Canon imageCLASS LBP112 User Manual

imageCLASS
LBP112
User
s Guide
'
USRMA-2578-00 2018-07 en Copyright CANON INC. 2018

Contents

Important Safety Instructions ...........................................................................................................
Installation ............................................................................................................................................................... 3
Power Supply ............................................................................................................................................................ 5
Handling ................................................................................................................................................................... 6
Maintenance and Inspections .................................................................................................................................... 8
Consumables ............................................................................................................................................................ 9
Setting Up .......................................................................................................................................................... 13
Preparations Required Before Use ........................................................................................................................... 14
Installing Drivers .................................................................................................................................................... 15
Setting Up Print Server ............................................................................................................................................ 16
Basic Operations .......................................................................................................................................... 20
Parts and Their Functions ........................................................................................................................................ 22
Front Side .......................................................................................................................................................... 23
Back Side ........................................................................................................................................................... 25
Drawer .............................................................................................................................................................. 26
Printer Status Window ............................................................................................................................................ 27
Turning ON the Machine ......................................................................................................................................... 30
Turning OFF the Machine ..................................................................................................................................... 31
Loading Paper ......................................................................................................................................................... 32
Loading Paper in the Drawer ................................................................................................................................ 34
Loading Envelopes .............................................................................................................................................. 37
Loading Preprinted Paper .................................................................................................................................... 39
Entering Sleep Mode ............................................................................................................................................... 40
Printing ................................................................................................................................................................ 42
Printing from a Computer ....................................................................................................................................... 43
Canceling Prints ................................................................................................................................................. 45
Checking the Printing Status ................................................................................................................................ 48
Managing the Machine ........................................................................................................................... 50
Updating the Firmware ........................................................................................................................................... 51
Maintenance ................................................................................................................................................... 53
Regular Cleaning ..................................................................................................................................................... 55
Cleaning the Exterior ........................................................................................................................................... 56
Cleaning the Fixing Assembly ............................................................................................................................... 57
Replacing the Toner Cartridge ................................................................................................................................. 58
Replacing the Drum Cartridge ................................................................................................................................. 63
I
Checking the Remaining Amount of Consumables ....................................................................................................
Relocating the Machine ........................................................................................................................................... 70
Viewing the Counter Value ...................................................................................................................................... 72
Printing Lists of Settings ......................................................................................................................................... 73
Consumables .......................................................................................................................................................... 74
68
Troubleshooting ........................................................................................................................................... 78
Common Problems .................................................................................................................................................. 80
Installation/Settings Problems .............................................................................................................................. 81
Printing Problems ............................................................................................................................................... 82
When You Cannot Print Properly .............................................................................................................................. 84
Printing Results Are Not Satisfactory ..................................................................................................................... 86
Paper Creases or Curls ........................................................................................................................................ 95
Paper Is Fed Incorrectly ....................................................................................................................................... 97
Countermeasures for Each Message ......................................................................................................................... 98
Clearing Paper Jams .............................................................................................................................................. 104
Paper Jams inside the Machine ........................................................................................................................... 106
When a Problem Cannot Be Solved ......................................................................................................................... 111
Appendix ........................................................................................................................................................... 113
Third Party Software ............................................................................................................................................. 114
Feature Highlights ................................................................................................................................................ 115
Going Green and Saving Money ......................................................................................................................... 116
Improving Eciency ......................................................................................................................................... 117
Specications ....................................................................................................................................................... 118
Main Unit ........................................................................................................................................................ 119
Available Paper ................................................................................................................................................ 121
Printer Functions .............................................................................................................................................. 123
System Environment ......................................................................................................................................... 124
Manuals and Their Contents .................................................................................................................................. 125
Using User's Guide ................................................................................................................................................ 126
Screen Layout of User's Guide ............................................................................................................................ 127
Viewing User's Guide ........................................................................................................................................ 130
Basic Windows Operations .................................................................................................................................... 131
Notice .................................................................................................................................................................. 139
II
Important Safety Instructions
Important Safety Instructions
Important Safety Instructions ................................................................................................................... 2
Installation ............................................................................................................................................................
Power Supply ......................................................................................................................................................... 5
Handling ................................................................................................................................................................. 6
Maintenance and Inspections .............................................................................................................................. 8
Consumables .......................................................................................................................................................... 9
3

Important Safety Instructions

Important Safety Instructions
2AL7-000
The content described in this chapter is for the pre and others. Before using this machine, read this chapter and follow the instructions to properly use this machine. Do not perform any operations not described in this manual. Canon will not be responsible for any damages resulting from use not described in this manual, improper use, or repair/changes not performed by Canon or a third party authorized by Canon.
Installation(P. 3) Power Supply(P. 5) Handling(P. 6) Maintenance and Inspections(P. 8) Consumables(P. 9)
vention of damage to property and injury to users of the machine

Installation

Important Safety Instructions
2AL7-001
To use this machine safely and comfortably appropriate location.
Do not install in a location that may result in a r
A location wher
(too close to walls, beds, sofas, rugs, or similar objects)
A damp or dusty location
A location exposed to direct sunlight or outdoors
A location subject to high temperatures
A location exposed to open ames
Near alcohol, paint thinners or other ammable substances
e the ventilation slots are blocked
, carefully read the following precautions and install the machine in an
e or electrical shock
Other warnings
Do not connect unapproved cables to this machine. Doing so may result in a re or electrical shock.
Do not place necklaces and other metal objects or containers lled with liquid on the machine. If foreign
substances come in contact with electrical parts inside the machine, it may result in a re or electrical shock.
If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer.
Do not install in the following locations
The machine may drop or fall, r
- An unstable location
- A location exposed to vibrations
esulting in injury.
Other cautions
When carrying this machine, follow the instructions in this manual. If carried impr
in injury.
When installing this machine, be careful not to get your hands caught between the machine and the oor or
walls. Doing so may result in injury.
operly, it may fall, resulting
Avoid poorly ventilated locations
This machine generates a slight amount of ozone and other emissions during normal use. These emissions
are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room
Important Safety Instructions
where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions fr
om the machine.
Do not install in the following locations that may result in damage
A location subject to dr
humidity
A location near equipment that generates magnetic or
electromagnetic waves
A laboratory or location where chemical reactions occur
A location exposed to corrosive or toxic gases
A location that may warp from the weight of the machine or
where the machine is liable to sink (a carpet, etc.)
amatic changes in temper
ature or
Do not install in a location where condensation occurs
Water dr
is heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let the machine adjust to the ambient temperature and humidity for at least 2 hours before use.
oplets (condensation) may form inside the machine when the room where the machine is installed
In altitudes of above sea level 3,000 m or higher
Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 meters
above sea level, or higher.

Power Supply

Important Safety Instructions
2AL7-002
Use only a power supply that meets the specied voltage r
or electrical shock.
The machine must be connected to a socket-outlet with grounding connection by the provided power cord.
Do not use power cords other than the one provided, as this may result in a re or electrical shock.
The provided power cord is intended for use with this machine. Do not connect the power cord to other
devices.
Do not modify, pull, forcibly bend, or perform any other act that may damage the power cord. Do not place
heavy objects on the power cord. Damaging the power cord may result in a re or electrical shock.
Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock.
Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a re or
electrical shock.
Do not wrap the power cord or tie it in a knot, as this may result in a re or electrical shock.
Insert the power plug completely into the AC power outlet. Failure to do so may result in a re or electrical
shock.
Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may
result in a re, electrical shock, or damage to the machine.
equirements. Failure to do so may result in a re
Install this machine near the power outlet and leave sucient space ar
unplugged easily in an emergency.
ound the power plug so that it can be
When connecting power
Do not connect the power cor
damage to the machine at power failure.
If you plug this machine into an AC power outlet with multiple sockets, do not use the remaining sockets to
connect other devices.
Do not connect the power cord to the auxiliary AC power outlet on a computer.
d to an uninterruptible power source. Doing so may result in malfunction of or
Other precautions
Electrical noise may cause this machine to malfunction or lose data.

Handling

Important Safety Instructions
2AL7-003
Immediately unplug the power plug fr
and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a re or electrical shock.
Do not disassemble or modify this machine. There are high-
voltage and high-temperature components inside the machine which may result in a re or electrical shock.
Place the machine where childr
and electrical parts. Failure to do so may result in unexpected accidents.
Do not use ammable sprays near this machine. If ammable substances come into contact with electrical
parts inside this machine, it may result in a re or electrical shock.
When moving this machine, be sure to turn OFF the power of this machine and your computer, and then
unplug the power plug and interface cables. Failure to do so may damage the power cord or interface cables, resulting in a re or electrical shock.
When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not
touch the metal part of the connector, as this may result in an electrical shock.
om the AC power outlet
en will not come in contact with the power cord and other cables or internal
If you are using a cardiac pacemaker
This machine generates a lo
feel abnormalities, please move away from this machine and consult your physician immediately.
Do not place heavy objects on this machine as they may fall, r
For your safety, please unplug the power cord if the machine will not be used for a long period of time.
Use caution when opening and closing covers to avoid injury to your hands.
Keep hands and clothing away from the rollers in the output area. If the rollers catch your hands or clothing,
this may result in personal injury.
The inside of the machine and the output slot are very hot during and immediately after use. Avoid contact
with these areas to prevent burns. Also, printed paper may be hot immediately after being output, so use caution when handling it. Failure to do so may result in burns.
w level magnetic ux and ultrasonic waves. If you use a cardiac pacemaker and
esulting in injury.
Important Safety Instructions
Laser beam
If the laser beam should escape and enter your eyes, e
xposure may cause damage to your eyes.
When transporting the machine
To pr
event damage to the machine during transport, perform the following.
- Remove the toner cartridges and the drum cartridges.
- Securely pack the machine in the original box with packing materials.
If the operating noise concerns you
Depending on the use environment and operating mode, if the operating noise is of concern, it is
recommended that the machine be installed in a place other than the oce.
Other precautions
Follow the caution instructions on labels and the like found on this machine.
Avoid shaking or applying shock to this machine.
Do not forcibly open and close doors, covers, and other parts. Doing so may result in damage to the
machine.
Do not touch the contacts (
) inside the machine. Doing so may result in damage to the machine.
T
o prevent a paper jam, do not turn OFF the power, open/close the covers, and load/unload the paper when
printing.
Important Safety Instructions

Maintenance and Inspections

2AL7-004
Clean this machine periodically. If dust accumulates, the machine may not oper observe the following. If a problem occurs during operation, see be r
esolved or you feel the machine requires an inspection, see
Before cleaning, turn OFF the power and unplug the power plug from the AC power outlet. Failure to do so
may r
esult in a re or electrical shock.
Unplug the power plug periodically and clean with a dry cloth to remove dust and grime. Accumulated dust
may absorb humidity in the air and may result in a re if it comes into contact with electricity.
Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only. Do not use
alcohol, benzine, paint thinner, or other ammable substances. Do not use tissue paper or paper towels. If these substances come into contact with electrical parts inside the machine, they may generate static electricity or result in a re or electrical shock.
Check the power cord and plug periodically for damage. Check the machine for rust, dents, scratches,
cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a re or electrical shock.
Troubleshooting(P. 78) . If the problem cannot
When a Problem Cannot Be Solved(P. 111) .
ate properly. When cleaning, be sure to
The inside of the machine has high-temperatur
may result in burns. Do not touch any part of the machine that is not indicated in the manual.
When loading paper or removing jammed paper, be careful not to cut your hands with the edges of the
paper.
When removing jammed paper or replacing toner cartridges or the like, be careful not to get any toner on
your hands or clothing. If toner gets on your hands or clothing, wash them immediately with cold water.
e and high-voltage components. Touching these components

Consumables

Important Safety Instructions
2AL7-005
Do not dispose of used toner cartridges or the like in open ames. Also, do not stor
cartridges, or paper in a location exposed to open ames. This may cause the toner to ignite, and result in burns or re.
If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a
soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.
e toner cartridges, drum
If you are using a cardiac pacemaker
The toner cartridge generates a low level magnetic ux. If you are using a cardiac pacemaker and feel
abnormalities, please move away from the toner cartridge and consult your physician immediately.
Use caution not to inhale any toner. If you should inhale toner, consult a physician immediately.
Use caution so that toner does not get into your e
immediately wash with cold water and consult a physician.
Use caution so that toner does not come into contact with your skin. If it should, wash with soap and cold
water. If there is any irritation on your skin, consult a physician immediately.
yes or mouth. If toner should get into your eyes or mouth,
Keep the toner cartridges and other consumables out of the reach of small children. If toner is ingested,
consult a physician or poison control center immediately.
Do not disassemble or modify the toner cartridge or the like. Doing so may cause the toner to scatter.
Handling the toner cartridge
Be sure to hold the toner cartridge using the handle.
Do not touch the toner feed section ( ), the electrical contacts ( ) or the toner cartridge memory ( ).
Important Safety Instructions
Except when necessary, do not take out the toner cartridge from the packing material or from this machine.
The toner cartridge is a magnetic pr
including oppy disks and disk drives. Doing so may result in data corruption.
oduct. Do not move it close to products susceptible to magnetism
Handling the drum cartridge
Be sure to hold the drum cartridge using the handle.
To avoid scratching the surface of the drum inside the machine or exposing it to light, do not open the drum
pr
otective shutter (
). Do not touch the electrical contacts ( ) or the drum cartridge memory ( ).
Except when necessary, do not take out the drum cartridge from the packing material or from this machine.
Storing the toner cartridge or the drum cartridge
Stor
e in the following environment to ensure safe and satisfactory use.
Storage temperature range: 0 to 35°C
Storage humidity range: 35 to 85% RH (relative humidity/no condensation)
Store without opening until the toner cartridge or the drum cartridge is to be used.
When removing the toner cartridge or the drum cartridge from this machine for storage, place the removed
toner cartridge or drum cartridge in the original packing material.
When storing the toner cartridge, do not store it upright or upside down. The toner will solidify and may not
return to its original condition even if it is shaken.
10
*
Important Safety Instructions
*
Even within the storable humidity r cartridge if there is a difference of temperature inside and outside the toner cartridge or the drum cartridge. Condensation will adversely affect the print quality of toner cartridges or drum cartridges.
ange, water droplets (condensation) may develop inside the toner cartridge or the drum
Do not store the toner cartridge or the drum cartridge in the following locations
Locations exposed to open ames
Locations exposed to direct sunlight or bright light for ve minutes or more
Locations exposed to excessive salty air
Locations where there are corrosive gases (i.e. aerosol sprays and ammonia)
Locations subject to high temperature and high humidity
Locations subject to dramatic changes in temperature and humidity where condensation may easily occur
Locations with a large amount of dust
Locations within the reach of children
Be careful of counterfeit toner cartridges or drum cartridges
Please be aware that there are counterfeit Canon toner cartridges or Canon drum cartridges in the
marketplace. Use of counterfeit toner cartridge or drum cartridge may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner cartridge or drum cartridge. For more information, see canon.com/counterfeit.
Availability period of repairing parts, toner cartridges, drum cartridges and the like
The repairing parts, toner cartridges, drum cartridges and the like for the machine will be available for at
least seven (7) years after production of this machine model has been discontinued.
Packing materials for the toner cartridge and the drum cartridge
Save the packing materials for the toner cartridge and the drum cartridge. They are required when
transporting this machine.
The packing materials may be changed in form or placement, or may be added or removed without notice.
When disposing of a used toner cartridge, drum cartridge or the like
When discarding a toner cartridge, drum cartridge or the like, place it in the original packing material to
prevent toner from scattering from inside, and dispose of it in accordance with the applicable local regulations.
11
Setting Up
Setting Up
Setting Up ............................................................................................................................................................. 13
Pr
eparations Required Before Use ..................................................................................................................... 14
Installing Drivers ................................................................................................................................................. 15
Setting Up Print Server ....................................................................................................................................... 16
12

Setting Up

Setting Up
2AL7-006
Before using the functions of the machine, the envir the sequences of ow required to complete the setup, and then perform the actual settings.
Before Use(P
. 14)
onmental conditions must be set in advance. To begin with, check
Preparations Required
13
Setting Up

Preparations Required Before Use

2AL7-007
Set up the machine using the following step. For mor corresponding section.
Step 1 Installing Drivers(P. 15)
e information about this step, click on the link to go to the
14
Setting Up

Installing Drivers

Install the various drivers and associated software on your computer.
Mak
1
e the necessary preparation before proceeding with the installation.
2AL7-008
If the machine is supplied with a CD-ROM/DVD-ROM, insert the CD-ROM/D
computer.
You can download drivers and software you are going to use from the Canon website (http://
www.canon.com/).
When new versions of drivers and software become available, they will be uploaded to the Canon website.
ou can download them as necessary after checking their system requirements.
Y
Depending on your machine or environmental conditions, some functions may not be available.
Some of the drivers are not supported depending on the OS. For more information about the supported
status of the latest OS, see the Canon website.
Proceed with the installation.
2
For more information about the installation procedure, see the manuals for the drivers and software you are
going to use.
VD-ROM into the drive on the
15

Setting Up Print Server

Setting Up
2AL7-009
With a print server, you can reduce the load on the computer that you print fr possible to install the drivers on each computer over the network, which saves you the trouble of installing the drivers on each computer by using the provided CD-ROM/DVD-ROM. To set up a computer on the network as a print server, congure the settings for sharing the printer.
To perform the following procedure, log in to your computer with an administrator account.
ou may be unable to install drivers over the network depending on the operating system and the bit
Y
architecture (32-bit or 64-bit) of the print server and client computers.
When implementing a print server in a domain environment, consult your Network Administrator.
Open the printer folder.
1
Right-click the printer driver icon for this machine and click [Printer properties] or
2
[Pr
operties].
Click the [Sharing] tab, select [Shar
3
machine.
Displaying the Printer Folder(P. 131)
e this printer], and enter the share name of the
om. The print server also makes it
Click the [Change Sharing Options] button if displayed.
Install additional drivers as necessary.
4
This operation is r
architecture via the print server.
Click [Additional Drivers].
1
Select the check box for the bit architecture that other computers are running, and click [OK].
2
equired if you want to install the drivers in other computers running a different bit
16
Setting Up
Select additional drivers from the follo
Print server Select the check box for
32-bit operating systems [x64]
64-bit operating systems [x86] under [Processor]
If you do not know whether your Windo
Checking the Bit Architecture(P. 134) .
Insert the provided CD-ROM/DVD-ROM into the drive on the computer, click [Browse] to specify the folder
3
that contains the drivers, and then click [OK].
If the print server runs a 32-bit operating system, select [UFRII] [uk_eng] [x64] [Driver] folders
on the pro
If the print server runs a 64-bit operating system, select [UFRII]
folders on the pro
Follow the on-screen instructions to install additional drivers.
4
vided CD-ROM/DVD-ROM.
vided CD-ROM/DVD-ROM.
wing, according to the operating system of the print server.
ws operating system is a 32-bit or 64-bit version, see
[uk_eng] [32BIT] [Driver]
Click [OK].
5
Installing the Drivers on a Computer via the Print Server
1
2
3
LINKS
Locate the shared printer in the print server. Print Server(P. 132
Double-click the shared printer.
Follow the on-screen instructions to install the drivers.
)
17
Displaying Shared Printers in the
Printing from a Computer(P. 43)
Setting Up
18
Basic Operations
Basic Operations
Basic Operations ...............................................................................................................................................
Parts and Their Functions ................................................................................................................................... 22
Front Side ....................................................................................................................................................... 23
Back Side ........................................................................................................................................................ 25
Drawer ............................................................................................................................................................ 26
Printer Status Window ........................................................................................................................................ 27
Turning ON the Machine ..................................................................................................................................... 30
Turning OFF the Machine ............................................................................................................................... 31
Loading Paper ...................................................................................................................................................... 32
Loading Paper in the Drawer .......................................................................................................................... 34
Loading Envelopes .......................................................................................................................................... 37
Loading Preprinted Paper ............................................................................................................................... 39
Entering Sleep Mode ........................................................................................................................................... 40
20
19

Basic Operations

Basic Operations
2AL7-00A
This chapter describes the parts of the machine and basic operations, such as ho
w to load paper.
Parts and Their Functions
This section describes the names and functions of the exterior and interior parts of the machine.
Functions(P
. 22)
Printer Status Window
This section e settings.
xplains how to use the "Printer Status Window" utility to check the machine's status and make machine
Printer Status Window(P. 27)
Parts and Their
Turning ON the Machine
This section describes ho
w to turn the machine ON and OFF.
Loading Paper
This section describes how to load the paper into the dr
awer.
Turning ON the Machine(P. 30)
Loading Paper(P. 32)
Entering Sleep Mode
20
Basic Operations
Entering Sleep Mode
This section describes how to set the sleep mode. Entering Sleep Mode(P. 40)
21
Basic Operations

Parts and Their Functions

2AL7-00C
This section describes the parts of the machine (exterior, fr to describing the parts of the machine used for such basic operations as loading paper and replacing the toner cartridges, etc., this section also describes the functions of the keys and meaning of indications by indicators of the machine. Read this section for tips on how to use the machine properly.
Front Side(P. 23) Back Side(P. 25) Drawer(P. 26)
ont side and back side) and how they function. In addition
22

Front Side

Output cover
Basic Operations
2AL7-00E
Place the output cover whene
Do not place or drop heavy objects on the output cover.
ver you use the machine.
Output tray
Printed paper is output to the output tray.
Alarm indicator
Lights up or ashes when a paper jam or other error occurs. Solve the pr displayed in the Printer Status Window.
Countermeasures for Each Message(P. 98)
oblem following the message
Job indicator
Lights up when there is print data that is being printed or waiting to be printed. Flashes when a print job is canceled.
Cancel Job key
Cancels a print job that is currently printing. Canceling Prints(P. 45)
Paper indicator/key
Flashes when the machine is out of paper, when the paper is the wrong size, and after other err paper needs to be checked. Reset the paper and press the key to restart printing.
You can also use the Paper key to print a list of the machine's settings (with the machine ready to print, press the k
y and hold it down for 3 seconds).
e
Printing Lists of Settings(P. 73)
ors when the
Power indicator/switch
Press the power switch to turn the power ON or OFF. Indicator lights up when the power is turned ON.
23
Basic Operations
Lift handles
Hold the lift handles when carrying the machine. Relocating the Machine(P. 70)
Ventilation slots
Air from inside the machine is vented out to cool do on the ventilation slots prevents ventilation.
wn the inside of the machine. Note that placing objects
Toner cover
Open the toner co
Procedure for Replacing the Toner Cartridge(P. 60) Procedure for Replacing the Drum Cartridge(P. 65)
ver when r
eplacing toner cartridges or drum cartridges.
Paper stopper
Open the paper stopper when you want to pre
vent paper from falling out of the output tray.
Drawer
Load the paper to print in this tray. Loading Paper in the Drawer(P. 34)
24

Back Side

Rating label
The label shows the serial number, which is needed when making inquiries about the machine. When a Problem Cannot Be Solved
Basic Operations
2AL7-00F
(P. 111)
USB port
Connect a USB cable when connecting the machine and a computer.
Power socket
Connect the power cor
Anti-theft Security Slot
This machine is pro
security wire or equivalent.
The hole of the security slot is 4.4 mm wide and 8.3 mm high.
For inquiries about the security slot, contact your local authorized Canon
dealer.
d.
vided with a security slot, to which you can attach
25

Drawer

Paper cover
Remove this co
Basic Operations
2AL7-00H
ver to load paper in the drawer.
Paper guides
Adjust the paper guides to exactly the size of the loaded paper to ensur machine.
LINKS
Loading Paper in the Drawer(P. 34)
e that paper is fed straight into the
26

Printer Status Window

Basic Operations
2AL7-00J
The Printer Status Window is a utility that allo settings related to the machine, such as power saving settings. You can also use it for operations such as cancelling a print job or printing a list of the machine's settings. The Printer Status Window utility is installed on your computer when you install the printer driver.
Displaying the Printer Status Window(P. 27) Parts of the Screen and Their Functions(P. 27)
ws you to check the machine's status, view error information, and make
Displaying the Printer Status Window
Select the machine by clicking in the system tray.
Automatic Display of the Printer Status Window
The Printer Status Window is displayed automatically when an err
*
You can change the setting that determines when the Printer Status Window is displayed automatically. Change it with the [Options] menu details, see the Help. [Help] menu(P. 28)
If you are using Windo
Display the Printer Status Window after moving to the desktop.
[Preferences (Users)] or [Preferences (Administrators)] dialog box of the Printer Status Window. For
ws 8/Server 2012
or occurs during printing.
Parts of the Screen and Their Functions
This section pro with the controls and menus in this screen, see the Help.
vides an outline of the main screen. For detailed descriptions of the dialog boxes that can be displayed
[Help] menu(P. 28)
27
Loading...
+ 120 hidden pages