Download Free Service Manual at http://printer1.blogspot.com
FY8-13GS-000
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical
theory, installation, maintenance, and repair of products. This manual covers all
localities where the products are sold. For this reason, there may be information in this
manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to
improvements or changes in products. When changes occur in applicable products or in
the contents of this manual, Canon will release technical information as the need arises.
In the event of major changes in the contents of this manual over a long or short period,
Canon will issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademar ks
The product names and company names used in this manual are the registered
trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this
manual may not be copied, reproduced or translated into another language, in whole or
in part, without the written consent of Canon Inc.
Download Free Service Manual at http://printer1.blogspot.com
Refers to the Copier Basics Series for a better understanding of the contents.
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
i
INTRODUCTION
2.Outline of the Manual
This Service Manual contains basic information needed to service the iR5000/iR6000 and
its accessories (i.e., side paper deck, shift tray) in the field, conducted for the purpose of
maintaining its product quality and a specific level of performance. A separate Service
Manual is made available for each of its accessories (except for the side paper deck and shift
tray); for details, refer to the appropriate manual.
This Service Manual consists of the following chapters:
1. System Unit
Chapter 1Introduction:features, specifications, names of parts, func-
tions, operation, system configuration, routine maintenance by the user
Chapter 2Main Controller:functional construction, outline of electrical
circuitry, principles of operation of the image
processing system, power supply
Chapter 3Installation:site conditions and installation procedure,
relocation of the machine, installation of accessories
2. Reader Unit
Chapter 1Basic Operation:functional construction, outline of electrical
circuitry, basic sequence of operations
Chapter 2Original Exposure System:principles of operation of the exposure sys-
tem, timing of operation, disassembly/assembly and adjustment
Chapter 3Image Processing System:principles of operation of the image process-
ing system, timing of operation, disassembly/
assembly and adjustment
3. Printer Unit
Chapter 1Introduction:safety of the laser, image formation, auxiliary
processes
Chapter 2Sequence of Operations:basic operations, outline of electrical cir-
cuitry, basic sequence of operations
Chapter 3Laser Exposure System:principles of operation of the laser exposure
system, timing of operation, disassembly/
assembly and adjustment
Chapter 4Image Formation System:principles of operation of the image forma-
tion system, timing of operation, disassembly/assembly and adjustment
Chapter 5Pickup/Feeding System:principles of operation of the pickup/feeding
system, timing of operation, disassembly/
assembly and adjustment
Download Free Service Manual at http://printer1.blogspot.com
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
iii
INTRODUCTION
The following rules apply throughout this Service Manual:
1.Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams,
accompanies the symbol
represents the path of mechanical drive; where a signal name
, the arrow indicates the direction of the electric signal.
The expression “turn on the power” means flipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine
with power.
2.In the digital circuits, ‘1’ is used to indicate that the voltage level of a given signal is
“High,” while ‘0’ is used to indicate “Low.” (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in “DRMD*” indicates that the
DRMD signal goes on when ‘0’.
In practically all cases, the internal mechanisms of a microprocessor cannot be
checked in the field. Therefore, the operations of the microprocessors used in the machines are not discussed: they are explained in terms of from sensors to the input of the
DC controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant Service Information bulletins and be able to identify and isolate
faults in the machine.
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[6]
Figure 1
v
Download Free Service Manual at http://printer1.blogspot.com
INTRODUCTION
Important!
Be sure to turn off the main power switch and disconnect the power plug before starting
to disassemble the machine; in addition, keep the following in mind for the work:
1.In printer mode, turning off the main power switch can result in the loss of data being
processed. Check to make sure that the Execution/Memory lamp on the control panel
is off before operating the main power switch.
2.Do not turn off the main power switch while downloading is taking place. Otherwise,
the machine may become disabled.
3.The cassette heater and the drum heater remain powered as long as the environment
switch and the heater switch are on (even when the main power switch is off).
4.Not all power is removed when the front cover is opened if the main power switch is
on, requiring care.
[1]
Counter Check
Display Contrast
COPY Mail BOX SCAN
Reset
Guide
Additional Function
Interrupt
Processing/Data
123
456
789
0CID
Energy Saver
ON/OFF
Stop
Start
Clear
Power
Error
[2]
[3]
[4]
[1] Execution/Memory lamp
[2] Main power switch
[3] Cassette heater switch
[4] Environment switch
Figure 2 Arrangement of the Switches
vi
COPYRIGHT
Download Free Service Manual at http://printer1.blogspot.com
The machine comes with a hard disk as standard, enabling memory-based sorting. The
machine is capable of making multiple copies by reading the original once.
1.0.3 Stackless , Duplexing Mechanism
The machine moves paper seamlessly when making double-sided copies without any
waste as by stacking it in a duplexing unit.
1.0.4 Large-Capacity Paper Source
The addition of an accessory will enable accommodation of as many as 7650 sheets of pa-
per (80 g/m
2
).
Right front paper deck: 1500 sheets
Left front paper deck: 1500 sheets
Cassette 3: 550 sheets
Cassette 4: 550 sheets
Multifeeder: 50 sheets
Paper Deck-G1 (accessory): 3500 sheets
1.0.5 Variety of Delivery Processing (with accessories)
Finishing: 1-point or 2-point stapling (Finisher)
Saddle stitching: middle binding and folding for delivery (Saddle Finisher-F2 only)
Punching: making binding holes for delivery (Puncher Unit)
Specifications
Indirect statophotography
Corona
Laser
Auto or manual
Dry, 1-component toner production
Auto
Front paper deck (2 holders)
Front cassette (2 holders)
Manual
Manual feed tray
(5.5 mm deep; about 50 sheets of 80 m
Corona
Corona (static separation)
Blade
Heat roller
100 V: 700 W (main) + 470 W (sub)
120/230 V: 600 W (main) + 600 W (sub)
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
Download Free Service Manual at http://printer1.blogspot.com
CHAPTER 1 GENERAL DESCRIPTION
Item
Claw
Tray
Paper deck
(right, left)
Cassette 3/4
Delivery tray
Hard disk
Non-image
width
Leading edge
Trailing edge
Left/right (1st side)
Auto clear
Auto power off
Low-power mode
Power save
Auto sleep
mode
Energy save mode
Accessories
Specifications
None
162 mm/16.4 in deep (approx.; about 1500 sheets of 80 g/
2
m
paper)
55 mm/2.2 in deep (approx.; about 550 sheets of 80 g/m
2
250 sheets (approx.; of 80 g/m
)
2
)
6.4 GB or 5.1 GB*1
Direct/Enlarge-Reduce: 4.0 ± 1.5/-1.0mm < 4.5 ± 1.8mm >*2
Direct/Enlarge-Reduce: 2.0 ± 1.5mm < 2.0 ± 1.8 mm >*2
Direct/Enlarge-Reduce: 2.5 ± 1.5mm < 2.5 ± 2.0 mm >*2
Yes (2 min standar d; may be changed between 0 and
9 min in 1-min increments)
No
Yes (15 min standard; may be changed in user mode
for 10, 15, 20, 30, 40, 50, 60, 90 min and 2, 3, 4 hr)
Yes (60 min standar d; may be changed to 10, 15, 20, 30, 40,
50, 60, 90 min, 2, 3, 4 hr in user mode)
Yes (-10% standar d; may be changed to -10%, -25%,
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
1-7 S
Download Free Service Manual at http://printer1.blogspot.com
CHAPTER 1 GENERAL DESCRIPTION
2.1.4 Others
Item
Operating
environment
Temperature
Humidity
Atmospheric
pressure
100V (50/60Hz)
Power supply
120V (50/60Hz)
220V/60Hz
230V (50/60Hz)
Power
consumption
Maximum
Stand by
Noise
Continuous
copying
During copying
During standby
Ozone (after 2500, 000 prints)
Width
Dimensions
Depth
Height
Weight
Consumables
Copy paper
Toner
Specifications
15 to 30°C/59 to 86°F
5% to 80%RH
810.6 to 1013.3 hpa (0.8 to 1.0 atm)
iR5000iR6000
LQHxxxxxLQKxxxxx
LQJxxxxxLQLxxxxx
NRFxxxxxNRHxxxxx
NRGxxxxxNRJxxxxx
PKMxxxxxPKLxxxxx
PKKxxxxxPKZxxxxx
PKLxxxxxPLHxxxxx
QCWxxxxxQCXxxxxx
PBZxxxxxRCYxxxxx
SCKxxxxxSCLxxxxx
TBZxxxxxTCMxxxxx
UFMxxxxxUFNxxxxx
iR5000: 1.3 kW or lessiR6000: 1.3 kW or less
iR5000: 282 WhiR6000: 282 Wh
(approx.; reference)(approx.; reference)
iR5000: 995 Wh (approx.; reference only)
iR6000: 1008 Wh (approx.; reference only)
By sound power level (impulse mode)
iR5000: 71 dB or lessiR6000: 78 dB or less
iR5000: 50 dB or lessiR6000: 55 dB or less
0.05 ppm or less
852 mm/33.5 in
726 mm/28.6 in
1134 mm/44.7 in
210 kg (approx.)/470.4 lb (approx.)
Keep wrapped, and store avoiding humidity.
Avoid direct sunlight, and store at 40°C,
85% RH or less.
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
Download Free Service Manual at http://printer1.blogspot.com
2.2 Paper Deck-G1
CHAPTER 1 GENERAL DESCRIPTION
Item
Pickup
Paper accommodation
Copy paper type
Paper stack
Serial number
Paper size switch
Dimensions
Weight
Power supply
Operating environment
Temperature
Humidity
Atmospheric pressure
Specifications
Clawless (retard)
Side tray
2
• Plain paper (64 to 80 g/m
)
A4, B5, LTR
• Tracing paper (SM-1)
A4, B5
• Colored paper (Canon-recommended)
A4
Thick paper (90 to 200 g/m
2
)
A4, B5, LTR
Height: 385 mm (approx.; about 3500 sheets)
A4 type: XCQ xxxxx/LTR type: XCRxxxxx
By size guide plate (in steps),
in service mode (OPTION)
326.2 (W) × 583 (D) × 574.5 (H) mm/
12.8 (W) × 23.0 (D) × 22.6 (H) in
46 kg (approx.)/101.4 lb (approx.)
DC from host machine
Same as host machine
T01-202-01
The specifications are subject to change for product improvement.
2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
Download Free Service Manual at http://printer1.blogspot.com
3.Names of Par ts
3.1 External View
CHAPTER 1 GENERAL DESCRIPTION
[13]
[12]
[9]
[10]
[11]
[8]
[1]
[16]
[4]
[14]
[3]
[15]
[2]
[5]
[7]
[6]
[1] ADF
[2] Main power switch
[3] Original pickup tray
[4] Manual feed tray
[5] Right upper cover
[6] Right lower cover
[7] Waste toner box, grip,
drum protection sheet case
[8] Right front paper deck
[9]Left front paper deck
[10] Cassette 3
[11] Cassette 4
[12] Front cover
[13] Delivery tray
[14] Parallel connector for downloading
[15] Slot for expansion board
[16] Control panel power switch