Canon Trimmer User Manual

Two-Knife Booklet Trimmer-A1

User's Guide

ENGLISH

Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.

Structure of the Users Guide

Read here first.

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Before You Begin

Operating Procedures

Troubleshooting

Appendix

Important Information

• This manual is designed to help you to install, operate and maintain the trimmer. Please read and under­stand this manual, and keep it in a safe and convenient place.

• Do not operate the trimmer until you read and understand the instructions in this manual.

• Canon shall not be liable for incidental, consequential damages resulting from: improper or inadequate
maintenance by the customer, unauthorized modification or misuse, or operation outside of the environmen­tal specifications for the product.

• Canon pursues a policy of continuing improvement in design and performance of the product. Therefore, the
product design and specifications are subject to change without prior notice and without legal obligation.

• All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another lan­guage without the prior written consent of your local authorized dealer.

• This product applies to the CE Marking.

• This manual describes the operating procedures for the Two-Knife Booklet Trimmer-A1. For trimmer opera­tions set from the host machine (printer), see the operating manual for the host machine (printer.)

i

Safe Use of Machine

To use this machine safely, proper operation and periodic maintenance are indispensable. Read the safety
precautions described in this manual thoroughly, and do not perform operations or maintenance procedures
until you understand them completely.

The operating procedures and safety precautions described in this manual are valid only for proper use of this

achine. Responsibility for any improper use or operation of this machine lies with the user.

m

Safety precautions are indicated in this manual as follows:

Indicates a warning concerning operations that may lead to death or injury to per-

WARNING

CAUTION

sons if not performed correctly. In order to use the machine safely, always pay

ttention to these warnings.

a

Indicates a caution concerning operations that may lead to injury to persons, or
damage to property if not performed correctly. In order to use the machine safely,
always pay attention to these cautions.

This symbol indicates the range of acceptable values and operating conditions.

This symbol indicates useful supplementary information for operational proce­dures.

Operating Safety Precautions

WARNING

When moving the machine, be sure to turn off the main power switch on the host machine, then
disconnect the power cord and contact your local authorized dealer. Otherwise, the cord may be
damaged and may result in a fire or electric shock.

Do not remove the safety covers or deactivate the sensor switches for the safety covers. Other­wise, the machine may start suddenly without warning, leading to severe injury.

CAUTION

When removing jammed booklets from the Infeed section, do not put your hands and fingers close to the
belt. Otherwise, if the belt moves suddenly without warning, your hands and fingers may be caught.

This machine weighs 145 kg (319 lb). When you operate the machine, consider the machine
weight and use the machine safely.

To disconnect the power to this machine, unplug the power plug on the back of the machine.

Do not use paper which does not meet the specifications. Otherwise, it may cause paper jams.

Do not open the covers while machine is operating, or the machine will stop and booklets will jam.

Use this machine only in an office or commercial environment. Do not use this machine in an
industrial environment.

ii

FCC NOTICES

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter­ference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a resi­dential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at this own expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

iii

CONTENTS

Important Information ...............................................................................................................i

Safe Use of Machine ...............................................................................................................ii

Operating Safety Precautions ..................................................................................................ii

FCC NOTICES ....................................................................................................................... iii

Section 1 Before You Begin

Machine Descriptions .......................................................................................................... 1-2

Section Descriptions ............................................................................................................ 1-3

[1] Two-Knife Trim Section ............................................................................................. 1-3

[2] Conveyor Section ...................................................................................................... 1-4

[3] Trim Ejecting Section ................................................................................................. 1-5

Section 2 Operating Procedures

Trimmer Setup ..................................................................................................................... 2-2

Operation While Trimming ................................................................................................... 2-3

Section 3 Troubleshooting

Error Messages ................................................................................................................... 3-2

Service Call Error ........................................................................................................... 3-2

Error Message Chart ...................................................................................................... 3-3

Clearing Paper Jams ........................................................................................................... 3-4

Section 4 Appendix

Specifications ...................................................................................................................... 4-2

Specifications .................................................................................................................4-2

Index .................................................................................................................................... 4-3

iv

Before You Begin

1

CHAPTER

Machine Descriptions........................................................................................................................... 1-2

Section Descriptions ............................................................................................................................ 1-3

[1] Two-Knife Trim Section.............................................................................................................. 1-3

[2] Conveyor Section....................................................................................................................... 1-4

[3] Trim Ejecting Section ................................................................................................................. 1-5

1-1