Canon K10294 User Manual

Quick Start Guide

Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference.

Table of Contents

Package Contents ........................................ 1 Using the Scanner Buttons ..........................5

Installing the Software................................ 2 Scanning Film ...............................................6

Preparing the Scanner................................. 3

Try Scanning................................................. 4

FCC Notice (U.S.A. Only)

For 120V, 60Hz model Model Number : K10294

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 1-516-328-5600

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com/environment.

(EEA: Norway, Iceland and Liechtenstein)

For Customers in Europe, Middle-East, Africa and Russia only

For Canon Customer Support contacts, please see the back cover of the European Warranty System (EWS) Booklet or visit www.canon-europe.com

Warning

When you use this product, you should pay attention to the following legal issues:

• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in criminal and/or civil liability.

• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.

• Adobe®, Adobe® RGB (1998) and Photoshop® Elements are either registered trademarks or trademarks of Adobe Systems Incorporated in the U.S. and/or other countries.

• Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries.

•Macintosh® and Mac® are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

•

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

Package Contents

Scanner and Accessories

Package Contents

Scanner USB Cable

Film Guides (for 35mm film strip/slide)

Documentation

• Quick Start Guide (this document)

• Additional Documents

CanoScan Setup Utility CD-ROM

• Software Programs

- ScanGear (scanner driver)

- CanoScan Toolbox

- ArcSoft PhotoStudio

- Presto! PageManager (Windows only)

- ScanSoft OmniPage SE (not supported for Windows 98 First Edition)

- Adobe RGB (1998) (Windows only)

• On-screen Manuals

- Scanning Guide (for ScanGear, CanoScan Toolbox, and troubleshooting)

- Manuals for bundled application programs

AC Adapter

Film Guide (for 120 format film)

Adobe Photoshop Elements 4.0 CD-ROM

• Windows CD-ROM (English/French/German)

• Macintosh CD-ROM (English)

Refer to the instruction sheet for installing.

*In this guide, Windows XP screenshots are used to illustrate explanations common to all

operating systems.

Installing the Software

• Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware Wizard appears, click [Cancel].

• Quit all running applications before installation, including anti-virus software.

• For Windows 2000/XP, log in as an administrator to install the software.

1 Place the CanoScan Setup Utility CD-ROM in the

drive.

CanoScan Setup Utility program starts.

• For Macintosh: Double-click the [Setup] icon. Enter the administrator ID and password on the authentication dialog box.

2 Click [Easy Install] on the main menu.

3 Click [Install] to start installation.

Carefully read the License Agreement, and then click [Yes] to proceed. Follow the on-screen instructions to perform the installation. All the software programs and on-screen manuals will be installed on your computer.

4 When the Information dialog is displayed, click [ok]

to restart your computer.

• For Macintosh: Skip this step and go to the step 5.

5 Follow the on-screen instructions to register your

product.

6 When the installation is complete, click [Exit].

• For Macintosh: Click [Restart] to restart your computer.

• Make sure to remove the CD-ROM from the drive and store it in a safe place.

• If you encounter a problem during installation, see "Troubleshooting" in the Scanning Guide.

• If you later upgrade your OS to Windows XP, reinstall the software.

+ 8 hidden pages