Ensure that you read the Safety Precautions (pp. 144–149)
p. 7
Confirming the Package Contents
The following items are included in the package. If something is missing
please contact the retail outlet at which you purchased the product.
a
de
g
i
CameraMemory Card
Interface Cable
IFC-400PCU
Canon Digital Camera
Solution Disk
User Guides
Getting Started
AA-size Alkaline
bc
h
Batteries (x2)
AV C a bl e
AVC-DC300
EWS Booklet
Canon Digital Camera
Manuals Disk
f
(32MB)
Wrist Str ap
WS-800
You may not be able to achieve the full performance of this camera
with the included memory card.
You can use SD memory cards, SDHC (SD High Capacity)
memory cards, MultiMediaCards, MMCplus cards and HC
MMCplus cards in this camera. These cards are collectively
referred to as memory cards in this guide.
Viewing the PDF Manuals
Adobe Reader must be installed to view the PDF Manuals. If
this software is not installed in your computer, access the
following web site and download the software.
http://www.adobe.com
Let’s Get Started!
First…
1
Getting Started
This section explains how to prepare the camera for use and the
basics of shooting, viewing and printing images. Start out by
familiarizing yourself with the camera and mastering the basics.
Next…
p. 7
PDF Manuals
Once you have mastered the basics, use the camera’s many features
to shoot more challenging photos.
The PDF manuals are included in the
supplied CD-ROM.
Adobe Reader is required to view the PDF manuals.
Please download from http://www.adobe.com
Table of Contents
2
Table of Contents
Items marked with a are lists or charts that summarize camera
functions or procedures.
for the flash when you press the
MENU button while this screen is
displayed (p. 70).
- SlowSynchro, Red-Eye Corr., Red-Eye Lamp
Available Shooting Modes p. 176
This mark denotes issues that may affect the camera’s
operation.
This mark denotes additional topics that complement the
basic operating procedures.
Explanations in this guide are based on the camera's default settings
at time of purchase. Specifications are subject to change without prior
notice. As a result, the illustrations and screenshots used in this guide
may differ from the actual camera.
59
Mode dial position
Some functions may not be
Commonly Used Shooting Functions
available in certain shooting modes.
If there is no notation to that effect,
the function may be used in all
modes.
5
Please Read
6
Please Read
Test S hots
Before you try to photograph important subjects, we highly recommend that you
shoot several trial images to confirm that the camera is operating and being
operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are
not liable for any consequential damages arising from any malfunction of a
camera or accessory, including memory cards, that results in the failure of an
image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should
never be used in a manner that infringes upon or contravenes international or
domestic copyright laws and regulations. Please be advised that in certain cases
the copying of images from performances, exhibitions, or commercial properties
by means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon European
Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please refer to the Canon European
Warranty System (EWS) Booklet supplied with your camera.
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for an
extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less than
0.01% of the pixels may occasionally misfire or appear as red or black dots.
This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera's video signal format to the one used in your region before
using it with a TV monitor.
Language Setting
Please see Setting the Display Language(p. 13) to change the language setting.
Getting Started
z Preparations
z Shooting Still Images
z Viewing Still Images
z Erasing
z Printing
z Embedding the Date in the Image Data
z Shooting Movies
z Viewing Movies
z Downloading Images to a Computer
z System Map
7
Getting Started
Capture Your Best Memories
8
Capture Your Best Memories
Preparations
9
Preparations
Installing the Batteries and Memory Card
a Slide the battery cover lock in the direction of the arrow
(a) and hold it there while moving the entire cover in
the direction of the arrow (b) and opening it up in the
direction of the arrow (c).
Hold lock open
a
Battery Cover Lock
c
b
Getting Started
Be sure to hold the battery cover
lock open while sliding the entire
cover in the direction of the
arrow.
Hold lock open
Preparations
10
b Install two batteries.
Positive end (+)Negative end (–)
Caution!
Check the battery
terminals for the correct
Getting Started
orientation.
c Insert the memory card until it clicks into place.
Caution!
Check the memory card for the correct
orientation.
Only SD and SDHC memory cards
Write Protect Tab
Confirm that the write protect
tab is unlocked.
Back
Front
The camera may fail to detect the memory card or malfunction
if the memory card is inserted backward by mistake.
Preparations
11
d Close the cover (a), and press downward as you slide
it until it clicks into place (b).
a
b
To Remove the Memory Card
• Push the memory card with your finger until
the memory card clicks and then release it.
It is recommended to use the wrist strap to avoid dropping the
camera during use.
Getting Started
Preparations
12
Setting the Date and Time
The Date/Time settings menu will appear the first time the power is
turned on.
ON/OFF
Button
a
b
Getting Started
c
Button
/ / / Buttons
Button
a Press the ON/OFF button.
b Select the month, day, year and
time, and the display order.
1. Use the W or X button to select a
category.
2. Use the S or T button to set the
value.
c Press the FUNC./SET button.
To Change a Previously Set Date/Time
Perform Steps b–c above after using the following procedures to
display the Date/Time settings window.
1. Press the MENU button.
2. Use the W or X button to select the
(Set up) menu.
3. Use the S or T button to select
[Date/Time].
4. Press the FUNC./SET button.
5. Press the MENU button.
Preparations
Setting the Display Language
You can change the language displayed in the LCD monitor menus
and messages.
13
Getting Started
a
b
Button
Button
bd
Mode Dial
c
/ / / Buttons
a Set the mode dial to (Playback).
b Hold down the FUNC./SET button and press the MENU
button once.
c Use the S, T, W or X button to select a language.
d Press the FUNC./SET button.
Shooting Still Images
14
Shooting Still Images
ON/OFF
a
b
Button
( Auto Mode)
Shutter Button
de
Getting Started
Mode Dial
a
Press the ON/OFF button.
• The start-up sound will play and the start-up image will display in
the LCD monitor.
• Pressing the ON/OFF button again turns the power off.
• To switch to the setting that mutes all sound, press and hold the
MENU button while pressing the ON/OFF button. The [Mute]
setting also can be changed in the (Set up) menu.
b Select a shooting mode.
1. Set the mode dial to (Auto).
c Aim the camera at the subject.
Avoiding Camera Shake
Keep your arms tight against your body
while holding the camera firmly by the sides.
Using a tripod is also effective.
Indicator
d Press the shutter button lightly (press halfway) to set
the focus.
• When the camera focuses, it beeps twice and the indicator lights
green (orange when the flash fires).
Shooting Still Images
e Without changing anything else, press the shutter
button all the way (press fully) to shoot.
• The shutter sound will play once and the image will record.
• Recorded images are displayed on the LCD monitor for
approximately 2 seconds* immediately after shooting
(Rec. Review). You can also shoot while the image is displayed.
* You can change the interval for which images are displayed by configuring the
[Review] item in the (Rec.) menu.
• The image will continue to display after shooting if you keep the
shutter button pressed.
• The indicator will blink green and the file will record to the
memory card.
To Shoot Images in Focus
The camera automatically sets the focus when you press the shutter
button halfway*.
* The shutter button has a two-stage action. Pressing it down to the first stage is
referred as “pressing halfway”.
Press halfway
to set the focus
Correct
Beep,
beep…
Press fullyJust pressing fully
Incorrect
15
Getting Started
Shooting Preparations
Complete: lights green
(orange when the flash fires)
AF frames will display in
green on the LCD monitor
at the points of focus.
Recording:
blinks green
Viewing Still Images
16
Viewing Still Images
a
Getting Started
Mode Dial
b
/ Buttons
a Set the mode dial to (Playback).
b Use the W or X button to display
the image you wish to view.
• Use the button to move to the
previous image and the button to
move to the next image.
• The images advance more quickly if
you keep the button pressed
continuously, but they will appear
coarse.
z Setting [Resume] to either [Last seen]* or [Last shot] in the
(Play) menu allows you to specify the image to display in
Playback mode (* Default setting). If you select [Last seen],
the last image viewed will display (Resume Playback).
z The following actions will display the most recent image
regardless of the [Resume] settings.
Shooting an image, changing the memory card, or editing an
image on the memory card using a computer.
Erasing
a
Mode Dial
Erasing
17
Getting Started
b
/ Buttons
Set the mode dial to (Playback).
a
c
b
Button
Button
b Use the W or X button to select an image to erase and
press the button.
c Confirm that [Erase] is selected and press the FUNC./
SET button.
• To exit instead of erasing, select
[Cancel].
Please note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
Printing
18
Printing
c
ON/OFF
Button
Getting Started
c
a
Mode Dial
d
/ Buttons
d
Button
a Connect the camera to a direct print compatible printer.
• Open the camera’s terminal cover and insert the interface cable
all the way into the connector.
• See the printer’s user guide for connection instructions.
• Since this camera uses a standard protocol (PictBridge), you can
use it with other PictBridge-compliant printers in addition to
Canon-brand printers. Please see the Direct Print User Guide for
more information.
b Turn on the printer.
c Set the camera’s mode dial to (Playback) and press
the ON/OFF button.
• The button will light blue.
d Use the W or X button to select an image to print and
press the button.
• The button will blink blue and printing will start.
Printing
19
Printing From a Print List
You can add images directly to a print list by merely pressing the
button immediately after shooting or playing back an image.
You can then print the images from the print list easily, when
connecting the camera to a printer.
Adding to a Print List
a Press the button (still images only).
b Add to the print list.
1. Use the S or T button to set the
number of copies to print.
2. Use the W or X button to select
[Add].
3. Press the FUNC./SET button.
• To remove an image from the print
list, press the button again, use the W or X button to
select [Remove] and press the FUNC./SET button.
Printing Images in a Print List
This explanation is based on the use of a Canon SELPHY ES series
or SELPHY CP series printer.
a
Connect the camera to a printer.
b Print.
1. Use the S or T button to select
[Print now].
• You can use the W or X button to
confirm the images added to the
print list.
2. Press the FUNC./SET button.
• Printing will start.
• If printing is halted and resumed, printing will start from the
next image in the queue.
Number of copies to print
Getting Started
Embedding the Date in the Image Data
20
Embedding the Date in the Image Data
This section explains how to embed date information on images as
they are recorded (Date Stamp).
• The date stamp cannot be deleted from the image data once it has
been embedded. Ensure that the camera's date/time is set correctly
beforehand (p. 12).
• The image size is fixed to the 2M (1600 x 1200) setting and the
Getting Started
compression to Fine (appropriate for printing L-size or postcard-size
prints).
b
ON/OFF
Button
a
Mode Dial
c
/ / / Buttons
a Press the ON/OFF button.
b Set the mode dial to (Auto).
• You can also make this setting in or mode.
c
Button
Button
Embedding the Date in the Image Data
c Select (Date Stamp).
1. Press the FUNC./SET button.
2. Use the S or T button to select
.
3. Use the W or X button to select
.
• The area that will not print displays
in gray.
• Pressing the MENU button allows you to switch to [Date &
Time] using the W or X button.
You can use the following methods to imprint the date on images
lacking imprinted date stamps.
Set with the camera’s Digital Print Order Format (DPOF) function.
•
Set the [Date] option to [On] in [Print Settings] in the (Print) menu.
• Connect the camera to a printer and imprint the date.
See the Direct Print User Guide.
• Insert a memory card into the printer and imprint the date.
See your printer user guide.
• Use the supplied software.
See the Software Starter Guide.
21
Getting Started
Shooting Movies
22
Shooting Movies
ON/OFF
a
Button
b
Getting Started
Mode Dial
a Press the ON/OFF button.
b Select a shooting mode.
1. Set the mode dial to (Movie).
• Confirm that the camera is set to
(Standard).
c Aim the camera at the subject.
z Do not touch the microphone while
recording.
z Do not press any buttons other than
the shutter, or button. The
sound that buttons make will be
recorded in the movie.
( Standard Mode)
Shutter Button
de
Indicator
Microphone
Shooting Movies
d Press the shutter button lightly (press halfway) to set
the focus.
• An electronic beep will sound twice and the indicator will light
green when the camera focuses.
• The exposure, focus and white balance are automatically set
when you press the button halfway.
e Without changing anything else, press the shutter
button all the way (press fully) to shoot.
• Recording starts.
• During the recording, the elapsed
recording time and [z Rec] will
display in the LCD monitor.
Elapsed Time
f Press the shutter button again (press fully) to stop
recording.
• The indicator will blink green and the data will be recorded onto
the memory card.
• Recording will stop automatically when the maximum recording
time elapses, or the built-in memory or memory card become full.
23
Getting Started
Viewing Movies
24
Viewing Movies
b
ON/OFF
a
Button
Getting Started
Mode Dial
cd
/ / / Buttons
a
Press the ON/OFF button.
b Set the mode dial to (Playback).
c Use the W or X button to display
a movie and press the FUNC./
SET button.
• Images with a icon are movies.
d Use the W or X button to select
(Play) and press the FUNC./
SET button.
• The movie will start playing.
• If you press the FUNC./SET button
during playback, you can pause and
restart the movie.
• You can adjust the playback volume
with the S or T button.
cd
Button
Downloading Images to a Computer
Downloading Images to a Computer
You are recommended to use the supplied software to download
images to your computer.
Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera
• Interface cable supplied with the camera
System Requirements
Please install the software on a computer meeting the following
minimum requirements.
Windows
OSWindows Vista
Computer ModelThe above OS should be pre-installed on computers with built-
CPUWindows Vista
RAMWindows Vista
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/High Color (16 bit) or better
Macintosh
OSMac OS X (v10.3–v10.4)
Computer ModelThe above OS should be pre-installed on computers with built-
CPUPowerPC G3/G4/G5 or Intel Processor
RAM256 MB or more
InterfaceUSB
Free Hard Disk
Space
Display1,024 x 768 pixels/32,000 Colors or better
Windows XP Service Pack 2
Windows 2000 Service Pack 4
in USB ports.
Windows XP/Windows 2000
Windows XP/Windows 2000
• Canon Utilities
- ZoomBrowser EX
- PhotoStitch
• Canon Camera TWAIN Driver
in USB ports.
• Canon Utilities
- ImageBrowser
- PhotoStitch
: Pentium 1.3 GHz or higher
: Pentium 500 MHz or higher
: 512 MB or more
: 256 MB or more
: 200 MB or more
: 40 MB or more
: 25 MB or more
: 300 MB or more
: 50 MB or more
25
Getting Started
Downloading Images to a Computer
26
Preparing to Download Images
Windows 2000 users must install the software before connecting
the camera to the computer.
a Installing the software.
Getting Started
Windows
1. Place the Canon Digital Camera Solution Disk in the
computer's CD-ROM drive.
2. Click [Easy Installation].
Follow the onscreen messages to
proceed with the installation.
3. Click [Restart] or [Finish] once the
installation is complete.
When the installation is complete,
[Restart] or [Finish] will display. Click
the button that appears.
4. Remove the CD-ROM from the
drive when your normal desktop
screen appears.
Macintosh
Double-click the icon in the CDROM window. When the installer
panel appears, click [Install]. Follow
the onscreen instructions to
proceed.
Downloading Images to a Computer
b Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
• Open the Camera's terminal cover and insert the interface
cable all the way into the connector.
USB Port
Interface Cable
DIGITAL Terminal
c Preparing to download images to the computer.
1. Set the camera's mode dial to
(Playback) and press the ON/OFF
button.
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
ON/OFF Button
27
Getting Started
Downloading Images to a Computer
28
d Displaying the Camera Window.
Windows
Select [Canon CameraWindow] and
click [OK].
Getting Started
If this event dialog does not appear, click the [Start] menu and
select [All Programs] or [Programs], followed by [Canon
Utilities], [CameraWindow], [CameraWindow] and
[CameraWindow].
CameraWindow will display.
Macintosh
CameraWindow will appear when you establish a connection
between the camera and computer. If it fails to appear, click the
[CameraWindow] icon on the Dock (the bar which appears at the
bottom of the desktop).
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera (Direct
Transfer) section (p. 29) (except Windows 2000).
z Please refer to the Software Starter Guide regarding how to
download images using the computer.
z If you are using Windows 2000, please download images
using computer commands.
Loading...
+ 152 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.