Canon imageCLASS LBP701BC Quick Setup Manual

Quick Setup Guide

KOR

ཏ㜃#⑯ㆣ#⢓᏿⑧

THA

คู่มือการติดตั้งด่วน

VIE

Hướng dẫn Cài đặt Nhanh

Read this guide first.

Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.

KOR ἦ⳪#⇢#☎Ὧ☆Ṧ#Ⱨ⪞#ⷦ⟗⟆⬎1

⁃#⭧㟓⪏#⏷⧴㢣ᅻ#⭏⤛#⑯󰵱⑧᳇#⫈⣿#ⱇ☸☧⥯1

# # ⁃#⑯󰵱⑧᳇#ᘯ#⫈⪋#㨏#Ꮳⱜ⤛#⾃ါ㢫#╣#⫓ᜏᮨ#⢓⭏㢧#ှ⤛#‿။㢣☸☧⥯1

THA อ่านคู่มือฉบับนี้ก่อน

โปรดอ่านคู่มือฉบับนี้ก่อนใช้ผลิตภัณฑ์

หลังจากที่อ่านคู่มือจบแล้ว ให้เก็บไว้ในที่ปลอดภัยเพื่อการอ้างอิงในภายหน้า

VIE Đọc sổ tay hướng dẫn này trước tiên.
Hãy đọc sổ tay hướng dẫn này trước khi vận hành sản phẩm này.
Sau khi bạn đọc xong sổ tay hướng dẫn này, hãy cất nó ở một nơi an toàn để tham

khảo về sau.

Before installing the printer, read the cautions carefully which are described below.

KOR 㡏᳻㑻᳇#⑯ㆣ㢣ᅻ#⭏⤛#⢏󰪄⤛#⑯󰵱ᝧ#ⱇ⪣⏷㢸⪏#⫣#⫈⣿#ⱇ☸☧⥯1
THA ก่อนการติดตั้งเครื่องพิมพ์ โปรดอ่านข้อควรระวังซึ่งอธิบายไว้ด้านล่างนี้ให้ละเอียด

VIE Trước khi cài đặt máy in, hãy đọc cẩn thận những thận trọng được mô tả bên dưới.

RT5-0685 (000) XXXXXXXXXX © CANON INC. 2011 PRINTED IN CHINA

Important Safety Instructions

This manual describes only warnings and cautions for the installation and the power
supply. Be sure to read "Important Safety Instructions" described in the e-Manual (HTML
manual) included in the supplied CD-ROM also.

Installation

- Do not install the printer in a location near alcohol, paint thinner,
or other flammable substances. If flammable substances come
into contact with electrical parts inside the printer, this may result
in a fire or electrical shock.

- Do not place the following items on the printer.

- Necklaces and other metal objects

- Cups, vases, flowerpots, and other containers filled with water

or liquids
If these items come into contact with a high-voltage area inside
the printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer,
immediately turn OFF the power switch (1) and disconnect the
interface cables if they are connected (2). Then, unplug the
power plug from the AC power outlet (3) and contact your local
authorized Canon dealer.

- Do not install the printer in unstable locations, such as on
unsteady platforms or inclined floors, or in locations subject to
excessive vibrations, as this may cause the printer to fall or tip
over, resulting in personal injury.

- The ventilation slots are provided for proper ventilation of
working parts inside the printer. Never place the printer on a soft
surface, such as a bed, sofa, or rug. Blocking the slots can cause
the printer to overheat, resulting in a fire.

- Do not install the printer in the following locations, as this may
result in a fire or electrical shock.

- A damp or dusty location

- A location exposed to smoke and steam, such as near a

cookery or humidifier

- A location exposed to rain or snow

- A location near a water faucet or water

- A location exposed to direct sunlight

- A location subject to high temperatures

- A location near open flames

- When installing the printer, gently lower the printer to the
installation site so as not to catch your hands between the printer
and the floor or between the printer and other equipment, as this
may result in personal injury.

- When connecting the interface cable, connect it properly by
following the instructions in the e-Manual. If not connected
properly, this may result in malfunction or electrical shock.

- When moving the printer, follow the instructions in the e-Manual
to hold it correctly. Failure to do so may cause you to drop the
printer, resulting in personal injury.

Indicates a warning concerning operations that
may lead to death or injury to persons if not
performed correctly. To use the machine safely,
always pay attention to these warnings.

Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.

Power Supply

- Do not damage or modify the power cord. Also, do not place
heavy objects on the power cord or pull on or excessively bend it,

as this can cause electrical damage, resulting in fire or electrical
shock.

- Keep the power cord away from all heat sources. Failure to do so
can cause the power cord insulation to melt, resulting in a fire or
electrical shock.

- The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.

- The power cord may become damaged if it is stepped on, fixed
with staples, or if heavy objects are placed on it. Continued use
of a damaged power cord can lead to an accident, such as a fire
or electrical shock.

- Do not plug or unplug the power plug with wet hands, as this can
result in electrical shock.

- Do not plug the power cord into a multi-plug power strip, as this
can result in a fire or electrical shock.

- Do not bundle up or tie up the power cord in a knot, as this can
result in a fire or electrical shock.

- Insert the power plug completely into the AC power outlet. Failure
to do so can result in a fire or electrical shock.

- If excessive stress is applied to the connection part of the power
cord, it may damage the power cord or the wires inside the
machine may disconnect. This could result in a fire. Avoid the
following situations:

- Connecting and disconnecting the power cord frequently.

- Tripping over the power cord.

- The power cord is bent near the connection part, and

continuous stress is being applied to the power outlet or the
connection part.

- Applying a shock to the power connector.

- Do not use power cords other than the one provided, as this can
result in a fire or electrical shock.

- As a general rule, do not use extension cords. Using an
extension cord may result in a fire or electrical shock.

- Do not use a power supply voltage other than that listed herein,
as this may result in a fire or electrical shock.

- Always grasp the power plug when unplugging the power plug.
Do not pull on the power cord, as this may expose the core wire
of the power cord or damage the cord insulation, causing
electricity to leak, resulting in a fire or electrical shock.

- Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug,
you may be unable to unplug it in an emergency.

User Software

Symbols

English

To avoid the risk of personal injury or damage to the printer,
and for legal information, make sure to read the "Legal
Notices" and "Important Safety Instructions" in the
e-Manual included on the accompanying CD-ROM
carefully before using the printer.

User Software

ภาษาไทย Tiếng Việt

คำเตือน

เพื่อป้องกันความเสี่ยงต่อการบาดเจ็บทางร่างกายหรือ
ความเสียหาย ต่อเครื่องพิมพ์ตลอดจนดูข้อมูลทางด้านกฎหมาย

ขอให้อ่าน "ข้อความทางกฎหมาย" และ "คำแนะนำด้าน
ความปลอดภัยที่สำคัญ" ในคู่มือแบบอิเล็กที่รวมอยู่ในแผ่น
CD-ROM ที่ให้มานี้อย่างระมัดระวังก่อนใช้เครื่องพิมพ์

ซอฟต์แวร์สำหรับผู้ใช้ Phần mềm dành cho người dùng

㩆቗⪞

ᆧᇊ

⫃⭌#⃋␌#ᥛᗟ#㡏᳻㑻⪣#ⓛ␌⪏#㢇㢣ᅻ#⩏㢿⑧/#ᅃ᳷ါ#ῠ⭌#⭠‿⤛#
။㢿⑧ᗟ#㡏᳻㑻#⏷⧴#⭏⤛#⃋ⓘᝧ#FG0URP⤛#㜷㢳ᝧ#
⭏⫛⑯󰵱⑧⪣#世ῠ⭌#ါⴋ#⏷㢸丗#὚#世ⱇ⧟#⢓⭏#ⴋㆳ丗⪏#⫣#⫈⣿#
ⱇ☸☧⥯1

⏷⧴⫛#ⓗ㡏㘃⨳⣿

CẢNH BÁO

Để tránh rủi ro về thương tích cá nhân hoặc hư hỏng máy
in, và để biết thông tin pháp lý, đảm bảo đọc "Các Lưu Ý
Về Luật Pháp" và "Các Chỉ dẫn An toàn Quan trọng” trong
Hướng dẫn sử dụng điện tử có trong CD-ROM đi kèm một
cách cẩn thận trước khi sử dụng máy in.

Confirm the supplied accessories.

1

KOR ⃋ⓘᝧ#⢬⒃⑧᳷᳇#㦠⫃㢿#ⱇ☸☧⥯1

Remove all the tape.

KOR 󰶔ᠫ#㒗⪿㡏᳇#⭧ྻ㢴ᘓᘯ1

THA ดึงเทปออกทั้งหมด

THA ตรวจดูอุปกรณ์เสริมที่ให้มา

A B

D E

VIE Tháo dải băng.

VIE Xác nhận các phụ kiện đi kèm.

C

Load paper.

4

⧴ⴋ᳇#ᑮ☀ᘓᘯ1

KOR

1 2 3 4

THA ใส่กระดาษ

VIE Nạp giấy.

B

5 6

C

Connect the printer and computer.

5

㡏᳻㑻⦋#㈿㠳㑻᳇#⤻࿻㢴ᘓᘯ1

KOR

THA เชื่อมต่อเครื่องพิมพ์เข้ากับคอมพิวเตอร์

VIE Kết nối máy in và máy tính.

Remove all the orange tape attached to the printer when performing the following procedure.

The packing materials may be changed in form or placement, or may be added or removed without notice.

៎ⰶ#ⳲㄒṦ#⟎㩳㩊#ᨶ⪺᝾#㧮ẚ㘚⪺#≪ㄓᤆ#ᾒ᧊#⬎ᳶ⺪△#㘶ⱞ㧮Ṧ#ⴆᅚ㩞#ⷦ⟗⟆⬎1

KOR
㜷⫰⫷ᗟ#㥠㐧ཋ#󰾬ဈᝣྻᏣ#ႛ⿿ᝣྻᏣ/#ᥛᗟ#⏷⭏#၀ⴋ⤑⪿#ミཋ#ᥛᗟ#⭧ྻᝫ#╣#⫓☀ᘓᘯ1

THA ดึงเทปสีส้มที่ติดอยู่กับเครื่องพิมพ์ออกขณะที่ปฏิบัติตามขั้นตอนดังต่อไปนี้
วัสดุหีบห่ออาจมีรูปแบบหรือตำแหน่งจัดวางเปลี่ยนแปลงไป ไม่ก็อาจมีการเพิ่มเติมหรือเอาออกได้โดยไม่ต้องแจ้งให้ทราบ

VIE Tháo toàn bộ dải băng màu cam dính trên máy in khi thực hiện quy trình sau đây.
Vật liệu đóng gói có thể được thay đổi hình thức hoặc vị trí hay được thêm hoặc bỏ đi mà không báo trước.

Remove the packing materials.

2

KOR 㜷⫰⫷᳇#⭧ྻ㢿#ⱇ☸☧⥯1

4

THA นำวัสดุหีบห่อออก

5

VIE Gỡ bỏ vật liệu đóng gói.

321

1 2 3 4

OFF

Install the driver.

6

ᠧ󰩨⪿῏᳇#⑯ㆣ㢴ᘓᘯ1

KOR

1 2 3

THA ติดตั้งไดรเวอร์

VIE Cài đặt trình điều khiển.

D

E

* English sample

Follow the instructions on the screen.

㦟ᶿ⪣#ⴋ☧⤛#᡻᳐ᘓᘯ1

KOR

THA ปฏิบัติตามคำแนะนำบนหน้าจอ

VIE Làm theo hướng dẫn trên màn hình.

Check!

Did you remove all the packing materials?

󰶔ᠫ#㜷⫰⫷᳇#⭧ྻ㣓☀ᘓᆗB

KOR

THA คุณได้นำวัสดุหีบห่อออกทั้งหมดหรือไม่?
VIE Bạn đã gỡ bỏ tất cả vật liệu đóng gói chưa?

Make sure that all the orange tape
is completely removed.

KOR 󰶔ᠫ#⥯᭗ⴋ␔#㒗⪿㡏ᗟ#ὣᠧ☧#⦏⭏㫓#

⭧ྻ㢿#ⱇ☸☧⥯1

THA ตรวจสอบให้แน่ใจว่าดึงเทปสีส้มออก

จนหมดแล้ว

VIE Đảm bảo toàn bộ dải băng màu

cam đã được tháo hoàn toàn.

Restart your computer.

KOR ㈿㠳㑻᳇#⫷ᅻᜤ㢴ᘓᘯ1
THA เริ่มคอมพิวเตอร์ใหม่
VIE Khởi động lại máy tính.

Check the operation.

7

⫝̸ᜤ⪏#㦠⫃㢴ᘓᘯ1

KOR

THA ตรวจสอบการทำงาน

21 3

VIE Kiểm tra vận hành.

Connect the power cord.

3

KOR ⭏⨛#㊟ᠧ᳇#⤻࿻㢴ᘓᘯ1

1 2

A

Close the covers after you finish checking.

㦠⫃⪿#ᎨᏣᶿ#㈯῏᳇#ᘶ⢏#ⱇ☸☧⥯1

KOR
THA ปิดฝาครอบหลังจากที่คุณตรวจสอบเสร็จแล้ว
VIE Đóng nắp sau khi bạn kiểm tra xong.

THA เสียบสายไฟ

VIE Kết nối dây nguồn.

Next, see the e-Manual.

8

KOR ᘯ⪗⪇ᮧ#⭏⫛⑯󰵱⑧᳇#⾃⮻㢿#

ⱇ☸☧⥯1

Setup finished.

KOR ⑯ㆣཋ#⦏ᰗᝣ⤓☀ᘓᘯ1
THA การตั้งค่าเสร็จสิ้น
VIE Cài đặt hoàn tất.

THA ขั้นต่อไป โปรดดูคู่มือแบบอิเล็ก

VIE Tiếp theo, xem Hướng dẫn sử

dụng điện tử.