when
applicable.
Caution
E-6
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM6
Optional Lithium-ion Battery Pack
Danger
• Never allow the battery pack to become wet. Water can create the danger of
battery pack heat emission, explosion, and fire.
• Never use or leave the battery pack next to open flame, near a stove, or any
other area exposed to high heat. Doing so creates the danger of battery pack
heat emission, explosion, and fire.
• Never use the battery pack with any device other than the Handheld
Terminal. Doing so can create the danger of battery pack heat emission,
explosion, and fire.
• Note that the battery pack’s positive (+) and negative (–) polarities must be
oriented correctly when it is loaded into battery charger or the Handheld
Terminal. Connecting the battery pack with its polarities reversed creates the
danger of battery pack fluid leakage, heat emission, explosion, and fire.
• Never dispose of the battery pack by incinerating it or otherwise expose it to
heat. Doing so creates the danger of battery pack heat emission, explosion,
and fire.
• Never allow the positive (+) and negative (–) terminals of the battery pack to
become connected (shorted) by metal. Doing so creates the danger of battery
pack heat emission, explosion, and fire.
• Never transport or store the battery pack together with a necklace, hair pins
or other metal objects. Doing so can short battery pack terminals, creating
the danger of battery pack heat emission, explosion, and fire. Be sure to
place the battery pack in its case whenever transporting or storing it.
• Never throw the battery pack or otherwise subject it to strong impact. Doing
so creates the danger of battery pack heat emission, explosion, and fire.
• Never pierce the battery pack with nails, hit it with a hammer, or step on it.
Doing so can create the danger of battery pack heat emission, explosion, and
fire.
• Never try to take apart the battery pack or modify it in any way. Doing so
creates the danger of battery pack heat emission, explosion, and fire.
• Use only the specified battery charger to charge the battery pack. Use of
other type of battery charger creates the danger of battery pack heat
emission, explosion, and fire.
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM7
E-7
Safety Precautions
• Never place the battery pack in a microwave oven or any other high-voltage
device. Doing so creates the danger of battery pack heat emission,
explosion, and fire.
• Should the battery pack emit a strange odor or heat, change color or shape,
or exhibit any other abnormal behavior, immediately stop using it.
Continued use creates the danger of battery pack heat emission, explosion,
and fire.
• If the battery pack does not achieve full charge after the normal charging
time has passed, stop charging it. Continued charging creates the danger of
battery pack heat emission, explosion, and fire.
• Should the battery pack start to leak or emit a strange odor, immediately
move it away from flame. Leaking battery fluid is combustible, and
exposure to flame creates the danger of explosion and fire.
• Should fluid from the battery pack accidentally get into your eyes, do not
rub them. Immediately rinse your eyes with clean tap water and then consult
a physician immediately.
Warning
Caution
• Never use or leave the battery pack in an area exposed to direct sunlight, in
a car parked in direct sunlight, or any other very hot area. Doing so creates
the danger of heat emission and fire, as well as deterioration of battery pack
performance and shortening of its service life.
• Do not use the battery pack in areas where static electricity is being
generated. Doing so creates the danger of battery pack heat emission,
explosion, and fire.
• Danger of explosion if the battery pack is incorrectly replaced.
Replace only with same or equivalent type recommended by CASIO.
Dispose of used batteries according to the CASIO instruction.
• Should fluid from the battery pack accidentally get onto clothing or your
skin, immediately rinse it off with clean tap water. Prolonged contact with
battery pack fluid can cause skin irritation.
• Keep the battery pack out of the reach of small children. Do not let small
children remove the battery pack from battery charger or the Handheld
Terminal while it is powered on.
E-8
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM8
AC Power Supply
• Do not use the Handheld Terminal at a voltage other than the specified
voltage. Also, do not connect the Handheld Terminal to a multi-plug power
strip. Doing so creates the danger of fire and electric shock.
• Avoid conditions that can cause damage or breaks in the power cord. Do not
place heavy objects on the power cord and keep it away from sources of
heat. Any of these conditions can damage the power cord, creating the
danger of fire and electric shock.
• Never modify, sharply bend, twist, or pull on the power cord. Doing so
creates the danger of fire and electric shock.
• When using the battery charger, Cradle and Dual Battery Charger, be sure to
use the respective AC adaptors. Use of other types of AC adaptors creates
the danger of fire and electric shock.
• Should the power cord become severely damaged (to the point that wires are
exposed or broken), contact your original vendor or an authorized CASIO
service provider about repair or replacement. Use of a damaged electrical
cord creates the danger of fire and electric shock.
• Keep the power cord away from stoves and other sources of extreme heat.
Heat can melt the covering of the power cord and create the danger of fire
and electric shock.
• Never pull on the power cord when unplugging it. Doing so can damage the
cord and create the danger of fire and electric shock. (Always hold the plug
when unplugging it from the wall outlet.)
• Never touch the plug while your hands are wet. Doing so can create the
danger of electric shock.
• Be sure to unplug the power cord from the wall outlet before moving the
battery charger, Cradle and Dual Battery Charger. Failure to do so can result
in damage to the power cord caused by pulling it, which creates the danger
of fire and electric shock.
• Be sure to unplug the power cord from the wall outlet before cleaning the
battery charger and Cradle.
• Be sure to turn the power off and unplug the power cord after use.
•
Unplug the power cord from the wall outlet whenever leaving the battery charger,
Cradle and Dual Battery Charger unattended for a long period of time.
Warning
Caution
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM9
E-9
Safety Precautions
AC Adaptor
Caution
• The housing of the AC adaptor can become warm during normal use.
• Take normal precautions against electric shock.
• At least once a year, unplug the AC adaptor from the wall outlet and clean
any dust that builds up between the prongs of the plug.
Dust built up between the prongs can lead to the danger of fire.
Backup Copies of All Important Data
Caution
• Note that CASIO Computer Co., Ltd. shall not be held liable to you or any
third party for any damages or loss caused by deletion or corruption of data
due to use of the Handheld Terminal, malfunction or repair of the Handheld
Terminal or its peripherals, or due to the batteries going dead.
• The Handheld Terminal employs electronic memory to store data, which
means that memory contents can be corrupted or deleted if power is
interrupted due to the batteries going dead or incorrect battery replacement
procedures. Data cannot be recovered once it is lost or corrupted. Be sure to
make backup copies of all important data.
E-10
DT-X5_E_P01_10.p65 04.7.14, 6:01 PM10
Operating Precautions
Your Handheld Terminal and its options are precision digital instruments. Improper
operation or rough handling can cause problems with data storage and other problems.
Note and observe the following precautions to ensure proper operation.
• Do not continue operating the Handheld Terminal when battery power is low.
Doing so can cause data to be lost or altered. If the batteries become worn down,
either promptly replace them with new AA size alkaline batteries or charge the battery
pack.
• Do not leave dead batteries in the Handheld Terminal for a long period.
Dead batteries can leak, leading to malfunction and damage to the Handheld Terminal.
• Use the Handheld Terminal and its options only within the specified temperature
range.
Use outside of the specified temperature range creates the risk of malfunction.
• Avoid using the Handheld Terminal and its options in areas subject to the
following conditions.
Doing so can damage the Handheld Terminal or cause it to malfunction.
— Large amounts of static electricity
— Extreme heat or extreme cold
— High humidity
— Sudden temperature extremes
— Large amounts of dust
• Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents to
clean the Handheld Terminal.
To clean the Handheld Terminal, wipe it with a dry cloth or cloth moistened with
neutral detergent diluted with water. Wring all excess moisture from the cloth
before wiping.
DT-X5_E_P11_15.p65 04.7.14, 6:02 PM11
E-11
Important
• The contents of this guide are subject to change without notice.
• Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any third
parties for any losses or damages arising from the use of this guide.
• Although the utmost care has been taken in preparing this manual, please contact the
manufacturer if you should happen to notice any inconsistencies or errors.
• This guide does not include any information about programming and download
procedures. See the applicable separate documentation for information about the
procedures.
Warranty and After Service
• Should this product ever malfunction, contact your original retailer providing
information about the product name, the date you purchased it, and details about the
problem.
E-12
DT-X5_E_P11_15.p65 04.7.14, 6:02 PM12
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC
emission limits.
Peripherals and Cables
AC Adaptor (AD-S42120A)
Cables (DT887AXA, DT888RSC, DT-380USB)
Model Numbers: DT-X5M30U, DT-X5M30UR, HA-A61IO, HA-A60IO, HA-A30CHG
Trade Name: CASIO
Responsible party: CASIO, INC.
Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Declaration of Conformity
E-13
DT-X5_E_P11_15.p65 04.7.14, 6:02 PM13
Important
We, the undersigned.
Company CASIO Europe GmbH
Address, City Bornbarch 10, D-22848 Norderstedt
Country Germany
Phone number +49(0)40-528-65-0
Fax number +49(0)40-528-65-424
certify and declare under our sole responsibility that the following equipments:
Product description / Intended use
EU/EFTA member states intended for use EU: Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden, United Kingdom
EFTA: Switzerland, Iceland, Lichtenstein, Norway
Member states with restrictive use NONE
Manufacturer CASIO COMPUTER CO., LTD.
Brand CASIO
Type DT-X5M10E, DT-X5M10R, DT-X5M30E,
are tested and found to conform with the essential requirements for protection of health and the safety of the
user and any other persons and Electromagnetic Compatibility, as included in following standards:
Standard lssue date
EN60950:2000 2002-02
EN301 489-1, 2002-08
EN301 489-17 2002-08
and are tested and found to conform with the essential radio test suites so that they effectively use the
frequency spectrum allocated to terrestrial/space radio communication and orbital resources so to as to
avoid harmful interference, as included in following standards:
DT-X5M10E;
Standard lssue date
EN300 328-1 2001-12
EN300 328-2 2001-12
and therefore comply with the essential requirements and provisions of the Directive 1999/5/EC of the
European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications
Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex III
(Conformity Assessment procedure referred to in article 10).
DT-X5M10R;
Standard lssue date
EN300 328-1 2001-12
EN300 328-2 2001-12
EN50360 2001-07
EN50361 2001-09
and therefore comply with the essential requirements and provisions of the Directive 1999/5/EC of the
European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications
Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex IV
(Conformity Assessment procedure referred to in article 10).
DT-X5M30R, DT-X5M30U, DT-X5M30UR,
E-14
DT-X5_E_P11_15.p65 04.7.14, 6:02 PM14
The folowing Notified Body has been consulted in the Conformity Assessment procedure.
0560
Notified Body number Name and Address
0560 TELEFICATION B.V., Utrechtseweg 310 - P.O. Box 60004,
The technical documentation as required by the Conformity Assessment procedure is kept at the following
address:
Company CASIO Europe GmbH
Address, City Bornbarch 10, D-22848 Norderstedt
Country Germany
Phone number +49(0)40-528-65-0
Fax number +49(0)40-528-65-424
Products are for distribution within all member states of the EU.
DT-X5M10E/DT-X5M30E/DT-X5M30U; DT-X5M10R/DT-X5M30R/DT-X5M30UR;
NL-6800 JA ARNHEM, The Netherlands
0560
The information described above dates from May 2004 and maybe subjected to future changes.
E-15
DT-X5_E_P11_15.p65 04.7.14, 6:02 PM15
Contents
Safety Precautions ............................................................................................ 1
Operating Precautions .................................................................................... 11
Important .......................................................................................................... 12
Warranty and After Service ........................................................................... 12
Before Getting Started .................................................................................... 18
When unpacking, make sure that all items are included. ............................. 18
Install the main battery.................................................................................. 19
When Using the AA size Alkaline Batteries ......................................................... 19
When Using the Battery Pack ............................................................................... 20
Turning On the Power................................................................................... 21
Handheld Terminal System Configuration .................................................... 22
General Guede ................................................................................................. 25
Replacing the Battery ..................................................................................... 27
Replacing the Battery Pack .......................................................................... 27
Replacing the AA size Alkaline Batteries ............................................................. 28
To replace the battery pack ................................................................................... 29
Loading the large-capacity battery pack into the Handheld Terminal .................. 31
Removing and Installing the Alkaline Battery Holder .................................. 32
Removal Procedure ...................................................................................... 32
Installation Procedure ................................................................................... 33
Attaching the Wrist Strap ............................................................................... 34
Configuring Handheld Terminal Settings ..................................................... 35
Adjusting Display Contrast ........................................................................... 35
Turning Backlight On and Off ....................................................................... 35
Using the Laser Scanner ................................................................................ 36
Warning Label .............................................................................................. 37
Bar Code Scanning Position ......................................................................... 37
Using the C-MOS Imager ................................................................................ 38
Warning Label .............................................................................................. 39
Adjusting Laser Emission Width ................................................................... 40
Emission Width Adjustment Bar code .................................................................. 41
Performing Communication ........................................................................... 42
IR Communication ........................................................................................ 42
Bluetooth
TM
Communication ......................................................................... 43
E-16
DT-X5_E_P16_17.p65 04.7.27, 3:23 PM16
Resetting the Handheld Terminal................................................................... 44
Reset and Full Reset (Memory Initialization) ................................................ 44
Reset ..................................................................................................................... 44
Performing a Full Reset (Initialization) ................................................................ 44
To perform a reset ........................................................................................ 44
If reset does not find a memory problem .............................................................. 44
If reset finds a memory problem........................................................................... 45
To perform a full reset ................................................................................... 45
DT-X5 Specifications ....................................................................................... 46
Using the Bridge Satellite Cradle (HA-A61IO)/
Bridge Basic Cradle (HA-A60IO) ............................................................ 49
General Guide .............................................................................................. 49
Connecting the AC Adaptor and Connecting to Computer ........................... 51
Removing the Fall Protector ......................................................................... 53
Configuring DIP Switch Settings (HA-A61IO) ............................................... 54
Using Wall Mount Unit .................................................................................. 55
To remove the Bridge Satellite Cradle/Bridge Basic Cradle from the wall .......... 56
Connecting Multiple Bridge Satellite Cradles (HA-A61IO) ............................ 57
Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO) Specifications ....
58
Using the Cradle-type Battery Charger ......................................................... 59
General Guide .............................................................................................. 59
Connecting the AC Adaptor for Cradle-type Battery Charger ....................... 61
Using Wall Mount Unit .................................................................................. 62
Removing the Fall Protector ......................................................................... 62
Cradle-type Battery Charger (HA-A30CHG) Specifications ......................... 62
Using the Dual Battery Charger ..................................................................... 63
General Guide .............................................................................................. 63
Charging a Battery Pack ....................................................................................... 65
Charge Indicator Lamp ......................................................................................... 65
Connecting Multiple Dual Battery Chargers ................................................. 66
Dual Battery Charger (DT-5022CHG) Specifications .................................... 67
Using Rechargeable Battery Pack ................................................................. 68
Battery Pack Specifications .......................................................................... 68
Large-capacity Battery Pack Specifications.................................................. 68
DT-X5_E_P16_17.p65 04.7.14, 6:02 PM17
E-17
Before Getting Started
Be sure to perform the following steps before using the Handheld Terminal for the first
time.
Check the contents
of the box
Install the main
battery
Turn on
the power
• Using the AA size
alkaline batteries
• Using the battery pack
(charging required)
When unpacking, make sure that all items are included.
Open the box and make sure that all the items shown here are included.
Handheld Terminal
AA size Alkaline Batteries
(DT-X5M10E/DT-X5M30E/DT-X5M30U only)
Wrist Strap
User's Guide (this manual)Large-capacity battery pack Cover
E
Handheld Terminal
Series
DT-X5
User’s Guide
E-18
DT-X5_E_P18_24.p65 04.7.14, 6:02 PM18
Be sure to read “Safety
Precautions” inside this
guide before trying to use
your Handheld Terminal.
After reading this guide,
keep it in a safe place for
future reference.
PN410388-002
Install the main battery
When Using the AA size Alkaline Batteries (DT-X5M10E/DT-X5M30E/
DT-X5M30U only)
1. Install the AA size alkaline batteries.
1 Slide the two main battery cover lock
switches on both sides of the Handheld
Terminal to the “FREE” position, and
remove the main battery cover.
1
2 Install the AA size alkaline batteries.
Make sure the batteries are aligned
properly.
1
3 Return the main battery cover to its
original position as shown in the
illustration, and return the two main
battery pack cover lock switches to the
“LOCK” position.
2
1
2
1
2
1
DT-X5_E_P18_24.p65 04.7.27, 3:29 PM19
2
3
3
E-19
Before Getting Started
When Using the Battery Pack
Charging is required when using the battery pack (HA-A20BAT or DT-5025LBAT) sold
separately.
Use the Dual Battery Charger when charging the battery pack before installing in the
Handheld Terminal, or use the Cradle-type Battery Charger or Cradle to charge after
installing in the Handheld Terminal.
1. Remove the alkaline battery holder if it is installed.
Refer to page 32 for information on removing the alkaline battery holder.
2. Use the Dual Battery Charger when charging the battery pack in advance.
Refer to page 65 for information on the charging procedure.
3. Load the battery pack into the Handheld Terminal.
1 Slide the two main battery cover lock
switches on both sides of the Handheld
Terminal to the “FREE” position, and
then remove the main battery cover.
2
1
E-20
2 Load a battery pack (HA-A20BAT) or a
large-capacity battery pack (DT5025LBAT).
• Take care that the battery pack is
oriented correctly when you load it.
• Install the battery pack so that the
battery pack removal tape is on top
of the battery pack.
1
1
2
DT-X5_E_P18_24.p65 04.7.27, 3:29 PM20
Loading...