Canon PowerShot ELPH 110 HS User Guide

Camera User Guide
• Before use, be sure to read this guide, including the safety precautions.
• This guide will familiarize you with how to use the camera correctly.
• Keep the guide handy for future reference.
ENGLISH
Package Contents
Before use, make sure the following items are included in the package. If anything is missing, contact your camera dealer.
Camera Battery Pack NB-11L
Interface Cable IFC-400PCU
Getting Started DIGITAL CAMERA Solution
A memory card is not included (p. 2).
PDF Manuals
For information about the included software, refer to the ImageBrowser EX User Guide, in PDF format (p. 25).
Adobe Reader is required to view the PDF manuals.
(with terminal cover)
Battery Charger CB-2LD/
CB-2LDE
Wrist Strap WS-800
Disk
Warranty
Card
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of capacity.
SD memory cards*
SDHC memory cards*
SDXC memory cards*
Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been verified to work
with the camera.
2
Preliminary Notes and Legal Information
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your operating system).
Preliminary Notes and Legal Information
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Images recorded by the camera are intended for personal use. Refrain from unauthorized recording that infringes on copyright law, and note that even for personal use, photography may contravene copyright or other legal rights at some performances or exhibitions, or in some commercial settings.
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
3
Part Names and Conventions in This
Guide
Lens Speaker Zoom lever Shooting: i (telephoto) / j (wide angle) Playback: k (magnify) / g (index)
Shutter button Power button Mode switch Microphone Flash Lamp
: Important information you should know
: Notes and tips for expert camera use
(p. xx): Pages with related information (in this example, “xx” represents a
page number)
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
“the memory card”.
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
Movies
4
: Indicates that the function is used when shooting or
viewing still images.
: Indicates that the function is used when shooting or
viewing movies.
Part Names and Conventions in This Guide
Tripod socket Screen (LCD monitor) Memory card/battery cover Indicator 1 (Playback) button DC coupler cable port n button Strap mount
TM
terminal
HDMI
In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
The following camera buttons are represented by icons.
o Up button on back q Left button on back m FUNC./SET button on back r Right button on back p Down button on back
On-screen text is indicated in brackets.
AV OUT (Audio/video output) / DIGITAL terminal Movie button
b (Exposure compensation) / Up button e (Macro) / Left button
FUNC./SET button
h (Flash) / Right button l (Display) / Down button
5
Contents
Package Contents .............................2
Compatible Memory Cards ................2
Preliminary Notes and Legal
Information.......................................3
Part Names and Conventions in
This Guide .......................................4
Contents ............................................6
Contents: Basic Operations ...............8
Safety Precautions...........................10
Initial Preparations ...........................13
Trying the Camera Out ....................20
Included Software, PDF Manuals ....25
Accessories .....................................32
1
Camera Basics .................33
On/Off ..............................................34
Shutter Button ..................................35
Shooting Modes...............................35
Shooting Display Options ................36
FUNC. Menu....................................37
n Menu ....................................38
Indicator Display ..............................39
Clock................................................39
2
Smart Auto Mode .............41
Shooting in Smart Auto Mode..........42
Common, Convenient Features.......51
Using Face ID ..................................57
Image Customization Features........67
Helpful Shooting Features ...............72
Customizing Camera Operation ......75
3
Other Shooting Modes.....77
Specific Scenes ...............................78
Applying Special Effects ..................82
Special Modes for Other
Purposes ....................................... 91
Shooting Various Movies ................ 99
4
G mode ...........................101
Shooting in Program AE Mode
(G Mode) .................................... 102
Image Brightness
(Exposure Compensation) .......... 103
Color and Continuous Shooting .... 106
Shooting Range and Focusing...... 110
Flash ............................................. 117
Other Settings ............................... 119
5
Playback Mode ...............121
Viewing.......................................... 122
Browsing and Filtering Images...... 126
Editing Face ID Information........... 129
Image Viewing Options ................. 131
Protecting Images ......................... 135
Erasing Images ............................. 139
Rotating Images............................142
Image Categories .......................... 144
Editing Still Images........................ 148
Editing Movies ............................... 153
6
Setting Menu...................155
Adjusting Basic Camera
Functions .................................... 156
7
Accessories ....................167
Tips on Using Included
Accessories................................. 168
Optional Accessories .................... 169
Using Optional Accessories .......... 171
6
Contents
Printing Images ............................. 177
Using an Eye-Fi Card.................... 190
8
Appendix......................... 193
Troubleshooting ............................ 194
Handling Precautions .................... 197
On-Screen Messages.................... 198
On-Screen Information .................. 200
Functions and Menu Tables ..........204
Index.............................................. 212
7
Contents: Basic Operations
4 Shoot
z Use camera-determined settings (Auto Mode) ............................. 42
Shooting people well
IP
Portraits
(p. 78)
Matching specific scenes
Night Scenes
(p. 78)
Applying special effects
Vivid Colors
(p. 82)
Against Snow
(p. 79)
Low Light
(p. 79)
Poster Effect
(p. 82)
Smooth Skin
(p. 81)
S
Under Water
(p. 79)
Fish-Eye Effect
(p. 83)
Miniature Effect
(p. 84)
Toy Camera Effect
(p. 85)
Soft Focus
(p. 86)
z Focus on faces ............................................................... 42, 78, 112
z Without using the flash (Flash Off) ............................................... 54
z With myself in the shot (Self-Timer)........................................ 52, 94
z Add the shooting date and time (Date Stamp).............................. 55
z Use Face ID.......................................................................... 57, 129
z Movie clips and photos together (Movie Digest) ........................... 91
Monochrome
(p. 87)
8
Contents: Basic Operations
1 View
z View images (Playback Mode) ................................................... 122
z Automatic playback (Slideshow)................................................. 132
z On a TV ...................................................................................... 171
z On a computer .............................................................................. 26
z Browse through images quickly .................................................. 126
z Erase images.............................................................................. 139
E Shoot/View Movies
z Shoot movies .......................................................................... 42, 99
z View movies ............................................................................... 122
z Fast-moving subjects, slow-motion playback ............................... 99
c Print
z Print pictures............................................................................... 177
Save
z Save images to a computer .......................................................... 26
9
Safety Precautions
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Warning
Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire. If liquids or foreign objects come into contact with the camera interior, immediately turn the camera off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or a Canon Customer Support Help Desk.
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause injury and damage the surroundings. In the event that a battery leaks and the battery electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
Denotes the possibility of serious injury or death.
10
Safety Precautions
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities.
Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on an audio CD player (music player). Additionally, this could damage the speakers.
Caution
When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may cause deformation of the camera or battery charger casing.
Viewing images on the camera screen for prolonged periods may cause
discomfort.
Caution
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
Denotes the possibility of injury.
Denotes the possibility of damage to the equipment.
11
Safety Precautions
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage.
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z Thread the end of the strap through the strap
Holding the Camera
z Place the strap around your wrist. z When shooting, keep your arms close to your
hole ( ), and then pull the other end of the strap through the loop on the threaded end ().
body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash.
13
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the S marks on the battery and
charger, insert the battery by pushing it in ( ) and down ( ).
Charge the battery.
z For CB-2LD: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z For CB-2LDE: Plug the power cord into the
CB-2LD
CB-2LDE
charger, then plug the other end into a power outlet.
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
Remove the battery.
z After unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
14
Initial Preparations
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or damage to the product.
For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started guide.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (p. 160).
Check the card’s write-protect tab.
z Recording is not possible on memory cards
with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position.
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the battery.
z While pressing the battery lock in the
direction of the arrow, insert the battery facing as shown and push it in until it clicks into the locked position.
z Batteries inserted facing the wrong way
cannot be locked into the correct position. Always confirm that the battery is facing the right way and locks when inserted.
Battery LockTerminals
15
Initial Preparations
Insert the memory card.
z Insert the memory card facing as shown until
it clicks into the locked position.
z Make sure the memory card is facing the right
way when you insert it. Inserting memory cards facing the wrong way may damage the
Terminals
Removing the Battery and Memory Card
camera.
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it, until it clicks into the closed position ().
Remove the battery.
z Open the cover and press the battery lock in
the direction of the arrow.
X The battery will pop up.
Remove the memory card.
z Push the memory card in until it clicks, and
then slowly release it.
X The memory card will pop up.
16
Initial Preparations
Setting the Date and Time
A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times added to your images.
Turn the camera on.
z Press the power button.
X The [Date/Time] screen is displayed.
Set the date and time.
z Press the qr buttons to choose an option. z Press the op buttons to specify the date
and time.
z When finished, press the m button.
Set the local time zone.
z Press the qr buttons to choose your local
time zone.
Finish the setup process.
z Press the m button when finished. After a
confirmation message, the setting screen is no longer displayed.
z To turn off the camera, press the power
button.
17
Initial Preparations
Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify the correct information.
To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons.
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
z Press the n button.
Choose [Date/Time].
z Move the zoom lever to choose the 3 tab. z Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
z Follow step 2 on p. 17 to adjust the settings. z Press the n button to close the menu.
Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 169), even if the camera is left off.
Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.
18
Initial Preparations
Display Language
The display language can be changed as needed.
Enter Playback mode.
z Press the 1 button.
Access the setting screen.
z Press and hold the m button, and then
immediately press the n button.
Set the display language.
z Press the opqr buttons to choose a
language, and then press the m button.
X Once the display language has been set, the
setting screen is no longer displayed.
A clock icon is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the m button to dismiss the clock icon and repeat step 2.
You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
19
Still Images Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode switch to A. z Aim the camera at the subject. As the camera
determines the scene, it will make a slight clicking noise.
X Icons representing the scene and image
stabilization mode are displayed in the upper right of the screen.
X Frames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to zoom away from the subject, move it toward j (wide angle).
20
AF Frames
Trying the Camera Out
Shoot. Shooting Still Images
Focus.
z Press the shutter button lightly, halfway
down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
Shoot.
z Press the shutter button all the way down.
X As the camera shoots, a shutter sound is
played, and in low-light conditions, the flash fires automatically.
X Keep the camera still until the shutter sound
ends.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter button again.
Shooting Movies
Start shooting.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is displayed with the elapsed time.
21
Trying the Camera Out
Elapsed Time
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not recorded.
X Frames displayed around any faces that are
detected indicate that they are in focus.
z Once recording begins, you can take your
finger off the movie button.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as recording stops.
X Recording will stop automatically when the
memory card becomes full.
Viewing
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
z Press the 1 button.
X Your last shot is displayed.
Browse through your images.
z To view the previous image, press the q
button. To view the next image, press the r button.
22
Trying the Camera Out
z To access Scroll Display mode, press and
hold the qr buttons for at least one second. In this mode, press the qr buttons to browse through images.
z To return to single-image display, press the
m button.
z To browse images grouped by shooting date,
press the op buttons in Scroll Display mode.
z Movies are identified by a icon. To play
movies, go to step 3.
Play movies.
z Press the m button, press the op buttons
to choose , and then press the m button again.
z Playback now begins, and after the movie is
finished, is displayed.
z To adjust the volume, press the op buttons
during playback.
To switch to Shooting mode from Playback mode, press the shutter button
halfway.
23
Trying the Camera Out
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered.
Choose an image to erase.
z Press the qr buttons to choose an image.
Erase the image.
z Press the m button, press the op buttons
to choose a, and then press the m button again.
z After [Erase?] is displayed, press the qr
buttons to choose [Erase], and then press the m button.
X The current image is now erased.
z To cancel erasure, press the qr buttons to
choose [Cancel], and then press the m button.
You can also erase all images at once (p. 139).
24
Included Software, PDF Manuals
The software and PDF manuals on the included CD-ROM are introduced below, with instructions for installation, saving images to a computer, and using the PDF manuals.
Features of the Included Software
After installing the software on the CD-ROM, you can do the following things on your computer.
ImageBrowser EX
z Import images and change camera settings z Manage images: view, search, and organize z Print and edit images z Update to the latest software version with the auto update function
Auto Update Function
Using the included software, you can update to the latest version, and download new functions via the Internet (some software excluded). Be sure to install the software on a computer with an Internet connection so you can use this function.
Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
This function may not be available depending on the camera or
region you live in.
PDF Manuals
Installing the software on the CD-ROM will also install the following PDF manuals on your computer.
Camera User Guide
Once you are familiar with the information in Getting Started, refer to this for a more in­depth understanding of camera operation.
ImageBrowser EX User Guide
Refer to this guide when using the included software. This guide can be referenced from the ImageBrowser EX Help function.
Depending on the country or region where you purchased your camera, the
ImageBrowser EX User Guide may not be accessible from the Help function. In such cases, it will either be included on the CD-ROM bundled with your camera, or you can download the latest version from the Canon website.
25
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe Reader is required to view the PDF manuals.
Windows
Operating System
Computer
Processor
RAM
Interfaces USB
Free Hard Disk Space
Display 1024 x 768 resolution or higher
* In Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed.
Installation may take some time, depending on computer performance.
Macintosh
Operating System Mac OS X 10.6
Computer
Processor
RAM 1 GB or more (still images), 2 GB or more (movies)
Interfaces USB
Free Hard Disk Space
Display 1024 x 768 resolution or higher
Windows 7 SP1 Windows Vista SP2 Windows XP SP3
Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection
Still images: 1.6 GHz or higher, Movies: Core 2 Duo 2.6 GHz or higher
Windows 7 (64 bit): 2 GB or more Windows 7 (32 bit), Windows Vista (64 bit, 32 bit): 1 GB or more (still images), 2 GB or more (movies) Windows XP: 512 MB or more (still images), 2 GB or more (movies)
440 MB or more*
Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection
Still images: Core Duo 1.83 GHz or higher, Movies: Core 2 Duo 2.6 GHz or higher
550 MB or more
Check the Canon website for the latest system requirements, including
supported OS versions.
26
Included Software, PDF Manuals
Installing the Software and PDF Manuals
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. Using the software auto update function, you can update to the latest version and download new functions via the Internet (some software excluded), so be sure to install the software on a computer with an Internet connection.
Insert the CD-ROM in the computer’s CD-ROM drive.
z Insert the included CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) in the computer’s CD-ROM drive.
z On a Macintosh computer, after inserting the
disc, double-click the desktop disc icon to open it, and then double-click the icon displayed.
Begin the installation.
z Click [Easy Installation] and follow the on-
screen instructions to complete the installation process.
When a message is displayed prompting you to connect the camera, connect it to a computer.
z With the camera turned off, open the cover
( ). With the smaller plug of the included interface cable (p. 2) in the orientation shown, insert the plug fully into the camera terminal ( ).
27
Included Software, PDF Manuals
z Insert the larger plug of the interface cable in
the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual.
Install the files.
z Turn the camera on, and follow the on-screen
instructions to complete the installation process.
X The software will connect to the Internet to
update to the latest version and download new functions. Installation may take some time, depending on computer performance and the Internet connection.
z Click [Finish] or [Restart] on the screen after
installation and remove the CD-ROM when the desktop is displayed.
z Turn the camera off and disconnect the
cable.
When not connected to the Internet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
- The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM and follow the on-screen installation instructions for each. Doing so will ensure that each camera will receive the correct updates and new functions via the auto update function.
28
Included Software, PDF Manuals
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Connect the camera to the computer.
z Follow step 3 on p. 27 to connect the camera
to a computer.
Turn the camera on to access CameraWindow.
z Press the 1 button to turn the camera on. z On a Macintosh computer, Came raWindow is
displayed when a connection is established between the camera and computer.
z For Windows, follow the steps introduced
below.
z In the screen that displays, click the link
to modify the program.
z Choose [Downloads Images From Canon
Camera using Canon CameraWindow] and then click [OK].
z Double click .
29
Included Software, PDF Manuals
CameraWindow
Save the images to the computer.
z Click [Import Images from Camera], and then
click [Import Untransferred Images].
X Images are now saved to the Pictures folder
on the computer, in separate folders named by date.
z After images are saved, close
CameraWindow, press the 1 button to turn the camera off, and unplug the cable.
z For instructions on viewing images on a
computer, refer to the ImageBrowser EX User Guide.
In Windows 7, if the screen in step 2 is not displayed, click the icon in the
taskbar.
To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed when you turn the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and choose [All Programs] X [Canon Utilities] X [CameraWindow] X [CameraWindow].
On a Macintosh computer, if CameraWindow is not displayed after step 2, click
the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
Although you can save images to a computer simply by connecting your camera
to the computer without using the included software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image file sizes.
- Some functions provided by the included software may not be available, such
as editing movies or returning images to the camera.
30
Included Software, PDF Manuals
Using the PDF Manuals
Use the included CD-ROM to install the PDF manuals, and a shortcut for the camera manual will be created on the desktop. Adobe Reader is required to view the PDF manuals.
It may not be possible to install the software and PDF manuals on computers
that do not meet the system requirements (p. 26). To view the man uals on these computers, copy the PDF files in the Readme folder on the CD-ROM directly to a computer capable of using Adobe Reader.
31
Accessories
Included Accessories
Wrist Strap
WS-800
Power
AC Adapter Kit
ACK-DC90
Battery Pack
NB-11L*
(with terminal cover)
Interface Cable IFC-400PCU*
Memory Card Card Reader
HDMI Cable HTC-100
AV Cable AVC-DC400
Flash Unit
High-Power Flash HF-DC2
* Also available for purchase separately.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.
Waterproof Case
WP-DC330L
Cable
Case
Battery Charger
CB-2LD/
CB-2LDE*
DIGITAL CAMERA
Solution Disk
Windows/ Macintosh Computer
TV/Video
System
Canon PictBridge-
Compatible Printers
32
1
Camera Basics
Basic camera operations and features
33
On/Off
Shooting Mode
z Press the power button to turn the camera on
and prepare for shooting.
z To turn the camera off, press the power
button again.
Playback Mode
z Press the 1 button to turn the camera on
and view your shots.
z To turn the camera off, press the 1 button
again.
To switch to Playback mode from Shooting mode, press the 1 button.
To switch to Shooting mode from Playback mode, press the shutter button
halfway (p. 35).
The lens will be retracted after about one minute once the camera is in Playback
mode. You can turn the camera off when the lens is retracted by pressing the 1 button.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates the screen and then turns itself off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the lens is retracted and the camera turns itself off. To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway (p. 35).
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
You can deactivate these power-saving features if you prefer (p. 163).
You can also adjust the timing of screen deactivation (p. 163).
34
Shutter Button
To ensure your shots are in focus, always press the shutter button lightly (halfway) initially. Once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down.
Press halfway. (Press lightly to
focus.)
z Press the shutter button halfway. The camera
beeps twice, and AF frames are displayed around image areas in focus.
Press all the way down. (From the
halfway position, press fully to shoot.)
The camera shoots, as a shutter sound is
X
played.
z Keep the camera still until the shutter sound
ends.
Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes, and images will be blurry if you move the camera (or the subject moves) before the shutter sound ends.
Shooting Modes
Use the mode switch to access each shooting mode.
Fully automatic shooting, with camera-determined settings (p. 42).
Shoot with optimal settings for specific scenes (p. 78), or take a variety of shots using your preferred settings (p. 101).
35
Shooting Display Options
Press the p button to view other information on the screen, or to hide the information. For details on the information displayed, see p. 200.
Information is displayed No information is displayed
Screen brightness is automatically increased by the night display function when
you are shooting under low light, making it easier to check how shots are composed. However, on-screen image brightness may not match the brightness of your shots. Note that any on-screen image distortion or jerky subject motion will not affect recorded images.
For playback display options, see p. 124.
36
FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (pp. 206 – 207) or playback mode (p. 211).
Access the FUNC. menu.
z Press the m button.
Choose a menu item.
z Press the op buttons to choose a menu
item, and then press the m or r button.
z In some menu items, functions can be
specified simply by pressing the m or r button, or another screen is displayed for
Options
Menu Items
To undo any accidental setting changes, you can restore the camera’s default
settings (p. 166).
configuring the function.
Choose an option.
z Press the op buttons to choose an option. z Options labeled with a icon can be
configured by pressing the n button.
z To return to the menu items, press the q
button.
Finish the setup process.
z Press the m button.
X The screen before you pressed the m button
in step 1 is displayed again, showing the option you configured.
37
n Menu
Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting (4), playback (1), and so on. Note that available settings vary depending on the selected shooting or playback mode (pp. 208 – 211).
Access the menu.
z Press the n button.
Choose a tab.
z Move the zoom lever or press the qr buttons
to choose a tab.
Choose a setting.
z Press the op buttons to choose a setting. z To choose settings with options not shown,
first press the m or r button to switch screens, and then press the op buttons to select the setting.
Choose an option.
z Press the qr buttons to choose an option.
Finish the setup process.
z
Press the displayed before you pressed the button in step 1.
n
button to return to the screen
n
To undo any accidental setting changes, you can restore the camera’s default
settings (p. 166).
38
Indicator Display
The indicator on the back of the camera (p. 5) lights up or blinks depending on the camera status.
Color
Green
Indicator
Status
On Connected to a computer (p. 29), or display off
Blinking
When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may corrupt images or damage the camera or memory card.
Starting up, recording/reading/transmitting images, or shooting long exposures (p. 95)
Camera Status
Clock
You can check the current time.
z Press and hold the m button.
X The current time appears.
z If you hold the camera vertically while using
the clock function, it will switch to vertical display. Press the qr buttons to change the display color.
z
Press the m button again to cancel the clock display.
When the camera is off, press and hold the m button, then press the power
button to display the clock.
39
40
2
Smart Auto Mode
Convenient mode for easy shots with greater control
over shooting
41
Still Images Movies
Shooting in Smart Auto Mode
For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Turn the camera on.
z Press the power button.
X The startup screen is displayed.
Enter A mode.
z Set the mode switch to A. z Aim the camera at the subject. The camera
will make a slight clicking noise as it determines the scene.
X Icons representing the scene and image
stabilization mode are displayed in the upper right of the screen (pp. 47, 49).
X Frames displayed around any detected
subjects indicate that they are in focus.
Compose the shot.
z To zoom in and enlarge the subject, move the
zoom lever toward i (telephoto), and to zoom away from the subject, move it toward
Zoom Bar
j (wide angle). (A zoom bar showing the zoom position is displayed.)
42
AF Frames
Shooting in Smart Auto Mode
Shoot. Shooting Still Images
Focus.
z Press the shutter button halfway. The camera
beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
z Several AF frames are displayed when
multiple areas are in focus.
Shoot.
z Press the shutter button all the way down.
X As the camera shoots, a shutter sound is
played, and in low-light conditions, the flash fires automatically.
z Keep the camera still until the shutter sound
ends.
X Your shot remains displayed on the screen
for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter button again.
43
Shooting in Smart Auto Mode
Elapsed Time
Shooting Movies
Start shooting.
z Press the movie button. The camera beeps
once as recording begins, and [ Rec] is displayed with the elapsed time.
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not recorded.
X Frames displayed around any faces that are
detected indicate that they are in focus.
z Once recording begins, you can take your
finger off the movie button.
Resize the subject and
recompose the shot as needed.
z To resize the subject, do the same thing as in
step 3 on p. 42. However, note that the sound of camera operations will be recorded.
z When you recompose shots, the focus,
brightness, and colors will be automatically adjusted.
Finish shooting.
z Press the movie button again to stop
shooting. The camera beeps twice as recording stops.
z Recording will stop automatically when the
memory card becomes full.
44
Shooting in Smart Auto Mode
Still Images/Movies
To restore camera sound if you have accidentally deactivated it (by
holding the p button down while turning the camera on), press the n button and choose [Mute] on the 3 tab, and then press the qr buttons to choose [Off].
Still Images
A flashing icon warns that images are more likely to be blurred
by camera shake. In this case, attach the camera to a tripod or take other measures to keep it still.
If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Specifications” in the Getting Started guide.
The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing range (shooting range), see “Specifications” in the Getting Started guide.
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
A blinking h icon displayed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging. Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again.
The shutter sound will not be played when the Sleeping and Babies (Sleeping)
icons (p. 47) are displayed.
The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background (Multi­area White Balance).
45
Shooting in Smart Auto Mode
Movies
The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
Microphone
Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be recorded.
To correct suboptimal image color that may occur in movie
shooting (p. 71) after you recompose shots, press the movie button to stop recording, and then press it again to resume recording.
Audio recording is monaural.
Keep your fingers away from the
microphone while shooting movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled.
46
Shooting in Smart Auto Mode
Scene Icons
In A mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color. Depending on the scene, continuous images may be shot (p. 48).
Subject
People
Background
Normal Backlit Dark* Sunsets
Spotlights
In Motion
Shadows on Face
Smiling
Sleeping
Babies
Smiling
Sleeping
Children (In Motion)
Other Subjects
In Motion
At Close Range
* When using tripod
The background color of icons is light blue when the background is a blue sky, dark blue when the background is dark, and gray for all other backgrounds. The background color of icons is light blue when the background is a blue sky, and gray for all other backgrounds.
––––
–––
–––
–––
–––
–––
–––
–––
–––
––
47
Shooting in Smart Auto Mode
The background color of , , , , and is dark blue, and the background
color of is orange.
When shooting movies, only People, Other Subjects, and At Close Range icons will be
displayed.
When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be displayed.
When the drive mode is set to (p. 109), and when [Hg Lamp Corr.] is set to [On] and
scenes are automatically corrected (p. 70), Smiling, Sleeping, Babies (Smiling), Babies (Sleeping), and Children icons will not be displayed.
If the flash is set to , the Backlit icons for Smiling and Children will not be displayed.
Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed when
[Face ID] is set to [On], and the face of a registered baby (under two years old) or child (from two to twelve years old) is detected (p. 57). Confirm beforehand that the date and time are correct (p. 17).
Try shooting in G mode (p. 101) if the scene icon does not match
actual shooting conditions, or if it is not possible to shoot with your expected effect, color, or brightness.
Continuous Shooting Scenes
If you shoot a still image when the following icons are displayed, the camera will shoot continuously. If you press the shutter button halfway when one of the icons in the table below is displayed, one of the following icons will be displayed to inform you that the camera will shoot continuous images: ,
, or W.
Smiling (including Babies)
Sleeping (including Babies)
Children
: Consecutive images are captured, and the camera analyzes details such as facial expressions to save the image determined to be the best.
: Beautiful shots of sleeping faces, created by combining consecutive shots to reduce camera shake and image noise. The AF assist beam will not light up, the flash will not fire, and the shutter sound will not be played.
W: So you don’t miss a photo opportunity of children who move around, the camera will capture three consecutive images for each shot.
48
Shooting in Smart Auto Mode
In some scenes, expected images may not be saved, and images
may not look as expected.
Focus, image brightness, and color are determined by the first shot.
When you want to shoot single images only, press the m button, choose
in the menu, and then choose .
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in A mode.
Image stabilization for movies, Image stabilization for still images
Image stabilization for still images, when panning*
Image stabilization for macro shots (Hybrid IS)
* Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera shake, and horizontal stabilization stops. Similarly, when you follow subjects moving vertically, image stabilization only counteracts horizontal camera shake.
To cancel image stabilization, set [IS Mode] to [Off] (p. 119). In this case, an IS
icon is not displayed.
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for subtle
camera shake, such as when
shooting movies at telephoto
(Powered IS)
No image stabilization, because
the camera is mounted on a
tripod or held still by other means
49
Shooting in Smart Auto Mode
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are aiming the camera at.
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame will remain on the screen.
When you are pressing the shutter button halfway and the camera detects
subject movement, a blue frame is displayed, and the focus and image brightness are constantly adjusted (Servo AF).
Try shooting in G mode (p. 101) if no frames are displayed, if frames
are not displayed around desired subjects, or if frames are displayed on the background or similar areas.
50
Common, Convenient Features
Still Images Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 20x enlargement.
Move the zoom lever toward i.
z Hold the lever until zooming stops.
X Zooming stops at the largest possible zoom
factor (where the image is not noticeably grainy), which is displayed when you release the zoom lever.
Zoom Factor
Move the zoom lever toward i again.
X The camera zooms in even closer on the
subject.
Moving the zoom lever will display the zoom bar (which indicates the
zoom position). The color of the zoom bar will change depending on the zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
-
Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution settings (p. 68), the maximum zoom factor can be achieved by following step 1.
Focal length when optical and digital zoom are combined is as follows (35mm
film equivalentt). 24 – 480 mm (24 – 120 mm with optical zoom alone)
To deactivate digital zoom, press the n button, choose [Digital Zoom] on
the 4 tab, and then choose [Off].
51
Common, Convenient Features
Still Images Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button.
Configure the setting.
z Press the m button, choose in the menu,
and then choose the ] option (p. 37).
X Once the setting is complete, ] is displayed.
Shoot.
z For Still Images: Press the shutter button
halfway to focus on the subject, and then press it all the way down.
z For Movies: Press the movie button.
X Once you start the self-timer, the lamp will
blink and the camera will play a self-timer sound.
X Two seconds before the shot, the blinking
and sound will speed up. (The lamp will remain lit in case the flash fires.)
z To cancel shooting after you have triggered
the self-timer, press the n button.
z To restore the original setting, choose in
step 1.
52
Common, Convenient Features
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.
Configure the setting.
z Follow step 1 on p. 52 and choose [.
X Once the setting is complete, [ is displayed.
z Follow step 2 on p. 52 to shoot.
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
Choose $.
z Follow step 1 on p. 52, choose $, and then
press the n button.
Configure the setting.
z Press the op buttons to choose [Delay] or
[Shots].
z Press the qr buttons to choose a value, and
then press the m button.
X Once the setting is complete, $ is displayed.
z Follow step 2 on p. 52 to shoot.
For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.
When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.)
53
Common, Convenient Features
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
Configure the setting.
z Press the r button, press the qr buttons to
choose !, and then press the m button.
X Once the setting is complete, ! is displayed.
z To restore the original setting, repeat this
process but choose .
If a flashing icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take other measures to keep it still.
Still Images
54
Common, Convenient Features
Still Images
Adding the Shooting Date and Time
The camera can add the shooting date and time to images in the lower-right corner. However, note that these cannot be removed. Confirm beforehand that the date and time are correct (p. 17).
Configure the setting.
z Press the n button, choose [Date
Stamp] on the 4 tab, and then choose the desired option (p. 38).
X Once the setting is complete, [DATE] is
displayed.
Shoot.
X As you take shots, the camera adds the
shooting date or time to the lower-right corner of images.
z To restore the original setting, choose [Off] in
step 1.
Images originally recorded without the date and time can be printed with this
information as follows. However, adding the date and time to images that already have this information may cause it to be printed twice.
- Use camera DPOF print settings (p. 184) to print
- Use the included software to print
For details, refer to the ImageBrowser EX User Guide.
- Print using printer functions (p. 177)
55
Common, Convenient Features
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
Specify Tracking AF.
z Press the o button.
X is displayed in the center of the screen.
Choose a subject to focus on.
z Aim the camera so that is on the desired
subject, and then press the shutter button halfway.
X A blue frame is displayed, and the camera will
keep the subject in focus and image brightness adjusted (Servo AF).
Shoot.
z Press the shutter button all the way down to
shoot.
z Press the o button to cancel Tracking AF.
Tracking may not be possible when subjects are too small or move too rapidly,
or when subject color or brightness matches that of the background too closely.
56
Still Images
Using Face ID
If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In A mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting. This function is also useful when searching for a specific registered person among a large number of images (p. 126).
Personal Information
Information such as images of a face (face info) registered with Face ID,
and personal information (name, birthday) will be saved on the camera. Additionally, when registered people are detected, their names will be recorded in still images. When using the Face ID function, be careful when sharing the camera or images with others, and when posting images online where many others can view them.
When disposing of a camera or transferring it to another person after using
Face ID, be sure to erase all information (registered faces, names, and birthdays) from the camera (p. 65).
Registering Face ID Information
You can register information (face info, name, birthday) for up to 12 people to use with Face ID.
Access the setting screen.
z Press the n button, choose [Face ID
Settings] on the 4 tab, and then press the m button (p. 38).
57
Using Face ID
z Choose [Add to Registry], and then choose
[Add a New Face].
Register face information.
z Aim the camera so that the face of the person
you want to register is inside the gray frame at the center of the screen.
z A white frame on the person’s face indicates
that the face is recognized . Make sure a white frame is displayed on the face, and then shoot.
z If the face is not recognized, you cannot
register face information.
Save the settings.
z After [Register?] is displayed, press the qr
buttons to choose [OK], and then press the m button.
58
Using Face ID
X The [Edit Profile] screen is displayed.
Enter a name.
z Press the m button. z Press the opqr buttons to choose a
character, and then press the m button to enter it.
z Up to 10 characters can be used. z Choose or and press the m button to
move the cursor.
z Choose and press the m button to
delete the previous character.
z Press the n button to return to the edit
profile screen.
Enter a birthday.
z Press the op buttons to choose [Birthday],
and then press the m button.
z Press the qr buttons to choose an item. z Press the op buttons to specify the date
and time.
z When finished, press the m button.
Save the settings.
z Press the op buttons to choose [Save], and
then press the m button.
z After a message is displayed, press the qr
buttons to choose [Yes], and then press the m button.
59
Using Face ID
Continue registering face information.
z To register up to 4 more points of face
information (expressions or angles), repeat steps 2 – 3.
z Registered faces are more easily recognized
if you add a variety of face information. In addition to a head on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
The flash will not fire when following step 2.
If you do not register a birthday in step 5, Babies or Children icons
(p. 47) will not display in A mode.
You can overwrite registered face info, and add face info later if you have not
filled all 5 face info slots (p. 63).
60
Using Face ID
Shooting
If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting.
X When you point the camera toward a subject,
the names of up to 3 registered people will be displayed when they are detected.
z Shoot.
X Displayed names will be recorded in still
images. Even if people are detected, but their names are not displayed, the names (up to 5 people) will be recorded in the image.
People other than those registered may be mistakenly detected as
the registered person if they share similar facial features.
Registered people may not be correctly detected if the captured image or scene
differs drastically from the registered face information.
If a registered face is not detected, or not easily detected, overwrite registered
information with new face info. Registering face info right before shooting will allow for easier detection of registered faces.
If a person is mistakenly detected as another person and you continue shooting,
you can edit or erase the name recorded in the image during playback (p. 129).
Because faces of babies and children change quickly as they grow, you should
update their face info regularly (p. 63).
When information display is set to off (p. 36), names will not display, but will be
recorded in the image.
If you don’t want names to be recorded in still images, choose [Face ID Settings]
on the 4 tab, choose [Face ID], and then choose [Off].
You can check names recorded in images in the playback screen (simple
information display) (p. 122).
61
Using Face ID
Checking and Editing Registered Information
Checking Registered Face ID Information
Access the [Check/Edit Info] screen.
z Following step 1 on p. 57, choose [Check/
Edit Info] and press the m button.
Choose a person to check.
z Press the opqr buttons to choose a
person, and then press the m button.
Check the registered information.
z Press the op buttons to choose an item,
and then press the m button.
z Check the registered information.
Changing the Name or Birthday
Access the [Edit Profile] screen.
z Following steps 1 – 3 on p. 62, choose [Edit
Profile] and press the m button.
62
Using Face ID
Input changes.
z Press the op buttons to choose an item,
and follow steps 4 – 5 on p. 59 to input changes.
Even if you change names in [Edit Profile], the names recorded in
previously shot images will remain the same.
You can check and erase registered face information by choosing [Face Info
List] on the screen in step 3.
You can use the included software to edit registered names. Some characters
entered with the included software may not display on the camera, but will be correctly recorded in images.
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should update face information regularly, especially with babies and children, as their faces change quickly as they grow. You can also add face information when all 5 face info slots have not been filled.
Access the [Add Face Info] screen.
z On the screen in step 1 on p. 57, choose [Add
Face Info] and press the m button.
Choose the name of the person to overwrite.
z Press the opqr buttons to choose the
name of a person to overwrite, and then press the m button.
z If 4 or less face information slots are
registered, follow step 5 on p. 64 to add more face info.
63
Using Face ID
Access the face info screen.
z Read the message that displays, press the
qr buttons to choose [OK], and then press the m button.
z The face info screen is displayed.
Choose the face info to overwrite.
z Press the opqr buttons to choose the face
info to overwrite, and then press the m button.
Register face information.
z Follow steps 2 – 3 on p. 58 to shoot, and then
register the new face information.
z Registered faces are more easily recognized
if you add a variety of face information. In addition to a head on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
You can follow the above steps to register new face info when there is at least one
slot open, however you cannot overwrite any face information. Instead of overwriting face info, first erase unwanted existing info (p. 64), and then register new face information (p. 57) as needed.
Erasing Face Information
64
Access the [Check/Edit Info] screen.
z Following step 1 on p. 57, choose [Check/
Edit Info] and press the m button.
Using Face ID
Choose the name of the person whose face info you want to erase.
z Press the opqr buttons to choose the
name of the person whose face info you want to erase, and then press the m button.
Access the [Face Info List] screen.
z Press the op buttons to choose [Face Info
List], and then press the m button.
Choose the face info to erase.
z Press the m button, press the opqr
buttons to choose the face info you want to erase, and then press the m button.
z After [Erase?] is displayed, press the qr
buttons to choose [OK], and then press the m button.
z The selected face info will be erased.
Erasing Registered Information
You can erase information (face info, name, birthday) registered to Face ID. However, names recorded in previously shot images will not be erased.
Access the [Erase Info] screen.
z Follow step 1 on p. 57 and choose [Erase
Info].
65
Using Face ID
Choose the name of the person whose info you want to erase.
z Press the opqr buttons to choose the
name of a person to erase, and then press the m button.
z After [Erase?] is displayed, press the qr
buttons to choose [OK], and then press the m button.
If you erase a registered person’s info, you will not be able to display
their name (p. 124), overwrite their info (p. 63), or search images for them (p. 126).
You can also erase a person’s name only from images (p. 130).
66
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
z Press the m button, choose in the menu,
and choose the desired option (p. 37).
X Once the setting is complete, the screen
aspect ratio will be updated.
z To restore the original setting, repeat this
process but choose .
Same aspect ratio as HDTVs, used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35 mm film, used for printing images at 5 x 7-inch or postcard sizes.
Native aspect ratio of the camera screen, used for printing images at 3.5 x 5-inch or A-series sizes.
Square aspect ratio.
At aspect ratios other than , digital zoom (p. 51) is not available ([Digital
Zoom] is set to [Off]).
Zooming is not possible during movie recording at aspect ratios other than .
67
Image Customization Features
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see “Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose in the menu,
and choose the desired option (p. 37).
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose .
Guidelines for Choosing Resolution Based on Paper Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
5 x 7 in. Postcard
3.5 x 5 in.
z : For e-mailing images.
68
Image Customization Features
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically corrected as follows.
Access the [Flash Settings] screen.
z Press the n button, choose [Flash
Settings] on the 4 tab, and then press the m button (p. 38).
Configure the setting.
z Choose [Red-Eye Corr.], and then choose
[On] (p. 38).
X Once the setting is complete, R is displayed.
z To restore the original setting, repeat this
process but choose [Off].
Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for example).
You can also correct existing images (p. 152).
You can also access the screen in step 2 by pressing the r button and then the
n button.
69
Image Customization Features
Still Images
Correcting Greenish Image Areas from Mercury Lamps
In shots of evening scenes with subjects illuminated by mercury lamps, the subjects or background may appear to have a greenish tinge. This greenish tinge can be corrected automatically when shooting, using Multi-area White Balance.
Configure the setting.
z Press the n button, choose [Hg Lamp
Corr.] on the 4 tab, and then choose [On] (p. 38).
X Once the setting is complete, is
displayed.
z To restore the original setting, repeat this
process but choose [Off].
After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by mercury lamps may be corrected by mistake.
Try taking some test shots first, to make sure you obtain the desired results.
70
Image Customization Features
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Specifications” in the Getting Started guide.
Configure the setting.
z Press the m button, choose in the menu,
and choose the desired option (p. 37).
X The option you configured is now displayed.
z To restore the original setting, repeat this
process but choose .
Image
Quality
Resolution Frame Rate Details
1920 x 1080 24 fps For shooting in Full HD
1280 x 720 30 fps For shooting in HD
640 x 480 30 fps For shooting in standard definition
In and modes, black bars displayed on the top and bottom edges of the
screen indicate image areas not recorded.
71
Helpful Shooting Features
Still Images Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal reference while shooting.
Configure the setting.
z Press the n button, choose [Grid Lines]
on the 4 tab, and then choose [On] (p. 38).
X Once the setting is complete, grid lines are
displayed on the screen.
z To restore the original setting, repeat this
process but choose [Off].
Grid lines are not recorded in your shots.
72
Helpful Shooting Features
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway to enlarge the image area in the AF frame.
Configure the setting.
z Press the n button, choose [AF-Point
Zoom] on the 4 tab, and then choose [On] (p. 38).
Check the focus.
z Press the shutter button halfway. The face
detected as the main subject is now magnified.
z To restore the original setting, choose [Off] in
step 1.
The display will not magnify if a face was not detected, or if the
person is too close to the camera and their face is too large for the screen.
The magnified display will not appear when using the digital zoom (p. 51), digital
tele-converter (p. 111), Tracking AF (p. 113), Servo AF (p. 115) or when using a TV as a display (p. 171).
73
Helpful Shooting Features
Still Images
Checking for Closed Eyes
is displayed when the camera detects that people may have closed their
eyes.
Choose .
z Press the m button, choose in the menu,
and choose .
Configure the setting.
z Press the n button, choose [Blink
Detection] on the 4 tab, and then choose [On] (p. 38).
Shoot.
X A frame, accompanied by , is displayed
when the camera detects a person whose eyes are closed.
z To restore the original setting, choose [Off] in
step 2.
When you have specified multiple shots in $ mode, this function is only
available for the final shot.
74
Still Images
Customizing Camera Operation
Customize shooting functions on the 4 tab of the menu as follows. For instructions on menu functions, see “n Menu” (p. 38).
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions.
Configure the setting.
z Press the n button, choose [AF-assist
Beam] on the 4 tab, and then choose [Off] (p. 38).
z To restore the original setting, repeat this
process but choose [On].
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red­eye when the flash is used in low-light shots.
Access the [Flash Settings] screen.
z Press the n button, choose [Flash
Settings] on the 4 tab, and then press the m button (p. 38).
Configure the setting.
z Choose [Red-Eye Lamp], and then choose
[Off] (p. 38).
z To restore the original setting, repeat this
process but choose [On].
75
Customizing Camera Operation
Changing the Image Display Period After Shots
Change how long images are displayed after shots as follows.
Configure the setting.
z Press the n button, choose [Review] on
the 4 tab, and then choose the desired option (p. 38).
z To restore the original setting, repeat this
process but choose [2 sec.].
2 – 10 sec. Displays images for the specified time.
Hold
Off No image display after shots.
Displays images until you press the shutter button halfway.
Changing the Image Display Style After Shots
Change the way images are displayed after shots as follows.
Configure the setting.
z Press the n button, choose [Review Info]
on the 4 tab, and then choose the desired option (p. 38).
z To restore the original setting, repeat this
process but choose [Off].
Off Displays only the image.
Detailed Displays shooting details (p. 202).
Shows the area in the AF frame
Focus Check
magnified, enabling you to check the focus. Follow the steps in “Checking the Focus” (p. 125).
76
3
Other Shooting Modes
Shoot more effectively in various scenes, and take
shots enhanced with unique image effects or captured
using special functions
77
Still Images Movies
Specific Scenes
Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots.
Enter 4 mode.
z Set the mode switch to 4.
Choose a shooting mode.
z Press the m button, choose G in the menu,
and then choose a shooting mode (p. 37).
Shoot.
78
Still Images
I Shoot portraits (Portrait)
z Take shots of people with a softening effect.
Movies
Still Images
Shoot evening scenes without using a tripod (Handheld NightScene)
z Beautiful shots of evening scenes, created by
combining consecutive shots to reduce camera shake and image noise.
z When using a tripod, shoot in A mode
(p. 42).
Specific Scenes
Still Images
Shoot under low light (Low Light)
z Shoot with minimal camera shake and
subject blur even in low-light conditions.
Still Images Movies
S Shoot under water (Underwater)
z Natural-colored shots of sea life and
underwater scenery, when you use an optional waterproof case (p. 170).
z This mode can correct white balance and
match the effect of using a commercially available color-compensating filter (p. 80).
Still Images Movies
P Shoot with snowy backgrounds
(Snow)
z Bright, natural-colored shots of people
against snowy backgrounds.
Because the camera will shoot continuously in mode, hold it
steady while shooting.
In mode, shooting conditions that cause excessive camera shake
or similar issues may prevent the camera from combining images, and you may not be able to obtain the expected results.
In and S modes, shots may look grainy because the ISO speed (p. 104) is
increased to suit the shooting conditions.
mode resolution is (2304 x 1728) and cannot be changed.
79
Specific Scenes
Still Images Movies
Correcting White Balance
White balance can be manually corrected in S mode (p. 79). This adjustment can match the effect of using a commercially available color-compensating filter.
Choose S.
z Follow steps 1 – 2 on p. 78 and choose S.
Choose white balance.
z Press the m button, choose in the menu,
and press the m button again.
Adjust the setting.
z Move the zoom lever to adjust the correction
level for B and A, and then press the m button.
The camera will retain white balance correction levels even if you
switch to another white balance option in step 2, but correction levels will be reset if you record custom white balance data.
B represents blue and A, amber.
White balance can also be manually corrected by recording custom white
balance data (p. 107) before following the preceding steps.
80
Specific Scenes
Still Images
Making Skin Look Smoother (Smooth Skin)
You can apply a smoothening effect when shooting images of people. The effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be chosen as follows.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Access the setting screen.
z Press the p button.
Configure the setting.
z Press the op buttons to choose an item.
Choose the effect level by pressing the qr buttons, and then press the m button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Areas other than people’s skin may be modified.
Try taking some test shots first to make sure you obtain the desired
results.
The effect will be stronger for the face of the person detected as the main
subject.
81
Still Images Movies
Applying Special Effects
Add a variety of effects to images when shooting.
Choose a shooting mode.
z Follow steps 1 – 2 on p. 78 to choose a
shooting mode.
Shoot.
In , , , , , and modes, try taking some test shots
first, to make sure you obtain the desired results.
Still Images Movies
Shoot in vivid colors (Super Vivid)
z Shots in rich, vivid colors.
Still Images Movies
Posterized shots (Poster Effect)
z Shots that resemble an old poster or
illustration.
82
Applying Special Effects
Shooting with a Fish-Eye Lens Effect (Fish-eye Effect)
Shoot with the distorting effect of a fish-eye lens.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Choose an effect level.
z Press the p button, press the qr buttons to
choose an effect level, and then press the m button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
Still Images
83
Applying Special Effects
Still Images Movies
Shots Resembling Miniature Models (Miniature Effect)
Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
X A white frame is displayed, indicating the
image area that will not be blurred.
Choose the area to keep in focus.
z Press the p button. z Move the zoom lever to resize the frame, and
press the op buttons to move it.
For movies, choose the movie playback speed.
z Press the n button, and then press the
qr buttons to choose the speed.
84
Return to the shooting screen and shoot.
z Press the n button to return to the
shooting screen, and then shoot.
Applying Special Effects
Playback Speed and Estimated Playback Time (for One­Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
To switch the orientation of the frame to vertical, press the qr buttons in step
2. To move the frame, press the qr buttons again. To return the frame to horizontal orientation, press the op buttons.
Holding the camera vertically will change the orientation of the frame.
Movie image quality is at an aspect ratio of and at an aspect ratio of
(p. 67). These quality settings cannot be changed.
Still Images
Shooting with a Toy Camera Effect (Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Choose a color tone.
z Press the p button, press the qr buttons to
choose a color tone, and then press the m button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
85
Applying Special Effects
Standard Shots resemble toy camera images.
Warm Images have a warmer tone than with [Standard].
Cool Images have a cooler tone than with [Standard].
Still Images
Shooting With a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter is attached to the camera. You can adjust the effect level as desired.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Choose an effect level.
z Press the p button, press the qr buttons to
choose an effect level, and then press the m button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
86
Applying Special Effects
Still Images Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Choose a color tone.
z Press the p button, press the qr buttons to
choose a color tone, and then press the m button.
X A preview is shown of how your shot will look
with the effect applied.
Shoot.
B/W Black and white shots.
Sepia Sepia tone shots.
Blue Blue and white shots.
87
Applying Special Effects
Still Images Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and white.
Choose T.
z Follow steps 1 – 2 on p. 78 and choose T.
Access the setting screen.
z Press the p button.
X The original image and the Color Accent
image are displayed one after another.
X By default, green is the color that will be kept.
Specify the color.
z Position the center frame over the color to
keep, and then press the q button.
X The specified color is recorded.
Specify the range of colors to keep.
z Press the op buttons to adjust the range.
Recorded Color
z To keep only your specified color, choose a
large negative value. To keep colors similar to your specified color as well, choose a large positive value.
z Press the m button to return to the shooting
screen.
Using the flash in this mode may cause unexpected results.
In some shooting scenes, images may look grainy and colors may
not look as expected.
88
Applying Special Effects
Still Images Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that only one color can be replaced.
Choose Y.
z Follow steps 1 – 2 on p. 78 and choose Y.
Access the setting screen.
z Press the p button.
X The original image and the Color Swap
image are displayed one after another.
X By default, green will be replaced with gray.
Specify the color to replace.
z Position the center frame over the color to
replace, and then press the q button.
X The specified color is recorded.
89
Applying Special Effects
Specify the new color.
z Position the center frame over the new color,
and then press the r button.
X The specified color is recorded.
Specify the range of colors to replace.
z Press the op buttons to adjust the range. z To replace only your specified color, choose
a large negative value. To replace colors similar to your specified color as well, choose a large positive value.
z Press the m button to return to the shooting
screen.
Using the flash in this mode may cause unexpected results.
In some shooting scenes, images may look grainy and colors may
not look as expected.
90
Special Modes for Other Purposes
Still Images Movies
Auto Clip Recording (Movie Digest)
You can make a short movie of a day just by shooting still images. Before each shot, the camera will automatically record a movie clip of the scene. Each clip recorded that day is combined into a single file.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Shoot.
z To shoot a still image, press the shutter
button all the way down.
X Before shooting, the camera will
automatically record a clip about 2 – 4 seconds long.
Clips may not be recorded if you shoot a still image immediately after
turning the camera on, choosing mode, or operating the camera in other ways.
Battery life is shorter in this mode than in A mode, because clips
are recorded for each shot.
Any sounds from camera operations during movie recording will be
included in the movie.
Movies created in mode are saved as iFrame movies (p. 100).
Clips are saved as separate movie files in the following cases even if they were
recorded on the same day in mode.
- If the movie file size reaches about 4 GB or the total recording time reaches
approx. 30 minutes
- If a movie is protected (p. 135)
- If a movie has been edited (p. 153)
- If a new folder is created (p. 162)
- When the daylight saving time (p. 18) or time zone settings have been
changed (p. 164)
Some camera sounds will be muted. Sounds are not played when you press the
shutter button halfway, use camera controls, or trigger the self-timer (p. 157).
Movies created in mode can be viewed by date (p. 128).
91
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection (Smart Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you pressing the shutter button.
Choose .
z Follow steps 1 – 2 on p. 78 and choose ,
and then press the p button.
z Press the qr buttons to choose , and
then press the m button.
X The camera now enters shooting standby
mode, and [Smile Detection on] is displayed.
Aim the camera at a person.
z Each time the camera detects a smile, it will
shoot after the lamp lights up.
z To pause smile detection, press the q button.
Press the q button again to resume detection.
Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
You can also shoot as usual by pressing the shutter button.
The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
To change the number of shots, press the op buttons after choosing in
step 1. [Blink Detection] (p. 74) is only available for the final shot.
92
Special Modes for Other Purposes
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.
Choose .
z Follow steps 1 – 2 on p. 78 and choose ,
and then press the p button.
z Press the qr buttons to choose , and
then press the m button.
Compose the shot and press the shutter button halfway.
z Make sure a green frame is displayed around
the face of the person who will wink.
Press the shutter button all the way down.
X The camera now enters shooting standby
mode, and [Wink to take picture] is displayed.
X The lamp blinks and the self-timer sound is
played.
Face the camera and wink.
X The camera will shoot about two seconds
after detecting a wink by the person whose face is inside the frame.
z To cancel shooting after you have triggered
the self-timer, press the n button.
If the wink is not detected, wink again slowly and deliberately.
Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
Closing and opening both eyes at once will also be detected as a wink.
If winking is not detected, the camera will shoot about 15 seconds later.
To change the number of shots, press the op buttons after choosing in
step 1. [Blink Detection] (p. 74) is only available for the final shot.
If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
93
Special Modes for Other Purposes
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area (p. 112). This is useful when including yourself in group photos or similar shots.
Choose .
z Follow steps 1 – 2 on p. 78 and choose ,
and then press the p button.
z Press the qr buttons to choose , and
then press the m button.
Compose the shot and press the shutter button halfway.
z Make sure a green frame is displayed around
the face you focus on and white frames around other faces.
Press the shutter button all the way down.
X The camera now enters shooting standby
mode, and [Look straight at camera to start count down] is displayed.
X The lamp blinks and the self-timer sound is
played.
Join the subjects in the shooting area and look at the camera.
X After the camera detects a new face, the
lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.
z To cancel shooting after you have triggered
the self-timer, press the n button.
94
Special Modes for Other Purposes
Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
To change the number of shots, press the op buttons after choosing in
step 1. [Blink Detection] (p. 74) is only available for the final shot.
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this case, mount the camera on a tripod or take other measures to prevent camera shake.
Choose N.
z Follow steps 1 – 2 on p. 78 and choose N.
Choose the shutter speed.
z Press the o button, press the qr buttons to
choose the shutter speed, and then press the m button.
Check the exposure.
z Press the shutter button halfway to view the
exposure for your selected shutter speed.
Shoot.
On-screen image brightness in step 3, when you pressed the shutter
button halfway, may not match the brightness of your shots.
With shutter speeds of 1.3 seconds or slower, there will be a delay before you can shoot again, as the camera processes images to reduce noise.
Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (p. 119).
If the flash fires, your shot may be overexposed. In this case, set the flash to !
and shoot again.
95
Special Modes for Other Purposes
Still Images
High-Speed Continuous Shooting (High-speed Burst)
You can shoot a series of shots in rapid succession by holding the shutter button all the way down. For details on the continuous shooting speed, see “Specifications” in the Getting Started guide.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Shoot.
X Hold the shutter button all the way down to
shoot continuously.
The resolution is (2304 x 1728) and cannot be changed.
Focus, image brightness, and color are determined by the first shot.
Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions, camera settings, and the zoom position.
As more shots are taken, shooting may slow down.
When using Face ID (p. 57), the location in the image where the name is
recorded will be determined in the first shot, and will be recorded in the same place for further shots.
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and only the first image in that group will be displayed. To indicate that the image is part of a group, is displayed in the upper left of the screen.
If you erase a grouped image (p. 139), all images in the group are
also erased. Be careful when erasing images.
96
Special Modes for Other Purposes
Grouped images can be played back individually (p. 128) and ungrouped
(p. 129).
Protecting (p. 135) a grouped image will protect all images in the group.
Grouped images can be viewed individually when played back using Image
Search (p. 126) or Smart Shuffle (p. 133). In this case, images are temporarily ungrouped.
Grouped images cannot have their Face ID info edited (p. 129), be tagged as
favorites (p. 144), edited (pp. 142 – 152), categorized (p. 145), assigned as a start-up image (p. 159), printed (p. 177), be set for printing individually (p. 186), or added to a Photobook (p. 188). To do these things, either view grouped images individually (p. 128) or cancel grouping (p. 129) first.
97
Special Modes for Other Purposes
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then use the included software to combine them into a panorama.
Choose x or v.
z Follow steps 1 – 2 on p. 78 and choose x or
v.
Take the first shot.
X The first shot will determine the exposure and
white balance.
Take additional shots.
z Compose the second shot so that it partially
overlaps the image area of first shot.
z Minor misalignment of overlapping portions
will be corrected automatically when the images are combined.
z Take up to 26 shots, the same way you took
the second shot.
Finish shooting.
z Press the m button.
Use the software to combine the images.
z For instructions on merging images, refer to
the ImageBrowser EX User Guide.
This function is not available when using a TV as a display while shooting
(p. 172).
98
Movies
Shooting Various Movies
Shooting Super Slow Motion Movies
You can shoot fast-moving subjects for playback later in slow motion. Note that sound is not recorded.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
Choose a frame rate.
z Press the m button, choose in the menu,
and choose the desired frame rate (p. 37).
X The option you configured is now displayed.
Shoot.
z Press the movie button.
X A bar showing the elapsed time is displayed.
Maximum clip length is approx. 30 sec.
z To stop movie recording, press the movie
button again.
Frame Rate Image Quality
240 fps (320x240) Approx. 4 min.
120 fps (640x480) Approx. 2 min.
Playback Time
(For a 30-sec. Clip)
Zooming is not available during recording, even if you move the zoom
lever.
Focus, exposure, and color are determined when you press the
movie button.
The movie will be played back in slow motion when you follow steps 1 – 3 on
p. 122.
You can change the playback speed of movies shot in mode by using the
included software. For details, refer to the ImageBrowser EX User Guide.
99
Shooting Various Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or devices. You can quickly edit, save, and manage iFrame movies using the included software.
Choose .
z Follow steps 1 – 2 on p. 78 and choose .
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not recorded.
Shoot.
z Press the movie button. z To stop movie recording, press the movie
button again.
The resolution is (p. 71) and cannot be changed.
iFrame is a video format developed by Apple.
100
Loading...