Carrier 69NT40-561 PARTS LIST
Container Refrigeration
17
16
15
14
3
4
5
9
10
11
12
6
7
8
5
6
7
8
9
1
10
11
12
SERVICE PARTS LIST
69NT40--561--001 to 199
Container Refrigeration Units
T--340PL Rev B -- Change 05/10
for
SERVICE PARTS LIST
CONTAINER REFRIGERATION UNIT
MODEL
69NT40-561--001 to 199
TABLE OF CONTENTS
PARAGRAPH NUMBER Page
1 REFRIGERATION UNIT ASSEMBLY 2....................................................
1.1 REFRIGERATION UNIT -- AREA LOCATOR 2..........................................
1.2 UPPER FRESH AIR 4...............................................................
1.3 UPPER FRESH AIR -- eAutoFresh 10..................................................
1.4 UPPER FRESH AIR -- eAutoFresh PANEL ASSEMBLY 14................................
1.5 CONTROLLED ATMOSPHERE -- TRANSFRESH 16.....................................
1.6 BULKHEAD PENETRATION -- UPPER AIR EXCHANGE 18...............................
1.7 THERMOMETER PORT 19...........................................................
1.8 RAIN GUTTERS 20..................................................................
1.9 USDA 22...........................................................................
1.10 CONTROL BOX -- DOOR 26..........................................................
1.11 CONTROL BOX -- SHIELD 32.........................................................
1.12 CONTROL BOX -- WIRING 34.........................................................
1.13 CONTROL BOX -- RMU RECEPTACLE, SWITCH PANEL, NO RMU, INTERNAL VIEWS 36...
1.14 CONTROL BOX -- RMU RECEPTACLE AND SWITCH PANEL, EXTERNAL VIEW 39........
1.15 CONTROL BOX -- REMOTE MONITORING UNIT (RMU) 40..............................
1.16 CONTROL BOX -- CONTROLLER MODULE SECTION AND SOFTWARE CARDS 42........
1.17 CONTROL BOX PREPARATION 44....................................................
1.18 CONTROLLER KIT -- FACING VIEW 48................................................
1.19 CONTROLLER KIT -- FACING VIEW WITH AND WITHOUT SHIELDS 50...................
1.20 CONTROLLER KIT -- REAR VIEW 51..................................................
1.21 CONTROLLER KIT -- EMERGENCY BYPASS SYSTEM 52...............................
1.22 INTERROGATOR RECEPT ACLE 54...................................................
1.23 HANDLES 57.......................................................................
1.24 COMPRESSOR, MOUNTING COMPONENTS, AND POWER CABLE 58...................
1.25 COMPRESSOR TUBING 60..........................................................
1.26 ECONOMIZER 62...................................................................
1.27 LIQUID LINE COMPONENTS 64......................................................
1.28 RECEIVER 66.......................................................................
1.29 WATER--COOLED CONDENSER 67...................................................
1.30 CONDENSER COIL AND COVERS 68.................................................
1.31 CONDENSER FAN MOTOR 70........................................................
1.32 CONDENSER FAN GRILLE ASSEMBLY 72.............................................
1.33 VOLTAGE CABLES 74...............................................................
1.34 CABLE GUARDS 76.................................................................
1.35 AUTOTRANSFORMER 78............................................................
1.36 CABLE RESTRAINT COMPONENTS 81................................................
1.37 VACUUM RELIEF VALVE 82..........................................................
1.38 OPTION 9 AND OPTION P -- ELECTRONIC PARTLOW TEMPERATURE RECORDER 84....
1.39 OPTION PS, OPTION 12 AND OPTION 13 -- ELECTRONIC PARTLOW TEMPERATURE
RECORDER 86.....................................................................
i
T-340PL
PARAGRAPH NUMBER
1.40 DRAIN 89...........................................................................
1.41 LOWER FRESH AIR MAKE--UP 90....................................................
1.42 BULKHEAD PENETRATION -- LOWER AIR EXCHANGE 92..............................
1.43 LABELS AND DECALS 93............................................................
1.44 EVAPORATOR FAN ASSEMBLY 94....................................................
1.45 EVAPORATOR TUBING AND COIL 96.................................................
1.46 HEATERS AND SENSORS (REAR PANELS REMOVED) 98..............................
1.47 BACK PANEL ASSEMBLY 100.........................................................
1.48 HARNESS -- LOW VOLTAGE 104.......................................................
1.49 HARNESS -- HIGH VOLTAGE 118......................................................
2 INTERROGATOR ACCESSORIES 120.....................................................
2.1 DATALINE/DATAREADER 120.........................................................
3 TOOLS 122..............................................................................
Page
iiT-340PL
INTRODUCTION
1 INTRODUCTION
The Carrier Transicold model 69NT40--561--001 to 199
series units are of lightweight aluminum frame
construction, designed to fit in the front of a container
and serve as the container’s front wall.
They are one piece, self--contained, all electric units,
which include cooling and heating systems to provide
precise temperature control.
The units are supplied with a complete charge of
refrigerant R--134a and compressor lubricating oil, and
are ready for operation upon installation. Forklift
pockets are provided for unit installation and removal.
The base unit operates on nominal 380/460 volt,
3--phase, 50/60 hertz (Hz) power. An optional
autotransformer may be fitted to allow operation on
nominal 190/230, 3--phase, 50/60 Hz power. Power for
the control system is provided by a transformer which
steps the supply power down to 18 and 24 volts, single
phase.
The controller is a Carrier Transicold Micro--Link 3
microprocessor. The controller will operate
automatically to select cooling, holding or heating as
required to maintain the desired set point temperature
within very close limits. The unit may also be equipped
with an electronic temperature recorder.
The controller has a keypad and display for viewing or
changing operating parameters. The display is also
equipped with lights to indicate various modes of
operation.
2 CONFIGURATION IDENTIFICATION
Unit identification information is provided on a plate
located to the left of the receiver or water--cooled
condenser, on the back wall of the condenser section.
The plate provides the unit model number, the unit serial
number and the unit parts identification number (PID).
The model number identifies the overall unit
configuration, while the PID number provides
information on specific optional equipment, factory
provisioned to allow for field installation of optional
equipment and differences in detailed parts.
3 FEATURE DESCRIPTIONS
3.1 Control Box
Units are equipped with either an aluminum or
composite material box, and may be fitted with a
lockable door.
3.2 Temperature Readout
The unit is fitted with suction and discharge temperature
sensors. The sensor readings may be viewed on the
controller display.
3.3 Pressure Readout
The unit is fitted with evaporator and discharge
transducers. The transducer readings may be viewed
on the controller display.
3.4 Compressor
The unit is fitted with a scroll compressor equipped with
suction and discharge service connections.
3.5 Condenser Coil
The unit is fitted with a four--row condenser coil using
7mm tubing.
3.6 Evaporator
Evaporator section is equipped with an electronic
expansion valve (EEV).
3.7 Evaporator Fan Operation
Units are equipped with three-- phase evaporator fan
motors. Opening of an evaporator fan internal protector
will shut down the unit.
3.8 Plate Set
Each unit is equipped with a tethered set of wiring
schematics and wiring diagram plates. The plate sets
are ordered using a seven--digit base part number and a
two--digit dash number.
4 OPTION DESCRIPTIONS
Various options may be factory or field equipped to the
base unit. These options are listed in the tables and
described in the following subparagraphs.
4.1 Battery
The refrigeration controller may be fitted with standard
replaceable batteries or a rechargeable battery pack.
Rechargeable battery packs may be fitted in the
standard or in a secure location.
4.2 Dehumidification
The unit may be fitted with a humidity sensor. This
sensor allows setting of a humidity set point in the
controller. In dehumidification mode, the controller will
operate to reduce internal container moisture level.
4.3 USDA
The unit may be supplied with fittings for additional
temperature probes, which allow recording of USDA
Cold Treatment data by the integral DataCORDER
function of the Micro--Link refrigeration controller.
4.4 Interrogator
Units that use the DataCORDER function are fitted with
interrogator receptacles for connection of equipment to
download the recorded data. Two receptacles may be
fitted; one is accessible from the front of the container
and the other is mounted inside the container (with the
USDA receptacles).
4.5 Remote Monitoring
The unit may be fitted with a remote monitoring
receptacle. This item allows connection of remote
indicators for COOL, DEFROST and IN RANGE.
Unless otherwise indicated, the receptacle is mounted
at the control box location.
4.6 Communications Interface Module
The unit may be fitted with a communications interface
module. The communications interface module is a
slave module, which allows communication with a
master central monitoring station. The module will
respond to communication and return information over
iii
T-340PL
the main power line. Refer to the ship master system
technical manual for additional information.
4.7 Autotransformer
An autotransformer may be provided to allow operation
on 190/230, 3--phase, 50/60 Hz power . The
autotransformer raises the supply voltage to the
nominal 380/460 volt power required by the base unit.
The autotransformer may also be fitted with an
individual circuit breaker for the 230 volt power.
If the unit is equipped with an autotransformer and
communications module, the autotransformer will be
fitted with a transformer bridge unit (TBU) to assist in
communications.
4.8 Temperature Recorder
The units may be fitted with an electronic temperature
recording device.
4.9 Handles
The unit may be equipped with handles to facilitate
access to stacked containers. These fixed handles are
located on either side of the unit.
4.10 Thermometer Port
The unit may be fitted with ports in the front of the frame
for insertion of a thermometer to measure supply and/or
return air temperature. If fitted, the port(s) will require a
cap and chain.
4.11 Water Cooling
The refrigeration system may be fitted with a
water--cooled condenser. The condenser is constructed
using copper--nickel tube for sea water applications.
The water--cooled condenser is in series with the air
cooled condenser and replaces the standard unit
receiver. When operating on the water--cooled
condenser, the condenser fan is deactivated by a water
pressure switch or condenser fan switch.
4.12 Back Panels
Aluminum back panels may have access doors and/or
hinge mounting.
4.13 460 Volt Cable
Various power cable and plug designs are available for
the main 460 volt supply. The plug options tailor the
cables to each customer’s requirements.
4.14 230 Volt Cable
Units equipped with an autotransformer require an
additional power cable for connection to the 230 volt
source. Various power cable and plug designs are
available. The plug options tailor the cables to each
customer’s requirements.
4.15 Cable Restraint
Various designs are available for storage of the power
cables. These options are variations of the compressor
section cable guard.
4.16 Upper Air (Fresh Air Make Up)
The unit may be fitted with an upper fresh air makeup
assembly. The fresh air makeup assembly is available
with a vent positioning sensor (VPS) and may also be
fitted with screens.
4.17 Lower Air (Fresh Air Make Up)
The unit may be fitted with a lower fresh air makeup
assembly. The fresh air makeup assembly is available
with a vent positioning sensor (VPS) and may also be
fitted with screens.
4.18 Labels
Safety Instruction and Function Code listing labels
differ, depending on the options installed. Labels
available with additional languages are listed in the parts
list.
4.19 Controller
Two replacement controllers are available:
1. Remanufactured -- Controller is the equivalent of a
new OEM controller and is supplied with a 12--month
warranty.
2. Repaired -- Controller has had previous faults
repaired and upgraded with the latest software.
Note: Repaired controllers are NOT to be used for
warranty repairs; only full OEM Remanufactured
controllers are to be used.
Controllers will be factory--equipped with the latest
version of operational software, but will NOT be
configured for a specific model number and will need to
be configured at the time of installation or sale.
4.20 Condenser Grille
Two styles of condenser grilles are available: direct
bolted grilles and hinged grilles.
4.21 Emergency Bypass
The optional Emergency Bypass switch (EB) functions
to bypass the controller in the event of controller failure.
4.22 eAutoFresh
The optional eAutoFresh venting system moderates the
atmospheric level inside the container unit in response
to cargo respiration.
4.23 Controlled Atmosphere
Units may be fitted with the TransFresh option.
For information on the TransFresh system, contact
TransFresh Corporation, P.O. Box 1788, Salinas, CA
93902.
T-340PL
iv
OPTION LEGEND
General
-
X Features Installed
P Factory Installation of Equipment to
Autotransformer Codes
1 Transformer Fitted
2 Transformer With CB2 Fitted
Back Panel Codes
1 Bolted Panels
4 Hinged Panels
5 Bolted Panels with 5+1 Heater Arrangement
Battery and Controller Kit (Facing View) Codes
R Rechargeable Cells
S Secure Location (Rechargeable Cells)
Bulkhead Penetration Codes
1 Not Installed
2 Standard Installed
Cable and Compressor Guards
1 Standard Guard, 460 V Cable
2 Standard Guard, Transicord
Cable Restraint Codes
2 Left Bungy Cord Only
3 J-Hook
R Dummy Receptacle
Compressor Codes
S Scroll
SS Scroll with Semi-Hermetic Piping
Condenser Fan Grille Codes
B Bolted Grille
H Hinged Grille
Condenser Fan Motor Codes
1 Single--Phase Condenser Fan Motor
2 Three--Phase Condenser Fan Motor
Control Box Communications Interface Module
Codes
2 HighDataRate
4 Low Data Rate
Control Box Preparation Codes
1 Aluminum Box with Latch Fastener
2 Aluminum Box with Screw Fastener
3 Aluminum Box with Locking Screw Fastener
Feature Not Applicable
Allow Field Installation (Provision)
Control Box Shield Codes
1 High Voltage Shield
2 Low Voltage Shield
Control Box Door Codes
2 Standard Door, Slotted Screw Fasteners
3 Standard Door, Wing Screw Fasteners
4 Door with Flat Window, Wing Fasteners
5 Latching Door
6 Standard Door, Phillips Screw Fasteners
Controlled Atmosphere -- TransFresh Codes
1 Kit for Units Not Provisioned for TransFresh
Rain Gutter Codes
1 Standard Length Bolted Gutters
4 Riveted Gutters
Heater and Sensor Codes
1 Standard Heater Arrangement
2 5+1 Heater Arrangement
X Dehumidification Option
Interrogator Codes
1 Left Straight Mount (Option V)
3 Control Box Mount
4 Left Straight Mount (Option D)
Label Codes
1 English
Low Voltage Harness Codes
D Used in conjunction with USDA codes
V Used in conjunction with USDA codes
Lower Fresh Air Codes
1 Lower Fresh Air Not Installed
2 Lower Fresh Air Installed
4 Lower Fresh Air With Screens, VPS Installed
Remote Monitoring (RM) Receptacle and Switch
Panel
1 No RM, Start Switch Plate
2 No RM, Start Switch Plate with Boot
3 No RM, Compressor Fan Switch Plate
4 No RM, Manual Defrost (MD) Switch Plate
5 No RM, MD Switch Plate with Boot
6 No RM, Amber Defrost Light Switch Plate
7 No RM, Red Defrost Light Switch Plate
8 With Internal RM Switch Plate
9 With Internal RM, MD Switch Plate
10 With Internal RM, Amber Defrost Light Switch
Plate
11 With External RM Switch Plate
v
T-340PL
Temperature Recorder Codes
9 No Temperature Recorder
PS Temperature Recorder Provision -- Recorder
Box Cover Only, Customer Specific
12 Special Electronic Partlow
13 Standard Electronic Partlow
Thermometer Port Codes
1 Supply Air Port
2 Return Air Port
B Both Ports
Upper Fresh Air Codes
1 Not Installed -- Access Panel Only
2 Upper Fresh Air Installed with Standard
Fasteners
2 Upper Fresh Air Installed with Stainless Steel
Fasteners
3 Upper Fresh Air Installed with Screens
4 Upper Fresh Air Installed with VPS
Upper Fresh Air -- eAutoFresh Codes
1 eAutoFresh Installed
USDA Codes
1 Option 1 Probe Kit
2 Option 2 Probe Kit
D Option D
P Option P
S Field--Installed Kits for USDA Provisioned Units
and 5+1 Heater Arrangement
V Option V
Vacuum Relief Valve Codes Codes
1 Vacuum Relief V alve
2 Valve with Nitrogen--Fed Atmosphere
3 Valve, Customer Specific
230 and 460 Volt Cable Codes
1 Option1
2 Option 2
3 Option 3
4 Option 4
5 Option 5
6 Option 6
7 Option 7
8 Option 8
9 Option 9
5 ORDERING INSTRUCTIONS
All orders and inquiries for parts must include: Parts Identification Number (PID), Model Number, Unit Serial Number,
Part Number, description of part as shown on list, and quantity required. Address all correspondence for parts to the
following address:
CARRIER TRANSICOLD DIVISION
Replacement Components Group, TR-20
P.O. Box 4805, Syracuse, New York 13221
6 LETTER DESIGNATIONS
The following letter designations are used to classify parts throughout this list:
A/R = As Required
N/A = Not Available
NS = Not Shown in illustration
NSS = Not Sold Separately - order next higher assembly or kit
PID = Parts Identification Number - essential to identify unit configuration.
PL = Purchase Locally
SST = Stainless Steel - 300 Series unless otherwise specified.
SV = Suffix SV - added to part number designates service replacement part.
or FAX to: (315) 432-3778
T-340PL
vi
1 REFRIGERATION UNIT ASSEMBLY
1.1 REFRIGERATION UNIT -- AREA LOCATOR
1
42
41
40
37
38
39
21
36
35
34
33
32
30
31
29
2
3
27
28
6
26
25
1
4
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
44
43
45
46
2T-340PL
1.1 REFRIGERATION UNIT -- AREA LOCATOR (Continued)
Item Section Number Area Description
1 Refer to Section 1.2 Upper Fresh Air
2 Refer to Section 1.3 Upper Fresh Air -- eAutoFresh
3 Refer to Section 1.4 Upper Fresh Air -- eAutoFresh Panel Assembly
4 Refer to Section 1.5 Controlled Atmosphere -- TransFresh
5 Refer to Section 1.6 Bulkhead Penetration -- Upper Air Exchange
6 Refer to Section 1.7 Thermometer Port
7 Refer to Section 1.8 Rain Gutters
8 Refer to Section 1.9 USDA
9 Refer to Section 1.10 Control Box -- Door
10 Refer to Section 1.11 Control Box -- Shield
11 Refer to Section 1.12 Control Box -- Wiring
12 Refer to Section 1.13 Control Box -- RMU Receptacle and Switch Panel -- No RM and Internal Views
13 Refer to Section 1.14 Control Box -- RMU Receptacle and Switch Panel -- External View
14 Refer to Section 1.15 Control Box -- Remote Monitoring Unit (RMU)
15 Refer to Section 1.16 Control Box -- Controller Module Section and Software Cards
16 Refer to Section 1.17 Control Box Preparation
17 Refer to Section 1.18 Controller Kit -- Facing View
18 Refer to Section 1.19 Controller Kit -- Detailed View With and Without Shields
19 Refer to Section 1.20 Controller Kit -- Rear View
20 Refer to Section 1.21 Controller Kit -- Emergency Bypass System)
21 Refer to Section 1.22 Interrogator Receptacle
22 Refer to Section 1.23 Handles
23 Refer to Section 1.24 Compressor, Mounting Components, and Power Cable
24 Refer to Section 1.25 Compressor Tubing
25 Refer to Section 1.26 Economizer
26 Refer to Section 1.27 Liquid Line Components
27 Refer to Section 1.28 Receiver
28 Refer to Section 1.29 Water--Cooled Condenser
29 Refer to Section 1.30 Air--Cooled Condenser Coil and Covers
30 Refer to Section 1.31 Condenser Fan Motor
31 Refer to Section 1.32 Condenser Fan Grille Assembly
32 Refer to Section 1.33 Voltage Cables
33 Refer to Section 1.34 Cable Guards
34 Refer to Section 1.35 Autotransformer
35 Refer to Section 1.36 Cable Restraint Components
36 Refer to Section 1.37 Vacuum Relief Valve / Controlled Atmosphere
37 Refer to Section 1.38 Electronic Temperature Recorder -- Options 9 and P
38 Refer to Section 1.39 Electronic Temperature Recorder -- Options 12 and 13
39 Refer to Section 1.40 Drain
40 Refer to Section 1.41 Lower Fresh Air Make--up
41 Refer to Section 1.42 Bulkhead Penetration -- Lower Air Exchange
42 Refer to Section 1.43 Labels and Decals
43 Refer to Section 1.44 Evaporator Fan Assembly
44 Refer to Section 1.45 Evaporator Tubing and Coil
45 Refer to Section 1.46 Heaters and Sensors (Rear Panels Removed)
46 Refer to Section 1.47 Back Panel Assembly
NS Refer to Section 1.48 Harness -- Low Voltage
NS Refer to Section 1.49 Harness -- High Voltage
NS Refer to Section 2.1 DataLine/Data Reader
3 T-340PL
1.2 UPPER FRESH AIR
4
3
2
8
9
10
1
6
SIDE VIEW
5
7
8
9
FRONT VIEW
OPTION 1
OPTIONAL POSITION FOR TIR EQUIPPED UNITS
4T-340PL
1.2 UPPER FRESH AIR (Continued)
Item Part Number Description Qty
OPTION 1 -- ACCESS PANEL ONLY
79--01697--06SV Panel Assembly, Access, Evaporator, White -- Includes: A/R
1
79--01697--17SV Panel Assembly, Access, Evaporator, Orange -- Includes: A/R
2 58--04378--01 Panel, Access 1
3 42--00327--00 Gasket, 0.26 X 0.50 Half--Round 1
4 42--00296--01 Gasket, Evaporator Access Panel 1
68--11989--00 Cover, Top, Evaporator Access Panel, White A/R
5
68--11989--01 Cover, Top, Evaporator Access Panel, Orange A/R
6 66U1--5562--2 Plug Button 1
7 34--06154--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR A/R
8 34--06053--13 Washer, Mylar 8
9 34--06212--12 Washer, Plain, 1/4 8
10 34--00655--08 Screw, Hex Head, 1/4--20 X 1.00 Inch Long A/R
5 T-340PL
1.2 UPPER FRESH AIR (Continued)
5
4
2
BACK OF FRESH
AIR PANEL
1
101311312
76
(OPTION 3 ONLY)
21
14,
15, 20
14,15,19
(POSITION OPTIONAL)
25
24
23
9
OPTION 4 -- VPS
26
8
OPTIONS 2 AND 3
16
17
5
27
18 or
28
29
30
22
6T-340PL
1.2 UPPER FRESH AIR (Continued)
Item Part Number Description Qty
STANDARD P ARTS INCLUDED IN OPTIONS 2 AND 3
1 79--01695--00 Panel Assembly, Access -- Includes: 1
2 58--04376--03 Panel, Access 1
3 66U1--5562--2 Plug Button, 1.25 Inch Diameter Hole 1
4 66U1--2552--185 Gasket 1
5 68--12940--00 Cover, Top, Evaporator Access Panel 1
6 42--00296--01 Gasket, Evaporator Access Panel 1
7 42--00327--00 Gasket, 0.26 X 0.50 Half--Round 1
8 42--00407--00 Gasket, 0.50 Fresh Air Disc 1
9 68--12933--00 Disc, 12.35 Inch Diameter 1
10 34--06185--01 Screw , Machined, #8--32 X 0.50 with Nylock 1
11 66U1--5362--2 Nut, Wing, 5/16--18, SST 1
12 66U1--5321--13 Washer, Plain 5/16 W Type A, SST 1
13 34--06053--19 Washer, Mylar 1.00 OD X 0.312 ID 1
14 34--06053--13 Washer, Mylar, 1/4 ID X 0.80 OD 8
15 34--06212--12 Washer, Flat, 1/4, SST 8
16 66CH1--1 172--2 Trim, Flexible 2.00 Inches Long 1
17 58--00969--00 Wire Tie 2.80 Inch Diameter, Double Loop 1
18 66U1--8292--1 Cap, Insulating 0.125 OD Black 3
OPTION 2 -- UPPER FRESH AIR INSTALLED WITH STANDARD FASTENERS
See Previous Section for Standard Parts and use with Items Below:
19 34--06154--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR 2
20 34--00655--08 Screw, Hex Head, 1/4--20 X 1.00 Inch Long 6
OPTION 2-- UPPER FRESH AIR INSTALLED WITH STAINLESS STEEL FASTENERS
See Previous Section for Standard Parts and use with Items Below:
19 34--66627--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR 2
20 66U1--5361--50 Screw, Hex Head, 1/4--20 X 1.00 Inch Long 6
7 T-340PL
1.2 UPPER FRESH AIR (Continued)
Item Part Number Description Qty
OPTION 3 -- UPPER FRESH AIR INSTALLED WITH SCREENS, 10 X 10
2 58--04376--01 Panel, Access with Screen, Medfly, 10 X 10 -- Includes: 1
3 66U1--5562--2 Plug Button, 1.25 Inch Diameter Hole 1
5 68--12940--00 Cover, Top, Evaporator Access Panel 1
6 42--00296--01 Gasket, Evaporator Access Panel 1
7 42--00327--00 Gasket, 0.26 X 0.50 Half--Round 1
8 42--00407--00 Gasket, 0.50 Fresh Air Disc 1
9 68--12933--00 Disc, 12.35 Inch Diameter 1
10 34--06185--01 Screw, Machined, #8--32 X 0.50 with Nylock 1
11 66U1--5362--2 Nut, Wing, 5/16--18, SST 1
12 66U1--5321--13 Washer, Plain 5/16 W Type A, SST 1
13 34--06053--19 Washer, Mylar 1.00 OD X 0.312 ID 1
14 34--06053--13 Washer, Mylar, 1/4 ID X 0.80 OD 8
15 34--06212--12 Washer, Flat, 1/4, SST 8
16 66CH1--1 172--2 Trim, Flexible 2.00 Inches Long 1
17 58--00969--00 Wire Tie 2.80 Inch Diameter, Double Loop 1
18 66U1--8292--1 Cap, Insulating 0.125 OD Black 3
19 34--06154--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR 2
20 34--00655--08 Screw, Hex Head, 1/4--20 X 1.00 Inch Long 6
OPTION 3 -- UPPER FRESH AIR INSTALLED WITH SCREENS, 16 X 16
See Previous Section for Standard Parts and use with Items Below:
19 34--06154--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR 2
20 34--00655--08 Screw, Hex Head, 1/4--20 X 1.00 Inch Long 6
21 58--04251--00 Screen, Medfly, USDA, 16 X 16 2
8T-340PL
1.2 UPPER FRESH AIR (Continued)
Item Part Number Description Qty
OPTION 4 -- UPPER FRESH AIR INSTALLED WITH VENT POSITIONING SENSOR
79--66626--00 Panel Assembly, Access, White -- Includes: 1
1
79--66626--01 Panel Assembly, Access, Orange -- Includes: 1
2 58--04376--05 Panel, Access 1
3 66U1--5562--2 Plug Button, 1.25 Inch Diameter Hole 1
4 34--06185--01 Screw, Pan Head, #8--32 X 0.50 with Nylock 1
68--12940--05 Cover, Top, Evaporator Access Panel, White 1
5
68--12940--03 Cover, Top, Evaporator Access Panel, Orange 1
6 42--00296--01 Gasket, Evaporator Access Panel 1
7 42--00327--00 Gasket, 0.26 X 0.50 Half--Round 1
8 42--00407--00 Gasket, 0.50 Fresh Air Disc 1
68--12933--07 Disc, 12.35 Inch Diameter, White 1
9
68--12933--05 Disc, 12.35 Inch Diameter, Orange 1
10 66U1--5362--2 Nut, Wing, 5/16--18, SST 1
11 34--06053--19 Washer, Mylar 1.00 OD X 0.312 ID 1
12 66U1--5321--13 Washer, Plain 5/16 W Type A, SST 1
13 66U1--2552--185 Gasket 1
14 34--06053--13 Washer, Mylar, 1/4 ID X 0.80 OD 8
15 34--06212--12 Washer, Flat, 1/4, SST 8
16 66CH1--1 172--2 Trim, Flexible 2.00 Inches Long 1
17 58--00969--00 Wire Tie 2.80 Inch Diameter, Double Loop 1
18 66U1--8292--1 Cap, Insulating 0.125 OD Black (NOT USED IN THIS ASSEMBLY) 3
19 34--06154--00 Screw, Hex Head, 1/4--20 X 1.00 Inch Long -- TIR 2
20 34--00655--08 Screw, Hex Head, 1/4--20 X 1.00 Inch Long 6
21 58--04251--00 Screen, Medfly, USDA, 16 X 16 (NOT USED IN THIS ASSEMBLY) 2
22 34--00928--02 Rivet, Blind 0.125 Inch Diameter 0.126--0.187 2
23 NSS Nut, Self Lock, 1/4--20 1
24 NSS Plate 2
25 NSS Bracket, Sensor 2
26 NSS Sensor, Rotary Position 1
27 22--01613--10 Plug, 4--Pin 1
28 22--01613--13 Contact, Socket #16 3
29 22--01613--11 Lock, 4--Pin -- Secondary 1
30 22--01660--08 Plug, 0.12 Inch Diameter X 0.58 1
9 T-340PL
1.3 UPPER FRESH AIR -- eAutoFresh
11
12
10
9
8
13 14
7
7
FOR PANEL ASSEMBLY
SEE SECTION 1.4
5
6
1
3
4
12
13
15
16
17
18
19
32
33
7
20
21
7
22 12
12
23
24
31
29
30
2
3
4
29
7
28
34
12
27
22
26
25
24
35
10T-340PL
1.3 UPPER FRESH AIR -- eAutoFresh (Continued)
Item Part Number Description Qty
OPTION P -- UNITS PROVISIONED FOR eAutoFresh OPTION
79--66643--00 eAutoFresh, White Panel -- SEE SECTION 1.4 1
NS
79--66643--01 eAutoFresh, Orange Panel -- SEE SECTION 1.4 1
1 34--06154--00 Screw, Cap Hex Head 1/4--20 X 1.00 TIR 2
2 34--00655--08 Screw, Cap Hex Head 1/4--20 X 1.00 6
3 34--06053--13 Washer, Retaining 0.19 ID X 0.80 OD (0.250) 8
4 34--06212--12 Washer, Plain 1/4 N Type A 8
5 58--04251--01 Screen, 16 X 16 Mesh 1
6 58--04251--02 Screen, 16 X 16 Mesh 1
7 66U1--3882 Wire Tie, 1/16--1 3/4 Self--Locking 11
8 22--01835--00 Connector, 5 Socket Weatherpack 1
9 40--00601--05 Tube, Support 1/4 OD X 0.040 Wide 1
10 58--00065--77 Grommet, 0.38 ID X 1.25 OD 1
11 10--00388--00 Powerpack, Stepper Motor 1
12 66U1--5371--6 Screw, Machine Hex Head #10--24 X 0.750 Slotted 10
13 66U1--5321--8 Washer, Plain #10 Type A 4
14 66CH1--1 172--2 Trim, Flexible 2.00 Long 1
15 10--00398--00 Sensor, Carbon Dioxide -- Includes: 1
16 22--01613--10 Plug 1
17 22--01613--11 Lock 1
18 22--06163--15 Socket 1
19 58--00065--78 Grommet, 0.25 ID X 1.25 OD 1
20 22--01613--08 Receptacle, 4 Pin 1
21 22--01613--09 Lock, Secondary 4 Pin (R) 1
22 40--00297--00 Coupling, 1/8 X 1/8 Pipe Thread 2
23 40--00108--03 Coupling, Half Union 1
24 34--00373--07 Clamp, Tube 0.62 Diameter Cushion 2
25 30--00415--01 Filter Assembly, Sample Air, 1/8 NPT 1
26 KA70PP048 Fitting, Hose 1/8 ID Barb X 1/8 NPT 1
27 68--14738--00 Bracket, Mounting, 0.090 Thick Aluminum 1
28 58--04497--04 Tube, 1/4 Inch OD X 7.75 Inches Long 1
29 58--04497--01 Tube, 1/4 Inch OD X 6.25 Inches Long 2
30 40--00640--00 Union, Bulkhead Double Brb/Comp Align 1
31 58--00065--84 Grommet, 0.25 X 0.50 X 0.187 Panel 1
32 68--14739--00 Bracket, 0.063 Thick Aluminum 1
33 34--00928--03 Rivet, Blind, 0.125 Diameter, 0.188--0.250 2
34 44--00361--00 Clip, Retaining 0.88--1.00 Wire Mounting 2
35 22--01777--03 Contact Socket, 20 AWG 7
11 T-340PL
1.3 UPPER FRESH AIR -- eAutoFresh (Continued)
11
12
13
9
7
7
FOR PANEL ASSEMBLY
SEE SECTION 1.4
13
15
16
17
18
29
7
28
27
7
24
7
22
23
25
24
26
12T-340PL
1.3 UPPER FRESH AIR -- eAutoFresh (Continued)
Item Part Number Description Qty
OPTION 1 -- eAutoFresh INSTALLED
79--66643--00 eAutoFresh, White Panel -- SEE SECTION 1.4 1
NS
79--66643--01 eAutoFresh, Orange Panel -- SEE SECTION 1.4 1
7 66U1--3882 Wire Tie, 1/16--1 3/4 Self--Locking 11
9 40--00601--05 Tube, Support 1/4 OD X 0.040 Wide 1
11 10--00388--00 Powerpack, Stepper Motor 1
12 66U1--5371--6 Screw, Machine Hex Head #10--24 X 0.750 Slotted 10
13 66U1--5321--8 Washer, Plain #10 Type A 4
15 10--00398--00 Sensor, Carbon Dioxide -- Includes: 1
16 22--01613--10 Plug 1
17 22--01613--11 Lock 1
18 22--06163--15 Socket 1
22 40--00297--00 Coupling, 1/8 X 1/8 Pipe Thread 2
23 40--00108--03 Coupling, Half Union 1
24 34--00373--07 Clamp, Tube 0.62 Diameter Cushion 2
25 30--00415--01 Filter Assembly, Sample Air, 1/8 NPT 1
26 KA70PP048 Fitting, Hose 1/8 ID Barb X 1/8 NPT 1
27 68--14738--00 Bracket, Mounting, 0.090 Thick Aluminum 1
28 58--04497--04 Tube, 1/4 Inch OD X 7.75 Inches Long 1
29 58--04497--01 Tube, 1/4 Inch OD X 6.25 Inches Long 2
13 T-340PL
1.4 UPPER FRESH AIR -- eAutoFresh PANEL ASSEMBLY
1
2
3
4
FOR SCREENS
SEE SECTION 1.3
5
6
7
8
9
10
11
10
11
13
12
14
16
17
18
15
16
17
19
21
20
17
18
22
23
24
14T-340PL
1.4 UPPER FRESH AIR -- eAutoFresh PANEL ASSEMBLY (Continued)
Item Part Number Description Qty
79--66643--00 eAutoFresh, White Panel Includes:
1
79--66643--01 eAutoFresh, Orange Panel Includes:
68--11989--08 Cover, Access White 1
2
68--11989--10 Cover, Access Orange 1
3 34--00928--09 Rivet, Blind, 0.156 Diameter 0.126 -- 0.250 16
86--66704--00 Box Assembly, Recess, White 1
4
86--66704--01 Box Assembly, Recess, Orange 1
5 42--00296--01 Gasket, Evaporator Access Panel 1
6 42--00327--00 Gasket, 0.25 X 0.5 Half Round 1
7 58--66642--00 Panel Assembly, eAutoFresh 1
8 66U1--2552--185 Gasket, 0.75 Thick X 1.5 X 16.63 1
9 66U1--5562--2 Plug Button, 1.25 Diameter Hole 1
10 58--66640--00 Collar, eAutoFresh 2
11 34--00928--06 Rivet, Blind 0.125 Diameter 0.376 -- 0.500 8
79--66641--00 Cup Assembly, White -- Includes: 1
12
79--66641--01 Cup Assembly, Orange -- Includes: 1
13 22--02392--03 Connector, Female 1
14 34--66642--09 Screw , Flat Head 10--32 82 Degree Phillips 4
15 58--66645--00 Rail Bottom, eAutoFresh 1
16 66U1--6651--26 Screw, Machine Pan Head #8--32 X 1.75 10
17 34--00662--08 Washer, Plain, #8 Medium 0.032 Thick 10
18 58--66644--00 Rail Top, eAutoFresh 1
19 79--66640--00 Plate Assembly -- Slide 1
20 62--66697--00 Label Warning, eAutoFresh 1
21 79--66642--00 Plate Assembly -- Gasket 1
68--14715--00 Grille, White, 0.063 Thick Aluminum 1
22
68--14715--01 Grille, Orange, 0.063 Thick Aluminum 1
23 58--04026--56 Protector, 0.562 OD X 0.177 ID 7
24 62--66701--00 Label, eAutoFresh 1
15 T-340PL
1.5 CONTROLLED ATMOSPHERE -- TRANSFRESH
1
3
4
6
7
2
8
3
BULKHEAD PENETRATION
9
10
11
14
12
5
(SEE NOTE)
13
NOTE: USED IN OPTION 2 ONLY; DISCARD IF INSTALLING OPTION 1.
16T-340PL
1.5 CONTROLLED ATMOSPHERE -- TRANSFRESH (Continued)
Item Part Number Description Qty
OPTION P -- UNITS PROVISIONED FOR TRANSFRESH
-- 76--00681--01 Kit, TransFresh Field Installation (For units with TransFresh Provision) -Includes:
1 22--02319--03 Connector, 0.236/0.512 Bundle 1
2 66U1--1571--3 Grommet, 0.50 ID x 1.00 OD 1
3 34-00655-28 Screw, Hex Head, 1/4-20 x 3.50 Long, SST 4
4 68--15146--00 Bracket, TransFresh, 0.125 Thick Aluminum 2
5 -- Blanking Disc 1
NS 66U1--3882 Wire Tie, 1/16--1 3/4 Self--Locking 12
*6 69NT35-8734-16 Panel Assembly, TransFresh A/R
*7 69NT35-8734-12 Cable, Power -- A2C (TransFresh) A/R
*8 69NT35-8734-5 Hose Assembly , Air (TransFresh) A/R
*NS 69NT35-8734-4 Cable Assembly , TransFresh Communications Connector (TCC) A/R
*NS 69NT35-8734-14 Cable Assembly, Rear (TransFresh) A/R
*NS 69NT35-8734-6 Fuse Assembly, In-line (TransFresh) A/R
OPTION 1 -- UNITS NOT PROVISIONED FOR TRANSFRESH (UNIT EQUIPPED WITH
BULKHEAD OPTION AND NO RECORDER OPTION)
-- 76--00681--02 Kit, TransFresh Field Installation (For units with NO TransFresh Provision)
-- Includes ALL OF OPTION 1 AND ITEMS BELOW:
9 66CH1--1012--40 Insulation Tube, 1.125 ID x 2.50 Inches 1
10 58-04290-00 Bulkhead Fitting 1
11 22--01602--02 Bushing, 0.625 ID x 0.88 Long 1
12 22--01602--03 Ring, 0.312--0.375 Gotcha 1
13 22--01733--01 Nut, Straight -- Includes: 1
14 34--00928--04 Rivet, Blind, 0.125 Diameter, SST 2
NOTE
* Contact -- TransFresh Corp., P.O. Box 1788, Salinas, CA 93902 to order these parts.
--
--
17 T-340PL
1.6 BULKHEAD PENETRATION -- UPPER AIR EXCHANGE
3
4
10
11
12
1
2
OPTION 1
5
6
7
8
9
OPTION 2
Item Part Number Description Qty
OPTION 1 -- NOT INSTALLED
1 58--00616--00 Plug, Hole, 2.00 Inch Diameter X 0.12 Panel 1
2 66U1--5562--2 Plug Button, 1.25 Inch Diameter Hole 1
OPTION 2 -- STANDARD INSTALLED
3 58--04290--01 Fitting, Bulkhead 1
4 34--00928--04 Rivet, Blind, 1/8 Inch Diameter, Grip Range 1/4 -- 5/16 4
5 22--01602--02 Bushing, 0.625 ID X 0.88 Inches Long 1
6 58--04302--01 Grommet, 0.25 ID X 1.25 Inches Long 1
7 69NT35--8258 Disc, 0.040 Thick Aluminum 1
8 22--01602--03 Gotcha Ring, 0.312--0.375 1
9 22--01733--01 Nut, Straight (With TIR Holes) 1
10 34--06154--00 Screw, Captive, Hex Head, 1/4--20 X 1.00 TIR 1
11 34--06053--00 Washer, 0.250 ID X 0.800 OD 1
12 66U1--5321--7 Washer, Plain, 1/4 W, Type A 1
18T-340PL
1.7 THERMOMETER PORT
3
4
2
1
Item Part Number Description Qty
OPTION 1 -- SUPPLY AIR PORT
1 66U1--8662 Cap and Chain Assembly 1
2 62--10557--00 Label 1
OPTION 2 -- RETURN AIR PORT
3 66U1--8662 Cap and Chain Assembly 1
4 62--10557--00 Label 1
OPTION B -- SUPPLY AND RETURN PORTS
1 66U1--8662 Cap and Chain Assembly 2
2 62--10557--00 Label 2
3 66U1--8662 Cap and Chain Assembly 1
4 62--10557--00 Label 1
19 T-340PL
1.8 RAIN GUTTERS
1
2
3
4
20T-340PL
1.8 RAIN GUTTERS (Continued)
Item Part Number Description Qty
OPTION 1 -- BOLTED
1 69NT35--3997--1 Gutter, Rain (Bolted, Standard -- Left Side) 1
2 69NT35--3987 Gutter, Rain (Bolted, Standard -- Right Side) 1
OPTION 4 -- RIVETED
3 68--12417--00 Gutter, Rain (Riveted -- Right and Left Side) 2
4 34--00928--13 Rivet, Blind 0.187 Inch Diameter, 0.126--0.250 6
21 T-340PL
1.9 USDA
7
2
OPTIONS D AND V
1
2
3
4
5
6
8
9
12
OPTION P
13
11
10
22T-340PL
1.9 USDA (Continued)
Item Part Number Description Qty
OPTION D
1 Receptacle (PR1, PR2, PR3, Cargo Probe 4) (3--Pin) (Refer to Section 1.48, Option D)
2 69NT35--636--1 Tether Assembly 5
3 22--01660--02 Cap, Dust, (3-- Pin Receptacle) 4
4 66U1--5371--7 Screw, Machine, Hex Head, #10--24 X 0.500 Slotted 7
5 68--14444--00 Panel Assembly, 0.063 Thick Aluminum 1
6 22--01660--05 Cap, Dust (5--Pin Receptacle) 1
7 34--06142--00 Rivet, 0.110 Inch Diameter, 0.126--0.250 25
8 22--02205--00 Connector Splice, Non--Insulated 5
9 68--15343--00 Channel Assembly 1
10 62--1 1275--00 Label, USDA Cold Treatment Certified 1
11 62--1 1274--00 Label, USDA 1
NS 66U1--3882 Wire Tie, 1/16-- 1--3/4, Self--Locking 4
OPTION V
1 Receptacle (PR1, PR2, PR3, Cargo Probe 4) (3--Pin) (Refer to Section 1.48, Option V)
2 69NT35--636--1 Tether Assembly 5
3 22--01660--02 Cap, Dust, 3--Pin Receptacle 4
4 66U1--5371--7 Screw, Machine, Hex Head, #10--24 X 0.500 Slotted 7
5 68--14444--01 Panel Assembly, 0.063 Thick Aluminum 1
6 22--01660--05 Cap, Dust, 5--Pin 1
7 34--06142--00 Rivet, 0.110 Inch Diameter, 0.126--0.250 25
8 22--02205--00 Connector Splice, Non--Insulated 5
9 68--15343--00 Channel Assembly 1
10 62--1 1275--00 Label, ML3, USDA, Blue 1
11 62--1 1274--00 Label, USDA 1
NS 66U1--3882 Wire Tie, 1/16-- 1--3/4, Self--Locking 4
OPTION P
9 68--15343--00 Channel Assembly 1
10 62--1 1275--00 Label, ML3, USDA, Blue 1
12 68--14628--00 Plate 1
13 34--00928--07 Rivet, Blind, 0.156 Inch Diameter 6
NS 66U1--3882 Wire Tie, 1/16-- 1--3/4, Self--Locking 4
23 T-340PLChange 02/10
Loading...