CaptiveAire HRE-13 User Manual

(

HRE

UTILITY SET - HIGH VELOCITY RESTAURANT DUTY

Air Volume:
Maximum SP:

FEATURES & BENEFITS

Virtually grease-free rooftops.

No added options needed.

No pre-mature motor failures.

Handles high temperature, heavy grease applications.

Curb mounted design.

Exceptional performance. Handles up to 9000 CFM and 4.5" w.g. static pressure.

Pleasing aesthetics - high quality enamel painted housing.

Ventilated motor housing for motor, shaft and drive protection.

Rigid motor plate assembly.

Non-overloading, welded steel backward inclined wheel is statically and dynamically balanced and permits
usage on high static pressure applications.
Balancing weights are mechanically fastened.

Heavy duty bearings in excess of 200,000 hours of operation.

Motor base and shaft seals provide a double layer of protection to eliminate water leaks into the building and
grease build-up on motor.
Grease laden air does not enter the motor compartment, increasing the life of the motor and allowing use on
high temperature and grease applications.
Discharge section continuously welded to avoid grease leakage.

Continuously welded scroll to prevent grease leakage onto the rooftop.

Grease drain centered and fully welded onto discharge elbow.

Newly engineered hinged base for improved installation.

CERTIFICATIONS

Models HRE-13 thru HRE-24 have been certified by ITS. This certification mark indicates
that the product has been tested to and has met the minimum requirements of a widely
recognized (consensus) U.S. products safety standard, that the manufacturing site has
been audited, and that the applicant has agreed to a program of periodic factory follow-up
inspections to verify continued performance.

200 - 9000 cfm

4.5" wg. @ standard air density

Models HRE-13 thru HRE-24 are ETL Listed under report number 3100959CRT and
comply with UL705 (electrical) and UL762 Standards and CSA Std C22.2, No 113.

800) 965-0420