Casio CASSIOPEIA IT-70, CASSIOPEIA IT-700 User Manual

Getting Started with the Pocket PC Terminal (Hardware Manual)

–

CLR

User documentation consists of two manuals:

Pocket PC User’s Guide Started with the Pocket PC Terminal

Be sure to read this

Manual

first.

Be sure to read the Safety Precautions contained in this to ensure proper operation of this product.

Keep this place for future reference.

Getting Started Manual

and

Getting

Getting Started

Getting Started Manual

in a safe

• Microsoft, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

• Pentium is a registered trademark of Intel Corporation.

• CompactFlash is a registered trademark of SanDisk Corporation.

• Datalight is a registered trademark of Datalight, Inc.

• FlashFX

™

• All other product and company names mentioned herein may be the trademarks of their respective owners.

• CAUTION-Battery pack is suitable for use only with Pocket PC Terminal, Model IT-700/70.

• Dispose of used batteries according to the manufacturer’s instructions.

• Information in this manual is subject to change without notice.

• CASIO shall have neither liability nor responsibility to any person or entity with respect

to any loss or damages arising from the information contained in this book.

• Due to the ever changing landscape of the handheld computer field, compatibility of future products with past or current products cannot be assured and, therefore, compatibility of products shall be solely at CASIO’s discretion.

• This manual does not provide information about programming and downloading. See other manuals coming with IT-700/70 for information about these subjects.

Safety Precautions

Congratulations upon your selection of this CASIO Product. Be sure to read the following Safety Precautions before trying to use it for the first time.

Markings and Symbols

The following are the meanings of the markings and symbols used in these Safety Precautions.

Danger

Warning

Caution

• A diagonal line indicates something you should not do. The symbol shown here indicates you should not try to take the unit apart.

• A black circle indicates something you should do. The symbol shown here indicates you should unplug the unit from the wall outlet.

This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury.

This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of death or serious personal injury.

This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of personal injury or property damage.

Precautions During Use

Disassembly and Modification

• Never try to disassemble or modify the Pocket PC Terminal in any way. High voltage inside creates the danger of electric shock. There are hot parts inside the printer. Do not touch these parts with your hands. Doing so can cause burns.

Abnormal Conditions

• Should the Pocket PC Terminal become hot or start to emit smoke or a strange odor, immediately turn off the power and contact your original dealer or an authorized a CASIO service provider. Continued use creates the danger of fire and electric shock.

Warning

Foreign Objects

• Should any foreign matter get into the Pocket PC Terminal, immediately turn off the power and contact your original dealer or an authorized CASIO service provider. Continued use creates the danger of fire and electric shock.

Dropping and Damage

• Should you drop the Pocket PC Terminal and damage it, immediately turn off the power and contact your original dealer or an authorized CASIO service provider. Continued use creates the danger of fire and electric shock.

Moisture

• Keep the Pocket PC Terminal away from vases, planters, cups, glasses and other containers of liquid. Also keep it away from metal. Water and metal getting into the Pocket PC Terminal creates the danger of fire and electric shock.

Caution

Foreign Objects

• Take care to ensure that metal or combustible objects are not inserted into the openings of the Pocket PC Terminal. Such objects create the danger of fire and electric shock.

Location

• Do not locate the Pocket PC Terminal on a surface that is unstable or uneven. Doing so creates the danger of the Pocket PC Terminal falling, which can cause personal injury.

• Do not locate the Pocket PC Terminal in an area subject to large amounts of humidity or dust. Doing so creates the danger of fire and electric shock.

• Do not leave the Pocket PC Terminal for long periods in a car parked in direct sunlight.

Heavy Objects

• Never place heavy objects on top of the Pocket PC Terminal. Doing so creates the danger of loss of balance and the object falling, which can cause personal injury.

Caution

LCD Screen

• Never apply strong pressure to the screen or subject it to strong impact. Doing so can crack the screen or LCD panel glass, which can cause the danger of personal injury.

• Should the LCD panel glass break, never touch the liquid inside. Doing so can cause skin inflammation. – Should liquid from the LCD panel accidentally get into your mouth,

immediately wash your mouth with water and then consult a physician.

– Should liquid from the LCD panel accidentally get into your eyes or onto

your skin, immediately rinse for at least 15 minutes with clean tap water and then consult a physician.

Optional Lithium-ion Battery Pack

Danger

• Never allow the battery pack to become wet with either fresh water or salt water. Water can create the danger of battery pack heat emission, explosion, and fire.

• Never use or leave the battery pack next to open flame, near a stove, or any other area exposed to high heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Never use the battery pack with any device other than the Pocket PC Terminal. Doing so can create the danger of battery pack heat emission, explosion, and fire.

• Note that the battery pack’s positive (+) and negative (–) terminals must be oriented correctly when it is loaded into the charger unit or the Pocket PC Terminal. Connecting the battery pack with its terminals reversed creates the danger of battery pack fluid leakage, heat emission, explosion, and fire.

• Never dispose of the battery pack by incinerating it or otherwise expose it to heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Never allow the positive (+) and negative (–) terminals of the battery pack to become connected (shorted) by metal. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Never transport or store the battery pack together with a necklace, hair pins or other metal objects. Doing so can short battery pack terminals, creating the danger of battery pack heat emission, explosion, and fire. Be sure to place the battery pack in its case whenever transporting or storing it.

• Never throw the battery pack or otherwise subject it to strong impact. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Danger

• Never pierce the battery pack with nails, hit it with a hammer, or step on it. Doing so can create the danger of battery pack heat emission, explosion, and fire.

• Never try to take apart the battery pack or modify it in any way. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Use only the specified charger unit to charge the battery pack. Use of another type of charger unit creates the danger of battery pack heat emission, explosion, and fire.

Warning

• Never place the battery pack in a microwave oven or any other high-voltage device. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Should the battery pack emit a strange odor or heat, change color or shape, or exhibit any other abnormal behavior, immediately stop using it. Continued use creates the danger of battery pack heat emission, explosion, and fire.

• If the battery pack does not achieve full charge after the normal charging time has passed, stop charging. Continued charging creates the danger of battery pack heat emission, explosion, and fire.

• Should the battery pack start to leak or emit a strange odor, immediately move it away from any nearby flame. Leaking battery fluid is combustible, and exposure to flame creates the danger of explosion and fire.

• Should fluid from the battery pack accidentally get into your eyes, do not rub them. Immediately rinse your eyes with clean tap water and then consult a physician immediately.

Caution

• Never use or leave the battery pack in an area exposed to direct sunlight, in a car parked in direct sunlight, or any other very hot area. Doing so creates the danger of heat emission and fire, as well as deterioration of battery pack performance and shortening of its service life.

• Do not use the battery pack in areas where static electricity is being generated. Doing so creates the danger of battery pack heat emission, explosion, and fire.

• Should fluid from the battery pack accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery pack fluid can cause skin irritation.

• Keep the battery pack out of the reach of small children. Do not let small children remove the battery pack from the charger unit or the Pocket PC Terminal while it is powered on.

Backup Battery Handling

• Do not charge the battery. Doing so can create the danger of battery leakage, heat emission, rupture, and fire.

• Do not throw batteries into fire, or heat, take apart or modify them. Doing so can create the danger of battery leakage, heat emission, rupture, and fire.

• Do not use the battery with its positive(+) and negative(–) terminals reversed, or store the battery with a necklace, hair pins or other metal object. Doing so can short the battery and cause excessive current to flow, and can create the danger of battery leakage, heat emission, rupture, and fire.

• Keep batteries out of the reach of small children. Should small children swallow a battery, consult a physician immediately.

• If fluid from the battery accidentally get into your eyes, do not rub them. Immediately rinse your eyes with clean tap water and then consult a physician immediately.

• If you lick fluid from the battery, immediately rinse with clean tap water, and consult a physician immediately.

• If the battery starts to leak or emits a strange odor, immediately move it away from any nearby flame. Leaking battery fluid is combustible.

• When storing and disposing of backup batteries, insulate the terminals with insulating tape. Mixing batteries together or with other metallic objects shorts the battery terminal, and can create the danger of battery leakage, heat emission, rupture, and fire.

Caution

Warning

• Never throw the battery, subject it to strong impact. Do not allow the battery to get wet with water. Doing so can create the danger of battery leakage, heat emission, rupture, and fire.

• Do not leave the battery in locations subject to strong direct sunlight or in high temperature locations such as in a car. Doing so can create the danger of battery leakage, heat emission, rupture, and fire.

• Avoid storing the battery on the direct sunlight or in high temperature and humidity locations. Doing so can create the danger of battery leakage, heat emission, rupture, and fire, as well as deterioration of battery performance and shortening of its service life.

• Used batteries may be disposed off as general unburnable rubbish. However, dispose of used batteries in accordance with any local bylaws and regulations.

AC Power Supply

• Do not use the Pocket PC Terminal at a voltage other than the specified voltage. Also, do not connect the Pocket PC Terminal to a multi-plug power strip. Doing so creates the danger of fire and electric shock.

• Avoid conditions that can cause damage or breaks in the power cord. Do not place heavy objects on the power cord and keep it away from sources of heat. Any of these conditions can damage the power cord, creating the danger of fire and electric shock.

• Never modify, sharply bend, twist, or pull on the power cord. Doing so creates the danger of fire and electric shock.

• When using the Optical Communication Unit, be sure to use the AC adaptor (sold separately). Use of another AC adaptor model creates the danger of fire and electric shock.

• Should the power cord become severely damaged (to the point that wires are exposed or broken), contact your original dealer or a CASIO service provider about repair or replacement. Use of a damaged electrical cord creates the danger of fire and electric shock.

Caution

Warning

Caution

• Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the covering of the power cord and create the danger of fire and electric shock.

Caution

• Never pull on the power cord when unplugging it. Doing so can damage the cord and create the danger of fire and electric shock. (Always hold onto the plug when unplugging it from the wall outlet.)

• Never touch the plug while your hands are wet. Doing so can create the danger of electric shock.

• Be sure to unplug the power cord from the wall outlet before moving the Pocket PC Terminal. Failure to do so can result in damage to the power cord caused by pulling it, which creates the danger of fire and electric shock.

• Be sure to unplug the power cord from the wall outlet before cleaning the Pocket PC Terminal.

• Be sure to turn the power OFF and unplug the power cord after use.

• Unplug the power cord from the wall outlet whenever leaving the Pocket PC

Terminal unattended for long periods.

Backup Copies of All Important Data

Caution

• Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third party for any damages or loss caused by deletion or corruption of data due to use of the Pocket PC Terminal, malfunction or repair of the Pocket PC Terminal or its peripherals, or due to batteries going dead.

• The Pocket PC Terminal employs electronic memory to store data, which means that memory contents can be corrupted or deleted if power is interrupted due to batteries going dead or incorrect battery replacement procedures. Data cannot be recovered once it is lost or corrupted. Be sure to make backup copies of all important data. One way to do this is to use the separately sold Optical Communication Unit to transfer data to a computer.

Optional Laser Scanner Card

• Never look directly into the laser beam. Doing so can cause serious eye damage.

Warning

Operating Precautions

The Pocket PC Terminal is a precision digital instrument. Incorrect operation and rough handling can cause data storage problems and other malfunction. Be sure to read the following precautions to ensure proper operation.

• Charge the battery pack as soon as possible when they start to become weak. Continued use while power is low can lead to loss of memory data.

• Do not leave dead batteries in the Pocket PC Terminal for long periods. Doing so can result in battery leakage, which can damage the Pocket PC Terminal and cause malfunction.

• Use the Pocket PC Terminal under the conditions listed below.

• Temperature: –5°C to 50° C (23°F to 122°F)

• No condensation

Conditions other than those above can cause malfunction.

• Avoid using the Pocket PC Terminal in areas subjected to the following conditions.

• Static electricity

• Extreme heat or cold

• High humidity

• Sudden temperature changes

• Large amounts of dust

• Use only the stylus that comes with the Pocket PC Terminal to press the Reset button.

• Never use a pen, pencil, or other sharp writing implement. Doing so can scratch the

touch screen and cause malfunction.

• Never use thinner, benzene, cosmetics, or other volatile agents to clean the exterior of the Pocket PC Terminal. Use only a dry soft cloth or a soft cloth moistened with a weak solution of water and mild neutral detergent.

• Setting the display brightness too high or use of an optionally available CompactFlash card results in battery life shorter than that indicated in the specifications of this manual.

CASIO ELECTRONICS CO., LTD. Unit 6, 1000 North Circular Road London NW2 7JD, U.K.

Please keep all information for future reference.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Peripherals and Connectors

Desktop computer

Optical Communication Unit (IT-760IOE)

Lithium ion Battery Pack (DT-5023BAT, DT-5024LBAT)

AC adaptor for Optical Communication Unit (DT-825ADP-U)

CompactFlash Card (CF-16SC-S, CF-64SC-S, CF-256SC-S)

Connectors (DT-883RSC, DT-882RSC, DT-887AX, DT-881RSC, JK-580CA)

Declaration of Conformity

Model Number: IT-700M30E, IT-760IOE, IT-70M30E Trade Name: CASIO Responsible party: CASIO, INC. Address: 570 Mt. Plesant Avenue, Dover, New Jersey 07801 Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The following details are declared in the 15-country EU Union and 4-country EFTA Union.

Product description / Intended use EU/EFTA member states intended for use EU: Austria, Belgium, Denmark, Finland, France,

Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom

EFTA: Switzerland, Iceland, Lichtenstein, Norway Member states with restrictive use NONE Manufacturer CASIO COMPUTER CO., LTD. Brand CASIO Type IT-700M30RC, IT-70M30RC

is tested to and conforms with the essential requirements for protection of health and the safety of the user and any other person and Electromagnetic Compatibility, as included in following standards:

Standard

EN60950 ETS300 826

and is tested to and conforms with the essential radio test suites so that it effectively uses the frequency spectrum allocated to terrestrial/space radio communication and orbital resources so to as to avoid harmful interference, as included in following standards:

Standard

ETS300 328

and therefore complies with the essential requirements and provisions of the Directive 1999/5/EC of the European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex IV (Conformity Assessment procedure referred to in article 10).

The following Notified Bodies have been consulted in the Conformity Assessment procedure:

Notified Body number Name and address

0122 NMi Certin B.V., PO Box 15, 9822 ZG Niekerk, The Netherlands

The technical documentation as required by the Conformity Assessment procedure is kept at the following address:

Company CASIO ELECTRONICS CO . LTD. Address, City Unit6, 1000North Circular Road, London NW27JD Country United Kingdom Phone number 0181-450-9131 Fax number 0181-452-6323

Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Properly shielded and grounded cables and connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

AC adaptor with ferrite core must be used for RF interference suppression.

To operate this mobile device in France, there may be National regulatory restrictions to comply with. For detail please consult “Autorie de Regulation des Telecommunications (phone no. 01 40 47 71 33)”.

Safety Precautions ............................................................................................ 1

Markings and Symbols ........................................................................................... 1

Precautions During Use .......................................................................................... 1

Optional Lithium-ion Battery Pack ........................................................................ 3

Backup Battery Handling ....................................................................................... 5

AC Power Supply ................................................................................................... 6

Backup Copies of All Important Data .................................................................... 7

Optional Laser Scanner Card.................................................................................. 7

Operating Precautions...................................................................................... 8

Computer System Requirements .................................................................. 14

System Requirements ........................................................................................... 14

System Diagram .............................................................................................. 16

Option List (Non-U.S. Market Models) ............................................................... 16

IT-700/70 Series Options (U.S. Market Models).................................................. 17

General Guide.................................................................................................. 18

Setting Up the Pocket PC Terminal ............................................................... 20

Aligning the Touch Screen ................................................................................... 20

Adjusting Screen Contrast .................................................................................... 20

To adjust display contrast using the utilities screen ....................................... 20

To adjust display contrast using the Fn and ten-keys ..................................... 20

Adjusting Screen Brightness (IT-700M30E/M30RC) .......................................... 20

To adjust display brightness using the utilities screen ................................... 20

To adjust display brightness using the Fn and ten-keys ................................. 20

Configuring the Auto Dimmer (IT-700M30E/M30RC) ....................................... 21

Enabling and Disabling the Backlight (IT-70M30E/M30RC).............................. 21

Using IR Data Communication....................................................................... 22

Power Requirements ...................................................................................... 23

Replacing the Main Battery .................................................................................. 23

To replace the Standard Battery Pack ............................................................ 24

To replace a Large-capacity Battery Pack ...................................................... 25

Replacing the Backup Battery .............................................................................. 25

Resetting the Pocket PC Terminal ................................................................. 27

When no memory abnormality is discovered................................................. 27

When a memory abnormality is discovered ................................................... 27

Full Reset (Memory Initialization) .................................................................. 28

Performing a Full Reset ........................................................................................ 28

Installing the Hand Strap ................................................................................ 30

IT-700/70 Specifications.................................................................................. 31

Using the Optical Communication Unit (IT-760IOE)..................................... 33

General Guide ....................................................................................................... 33

Optical Communication Unit Power Requirements ............................................. 35

Using the Optical Communication Unit ............................................................... 35

DIP Switch Settings .............................................................................................. 37

Wall Mounting the Optical Communication Unit ................................................ 38

Daisy Chaining Multiple Optical Communication Units (IT-760IOE) ................ 40

To daisy chain multiple Optical Communication Units ................................. 40

Optical Communication Unit (IT-760IOE) Specifications ................................... 41

Using the Pocket PC Terminal Charger ........................................................ 42

General Guide ....................................................................................................... 42

Charger Unit Power Requirements ....................................................................... 44

Using the Charger Unit ......................................................................................... 44

Wall Mounting the Charger Unit .......................................................................... 45

Pocket PC Terminal Charger (IT-769CHGE) Specifications ............................... 46

Using the Dual Charger .................................................................................. 47

General Guide ....................................................................................................... 47

Using the Dual Charger ........................................................................................ 48

Daisy Chaining Dual Charger Units ..................................................................... 49

Dual Charger (DT-5022CHG) Specifications....................................................... 50

Using a CompactFlash Card .......................................................................... 51

Loading a Card into Slot 0.................................................................................... 51

Loading a Card into Slot 1.................................................................................... 52

Using a Laser Scanner ................................................................................... 54

General Guide ....................................................................................................... 54

Installing the Laser Scanner Card......................................................................... 55

Reading Bar Codes ............................................................................................... 56

Warning Label ...................................................................................................... 57

Bar Code Scanning Positions ............................................................................... 58

Laser Scanner Card Specifications ....................................................................... 59

Using a Rechargeable Battery Pack .............................................................. 60

Standard Battery Pack Specifications ................................................................... 60

Large-capacity Battery Pack Specifications ......................................................... 60

Computer System Requirements

Following are the minimum computer system requirements for installing and using the applications contained on the bundled Microsoft

CD-ROM.

System Requirements

The minimum desktop PC system requirements for installing and running Microsoft ActiveSync 3.1 are as follows:

• Microsoft Windows 2000, Microsoft Windows NT Workstation 4.0 with Service Pack 3 or greater, or Microsoft Windows 95/98.

• Pentium processor for Windows NT or Windows 2000 (166MHz required for Windows 2000)

-or-

486/66 DX or higher processor (Pentium P90 recommended) for Windows 95/98.

• 16MB of memory for Windows 95/98 (more memory will improve performance) or Windows NT (32MB recommended) or Windows 2000 (64MB recommended).

• Hard disk drive with 10 to 50MB of available hard disk space (actual requirements will vary based on selection of features and your current system configration).

• Available 9 pin communications port, infrared port.

• CD-ROM drive

• VGA graphics card or compatible video graphics adaptor at 256 colors or higher.

• Keyboard

• Microsoft Mouse or compatible pointing device.

Optional components:

• Audio card/speakers for sound.

• Modem and/or Ethernet LAN connection for remote synchronization.

• Microsoft Internet Explorer 4.0 or higher for Mobile Channels or Mobile Favorites

support.

• Additional 153MB of disk space for Microsoft Outlook 2000. 24MB system RAM recommended. (Microsoft Outlook 2000 is included on the Discovering Microsoft Outlook® 2000 CD-ROM.)

Important

• Notebook computers equipped with an infrared port and modem may not be configured so the COM port is the default serial interface. In this case, you need to change the COM port configuration so the COM port is used as the default serial interface.

• Even if you are using a desktop PC, check its COM port numbers before installing Windows

CE Services. For details about how to do this, see the documentation that

comes with your computer.

System Diagram

Pocket PC Terminal

IT-700M30E

IT-700M30RC

IT-70M30E

IT-70M30RC

–

CLR

Option List (Non-U.S. Market Models)

Optical Communication Unit

Battery Pack

IT-760IOE

Optical Communication

Unit AC Adaptor

DT-825ADP-G DT-825ADP-U

Laser Scanner

DT-5057CBCR

CompactFlash Storage Card

CF-16SC-S (Flash ROM 16MB) CF-64SC-S (Flash ROM 64MB)

CF-256SC-S (Flash ROM 256MB)

DT-5024LBAT

(Large-capacity Battery Pack)

Pocket PC

Terminal Charger

(Standard Battery Pack)

Dual Charger

DT-5023BAT

Dual Charger

AC Adaptor

DT-5022CHG

MPC-577ADP

IT-769CHGE

Cables

JK-580CA PC Connection Cable

DT-882RSC Satellite Optical Communication Unit-PC Cable DT-883RSC Satellite Optical Communication Unit-PC Cable

DT-887AX Satellite Optical Communication Unit-PC Cable

DT-881RSC Satellite Optical Communication Unit-Modem Cable

DT-888RSC Satellite Optical Communication Unit Daisy Chain Cable

IT-700/70 Series Options (U.S. Market Models)

Optical Communication Unit

IT-760IOE

Optical Communication Unit

AC Adaptor

DT-825ADP-U

Dual Charger

DT-5022CHG

CompactFlash Card

CF-16SC-S (Flash ROM 16MB) CF-64SC-S (Flash ROM 64MB)

CF-256SC-S (Flash ROM 256MB)

Battery Pack

DT-5023BAT

(Standard Battery Pack)

Dual Charger AC Adaptor

MPC-577ADP

JK-580CA PC Connection Cable

DT-5024LBAT

(Large-capacity Battery Pack)

Pocket PC Terminal Charger

IT-769CHGE

Cables

DT-882RSC Satellite Optical Communication Unit-PC Cable DT-883RSC Satellite Optical Communication Unit-PC Cable

DT-887AX Satellite Optical Communication Unit-PC Cable

DT-881RSC Satellite Optical Communication Unit-Modem Cable

DT-888RSC Satellite Optical Communication Unit Daisy Chain Cable

+ 44 hidden pages

Casio CASSIOPEIA IT-70, CASSIOPEIA IT-700 User Manual

Safety Precautions

Markings and Symbols

Precautions During Use

Optional Lithium-ion Battery Pack

Backup Battery Handling

AC Power Supply

Backup Copies of All Important Data

Optional Laser Scanner Card

Operating Precautions

Contents

Computer System Requirements

System Requirements

System Diagram

Option List (Non-U.S. Market Models)

IT-700/70 Series Options (U.S. Market Models)