Canon iR5800C, iR5800CN, iRC6800C, iRC6800CN ir6800c-027

Service Bulletin

Issued by Canon Europa N.V.

Copier Color

Hardware

Model:
iR 5800C

iR 5800CN
iR 6800C
iR 6800CN

Revised:

Permanent countermeasure added to factory measures.

Location:

Reader Frame Assembly

Subject:

Countermeasure against the error occurrence “E202-0001/0002”, due to the breakage of IC6

Detail:

<Symptom>
The errors “E202-0001/0002”, occur due to the breakage of IC6 [1]
<Cause>
The installation or uninstallation of the Flexible Flat Cable [2], which controls the current flow into the Scanner
Drive Motor, may not have been done successfully. #34 May be broken, an overcurrent may flow into the
Interface PCB, the IC6 [1] may be broken and may lead to occur smoke.

Ref No.:

iR6800C-027 Rev. 1
(F2-T01-0M3-10064-02)

Date:

October, 2005

P-1 INTERFACE PCB ASSEMBLY

[1] IC6
[2] CABLE, FLEXIBLE FLAT

(1/3)

<Factory Measures>

1. Temporary countermeasure

Add chip resistor to C49 (unused part) [3] on the Interface PCB.

P-2 Enlarged view of the Interface PCB

iR6800C-027 Rev. 1

[3] C49 Resistor added part

Revision number sealed place (last two

[4]

figures show the revision number)

P-3 Old type

C49 (unused part)
Revision number is 01

P-4 New type

Chip resistor is added to
C49

Revision number is 02

(2/3)