Canon ZR85 Instruction Manual

DV Network Software

Instruction Manual

Version 2

This software is for use with Windows® XP only.

Before Installing DV Messenger

To use DV Messenger, it is required that Windows XP is installed in your computer and Windows Messenger 4.5, 4.6 or 4.7 operates correctly. Make sure to confirm the following before installing DV Messenger.

Is Windows XP and

Windows Messenger

4.5, 4.6 or 4.7

installed?

No No

This software is compatible with Windows XP only. It cannot be used with other Operating Systems. Furthermore, Windows Messenger 4.5,

4.6 or 4.7 is required. Establish an environment that allows the use of this software. Please consult Microsoft for details.

Does Windows Messenger operate and can its voice or video

Yes Yes

conversation function

be used? (Please consult Microsoft for details on Windows Messenger.)

This software requires that Windows Messenger operates correctly. Please establish an environment where Windows Messenger operates. Please consult Microsoft for details.

Before Installing DV Messenger

Yes

Are you using a router for Internet connection? (Some modems are equipped with a router function. For details, refer to the manual of the modem.)

Yes

Is your router UPnP compatible?

NoNo

This software requires an UPnP compatible router. It cannot be used with other routers. For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router.

Follow now the instructions in this manual and install DV Messenger.

Yes

Before Installing DV Messenger

Read Carefully Before Using

CANON SOFTWARE LICENCE AGREEMENT

IMPORTANT: READ THIS AGREEMENT CAREFULLY BEFORE CLICKING “YES” AT

THE BOTTOM OF THE SCREEN AND INSTALLING THE SOFTWARE.

This agreement (“Agreement”) is a legal contract between you, either an individual or entity, and Canon Inc. (“Canon”) governing your use of this software program and “online” or electronic documentation, if any (collectively, the “SOFTWARE”).

BY CLICKING “YES” BELOW, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY NOT INSTALL OR OTHERWISE USE THE SOFTWARE. IN SUCH CASE, CLICK “NO” BELOW, CLOSE THIS SET UP PROGRAM AND EXIT THIS SCREEN.

In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.

1. GRANT OF LICENSE

Canon grants you the personal, non-exclusive, non-transferable license to use (“use” shall mean storing, loading, installing, executing or displaying) the SOFTWARE on a single computer solely for use with Canon’s digital video camcorder products. You may physically transfer the SOFTWARE from one computer to another, provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user.

You may make one copy of the SOFTWARE solely for backup purposes, or copy the SOFTWARE onto the permanent storage device (e.g. hard disk) of your computer and retain the original for back-up purposes, provided that you shall reproduce on such backup copy the same copyright notice and other ownership legends exactly as and where they appear on the SOFTWARE as delivered. Any other copying of the SOFTWARE is a violation of this Agreement.

2. RESTRICTIONS

You shall not, or allow any third party to, assign, sublicense, sell, rent, lease, loan, convey or otherwise use, transfer, copy, translate, convert to another programming language, alter, modify, decompile or disassemble the SOFTWARE, in whole or in part, except as expressly provided for or granted herein. You shall not remove, obliterate or cancel any copyright notice appearing on the SOFTWARE or on a medium, if any, on which the SOFTWARE is delivered.

3. OWNERSHIP

All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. You only own the CD-ROM media in which the SOFTWARE is stored. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon.

4. EXPORT RESTRICTIONS

You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of any such laws and restrictions and regulations, or without all necessary approvals.

Read Carefully Before Using

5. SUPPORT AND UPDATE

Neither Canon, nor its subsidiaries, dealers or distributors will be responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.

6. LIMITED WARRANTY AND DISCLAIMER OF LIABILITY

It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus, Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CANON AND ITS SUPPLIER PROVIDE THE SOFTWARE “AS IS” WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS, IMPLIED OR STATUTORY. The CD-ROM storing the SOFTWARE, if any, is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The Replacement CD-ROM will be warranted for the remainder of the original ninety-day (90) warranty period of the defective CD-ROM. This limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse, or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE.

EXCEPT AS SPECIFICALLY SET FORTH HEREINABOVE, CANON, CANON’S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO, WARRANTIES OR CONDITIONS AS TO DESIGN, QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR SYSTEM INTEGRATION.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL CANON, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS BE LIABLE FOR ANY LOSS OR DAMAGES WHATSOEVER (WHETHER KNOWN, FORESEEABLE OR OTHERWISE), INCLUDING WITHOUT LIMITATION, ANY CONSEQUENTIAL, INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF CONFIDENTIAL OR OTHER BUSINESS INFORMATION, LOSS OF PRIVACY, ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IN THE EVENT OF FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF CANON OR ANY SUPPLIER, OR OTHERWISE EVEN IF CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS OR DEALERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, YOU HEREBY RELEASE CANON, ITS SUPPLIER, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS OR DEALERS FROM ANY AND ALL LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS USE.

SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY TO YOU.

Read Carefully Before Using

7. TERM

This Agreement is effective upon your acceptance hereof by clicking “YES” below and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE including any and all copies thereof. This Agreement shall also terminate without notice to you if you fail to comply with any of the terms of this Agreement. In the event that this Agreement terminates for your failure to comply, you must promptly destroy the SOFTWARE including any and all copies thereof. In addition, Canon may enforce its other legal rights.

8. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE

The SOFTWARE is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct

1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June

1995), all U.S. Government end users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta- ku, Tokyo 146-8501, Japan.

9. SEVERABILITY

In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.

10. CONTROLLING LAW

The terms of this Agreement as it relates to purchases of the SOFTWARE in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the SOFTWARE in Canada shall be governed by the laws of the Province of Ontario.

11. ACKNOWLEDGMENT

CLICKING “YES” BELOW AND SUBSEQUENTLY USING THE SOFTWARE, YOU AGREE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT AND AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON.

Read Carefully Before Using

Contents

Before Installing DV Messenger .............................................................................. 2

Read Carefully Before Using .................................................................................... 4

Read This First .......................................................................................................... 9

About This Manual .............................................................................................. 10

System Requirements .............................................................................................11

What Can Be Accomplished with the Software .................................................... 12

Available Functions by Camcorder Models ........................................................ 12

Required Accessories ............................................................................................ 14

Read Carefully ......................................................................................................... 15

Requirements for Using DV Messenger ................................................................ 16

Installing the Software ............................................................................................ 17

Installing the DV Network Software .................................................................... 17

Installing the Canon USB Video Driver .............................................................. 19

Installing the AV/C Camera Storage Subunit-WIA Driver ................................... 20

Connecting the Camcorder to a Computer ........................................................... 23

Connecting the Camcorder Using a USB Cable ................................................. 23

Connecting the Camcorder Using a DV Cable .................................................. 23

DV Messenger

Preparations for DV Messenger ............................................................................. 24

Checking the Camcorder Connection ................................................................. 24

Setting the UPnP Router .................................................................................... 26

Videoconferencing .................................................................................................. 32

Starting DV Messenger ....................................................................................... 32

Preparing the Camcorder for Communication .................................................... 34

Starting a Videoconference ................................................................................. 37

Ending DV Messenger ........................................................................................... 40

Disconnecting DV Messenger ............................................................................ 40

Ending DV Messenger ........................................................................................ 40

Screen Displays ...................................................................................................... 41

DVM Panel .......................................................................................................... 41

Taskbar ............................................................................................................... 44

DV Messenger Icon Menu .................................................................................. 45

Changing the Mode of the Camcorder .................................................................. 46

Camcorder with NETWORK Mode ..................................................................... 46

Camcorder without NETWORK Mode ................................................................ 46

Operating Camcorders with DV Messenger ......................................................... 48

Operating the Camera Functions ........................................................................ 49

Operating the Tape Playback Functions ............................................................. 51

Sharing Images (File Transfer) ............................................................................... 53

Selecting Images for Sharing .............................................................................. 53

Transferring Images ............................................................................................ 55

Using the Image Capture Function ........................................................................ 57

Setting of Image Capture .................................................................................... 57

Changing the Capture Mode ............................................................................... 59

Capturing with Your Camcorder .......................................................................... 60

Capturing with Your Contact’s Camcorder .......................................................... 61

Using the View & Record Function ....................................................................... 62

Setting of View & Record .................................................................................... 62

Contents

Starting View & Record ....................................................................................... 63

Connecting with View & Record ......................................................................... 64

Additional Functions .............................................................................................. 66

Changing the Background of Windows Messenger ............................................ 66

Option Settings ................................................................................................... 67

Uninstalling DV Messenger .................................................................................... 68

Canon USB Video Driver

Capturing/Recording Movies ................................................................................. 69

Capturing movies from the tape to the computer ................................................ 69

Recording movies to the tape ............................................................................. 70

Uninstalling the Canon USB Video Driver ............................................................ 71

AV/C Camera Storage Subunit-WIA Driver

Uninstalling the AV/C Camera Storage Subunit-WIA Driver ............................... 73

Troubleshooting

DV Messenger .................................................................................................... 75

Canon USB Video Driver .................................................................................... 86

AV/C Camera Storage Subunit-WIA Driver ......................................................... 87

Uninstallation of the Canon USB Video Driver and AV/C Camera Storage

Subunit-WIA Driver ............................................................................................. 87

Contents

Read This First

 Disclaimer

• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.

• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any other language in any form, by any means, without the prior written permission of Canon.

• Canon makes no warranties for damages resulting from corrupted or lost data due to mistaken operation or malfunction of the camcorder, the software, memory cards (MultiMediaCards or SD Memory Cards), personal computers, or peripheral devices, or due to use of a memory card not formatted by a Canon camcorder.

• Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United Stated and/or other countries.

• Adobe, Acrobat and Reader are trademarks of Adobe Systems Incorporated.

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

• AV/C Camera Storage Subunit is a standard for downloading and uploading files using an AV device equipped with the IEEE1394. The driver complies with the “AV/C Camera Storage Subunit Version 1.0” by the IEEE1394 Trade Association.

• WIA stands for Windows Image Acquisition. WIA is a driver software for downloading images from digital devices onto a computer. WIA is preinstalled on Windows XP.

 Safety Precautions

Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROM(s). Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sound of a CD-ROM played on a music CD player.

Read This First

About This Manual

• In this manual, DV Messenger Version 2 is abbreviated as “DV Messenger”.

• In this manual, the operating modes of camcorders are described as following:

- CAMERA mode: Mode for recording video and sound to tape.

- PLAY (VCR) mode: Mode for playing back video and sound recorded on a

tape.

- CARD PLAY mode: Mode for playing back images recorded on a memory

card.

- NETWORK mode: Mode for connecting to the computer for using DV

Messenger.

• The explanations in this manual refer to camcorders equipped with the NETWORK mode on the POWER switch of the camcorder. If your camcorder is not equipped with the NETWORK mode, refer to the instructions in parenthesis (Camcorder without NETWORK mode:).

Camcorder with NETWORK mode Camcorder without NETWORK mode

• Please note that the screens used in this manual may change.

Read This First

System Requirements

OS: Microsoft Windows XP Home Edition or Professional

(Installation of Service Pack 1 recommended) Proper operation is not guaranteed on Windows XP that has

been upgraded from a previous version. CPU: Pentium 500 MHz or better (800 MHz or better recommended) RAM: 128 MB or more (256 MB or more recommended) Interface: USB (1.1/2.0) or IEEE1394 (OHCI compliant) Free Hard Disk Space: • DV Messenger: 100 MB or more

Display: 800

• Canon USB Video Driver: 1 MB or more

• AV/C Camera Storage Subunit-WIA Driver: 1 MB or more

u 600 pixels/High Color (16 bit) or better

Others: Windows Messenger Version 4.5, 4.6 or 4.7, sound function,

Internet connection*

* Using a standard dial-up connection is possible, but we

recommend using a broadband connection to the Internet.

System Requirements for Capturing/Recording Movies Using an Editing Software:

OS: Microsoft Windows XP Home Edition or Professional

(Installation of Service Pack 1 or 2 required)

Proper operation is not guaranteed on Windows XP that has

been upgraded from a previous version. CPU: Pentium4 1.3 GHz or better, or Pentium M 1.0 GHz or better,

or Celeron 2.0 GHz or better Interface: Preinstalled Hi-Speed USB 2.0 USB Cable: Supplied USB Cable

 Proper operation is not guaranteed on a dual CPU PC or on a user-built PC.  Proper operation is not guaranteed on any particular system, even if it meets

the requirements outlined above.

 Do not connect two or more camcorders to the computer at the same time.

The connection may not work correctly.

 A CD-ROM drive is required to install the software.

USB connection:

 Connect the USB cable directly to one of the computer’s main USB ports.

The interface may not function correctly if the camcorder is connected via a USB hub.

 The connection may not operate correctly if you are using other USB

devices, excluding USB mice or keyboards, at the same time. If this occurs, disconnect the other devices from the computer and try reconnecting the camcorder.

 Not all operations performed with a connection to a USB 2.0 compatible

board can be guaranteed.

DV (IEEE1394) connection:

 Connect the camcorder directly to the computer using a DV (IEEE1394)

cable. The connection may not operate correctly if the camcorder is connected via a repeater or other IEEE1394 devices, or if more than one IEEE1394 device is connected to the computer.

 Do not connect another IEEE1394 device while the AV/C Camera Storage

Subunit-WIA Driver is operating. The connection may not operate correctly.

System Requirements

What Can Be Accomplished with the Software

This topic introduces the main feature of the DV Network Software. Please note that available functions depend on the camcorder model. For details, see Available Functions by Camcorder Models.

 DV Messenger Version 2 ( 24)

- Real-time video communication (Videoconference).

- Sharing recorded video.

- Operating the camcorder form the computer.

- Sharing images.

- Capturing still images (Image Capture).

- Remotely accessing the computer (View & Record).

 Canon USB Video Driver ( 19)

Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to the computer using a USB cable. If your camcorder is listed under category A in Camcorder Categories ( 13), you can also perform the followings by connecting the camcorder to a computer with preinstalled Hi-Speed USB 2.0 using a USB cable.

- Capturing movies from the tape to the computer.

- Recording movies that have been edited on a computer to the tape.

- Converting analog signals from a connected VCR or 8mm camcorder to digital signals and transferring them to the computer. For details, refer to the camcorder instruction manual.

 AV/C Camera Storage Subunit-WIA Driver ( 20)

Installing the AV/C Camera Storage Subunit-WIA Driver allows you to use DV Messenger by connecting a camcorder to a computer, both equipped with a DV (IEEE1394) terminal, with a DV (IEEE1394) cable.

Available Functions by Camcorder Models

Available functions depend on the camcorder model. Refer to the following tables and identify to which category your camcorder belongs and which functions and drivers can be used with your camcorder.

What Can Be Accomplished with the Software

 Camcorder Categories

A OPTURA500

OPTURA Xi OPTURA30 OPTURA40

OPTURA300 OPTURA400

C ELURA60 ELURA65 ELURA70

ELURA40 MC ELURA50 GL2

OPTURA10 OPTURA20 OPTURA200 MC

ZR45 MC ZR47MC KR ZR50 MC

ZR65 MC ZR70 MC ZR85

ZR90 ZR200 ZR300

ELURA ELURA2/ELURA2 MC ELURA10

ELURA20 MC GL1 OPTURA100 MC

OPTURA Pi XL1S ZR10

ZR20 ZR25 MC ZR30 MC

ZR40 ZR60 ZR80

ZR100

F Non-Canon camcorder

Please refer to the Canon homepage for latest camcorder models.

 Available Functions and Drivers by Categories

Camcorders

Functions

Categories

DV Messenger Version 2

Real-time video ( 32) communication

Sharing recorded video ( 51)

Camcorder operation ( 49)

Sharing images ( 53)

Image Capture ( 57)

View & Record ( 62)

Canon USB Video Driver

USB Connection ( 19)

Capturing/Recording ( 69) movies

When sharing images, an image file exceeding 20 MB will not be displayed.

ABCDEF

What Can Be Accomplished with the Software

Required Accessories

You need following items for using the Software:

• Digital Camcorder

• The Internet connection and a software that allows you to browse the Net

• USB Cable or DV (IEEE1394) Cable If your camcorder is not listed under category A or B in Camcorder Categories ( 13), use a DV cable. Check the manual of your computer for which type of DV cable to use.

4-pin:

6-pin:

• Speaker or Headphones (when using DV Messenger)

Required Accessories

Read Carefully

 If you leave the camcorder turned on for a long time, heat generation may cause

damage to the camcorder. Turn off the camcorder after use.

 Tapes may be damaged if left in the camcorder for a long time. Do not leave tapes

in the camcorder to prevent damage.

 If you leave the camcorder turned on for a long time (e.g. when using the View &

Record or Image Capture (interval mode) function), observe the following fire precautions.

- Do not use the camcorder in hot or humid places.

- Do not leave the camcorder exposed to direct sunlight.

- Do not cover the camcorder with blankets or clothes.

- Do not leave the camcorder in a box or tight spaces.

- Do not leave the camcorder outdoors.

Read Carefully

Requirements for Using DV Messenger

To use DV Messenger, it is required that Windows XP is installed and Windows Messenger 4.5, 4.6 or 4.7 operates correctly. Make sure to confirm the following before installing DV Messenger.

1. Windows XP and Windows Messenger 4.5, 4.6 or 4.7 are installed*.

2. Windows Messenger operates and its voice or video conversation can be

used*.

3. If you are using a router for Internet connection: your router is UPnP

compatible.** (Some modems are equipped with a router function. For details, refer to the manual of the modem.)

* This software is compatible with Windows XP only. It cannot be used with other

Operating Systems. Furthermore, Windows Messenger 4.5, 4.6 or 4.7 is required. Establish an environment that allows the use of this software. Please consult Microsoft for details.

** If you use a router to connect to the Internet, the router must be UPnP

compatible and it must be recognized as “Internet Gateway Device” ( 26). For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router.

Be aware that yoour contact can access the contents of te tape or memory card in your camcorder when using DV messenger.

Requirements for Using DV Messenger

Installing the Software

Installing the DV Network Software

With this procedure, the DV Messenger will be installed and the driver files for the AV/C Camera Storage Subunit-WIA Driver and Canon USB Video Driver will be copied to your computer. The drivers will be installed when you connect the camcorder to the computer. For the installation procedure of the Canon USB Video Driver, see Installing the Canon USB Video Driver ( 19). For the installation procedure of the AV/C Camera Storage Subunit-WIA Driver, see Installing the AV/C Camera Storage Subunit-WIA Driver ( 20).

 Do not connect the camcorder to the computer when installing the DV

Network Software.

 DV Messenger can only be installed with Windows Messenger 4.5, 4.6 or

4.7. Download Windows Messenger 4.7 from the Microsoft homepage and update your Windows Messenger if necessary. Please consult Microsoft for details.

 Users of Windows XP Professional must first log in as an Administrator to

install programs.

Close any programs that are running.

Download the DV Network Software installer from Canon’s web site and double-click the downloaded installer.

Select your language and click [OK].

• If Windows Messenger 4.5, 4.6 or 4.7 is not installed on your computer, a dialog appears indicating that DV Messenger cannot be installed.

• If you wish to install only the AV/C Camera Storage Subunit-WIA Driver, close the dialog and proceed with the installation.

• If you wish to install DV Messenger, close the window and cancel the installation process by clicking [Cancel] on the Install Shield Wizard. Upgrade Windows Messenger and restart installation.

Installing the Software

When the [InstallShield Wizard] appears, click [Next].

Select the software you wish to install and click [Next].

• If your camcorder is not listed under category A or B in Camcorder Categories ( 13), remove the check mark next to [Copy Canon USB Video Drivers].

• If your camcorder is listed under category E or F in Camcorder Categories ( 13), remove the check mark next to [Copy AV/C Camera Storage Drivers].

Read the license agreements and click [Yes].

When the confirmation window appears, click [Yes].

Confirm the target folder and click [Next].

If a dialog appears asking you whether you wish to create a shortcut of DV Messenger on the desktop, click [Yes].

Installing the Software

Click [Finish].

• The computer restarts and installation is complete.

Installing the Canon USB Video Driver

Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to a computer using a USB cable.

 To use the Canon USB Video Driver for using DV Messenger, your

camcorder has to be listed under category A or B in Camcorder Categories ( 13).

 To use the Canon USB Video Driver for capturing/recording movies, your

camcorder has to be listed under category A in Camcorder Categories ( 13), and the camcorder has to be connected to a computer with Hi- Speed USB 2.0.

 Before installing the driver following the procedure below, install the DV

Network Software first to copy the driver files to the computer.

 Close any programs that are running before installing the driver.  Do not turn off the camcorder until the driver installation is complete. And do

not interrupt the installation.

 Users of Windows XP Professional must first log in as an Administrator to

install programs.

Connect the power adapter to the camcorder.

If your camcorder is listed under category A in Camcorder Categories ( 13):

Set the camcorder to PLAY (VCR) mode.

If your camcorder is listed under category B in Camcorder Categories ( 13):

Set the camcorder to NETWORK mode.

Connect the camcorder to the computer using the USB cable ( 23).

• The driver installation starts automatically.

• A window appears allowing you to select an application program to start. Click [Cancel] to close the window.

Installing the Software

Restart the computer.

Check if the driver has been installed correctly.

From the [start] menu, select [My Computer] and check if the [Canon USB Video] icon appears. If the icon does not appear, the installation has not been completed properly. Uninstall ( 71) and reinstall the driver.

Installing the AV/C Camera Storage Subunit-WIA Driver

 If you have installed the AV/C Camera Storage Subunit-WIA driver contained

on the DV NETWORK SOLUTION DISK Version 1, make sure to install the driver provided with the DV Network Software when installing DV Messenger Version 2 (you do not need to uninstall the prior driver for this procedure).

 Before installing the driver following the procedure below, install the DV

Network Software first to copy the driver files to the computer.

 Close all programs that are running before installing the driver.  Do not turn off the camcorder until the driver installation is complete. And do

not interrupt the installation.

 Users of Windows XP Professional must first log in as an Administrator to

install programs.

Connect the power adapter to the camcorder.

Set the camcorder to NETWORK or CARD PLAY mode. (Camcorder without NETWORK mode: Set the camcorder to CARD PLAY mode.)

Connect the camcorder to the computer using the DV cable ( 23).

• The driver installation starts automatically.

• Depending on the setting of your computer, a video editing program may start. In such case, close this program.

• If the installation is complete, the Scanner and Camera Wizard or a dialog for selecting an application appears. Click [Cancel] to close the dialog.

Restart the computer.

Installing the Software

Check if the driver has been installed correctly.

From the [start] menu, select [My Computer] and check if the [Canon Camera Storage Device] icon appears. If the icon does not appear, the installation has not been completed properly. Uninstall ( 73) and reinstall the driver.

 Changing the Automatic Start Setting

When you install the driver, a window appears allowing you to select an application program to start each time you connect the camcorder to the computer. When using DV Messenger, we recommend setting the computer not to start any application.

Connect the power adapter to the camcorder.

Set the camcorder to NETWORK or CARD PLAY mode.

Connect the camcorder to the computer using the DV cable (23).

From the [start] menu, select [My Computer].

Right-click the mouse button on the [Canon Camera Storage Device] icon and select [Properties].

Click the [Events] tab.

Installing the Software

Select [Device Connected] for [Select an event] and [Take no action] for [Actions] and click [OK].

No application will start automatically when you connect the camcorder to the computer the next time.

 To start a WIA-compliant application automatically, select [Start this program]

and click [OK].

 If the started application displays a message such as [TWAIN data source

not found. Reinstall the scanner software.], select [WIA-Canon Camera Storage] and use the WIA-TWAIN Driver.

Installing the Software

Connecting the Camcorder to a Computer

If your camcorder is listed under category A or B in Camcorder Categories ( 13), you can use a DV cable or a USB cable to connect your camcorder to the computer. With other camcorders, use a DV cable.

Connecting the Camcorder Using a USB Cable

 Make sure to install the DV Network Software before connecting the

camcorder to the computer.

 Make sure the camcorder is being powered by the compact power adapter

before connecting it to a computer.

 Do not connect any devices to the camcorder’s DV terminal when

connecting the camcorder to the computer using the USB terminal.

Attach the supplied USB cable to the computer’s USB port and the camcorder’s USB Terminal.

• Refer to your computer manual for the location of the computer’s USB ports.

• See your camcorder instruction manual for connecting instructions.

Connecting the Camcorder Using a DV Cable

 Make sure to install the DV Network Software before connecting the

camcorder to the computer.

 Make sure the camcorder is being powered by the compact power adapter

before connecting it to a computer.

 Do not connect any devices to the camcorder’s USB terminal when

connecting the camcorder to the computer using the DV terminal.

Attach the DV cable to the computer’s IEEE1394 terminal and the camcorder’s DV terminal.

• Refer to your computer manual for the location of the computer’s IEEE1394 terminal.

• See your camcorder’s instruction manual for connecting instructions.

Connecting the Camcorder to a Computer

DV Messenger

Preparations for DV Messenger

Before you use DV Messenger, check whether the camcorder is correctly connected to the computer.

Users of Windows XP Professional must first log in as an Administrator to use DV Messenger.

Checking the Camcorder Connection

Connect the power adapter to the camcorder.

Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA mode.)

Connect the camcorder to the computer ( 23).

From the [start] menu, select [All Programs] and [Windows Messenger].

• [Windows Messenger] appears.

• If the [.NET Passport Wizard] appears, click [Cancel].

From the [Tools] menu, select [Audio Tuning Wizard].

Preparations for DV Messenger

Click [Next].

Confirm that your camcorder is displayed and click [Cancel].

• If you are connecting a Canon camcorder using a USB cable, check if [Canon USB Video] is displayed. If you are connecting a Canon camcorder using a DV cable, check if [Canon DV Device] is displayed.

• If [Canon DV Device] or [Canon USB Video] does not appear, click to display the device list and check if it is listed.

• If [Canon DV Device] or [Canon USB Video] is not listed, install Windows XP Service Pack 1. Please consult Microsoft for details.

DV Messenger

Preparations for DV Messenger

Setting the UPnP Router

If you are using an UPnP-compliant router to connect to the Internet, you need to install UPnP and disable the firewall of Windows XP to use DV Messenger.

 Installing UPnP

From the [start] menu, select [Control Panel].

Click [Network and Internet Connections].

Preparations for DV Messenger

Click [Network Connections].

From the [Advanced] menu, select [Optional Networking Components] from the displayed menu.

Select [Networking Services] and click [Details].

DV Messenger

Preparations for DV Messenger

Place a check mark next to [Universal Plug and Play] and click [OK].

• If you have installed Windows XP Service Pack 1, place a check mark next to [Internet Gateway Device Discovery and Control Client] and [Universal Plug and Play].

• If you have installed Windows XP Service Pack 2, place a check mark next to [Internet Gateway Device Discovery and Control Client] and [UPnP User Interface].

Click [Next].

Installation starts.

When installation is complete, restart your computer.

After restart, repeat steps 1 to 3 and check if an icon appears under [Internet Gateway Device]. If not, your router is not correctly recognized by the computer and DV Messenger cannot be used. In such case, you need to deactivate its firewall function. For details, consult your software or computer manufacturer.

Preparations for DV Messenger

+ 65 hidden pages