Canon imageCLASS LBP6780x Quick Setup Manual
D
E
F
B
A
C
A
B
F
OFF
2
Remove the packing materials.
SPA Retire los materiales de embalaje. KOR 㜷⫰⫷᳇#⭧ྻ㢿#ⱇ☸☧⥯1
Check!
Did you remove all the packing materials?
Make sure that all the orange tape is completely removed.
SPA Asegúrese de retirar completamente la totalidad de la cinta naranja.
KOR ᠫ#⥯᭗ⴋ␔#㒗⪿㡏ᗟ#ὣᠧ☧#⦏⭏㫓#⭧ྻ㢿#ⱇ☸☧⥯1
5
Connect the power cord.
SPA Conecte el cable de alimentación. KOR ⭏⨛#㊟ᠧ᳇#⤻㢴ᘓᘯ1
Quick Setup Guide
SPA Guía de instalación rápida
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
SPA Lea esta guía primero.
Por favor, lea esta guía antes de usar este producto.
Después de leer esta guía, guárdela en un lugar seguro
para posteriores consultas.
Read the "Important Safety Instructions" section on the back side of this
Setup Guide carefully to install the printer safely.
SPA Para instalar la impresora de modo seguro, lea
atentamente la sección "Instrucciones de seguridad
importantes" en el reverso de esta Guía de
configuración.
KOR ཏ㜃#⑯ㆣ#⢓⑧
# # ⁃#⭧㟓⪏#⏷⧴㢣ᅻ#⭏⤛#⑯⑧᳇#⫈⣿#ⱇ☸☧⥯1
# # ⁃#⑯⑧᳇#ᘯ#⫈⪋#㨏#Ꮳⱜ⤛#⾃ါ㢫#╣#⫓ᜏᮨ#⢓⭏㢧#ှ⤛#
KOR 㡏㑻᳇#⢓⭏㢣࿗#⑯ㆣ㢣ᅻ#⩏㢿⑧#⁃#⑯ㆣ#⑯⑧#᠂ᶿ⪣#
ἦ⳪#⇢#☎Ὧ☆Ṧ#Ⱨ⪞#ⷦ⟗⟆⬎1
KOR
‿။㢣☸☧⥯1
%ⱇ⧟#⢓⭏#ⴋㆳ%⪏#⫣#⫈⣿#ⱇ☧ᅻ#Ὗᘓᘯ1
SPA ¿Ha retirado todos los materiales de
KOR ᠫ#㜷⫰⫷᳇#⭧ྻ㣓☀ᘓᆗB
3
embalaje?
Move the printer.
SPA Desplace la impresora. KOR 㡏㑻᳇#⪿ᜤ☧㐀ᘓᘯ1
Close the covers after you finish checking.
SPA Cierre las tapas una vez finalizada la comprobación.
KOR 㦠⫃⪿#ᎨᏣᶿ#㈯῏᳇#ᘶ⢏#ⱇ☸☧⥯1
6
USB
Connect the printer and computer.
SPA Conecte la impresora y el ordenador. KOR 㡏㑻⦋#㈿㠳㑻᳇#⤻㢴ᘓᘯ1
1
Remove all the tape.
SPA Retire la totalidad de la cinta.
KOR ᠫ#㒗⪿㡏᳇#⭧ྻ㢴ᘓᘯ1
Confirm the supplied accessories.
SPA Verifique los accesorios suministrados. KOR ⓘᝧ#⢬⒃⑧᳷᳇#㦠⫃㢿#ⱇ☸☧⥯1
User Software CD-ROM
Remove all the orange tape attached to the printer when performing the following
procedure.
The packing materials may be changed in form or placement, or may be added or removed
without notice.
SPA Retire la totalidad de la cinta naranja acoplada a la impresora cuando lleve a cabo
el siguiente procedimiento.
Los materiales de embalaje pueden diferir en su forma o posición y pueden
añadirse o eliminarse sin previo aviso.
KOR ᘯ⪗#⭓⽳᳇#☯㣔㢫#ᢗ⤛ᗟ#㡏㑻⤛#⽴ᝧ#ᠫ#⥯᭗ⴋ␔#㒗⪿㡏᳇#⭧ྻ㢿#ⱇ☸☧⥯1
㜷⫰⫷ᗟ#㥠㐧ཋ#ဈᝣྻᏣ#ႛ⿿ᝣྻᏣ/#ᥛᗟ#⏷⭏#၀ⴋ⤑⪿#ミཋ#ᥛᗟ#⭧ྻᝫ#╣#⫓☀ᘓᘯ1
ENG SPA KOR
PS User Software CD-ROM
User Manual CD-ROM
ENG SPA KOR
e-Manual
4
Load paper.
SPA Cargue papel.
Hook
KOR ⧴ⴋ᳇#ᑮ☀ᘓᘯ1
Hook
OFF
LAN
FT6-0157 (000) XXXXXXXXXX © CANON INC. 2012 PRINTED IN VIETNAM
Up to here
C
D
E
E
ON
LAN
8
Register the paper size.
SPA Registre el tamaño de papel.
Consulte el e-Manual.
See the e-Manual.
KOR 㟝㫴G䆠ὤ⪰G☥⦑䚝⏼␘U
GG
㤸㣄㉘⮹㉐⪰G㵬㦤䚌㐡㐐㝘U
Important Safety Instructions
This manual describes only warnings and cautions for the installation and the power
supply. Be sure to read "Important Safety Instructions" described in the e-Manual
(HTML manual) included in the supplied User Manual CD-ROM also.
User Manual CD-ROM
Configure the network settings, if necessary.
SPA
Consulte el e-Manual.
Si es preciso, configure los ajustes
de red.
KOR 䙸㟈㐐G≘䏬㠀䆠G㉘㥉㡸GẠ㉥䚌㐡㐐㝘U
7
Install the driver.
SPA Instale el controlador. KOR ☐⢰㢨ⶸ⪰G㉘㾌䚝⏼␘U
or
If you have any questions about operations, see the "Printer Driver Installation Guide."
SPA Si tiene preguntas sobre las operaciones, consulte la "Guía de instalación del controlador de impresora".
KOR 㦤㣅㜄GḴ䚨GẵἼ䚐G㥄㢨G㢼㡰㐐⮨GI䘸⫤䉤G☐⢰㢨ⶸG㉘㾌G㉘⮹㉐I⪰G㵬㦤䚌㐡㐐㝘U
See the e-Manual.
㤸㣄㉘⮹㉐⪰G㵬㦤䚌㐡㐐㝘U
1
* English sample
2
ON
Follow the instructions on the screen.
SPA Siga las instrucciones de la pantalla.
KOR 䞈⮨㢌G㫴㐐㜄G♤⪹⏼␘U
9
10
1
* English sample
2
Check the printing operation.
SPA
Compruebe el funcionamiento de la impresión.
KOR 㢬㋸G㣅┍G䞉㢬䚌ὤU
Setup is finished.
SPA
La instalación ha finalizado.
KOR ㉘㾌ᴴG㝸⨀╌㛼㏩⏼␘U
For more about using the printer, see the e-Manual.
SPA
Para obtener más información sobre el uso
de la impresora, consulte el e-Manual.
KOR 䘸⫤䉤G㇠㟝㜄G䚐G⒈G㣄㉬䚐G㇠䚡㡴G㤸㣄㉘⮹㉐⪰G
㵬㦤䚨G㨰㐡㐐㝘U
Installation
- Do not install the printer in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with
electrical parts inside the printer, this may result in a fire or electrical
shock.
- Do not place the following items on the printer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or
liquids
If these items come into contact with a high-voltage area inside the
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn
OFF the power switch (1) and disconnect the interface cables if they are
connected (2). Then, unplug the power plug from the AC power outlet (3)
and contact your local authorized Canon dealer.
(2)
(1)
(1)
- When installing or removing the optional accessories, be sure to turn the
printer OFF, unplug the power plug, and then disconnect all the interface
cables and power cord from the printer. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical shock.
- Do not install the printer in unstable locations, such as on unsteady
platforms or inclined floors, or in locations subject to excessive
vibrations, as this may cause the printer to fall or tip over, resulting in
personal injury.
- The ventilation slots are provided for proper ventilation of working parts
inside the printer. Never place the printer on a soft surface, such as a
bed, sofa, or rug. Blocking the slots can cause the printer to overheat,
resulting in a fire.
- Do not install the printer in the following locations, as this may result in a
fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or
humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- When installing the printer, gently lower the printer to the installation site
so as not to catch your hands between the printer and the floor or
between the printer and other equipment, as this may result in personal
injury.
- When connecting the interface cable, connect it properly by following the
instructions in the e-Manual. If not connected properly, this may result in
malfunction or electrical shock.
- Be careful when handling the main board or the ROM. Touching the main
board or the sharp parts such as the edges of the ROM may result in
personal injury.
- When moving the printer, follow the instructions in the e-Manual to hold it
correctly. Failure to do so may cause you to drop the printer, resulting in
personal injury.
(2)
(3)
Symbols
Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use the
machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury
to persons if not performed correctly. To use the machine safely,
always pay attention to these cautions.
Power Supply
- Do not damage or modify the power cord. Also, do not place heavy
objects on the power cord or pull on or excessively bend it, as this can
cause electrical damage, resulting in fire or electrical shock.
- Keep the power cord away from all heat sources. Failure to do so can
cause the power cord insulation to melt, resulting in a fire or electrical
shock.
- The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.
- The power cord may become damaged if it is stepped on, fixed with
staples, or if heavy objects are placed on it. Continued use of a
damaged power cord can lead to an accident, such as a fire or electrical
shock.
- Do not plug or unplug the power plug with wet hands, as this can result
in electrical shock.
- Do not plug the power cord into a multi-plug power strip, as this can
result in a fire or electrical shock.
- Do not bundle up or tie up the power cord in a knot, as this can result in
a fire or electrical shock.
- Insert the power plug completely in the AC power outlet. Failure to do
so can result in a fire or electrical shock.
- If excessive stress is applied to the connection part of the power cord, it
may damage the power cord or the wires inside the machine may
disconnect. This could result in a fire. Avoid the following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and continuous stress
is being applied to the power outlet or the connection part.
- Applying a shock to the power connector.
- Do not use power cords other than the one provided, as this can result in
a fire or electrical shock.
- As a general rule, do not use extension cords. Using an extension cord
may result in a fire or electrical shock.
- Do not use a power supply voltage other than that listed herein, as this
may result in a fire or electrical shock.
- Always grasp the power plug when unplugging the power plug. Do not
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
- Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
English
WARNING
To avoid the risk of personal injury or damage to the
printer, and for legal information, make sure to read the
"Legal Notices" and "Important Safety Instructions" in the
e-Manual included on the accompanying User Manual
CD-ROM carefully before using the printer.
User Manual CD-ROM
䚐ạ㛨
Ḕ
㢬㤵G⺴ㇵG❄⏈G䘸⫤䉤㢌G㋄ㇵ㡸G䙰䚌ὤG㠸䚨㉐SGἬ⫠ḔGⷉ㤵G
㥉⸨㜄GḴ䚨㉐⏈G䘸⫤䉤G㇠㟝G㤸㜄G⺴㋁═G|GtG
jkTyvt㜄G䔠䚜═G㤸㣄㉘⮹㉐㢌Gˈⷉ㤵GḔ㫴G㇠䚡ˉGⵃGˈ㨰㟈G
㙼㤸G㫴㾜ˉ㡸G㣌G㢱㛨G㨰㐡㐐㝘U
User Manual CD-ROM
Español
ADVERTENCIA
Para evitar el riesgo de sufrir lesiones personales o de causar
daños a la impresora (y para información legal), asegúrese de
leer atentamente los "Avisos legales" y las "Instrucciones de
seguridad importantes" del e-Manual incluido en el disco User
Manual CD-ROM suministrado antes de utilizar la impresora.
User Manual CD-ROM
Loading...