Canon EOS Utility Instruction Manual

Communication Software for the Camera

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M6M5M3

M10

M100

M50

1D X

XX

XX(WG)

XX(W)

EOS Utility

Ver. 3.8

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Instruction Manual

 Content of this Instruction Manual



EU stands for EOS Utility.



Camera model is displayed as an icon.
Example:EOS-1D X 
As for icon, it indicates all models EOS XX
(WG)/EOS XX (W)/EOS XX (N) respectively. When
any explanation is necessary for the specific model,
an icon such as is used.






displays the relevant camera model.

The selection sequence of menus is displayed in 
procedures.
(Example: Select the [Window] menu  [Main
Window].)
Square brackets are used to indicate items such as
menu names, button names and window names
that appear on the computer screen.



Text inside < > indicates a camera switch name or
icon, or a keyboard key name.



p.** indicates a reference page.

Click to move to the relevant page.



: Marks information that should be read before

use.



: Marks additional information you may find

helpful.

 Switching Between Pages



Click on arrows on the bottom right of the screen.

: Next page

: Previous page

: Return to a page you had previously displayed



Click on the chapter headings on the right side of
the screen to switch to the contents page of that
chapter. Also, click the item you want to read about
on the table of contents to move to the relevant
page.

Remote

Shooting

3

Preferences

4

Reference

Index

© CANON INC. 2018 CCS-M056EUaWE-170

READ CAREFULLY BEFORE USING!

CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM
IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF
THIS AGREEMENT.

This is a license agreement (the [Agreement]) between you and Canon Inc. ([Canon]).

IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE SOFTWARE PROGRAM ON THE CD-ROM AND THE USER MANUAL IN THIS BOX
(COLLECTIVELY, THE [SOFTWARE]) AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM
THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND.

In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions
of this Agreement.

1. LICENSE: Canon grants you the non-exclusive right to use the SOFTWARE only on a single
computer. You may physically transfer the SOFTWARE from one computer to another provided
that the SOFTWARE is used on only one computer at a time. You shall not install or use the
SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware
configuration where the SOFTWARE is accessible to more than one CPU or to more than one
user.

YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE,
TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE,
ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART,
EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.

2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or
copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer
and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation
of this Agreement. You must reproduce and include the copyright information on the back-up
copy.

3. SUPPORT AND UPDATES: Canon is not responsible for providing maintenance or support for
use of the SOFTWARE. No updates, fixes or support will be made available for the
SOFTWARE.

4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose,
maintain and match the hardware and software components of your computer system. Thus
Canon does not guarantee uninterrupted service or correction of errors or that the functions or
performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED
ON AN [AS IS] BASIS AND WITHOUT WARRANTY OF ANY KIND. The CD-ROM storing the
SOFTWARE is warranted only against defective material under normal use for a period of ninety
(90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt.
Your sole remedy for a defective CD-ROM shall be replacement of the same without charge
when returned by you at your expense to your point of purchase and proven to be defective
upon inspection. The replacement CD-ROM will be warranted for the remainder of the original
ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if
the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE
and shall not extend to anyone other than the original user of the SOFTWARE.

EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S
SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.

NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS
LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION,
DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF

PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE
SOFTWARE OR THE USE THEREOF.

NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS
SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT
BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF
INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.

5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until
expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may
terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate
without notice to you if you fail to comply with any of the terms of this Agreement and you must
then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights.

6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with
restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer software clause at
DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software
Restricted Rights Clause at FAR 52.227-19, as applicable.

7. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be
illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void
with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this
Agreement shall remain in full force and effect.

8. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in
the United States of America shall be governed and construed in all respects in accordance with
the laws and regulations of the State of New York, without reference to choice of law principles.
The terms of this Agreement as it relates to purchases of the Software in Canada shall be
governed by the laws of the province of Ontario.

9. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the
SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of
the SOFTWARE is subject to the United States, Canada and other applicable copyright and
trademark laws and nothing in this Agreement constitutes a waiver of the rights of Canon, its
affiliated corporations and third party licensors under such laws.
Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any
images, graphics or textual material that you save in connection with the Software.

10.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU
HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS
TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE
COMPLETE
CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS
OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS
BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY
AUTHORIZED OFFICER OF CANON.

ND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON

A

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

1

Introduction

In EU Ver. 3.8.20 or later, clicking [ ] in the main window allows
you to check for update files on the server and download any

update files that are available.
To use this function, an environment with Internet access
(subscription to a provider and an in-place line connection) is
required. Internet Service Provider (ISP) connection fees or access
point connection fees may apply.

Introduction

EOS Utility (hereinafter EU) is software for communication with your EOS
DIGITAL camera. By connecting the camera and computer with an
interface cable, you can download to your computer images saved in the
camera’s memory card as well as set various camera settings or shoot
remotely from EU on your computer.

Main Features of EU

From EU, you can control the camera remotely and perform the
following main features.

 Batch download to your computer images

saved in the camera’s memory card.

 You can also download to your computer only images you have

selected.

 Set various camera settings from your

computer.

 Shoot remotely by controlling the camera

from your computer.

 Remote Live View shooting – Shoot while checking your subject in

real time on your computer.

 You can also shoot remotely by operating the camera’s shutter

button.

 Preset a time allowing the camera to shoot automatically with

timer shooting.



When downloading images or shooting
remotely, view/check images with the linked
Digital Photo Professional version 4.x
immediately.

System Requirements

OS Windows 10, Windows 8.1, Windows 7*

PC with one of the above OS preinstalled and a USB port

Computer

CPU 1.6GHz Pentium or higher

RAM Minimum 1GB*

Display

*1Compatible with 32-bit/64-bit systems for all versions except Starter

Edition

2

.NET Framework is Microsoft software. It is installed together with EU.

*
*3For Windows 10, Windows 8.1, or Windows 7 64-bit systems,

minimum 2GB
Check the Canon Web site for the latest system requirements, including
supported OS versions.

as a standard feature (Upgraded machines not supported)
* .NET Framework 4.5 or later is required.*

3

Screen resolution: 1024 × 768 pixels or more
Color quality: Medium (16 bit) or more

1

2

Supported Camera

Can be used for RAW images, JPEG images, and movies shot with the
cameras below.

EOS-1D X Mark II

EOS 5DS/5DS R EOS 5D Mark IV EOS 5D Mark III

EOS 6D Mark II EOS 6D

EOS 80D EOS 77D

EOS REBEL T7i/
800D

EOS REBEL T7/
2000D/1500D

EOS M6*
EOS M10* EOS M100* EOS M50

* When these cameras are linked with EU, the capture window does not

appear as they are unable to perform remote shooting and Remote
Live View shooting.

EOS-1D X EOS-1D C

EOS 7D Mark II

EOS REBEL T6S/
760D

EOS REBEL SL2/
200D

EOS REBEL T6/
1300D

EOS M5* EOS M3*

EOS REBEL T6i/
750D

EOS REBEL T100/
4000D/3000D

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

2

Contents

Introduction ................................................................ 2

Introduction

Setting Picture Styles and Applying to the

Main Features of EU.....................................................

System Requirements ..................................................

Supported Camera .......................................................

1 Downloading Images to your Computer ................. 5

Connecting the Camera and Computer ........................

Starting up EU ..............................................................

LAN Connection with EU ..........................................

Batch Downloading Images to Your Computer.............

Downloading Selected Images to Your

Computer ...............................................................

Operating the Camera to Download Images to Your

Computer ...............................................................

Exiting EU ..................................................................

10

13
14

2 Setting the Camera from Your Computer ............. 15

Settings with the Camera Settings Window...............

Items Settable with the Camera Settings

Window ..................................................................

Applying Picture Style Files to the Camera ...........

Registering Lens Aberration Correction Data for the

Lens in the Camera ...............................................

Saving White Balance to your Computer...............

Registering Personal White Balance in the

16

17
18

20
25

2
2
2

6
7
8
9

Camera...................................................................

Setting JPEG Quality and Applying to the

Camera...................................................................

Adjusting White Balance and Applying to the

Camera...................................................................

3 Remote Shooting by Controlling the Camera from

Your Computer..................................................... 33

Remote Live View Shooting .......................................

HDR (High Dynamic Range) Shooting .......................

Remote Live View Window Functions ........................

Focusing Manually..................................................

Focusing Using AF .................................................

Checking the Depth of Field and Exposure ............

White Balance with the Remote Live View

Window...................................................................

Displaying an Electronic Level................................

Changing the Aspect Ratio.....................................

Audio Recording Setting.........................................

Overlaid Display Function.......................................

Displaying Grid Lines..............................................

Displaying Guide Lines...........................................

Power Zoom Operation ..........................................

30

32

32

34
40
42
42
44
47

48
49
50
51
53
57
58
60

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

Camera ..................................................................

Function Settings with Shooting Menu of the Capture

Window ......................................................................

Items Settable with the Capture Window...............

26

28
29

Shooting by Operating the Camera............................

Shooting Movies.........................................................

Timer-controlled Shooting ..........................................

Timer Shooting .......................................................

Remote Interval Timer Shooting.............................

62
63
68
68
68

3

Remote Bulb Shooting...............................................

70

List of Flash Function Settings Window Functions .....

Introduction

95

Remote Bulb Shooting...........................................

Setting the Bulb Timer ...........................................

Flash Shooting...........................................................

Editing Picture Styles Using Remote Live View

Function ............................................................................

Registering Background Music to a Camera

Memory Card .............................................................

Setting Web Services ................................................

Registering IPTC Information ....................................

4 Preferences .......................................................... 82

Preferences ...............................................................

Basic Settings ........................................................

Destination Folder..................................................

File Name ..............................................................

Remote Shooting ...................................................

Linked Software .....................................................

70
71
72

75

76
79
81

83
83
83
84
84
85

List of Remote Live View Window (Live View Tab)

Functions....................................................................

List of Remote Live View Window (Compose Tab)

Functions....................................................................

List of Zoom View Window Functions.........................

Index...........................................................................

About This Instruction Manual ..............................

Trademarks ..........................................................

96

97
98

99
100
100

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Time Settings.........................................................

Survey....................................................................

Reference................................................................. 87

Troubleshooting .........................................................

Uninstalling the Software ...........................................

List of Viewer Window Functions...............................

List of Register Data Window Functions for Lens Data/

Lens Aberration Correction........................................

List of Capture Window Functions .............................

85
86

88
90
91

92
93

Index

4

1

Downloading Images to your Computer

Basic operation such as preparing for downloading images to your
computer (connecting your camera and computer), starting up EU,
downloading images from your camera to your computer and exiting EU
are explained here.

Introduction

Contents

Connecting the Camera and Computer..................... 6

Starting up EU ........................................................... 7

LAN Connection with EU..............................................

Batch Downloading Images to Your Computer ......... 9

Downloading Selected Images to Your Computer......

Downloading and Erasing GPS Log Files from a

Camera...................................................................

Operating the Camera to Download Images to Your

Computer....................................................................

Exiting EU................................................................ 14

10

13

13

Downloading

Images

1

8

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

5

Connecting the Camera and Computer

1D X Mk II

5DS/5DS R

5D Mk IV

7D Mk II

 Using a genuine Canon interface cable is recommended.
 Confirming Computer Settings

Before you start up EU, connect the camera and the computer
and turn on the camera’s power, then make sure that the
following settings are applied to your computer. If these are not
applied, adjust the settings as follows.

Windows 7

Select [Control Panel]  [Devices and Printers].  Double­click the icon of the camera connected to the computer. 
Double-click [Change general settings] in the menu that
appears.  Set the pull-down menu for [When this device
connects to this computer] to [Take no action].

Windows 8.1

Select [Control Panel]  [View devices and printers]. 
Double-click the icon of the camera connected to the
computer.  Select and double-click [Change general
settings] in the menu that appears.  Set the pull-down menu
for [When this device connects to this PC] to [Take no action].

Windows 10

Select the Start menu  [Settings]  [Devices]  [AutoPlay]
 In the window that appears, locate the pull-down menu

under the name of the camera connected to the computer and
set it to [Take no action].

After confirming and adjusting the settings, set the camera’s
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.

 With ,

you can fix the plug to the camera with the cable protector to
prevent the plug from disconnecting. For details on using it, see
the camera instruction manual.

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

7D Mk II

To download to your computer images shot with your camera, you will
need to connect your camera and computer using an interface cable.

Before connecting your camera and computer with EU’s Wi-Fi/LAN
connection pairing function, see “LAN Connection with EU” (p.8).

Connect the large plug of the cable into the USB port

1

of your computer.

 For the location and direction of the USB port, refer to the user’s

manual for the computer.

Connect the small plug of the cable into the digital

2

terminal on your camera.

 Once the plug is connected to the camera according to the steps

for your camera model, preparation for downloading images is
complete. Refer to “ Confirming Computer Settings” to check
the settings of the computer, and continue with “Starting up EU”

(p.7).

 When connecting the cable to the camera, use the cable

protector. Connect the cable to the digital terminal with the plug’s
< > icon facing the back of the camera.

Cameras other than those above

 With the < > mark on the plug facing the front of the camera,

connect it to the camera’s <A/V OUT / DIGITAL> terminal or
digital terminal.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

6

Starting up EU

EU Main window

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

When EU starts, a [ ] icon appears on the taskbar of the desktop.
You can click this icon and display the screen to apply the setting

below.

[Do not launch EOS Utility automatically when camera is

connected]
If you select [Quit] on this screen, EU will not start automatically
when you connect the camera and the computer again.

When the camera’s power switch is set to <ON>, EU will start up, and
the camera and computer will be able to communicate.

Set the camera’s power switch to < ON >.

1

 With

, you can operate the camera and download images
saved on the memory card inserted in the camera to your
computer. Refer to your camera’s Instruction Manual for details.

Introduction

Contents

Double-click the [EOS Utility] icon on the desktop.

2

 Communication between the camera and the computer begins,

and the next screen is displayed.

 From the next time you connect your camera and the computer,

EU will start when you set your camera’s power switch to <ON>.

 EU starts up, the main window appears, and your camera and

computer can now communicate. Continue with “Batch
Downloading Images to Your Computer”.

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

7

LAN Connection with EU

REBEL T6S

760D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M6M5M3

M10

M100

Before starting the procedure to establish a LAN connection, make sure
to perform the following confirmation.

Introduction

The Wi-Fi/LAN connection pairing function of EU is used for LAN

connection. This function cannot be used with

.

Establish a connection following the procedures on Wireless File
Transmitter Instruction Manual, Wi-Fi Function Instruction Manual or
Wired LAN Instruction Manual supplied with the camera, and Wi-Fi
Adapter W-E1 Instruction Manual. Note the difference between
connection procedures for EU version 2.14 or later and those for EU
version 2.13 or earlier as shown below.

 Starting up WFT pairing software

(EU version 2.13 or earlier)
Starting up WFT pairing software is required.
(EU version 2.14, version 3.x)
While starting up WFT pairing software is not necessary, starting up
EU is required.

 When a camera is detected

(EU version 2.13 or earlier)
When a camera is detected and a message is displayed, double-click

the WFT pairing software icon.
(EU version 2.14, version 3.x)
When a camera is detected and a message is displayed, click the

message.

Start up EU before connecting the camera and the

1

computer.

 The following window appears.

Click the [Pairing over Wi-Fi/LAN] button. When a

2

message [To connect to the camera via LAN, some
Windows Firewall settings must be changed. Do you
want to make these changes?] appears, select [Yes].

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

8

Batch Downloading Images to Your Computer

You can batch download to your computer the images saved on the
memory card inserted in the camera according to the selected condition.

The downloaded images are sorted by date into folders and are then
displayed in the main window of Digital Photo Professional version 4.x
(RAW image processing, viewing and editing software) (hereinafter
DPP), which is linked to start up automatically, where you can check
them immediately.

Click [Download images to computer].

Select a condition for downloading images and click

3

the [OK] button.

1

 The setting dialog box closes.

Click the text [Start automatic download].

4

 Download images window appears.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Click the [Settings] button in [Start automatic download].

2

 The setting dialog box appears.

Reference

Index

 The [Save File] dialog box appears and image downloading to

your computer begins.

 The downloaded images are saved in the [Pictures] folder.
 When all images have been downloaded, DPP starts up

automatically and the downloaded images are displayed in
DPP’s main window.

9

Check the downloaded images.

DPP Main window

 You can change the software, which starts up when you

download images, from DPP to other software in preferences
([Linked Software] tab sheet) (p.85).

 You can change the save destination for images downloaded

and images to download in preferences ([Destination Folder] tab
sheet (p.83).

 Downloading movie files may take some time due to the large file

size.

Downloading Selected Images to Your Computer

5

Introduction

 Check the downloaded images in DPP.

For details on using DPP, refer to the “Digital Photo Professional
Version 4.x Instruction Manual” (PDF electronic manual).

 Continue with “Exiting EU” (p.14).

From the images saved in your camera’s memory card, you can select
the ones you want and download them to your computer.

Click [Select and download].

1

 The viewer window appears and the images in the memory card

are displayed.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

10

View the images and select images to download.

Viewer window

Add check mark

 You can click the [ ] button to change the thumbnail order.

 You can click the [ ] button to filter the images with various

conditions and select images you want to download.

 You can click the [ ] button to select the information

displayed on thumbnails.
Selecting [Date/time] displays the date and time when the file was
created.

 You can click the [ ] button to invert selection between

selected and not-selected images.

 You can click the [ ] button to show only selected images.

 You can click the [ ] button to filter images by the

date and time files were created.

 You can click the [ ] button to change to the list view.

Click the [ ] button to return to the thumbnail view.

 In the list view, you can click on the title of each item to begin

sorting.
Click [Folder] to sort in the same way as the [ ] button in
thumbnail view.

2

 You can also select several images with your mouse.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

11

Click the [Download] button.

Download image dialog box

Specify the save destination

Displays the save destination on the computer

 By clicking the [Format] button in the viewer window, you can

initialize the card to which the images displayed in the viewer
window.

 In step 2, you can batch checkmark several images in sequence.

After clicking the first image you want to download, hold the
< Shift > key and click the last image, and [ ] will be
displayed. By clicking the [ ] button, the selected images will
be checkmarked in a batch.

 For a list of viewer window functions, see p.91.

3

 The download image dialog box appears.

Specify the save destination and then click the [OK]

4

button.

 The [Save File] dialog box appears and image downloading to

your computer begins.

 The images downloaded to your computer are displayed in the

[Quick Preview] window.

 The [Quick Preview] window allows you to quickly review the

downloaded images. You can also resize the [Quick Preview]
window.

 When all images have been downloaded, DPP starts up

automatically and the downloaded images are displayed.

 To switch to the main window, click the [Main Window] button in

the viewer window.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

12

Downloading and Erasing GPS Log Files from a Camera

1D X Mk II

5D Mk IV

6D Mk II

6D(WG)

7D Mk II

6D(WG)

7D Mk II

1D X Mk II

5D Mk IV

6D Mk II

6D Mk II

5D Mk IV

1D X Mk II

6D(WG)

7D Mk II

Operating the Camera to Download Images
to Your Computer

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

Introduction

EOS DIGITAL cameras with built-in GPS have a function for saving
GPS log files. Using EU, you can download to your computer GPS log
files saved in the camera’s internal memory or on the camera’s memory
card. You can also delete GPS log files saved in the camera’s memory
card. This function is enabled only when a compatible version of Map
Utility* is installed.

For and , the camera’s [Select GPS device] must be
set to [Internal GPS], or [GPS] be set to [Enable], and for

and , [GPS settings] be set to [Mode 1] or [Mode 2].

* For : Ver.1.8.x or later, for : Ver.1.7.2 or later, for

: Ver. 1.7.x or later, for : Ver. 1.4 or later, and for

: Ver. 1.5.3 or later.

After starting EU to download images on a camera’s memory card to
your computer, the [Import GPS log files] dialog box appears if there are
GPS log files in the camera’s internal memory or the camera’s memory
card.

 Click the [Yes] button to download GPS log files to your

computer.

 The GPS log files are downloaded to your computer. When there

are GPS log files in the camera’s internal memory, they are
saved to the camera’s memory card* before being downloaded to
your computer.
Note that once the GPS log files are saved on the memory card,
GPS log files in the camera’s internal memory will be deleted.

* GPS log files are saved on the memory card specified as the

save destination by the camera.

If your camera has a direct image transfer function, you can download to
your computer the images saved on the memory card inserted in the
camera by operating the camera. Refer to your camera’s Instruction
Manual for details on its direct image transfer function.

Connect your camera and computer, and then start

1

up EU

(p.6)

.

Operate the camera to transfer the images directly.

2

 The images in the camera are saved to your computer.

 When all images have been downloaded, Digital Photo Professional

version 4.x starts up and the downloaded images are displayed.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

 If you remove the check mark from [Delete the GPS log files from

the camera’s memory card after importing.], GPS log files in the
camera’s memory card will not be deleted even after they are
downloaded to your computer.

 Downloaded GPS log files are saved in the following folder.

Computer’s Documents folder  [Canon Utilities]  [GPS Log Files]

13

Exiting EU

EOS Utility Survey Program

Canon requests that information related to your Canon product be
sent to Canon (in case of using your Canon product in China, to the
legally approved research company) through the Internet. Canon
uses such information for development and marketing of products
that better meet customer needs.
Even after agreeing, you can change the send settings anytime in
the [Survey] tab sheet (p.86) in preferences.

Click the [Quit] button.

1

 The window closes and EU exits.

Turn the camera’s power switch to < OFF >.

2

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Disconnect the cable from the camera and computer.

3

 Do not pull on the cable; hold the plug and pull out.

Reference

Index

14

2

Setting the Camera from Your Computer

Introduction

This section explains how to set the camera’s functions with EU.

Settings with the Camera Settings Window............. 16

Items Settable with the Camera Settings Window......

Applying Picture Style Files to the Camera ................

Registering Lens Aberration Correction Data for

the Lens in the Camera ..............................................

Saving White Balance to your Computer ....................

Registering Personal White Balance in the Camera ......

Function Settings with Shooting Menu of the Capture

Window.................................................................... 28

Items Settable with the Capture Window....................

Setting Picture Styles and Applying to the Camera....

Selecting a Picture Style and Applying to the

Camera...................................................................

Changing Picture Style Settings and Applying to the

Camera...................................................................

Setting JPEG Quality and Applying to the Camera ....

Adjusting White Balance and Applying to the Camera .....

17
18

20
25
26

29
30

30

31
32
32

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

15

Settings with the Camera Settings Window

Settings specified with the camera settings window are explained here.
Most functions set with the camera settings window requires to be set
before shooting.

Connect your camera and computer, and then start

1

up EU

Click [Camera settings].

(p.7)

.

Click the required setting and specify each one.

3

2



Available settings are displayed for the camera that is connected.
For more details, see “Items Settable with the Camera Settings
Window” (

 For how to register Picture Style files, lens aberration correction

data, or personal white balance setting, see “Applying Picture
Style Files to the Camera” (p.18), “Registering Lens Aberration

 The camera settings window appears.

Correction Data for the Lens in the Camera” (p.20), and
“Registering Personal White Balance in the Camera” (p.26)
respectively.

p.17

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

).

4

Reference

Index

16

Setting

Items Settable with the Camera Settings Window

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

M6

M5M3M10

M100

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

M50

5DS/5DS R

5D Mk III

7D Mk II

M50

5D Mk IV

1D X Mk II

Firmware update

Date/Time/Zone Setting

Register lens aberration
correction data

Register Picture Style File

Owner’s name/Author/
Copyright holder

Personal white balance
settings

WFT Captions

Register Background Music

Web Service Settings

Register IPTC information




–

–







––







*1

*2

*3

*4

–

–

–

–







–

–

*5

*3

Cannot be set with .

*4

Can be set with .

*5

Can be set with (firmware version 1.1.0 or later).

Firmware update

 You can display the version of the camera’s firmware.
 You can update the firmware by clicking on this item.
 For more details on updating firmware, refer to the Canon Web site.

Date/Time/Zone Setting

 You can set the camera’s date/time and the time zone where images

were shot.

 You can retrieve the computer’s system time to sync the camera’s

date and time.

 You can set and cancel daylight saving time.

Register lens aberration correction data

 You can register lens aberration correction data for the lens to the

camera or delete registered data from the camera (p.20).

Register Picture Style File

 You can register up to three Picture Style files and saved to your

computer as user-defined settings in your camera (p.18).

Owner’s name

 You can enter and set up to 31 characters as the camera owner’s

name.

Author

 You can enter and set up to 63 characters or symbols, including a

prefix, as the author’s name.

Copyright holder (copyright information)

 You can enter and set up to 63 characters or symbols, including a

prefix, as the photo creation’s copyright holder (copyright
information).

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

*1

Cannot be set with

.

*2

Cannot be set with .

Personal white balance settings

 You can register to the camera a personal white balance file (p.26).

Also, you can save the adjustment results for an image’s white
balance to your computer as a white balance file (extension “.WBD”)

(p.25).

17

WFT Captions

Applying Picture Style Files to the Camera

 You can create captions to be used for the wireless file transmitter’s

“Transfer with caption” and register them to the camera with this
function.

 For more details on WFT caption, refer to the Instruction Manual of

the wireless file transmitter.

Register Background Music

 You can register WAV-format music files, saved to your computer, to

the camera’s memory card as background music. Registered
background music can be played together with a Video Snapshot
Album or slideshow played on the camera (p.76).

Register IPTC information

 If this function for adding IPTC* information is equipped with the

camera, you can edit and register IPTC information. IPTC information
is comment information, such as captions, credits, and shooting
location (p.81).

* International Press Telecommunications Council

Web Service Settings

 You can register web services to a camera (p.79).

You can register up to three Picture Style files downloaded from the
Canon Web site or created with Picture Style Editor (Picture Style file
creating software) (hereinafter PSE) and saved to your computer, as
user-defined settings in your camera.

 Picture Style files created with [Base Picture Style] set to [Fine

Detail] cannot be registered to the cameras which do not have
[Fine Detail] as a preset Picture Style.

 If [Fineness] or [Threshold] in [Sharpness] is set for the Picture

Style file, you cannot register that Picture Style file to the cameras
which do not have [Fine Detail] as a preset Picture Style.

Click [Register Picture Style File].

1

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

 The [Register Picture Style File] dialog box appears.

18

Select a tab from one of [User Def. 1] to [User Def. 3].

 A Picture Style file is an extended function of Picture Style.

For more details on Picture Style files, refer to the Canon Web
site.

 The Picture Style files that you can apply to the camera are files

with the “.PF2” or “.PF3” extension.

 For details on using PSE, refer to the “Picture Style Editor

Instruction Manual” (PDF electronic manual).

2

Select a Picture Style file and then click the [Open]

4

button.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Click the [ ] button.

3

 The [Open] window appears.

 The Picture Style file is loaded.

Click the [OK] button.

5

 The Picture Style file is registered in the camera.

Remote

Shooting

3

Preferences

4

Reference

Index

19

Registering Lens Aberration Correction
Data for the Lens in the Camera

1D C

1D X Mk II

5D Mk IV

Select the lens category for which you want to

2

register correction data.

Introduction

You can register lens aberration correction data for the lens to the
camera, or delete registered data from the camera.
You can also register data for the Digital Lens Optimizer (hereinafter

DLO) in some cameras.

For (firmware version 1.3.0 or later), lens aberration correction
data for EF Cinema lenses (CN-E lenses) can also be registered to the
camera.

Click [Register lens aberration correction data].

1

Register lens data window

 A list appears showing only the selected lens category.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

 The [Register lens aberration correction data] window appears.

Index

20

Register correction data.

3

Icons in the Register Lens Data Window
Left column: camera-registered status of lens aberration

correction data

Check marks will be added to the lenses with their
correction data registered in the camera.

Middle column

Right column: camera-registered status of DLO lens data

: computer download status of DLO lens data

: Not downloaded to the computer.
: Already downloaded to the computer.

: Update data is available on the server.

(The update data is not downloaded to the
computer.)

: Not registered to the camera.

: Already registered to the camera.

Registering Lens Aberration Correction Data to the Camera

Lens aberration correction data for lenses available at the time of
releasing the camera to the market are all registered to the camera.
It will not be necessary to register lens aberration correction data to
the camera also for almost all lenses released to the market after
the camera. However, it will be necessary to register lens
aberration correction data to the camera for lenses with which no
check mark is added to the lens aberration correction data column
in the register lens data window. Register data to the camera with
the following method.

 To register lens aberration correction data for lenses to the

camera, checkmark the boxes of lenses for which you want to
register correction data and then click the [OK] button. EU exits.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

21

Registering DLO Lens Data to the Camera

To use this function, the EOS Lens Registration Tool (version 1.4.20
or later) must be installed.

 For a list of the [Register lens data] window functions, see p.92.
 Lens names displayed in the [Register lens data] window may be

partially shortened depending on the lens type.

 The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye

are not compatible with [Register lens data].

DLO lens data for lenses available at the time of releasing the
camera to the market are all registered to the camera. However, it
will be necessary to download DLO lens data and register the data
to the camera for lenses released to the market after the camera.

1 Download DLO lens data to the computer

If DLO lens data is not downloaded to the computer or not
registered to the camera, the DLO icon on the registering screen
appears as [ ].
Click the name of the lens you want to register.

The DLO lens data is downloaded, and the icon changes to

[].

2 Register DLO lens data to the camera

Click the [OK] button.

The DLO lens data is registered to the camera, and EU exits.
[ ] appears the next time the register lens data window

is displayed.

 If you click the [Cancel] button when step 1 is completed, DLO

lens data is only downloaded to the computer.

 If update data is available on the server, an [ ] icon is

displayed. Click the name of the lens, download the update data
to the computer, and then click the [OK] button to register the
data to the camera.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

22

Lens aberration correction data for all lenses is already registered in the

M50

camera. How to register and delete DLO lens data to and from the
camera is explained here.

Click [Register lens aberration correction data].

1

Select lenses for which you want to register DLO

2

lens data from the [Lens List] and then click the [OK]
button.

Register lens data window

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

 The [Register lens data] window appears.

 The DLO lens data for the selected lens is registered in the

camera, and EU exits.

 You can uncheckmark lenses registered in the [Lens List] and

click the [OK] button to delete DLO lens data from the camera.

 The numerical display [xx/xx] at the bottom right of the [Lens List]

are the number of lenses registered/number of lenses that can
be registered in the camera.

 If a lens does not appear in the [Lens List], mounting that lens on

the camera with this display adds the lens to the list.

 You can rearrange the [Lens List] with the [Up] and [Down]

buttons.

Reference

Index

23

To use this function, the EOS Lens Registration Tool (version 1.8.20
or later) must be installed.

 You can also add lenses to the [Lens List] with the following

method.

• Click the [Edit Lens List] button and in the window that appears,
checkmark the checkbox for the lens in the list and click the
[OK] button.

 Lens names displayed in the [Register lens data] window may be

partially shortened depending on the lens type.

 The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye

are not compatible with this function.

EOS DIGITAL cameras other than

1D X Mk II

5D Mk IV

M50

Click [Register lens aberration correction data].

1

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

 The [Register lens aberration correction data] window appears.

Lenses for which correction data is registered in the camera are
displayed with a check mark.

Select the lens category for which you want to

2

register correction data.

Register lens aberration correction data window

 A list appears showing only the selected lens category.

Preferences

4

Reference

Index

24

Select the lens for which you want to register

To use this function, the EOS Lens Registration Tool must be
installed.

 For a list of the [Register lens aberration correction data] window

functions, see p.92.

 Lens names displayed in the [Register lens aberration correction

data] window may be partially shortened depending on the lens
type.

 The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye

are not compatible with [Register lens aberration correction data].

Saving White Balance to your Computer

1D X Mk II

1D X

1D C

3

correction data and click the [OK] button.

 The correction data for the selected lens is registered in the

camera, and EU exits.

 You can delete correction data from the camera by removing the

check mark from the registered lens and clicking the [OK] button.

 Depending on the camera to be connected, lenses with which the

check mark cannot be removed may be displayed in the
registration window. This indicates that it is not necessary to
register the correction data of the respective lenses to the
camera.

 Not displayed for EF-M lenses, as registration of correction data

is not required.

You can save the adjustment results for an image’s white balance to
your computer as a white balance file (extension “.WBD”). White
balance files saved to your computer can be registered in the camera as
personal white balances (p.26).

Register the white balance adjusted in the [Remote Live View window]
to the camera beforehand.

Click [Personal white balance settings].

1

 The [Personal white balance settings] dialog box appears.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

25

Select the white balance to be saved to your

Registering Personal White Balance in the Camera

1D X Mk II

1D X

1D C

2

computer and click the [Save] button.

In the window that appears, enter a filename, select a

3

save destination, and then click the [Save] button.

 The white balance file is saved to your computer.

White balance files created by adjusting the white balance of an image
and saving the results can be registered in the camera as personal
white balances.

Click [Personal white balance settings].

1

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

 The [Personal white balance settings] dialog box appears.

Select the personal white balance to be registered

2

and click the [Open] button.

 The [Open] dialog box appears.

Reference

Index

26

Open the folder containing the saved white balance

3

file, select the file and then click the [Open] button.

Introduction

 The white balance file is loaded.
 The white balance files that you can register to the camera are

files with the “.WBD” extension.

Enter a title into the [Title:] input field.

4

Click the [Apply to camera] button.

5

 The personal white balance is registered on the camera.
 To register another setting, repeat step 2 to step 5.

Click the [Close] button.

6

 The [Personal white balance settings] dialog box closes and the

display returns to camera settings window.

Select a registered personal white balance on the

7

camera.

 Select a registered personal white balance as the white balance.
 For selecting personal white balance or manual white balance,

refer to “Setting the White Balance” in the camera’s Instruction
Manual.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

27

Function Settings with Shooting Menu of the Capture Window

M6M5M3

M10

M100

Function settings specified with the shooting menu of the capture
window are explained here. Most functions set with the capture window
are those tend to be changed during shooting. This function cannot be
used with .

Connect your camera and computer, and then start

1

up EU

Click [Remote Shooting].

(p.6)

.

Click the [ ] button.

3

2

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

 The capture window appears.

Index

 The [Shooting menu] appears.

28

Click the required setting and specify each one.

Example of menu display ( )

5D Mk III

Items Settable with the Capture Window

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

5DS/5DS R

5D Mk IV

6D Mk II

7D Mk II

80D

77D

4

Introduction

Contents

 Available settings are displayed for the camera that is connected.

For more details, see “Items Settable with the Capture Window”.

Setting

Picture Style
JPEG quality

WB (white balance) SHIFT

HDR Mode
Bulb timer settings

*1 Setting is not possible for

*2



Setting is possible for




–



–
–

, but not for other models.




*1

*2

.

Picture Style

 You can set a Picture Style and apply it to the camera, in the same

way as operating from the camera (p.30).

JPEG quality

 You can set the JPEG image quality and apply it to the camera, in the

same way as operating from the camera (p.32).

WB (white balance) SHIFT

 You can adjust the white balance, in the same way as operating from

the camera (p.32).

HDR (High Dynamic Range) Mode

 You can shoot photos with a wide dynamic range where clipping in

highlights and shadows has been reduced, and photos that appear
like paintings (p.40).

Bulb timer settings

 You can preset the bulb exposure’s exposure time (p.71).

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

29

Setting Picture Styles and Applying to the Camera

Click the Picture Style to be set in the camera.

Picture Style window

When is connected and Canon Log gamma is set on the
camera, the Picture Style set or changed with this software will not
be reflected to the movie you shoot.

1D C

2

Introduction

You can set and apply Picture Styles to the camera, in the same way as
operating from the camera. You can change the values for [Sharpness],
[Contrast], [Saturation] and [Color tone] of each Picture Style and
register up to three of your own Picture Styles in the camera as user­defined settings.

You can also register Picture Style files in the camera as user-defined
settings you have downloaded from the Canon Web site or created with
Picture Style Editor (Picture Style file creating software) (hereinafter
PSE) and saved to your computer.

Registering Picture Styles may take some time.

Selecting a Picture Style and Applying to the
Camera

Click [Picture Style].

1

 The setting is applied to the camera and the display returns to

the [Shooting menu].

 Displayed contents may differ depending on the connected

camera.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

 The [Picture Style] window appears.
 Displayed contents may differ depending on the connected

camera.

Index

30

Changing Picture Style Settings and Applying

Cursor position

Default setting

Setting

to the Camera

You can set your own Picture Style [Sharpness], [Contrast], [Saturation]
and [Color tone] and apply them to the camera, in the same way as
operating from the camera.

Set by clicking the pointer on the slider for each

2

item.

Introduction

Contents

Click [Detail set.].

1

 The [Detail set.] dialog box appears.
 Displayed contents may differ depending on the connected

camera.

 If you select [Monochrome] for the Picture Style (p.30), the [Filter

effect] and [Toning effect] list boxes appear.

 Depending on the connected camera, you may be able to specify

[Fineness] and [Threshold] settings for [Sharpness].

Click the [Return] button.

3

 The settings are applied to the camera, and the display returns to

the [Shooting menu].

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

31

Introduction

Setting JPEG Quality and Applying to the Camera

1D X Mk II

1D X

1D C

Adjusting White Balance and Applying to the Camera

Displays the
compensation
value

Compensates
amber

Compensates
magenta

Compensates
green

Compensates
blue

You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera.

Click [JPEG quality].

1

 The [JPEG Quality] window appears.

Click the setting value.

2

You can adjust white balance, in the same way as operating from the
camera.

Click [WB SHIFT].

1

 The [WB SHIFT] window appears.

Click the compensation position.

2

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

 The settings are applied to the camera.
 Higher values give a lower compression ratio and higher image

quality for any size.

Click [Return].

3

 The display returns to the [Shooting menu].

 The settings are applied to the camera.

Click [Return].

3

 The display returns to the [Shooting menu].
 To revert the corrected values to the original values, follow the

procedure in step 2.

Index

32

3

M6M5M3

M10

M100

Remote Shooting by Controlling the Camera from Your Computer

Introduction

From EU, you can control the camera remotely, and by viewing the subject in
the EU window, you can set the camera and shoot. You can also shoot by
directly operating your camera even during remote shooting, or preset a time
allowing the camera to shoot automatically with timer shooting. This function
cannot be used with .

Remote Live View Shooting ..................................... 34

HDR (High Dynamic Range) Shooting..................... 40

Remote Live View Window Functions...................... 42

Focusing Manually.....................................................

Focusing Using AF ....................................................

Focusing Using Quick Mode..................................

Focusing Using Live Mode ....................................

Focusing Using Face Detection Live Mode ...........

Focusing Using Face+Tracking .............................

Focusing Using FlexiZone-Multi & Smooth

zone AF .................................................................

Checking the Depth of Field and Exposure ...............

White Balance with the Remote Live View Window........

Displaying an Electronic Level...................................

Changing the Aspect Ratio........................................

42
44
44
45
46
46

47
47

48
49
50

Hiding an Overlay Image ........................................

Displaying Grid Lines..................................................

Displaying Guide Lines...............................................

Power Zoom Operation ..............................................

Shooting by Operating the Camera ......................... 62

Shooting Movies ...................................................... 63

Timer-controlled Shooting ....................................... 68

Timer Shooting ...........................................................

Remote Interval Timer Shooting.................................

Remote Bulb Shooting............................................. 70

Remote Bulb Shooting................................................

Setting the Bulb Timer................................................

Flash Shooting......................................................... 72

Editing Picture Styles Using Remote Live View

Function................................................................... 75

Registering Background Music to a Camera Memory

Card......................................................................... 76

Setting Web Services .............................................. 79

Registering IPTC Information .................................. 81

57
57
58
60

68
68

70
71

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

Audio Recording Setting ............................................

Audio Recording/Audio Recording Level ...............

Wind Filter Function...............................................

Overlaid Display Function..........................................

Enlarging/Reducing an Overlay Image ..................

Rotating an Overlay Image ....................................

Setting the Composite Ratio of an Overlay Image

Moving an Overlay Image......................................

Displaying a Different Overlay Image ....................

....

51
52
52
53
54
55

55
56
56

33

Remote Live View Shooting

You can control your camera remotely from EU and shoot still images
from your computer screen.

Also, the shot images are saved directly on your computer and you can
recheck them using the linked software Digital Photo Professional
version 4.x (hereinafter DPP).

This function is effective for shooting large numbers of shots with fixed­framing such as for studio shooting.

Connect your camera and computer, and then turn

1

the camera’s power switch to < ON >.



EU starts up.

Click [Remote Shooting].

2



The capture window appears.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

34

Set the camera.

Click or right-click the
setting item and select the
setting*

1 *2

For a list of the capture window functions, see p.93.

5DS/5DS R

3

*1 If you checkmark [Change settings using mouse wheel on capture

screen] (p.84) on the [Remote Shooting] tab sheet on the
[Preferences], you can also select settings with the scroll-wheel
on your mouse. You cannot use the scroll-wheel in the mirror
lockup menu or under [Image saving location].

*2

You c

an right-click the Exposure level/AEB level item and perform

AEB setting using the <Shift> key + scroll-wheel.



The settings that cannot be set in the capture window can be set
by operating the camera.



A warning lamp blinks during the countdown for self-timer
shooting and the countdown time is displayed in the area for the
number of possible shots.



Mirror lockup settings are available when the camera mode is P,
Tv, Av, M, or B.



During mirror lockup, the mirror lockup icon blinks.



With , you can select the release timing after the
mirror lockup to take a picture. Timing can be selected from 1/8
second later, 1/4 second later, 1/2 second later, 1 second later,
and 2 seconds later.



When shooting with auto exposure, the shutter speed or aperture
blinks to indicate under-exposure or over-exposure conditions.



When shooting with manual exposure, the metering value is
displayed in real time in the exposure level area.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

35

Click the [ ] button.

Click

4

Set the Live View function.

5



Click [Live View/Movie func. set.].



The [Live View/Movie func. set.] window appears.
For details on specifying settings, see the next page.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4



The [Set-up menu] appears.

Reference

Index

36

Select [Enable] for [LV func. setting] and the setting for [Exposure

Live View/Movie func. set. window



Displayed contents may differ depending on the connected
camera.

1D X Mk II

5DS/5DS R

5D Mk III

6D Mk II

6D

7D Mk II

80D

ClickSelect

ClickSelect

1D X Mk II

5D Mk IV

7D Mk II

5DS/5DS R

5D Mk III

6D Mk II

80D

6D

1D X

1D C

ClickSelect

Select [Enable] for [LV func. setting] and then click the [OK] button.

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

ClickSelect

Select [Enable] for [LV func. setting] and the setting for [Exposure
simulation], then click the [OK] button.

M50

Click

Select

simulation], then click the [OK] button.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Select [Stills] for [LV func. setting] and a setting for [Exposure
simulation], and click the [OK] button.

Reference

Index

37

Exposure simulation

Exposure simulation simulates and displays the image with a
brightness close to the actual resulting image.



Enable
The displayed image brightness will be close to the actual
brightness (exposure) of the resulting image. If you set exposure
compensation, the image brightness will change accordingly.



Disable
The image is displayed at the standard brightness to make the
Live View image easy to see. Even if you set exposure
compensation, the image is displayed at the standard
brightness.



Enable (DOF preview)
Normally, the image is displayed at the standard brightness to
make the Live View image easy to see. The image will be
displayed close to the actual brightness (exposure) of the
resulting image only while you hold down the depth-of-field
preview button.

Click the [Live View shoot.] button.

Remote Live View window

6



The [Remote Live View window] appears.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

38

Click the [ ] button to shoot.



You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after the processing is finished.



Options for Basic Zone modes cannot be set to cameras
equipped with Basic Zone modes on their Mode Dials.

You can also shoot using the <space> bar on the keyboard.



You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.



To perform exposure simulation (p.47) with [Remote Live View
window] or enable display of histograms (p.96), set your camera’s
[Exposure simulation] in the menu to [Enable].



You can also use mirror lockup with remote shooting. (Mirror
lockup is not possible during Remote Live View shooting.)



Self-timer shooting is possible.



You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to other software in preferences ([Linked Software] tab sheet)

(p.85).



For a list of the [Remote Live View window] functions, see p.96.



For a list of the [Zoom View] window functions, see p.98.

7

Introduction

Contents



The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.



You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.



You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

39

HDR (High Dynamic Range) Shooting

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D



Displayed contents may differ depending on the connected camera.

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

7D Mk II

80D

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear like
paintings. This is suited for scenes such as still-life and landscape. In
HDR shooting, one shot is taken using three images shot with different
exposures (negative exposure, standard exposure, positive exposure),
and they are combined into a single image automatically. Shot HDR
images are recorded in JPEG quality.

* HDR stands for High Dynamic Range.

Set to HDR.

1



Select [HDR Mode] in the [Shooting menu], and in the dialog box
that appears, specify the required settings and click the [OK]
button.



[Adjust dynamic range]: Sets the range of adjustment for
dynamic range. Select from [Disable HDR], [Auto], [±1 EV],
[±2 EV], and [±3 EV]. When selecting [Auto], the range of
adjustment will be set automatically depending on the image’s
overall tonal range.
The higher the number, the wider the dynamic range will be.



[Effect] :
Selects the finishing effect. For specific finishing effects, refer to
the pages about HDR (High Dynamic Range) shooting in the
Instruction Manual provided with your camera.



[Continuous HDR]: If [1 shot only] is selected, HDR shooting is
cancelled automatically after you finish shooting. If you select
[Every shot], HDR shooting is continued until you select [Disable
HDR] in [Adjust dynamic range].



[Save source images] : To
save the three shot images and the completed HDR image,
select [All images]. To save only the completed HDR image,
select [HDR image only].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

40

Take a shot.



The HDR mode cannot be set if you use any of the following
functions: AEB, white balance bracketing, Multi Shot Noise
Reduction, multiple exposures, flash exposure, remote bulb
shooting, or movie shooting.



HDR shooting of a moving subject is not recommended because
the movement of the subject will appear as afterimages in the
merged image. HDR shooting is recommended for still subjects.



In HDR shooting, 3 images are captured with different shutter
speeds set automatically. Therefore, even in Tv and M shooting
modes, the shutter speed will be shifted based on the shutter
speed set.



To prevent camera shake, the ISO speed may be set higher than
usual.



Auto image alignment may not work properly with repetitive
patterns (lattice, stripes, etc.) or flat, single-tone images.



The color gradation of the sky or white walls may not be
reproduced correctly. Irregular colors or noise may appear.



With HDR shooting, the three images will be merged after you
take a picture. Therefore, it will take a longer time to record the
HDR image than with normal shooting. During the merging of the
images, “BUSY” will be displayed on the camera and you cannot
take another picture until the merging is completed.



Using a tripod is recommended. For handheld shooting, using a
fast shutter speed is recommended.



If [Auto Image Align] is set to [Enable] and the HDR picture is
shot handheld, the edges of the photos will be cropped, lowering
the resolution slightly. Also, if the images cannot be aligned
properly due to camera shake, etc., auto image alignment may
not take effect. Note that when shooting with excessively bright
or dark exposure settings, auto image alignment may not work
properly.



If you perform handheld HDR shooting while [Auto Image Align]
is set to [Disable], the 3 images may not be properly aligned and
the HDR effect may be minimal.



HDR shooting under fluorescent or LED lighting may result in
unnatural color reproduction of the illuminated areas.



In HDR mode, the options dimmed in the menu cannot be set.
Note that when you set HDR mode, for Auto Lighting Optimizer,
highlight tone priority, and exposure simulation, [Disable] will be
applied for shooting.

2

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

41

Remote Live View Window Functions

Focusing Manually

Drag

These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.

See also the list of [Remote Live View window] functions at the end of
this manual (p.96, p.97).

You can focus manually while viewing the enlarged image in the
[Remote Live View window].

Set the lens’s focus mode switch to < AF >.

3

1

Select [Live mode], [FlexiZone - Single] or [Live 1-

2

point AF] from the list box.

Drag [ ] to the section you want to enlarge.



You can also click the section you want to enlarge to move [ ].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4



If the [Continuous AF] checkbox is displayed, uncheckmark the
checkbox.

Reference

Index

42

Click the [ ] or [ ] button.

5DS/5DS R

Zoom View window

5DS/5DS R

Closer

Further away

You can also focus using a key operation on the keyboard.

Adjustment Closer Further away

Large amount < I > < O >

Medium amount < K > < L >

Small amount < < > < > >

4



When is connected, the [ ] and [ ] buttons are
displayed as [ ] and [ ] buttons.



The section you selected in step 2 is displayed enlarged in the
[Zoom View] window.

Adjust the focus.

5



[ ], [ ]: Adjustment Large amount



[ ], [ ] : Adjustment Medium amount



[ ], [ ] : Adjustment Small amount



The [Remote Live View window] changes in real time according
to the focus position adjustment.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference



To move the display position in the [Zoom View] window, click on
[ ], [ ], [ ], [ ]. You can also move the display position
by dragging the window.



You can also double-click the section you want to enlarge in step
2 to display an enlarged view at 5 times (when is
connected, at 6 times) in the [Zoom View] window.



Double-click an image in the [Zoom View] window to return to the
[Remote Live View window].

Index

43

In Quick, Live, Face Detection Live, and other AF modes, images can

Focusing Using AF

1D X

1D C

5D Mk III

6D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

Click

If [Orientation linked AF point] is set to [Select separate AF points],
set it to [Same for both vert/horiz]. When [Select separate AF
points] is set, focusing with AF in the [Remote Live View window]
may not be performed properly.



Double-clicking an AF point also performs AF.



To cancel AF operation, click the [OFF] button.

be focused automatically in the same way as on the camera itself.

Focusing Using Quick Mode

Click the AF point in the position where you want to

3

focus.

Introduction

Contents

Downloading

Images

1

Select [Quick mode] from the list box.

1



The AF points appear.



Selectable options differ depending on the connected camera.



You can switch between showing and hiding the AF points by
clicking the [ ] button.

Select an AF point selection method from the list box.

2



If [Automatic selection] is selected in step 2, all the AF points are
automatically selected.



If [Manual selection] is selected in step 2, only the selectable AF
points are displayed.

Click the [ON] button.

4



AF is executed.



When focus is achieved, the camera makes a beeping sound
and the AF point color changes.

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



Selectable items differ depending on the camera settings.

44

Focusing Using Live Mode

5DS/5DS R

7D Mk II

REBEL T6S

760D

REBEL T6i

750D

M501D X Mk

II

5D Mk IV

6D Mk II

80D

77D

REBEL T7i

800D

REBEL SL2

200D

Drag

Select [Live mode], [FlexiZone – Single] or [Live 1-

1

point AF] from the list box.



The AF point appears.



On

, you can set continuous AF to on/off with the

[Continuous AF] checkbox. When shooting movies, the

[Continuous AF] checkbox changes to the [Movie servo AF] on/
off checkbox.

With

, the [Movie Servo AF] checkbox is
displayed when shooting movies, allowing movie servo AF on/off

to be selected.



You can switch between showing and hiding the AF point by
clicking the [ ] button.

Drag the enlargement display frame to move it to the

2

position where you want to focus.



You can also click the position where you want to focus to move
the enlargement display frame.

Click the [ON] button.

3

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



AF is executed.



When focus is achieved, the camera makes a beeping sound
and the AF point turns green.



If focus is not achieved, the AF point turns red.

45

Focusing Using Face Detection Live Mode

1D X

1D C

5D Mk III

6D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

1D X Mk II

5DS/5DS R

5D Mk IV

6D Mk II

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M501D X Mk

II

5D Mk IV

6D Mk II

80D

77D

REBEL T7i

800D

REBEL SL2

200D1D X Mk

II

5D Mk IV

6D Mk II

80D

77D

REBEL T7i

800D

REBEL SL2

200D

M50

M50

1D X Mk II

5DS/5DS R

5D Mk IV

7D Mk II

80D

REBEL T6S

760D

REBEL SL2

200D

REBEL T6i

750D

M50

Select [Face Detection Live mode] or [Face live

1

mode] from the list box.



When a face is detected, an AF point appears.



When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.



You can switch between showing and hiding the AF point by
clicking the [ ] button.

Click the [ON] button.

2

Focusing Using Face+Tracking

Select [Face detection + Tracking AF] from the

1

[Focus] list box.



When a face is detected, an AF point appears.



The AF point also tracks the face if the face moves.



When there is a face other than the face detected in the scene, a
new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.



You can set continuous AF to on/off with the [Continuous AF]
checkbox on cameras other than

shooting movies, the [Continuous AF] checkbox changes to the
[Movie servo AF] on/off checkbox. With

, the [Movie servo AF] checkbox is displayed when

shooting movies, allowing movie servo AF on/off to be selected.



With , you can select [Eye Detection AF] on/off.



You can switch between showing and hiding the AF point by
clicking the [ ] button.

. When

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index







AF is executed.
When focus is achieved, the camera makes a beeping sound

and the AF point turns green.
If focus is not achieved, the AF point turns red.
If the camera cannot detect a face, the AF point is fixed to the

center to focus.

Click the [ON] button on the [Focus] list box.

2



AF is executed.



When focus is achieved, the camera makes a beeping sound
and the AF point turns green.



If focus is not achieved, the AF point turns red.



detected, the mode changes to [FlexiZone-Multi], [Smooth zone

AF] (p.47), [FlexiZone-Single] or [Live 1-point AF] (p.45).

: If a face is not

46

Focusing Using FlexiZone-Multi & Smooth

5D Mk IV

6D Mk II

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

5D Mk IV

6D Mk II

80D

77D

REBEL T7i

800D

REBEL SL2

200D

5D Mk IV

6D Mk II

80D

77D

REBEL T7i

800D

REBEL SL2

200D

Checking the Depth of Field and Exposure

zone AF

You can check the depth of field and exposure in the [Remote Live View
window].

Introduction

Contents

This AF mode allows focus to be easily achieved on moving subjects.
You can adjust focus over a wide area, and also divide the area into
zones for focusing.

Select [FlexiZone-Multi] or [Smooth zone AF] from

1

the [Focus] list box.



An AF point appears.



You can click in the window to select an AF zone.
To cancel a selected zone, select [FlexiZone-Multi] or [Smooth
zone AF] again from the [Focus] list box.



You can set continuous AF to on/off with the [Continuous AF]

checkbox on cameras other than

. When shooting
movies, the [Continuous AF] checkbox changes to the [Movie

servo AF] on/off checkbox. With

, the [Movie servo AF] checkbox is displayed when

shooting movies, allowing movie servo AF on/off to be selected.



You can switch between showing and hiding the AF point by
clicking the [ ] button.

Click the [ON] button.



The aperture is stopped down (exposure simulation) to the
aperture set in the capture window (p.93).

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

Click the [ON] button on the [Focus] list box.

2



AF is executed.



When focus is achieved, the camera makes a beeping sound
and the AF point turns green.



If focus is not achieved, the AF point turns red.

47

Introduction

White Balance with the Remote Live View Window

You can change the white balance of an image in the [Remote Live View
window] and register the changed white balance in the camera.

Select the white balance to apply to the image.

1



The selected white balance is applied to the image displayed in
real time and you can check it in the [Remote Live View window].

Checkmark [Apply to shot images].

2

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



The selected white balance is registered in the camera as a
personal white balance and applied to images that will be taken.

48

You can display an electronic level in the [Remote Live View window] to

Displaying an Electronic Level

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

M50

Camera’s horizontal
position

Horizontal
reference

Position of camera top

Horizontal level

Vertical reference
Camera’s vertical position

Vertical level



To adjust horizontal tilt, move the camera so the camera’s horizontal
position and the horizontal reference match.



: To adjust vertical tilt, move the camera so the

camera’s vertical position and the vertical reference match.



To hide the level, click the [ ] button again.



During movie shooting, the electronic level will not be displayed.



Even when tilt is corrected, there may be a margin of error of
approx. ±1°.



If the camera is very tilted, the electronic level’s margin of error
will be bigger.

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

7D Mk II

M50

check the tilt of the camera.

Click the [ ] button in the [Remote Live View window].

1



An electronic level is displayed in the [Remote Live View window].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Check the tilt of the camera.

2



Displayed contents may differ depending on the connected camera.

Remote

Shooting

3

Preferences

4

Reference

Index

* One horizontal increment is equal to 10°, and one vertical

increment is equal to 5

°

.

49

Introduction

Changing the Aspect Ratio

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

1D X Mk II

1D X

1D C

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

As with the camera’s Live View function, it is possible to shoot with a
feeling similar to film-type medium-format/large-format cameras such as
6 x 6 cm, 6 x 4.5 cm and 4 x 5 inches. Depending on the connected
camera, there are the following differences.



For both RAW and JPEG images, aspect ratio information is only
attached with the shot image, and the image is not cropped.



You can select the two following modes.
[Add aspect ratio information]: JPEG images shot in this mode are

cropped.

[Add cropping information]: Aspect ratio information is only

attached, and the JPEG images shot
are not cropped.

With either mode, RAW images will only have aspect ratio information
attached to them, and they will not be cropped.



For a RAW image, aspect ratio information is only attached with the

shot image, and the image is not cropped. For a JPEG image, the

image is cropped.

Click the [ ] button and select the aspect ratio.

1



In the [Remote Live View window], the vertical lines of the aspect
ratio you selected are displayed.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

Move the camera and compose your picture.

2



To revert the aspect ratio to its default, click the [ ] button.

For

, select the original aspect ratio. For other cameras,

select [Off].

50

Click the [ ] button.

5DS/5DS R

5D Mk IV

5D Mk III

7D Mk II

5D Mk IV

Audio Recording Setting

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

1



The [Specify Aspect Ratio/Cropping Info] dialog box appears.

Set [Add aspect ratio information] or [Add cropping

2

information].

Move the camera and compose your picture.

3

You can set the audio recording level when shooting movies in Remote
Live View shooting.
This function can be set only when the camera is in P, Tv, Av, M, or B
shooting mode. Also refer to the pages related to “Setting the Sound
Recording” in your camera’s Instruction Manual.
Audio recording cannot be set on

.

Click the [Settings] button in the audio recording

1

area of the [Remote Live View window].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4



[Add aspect ratio information] mode crops the JPEG images
shot.



[Add cropping information] mode only attaches aspect ratio
information to the JPEG images shot without cropping them.



With either [Add aspect ratio information] or [Add cropping
information] selected, RAW images will only have aspect ratio
information attached to the shot images, and they will not be
cropped.



Only either one of [Add aspect ratio information] and [Add
cropping information] can be set. When one mode is set, the
other mode will be set to its default automatically.



default, you cannot set [Add aspect ratio information]. Set [Add
cropping information] to its default to set [Add aspect ratio
information].



Clicking the [Close] button completes the setting.

When [Add cropping information] is set to other than its



The [Recording settings] window appears.

Reference

Index

51

Specify settings.

Sound recording list box

Wind filter function

Audio recording level
slider

Level meter

1D X Mk II

5DS/5DS R

5D Mk IV

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

2

Audio Recording/Audio Recording Level

[Auto]: The audio recording level is adjusted automatically

according to the volume of the sound. When [Auto] is
selected, you can only set the Wind filter function.

[Manual]: Function for advanced users. You can adjust the audio

recording level as desired.
Drag the audio recording level slider while checking the
level meter to adjust the audio recording level. When the
volume is loud, refer to the peak hold function (approx. 3
seconds) while adjusting so that the right side of “12” on
the level meter (-12 dB) lights intermittently. Exceeding
“0” results in sound cracking.

[Disable]: Sound is not recorded.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2



Select [Auto], [Manual], or [Disable] from the list box.



When setting is completed, click the [Close] button to close the
[Recording settings] window.



An attenuator settings box appears when

connected. In conditions with much loud sound, sound cracking
may occur even when shooting with [Sound recording] set to
[Auto] or [Manual]. If there is sound cracking, it is recommended
that you checkmark the attenuator function box to enable the
attenuator function.



When is connected, you can select from [Auto],
[Disable], or [Enable] to set the attenuator.

is

Wind Filter Function

When you want to reduce the sound of the wind recorded while
shooting outdoors, checkmark the Wind filter function box to enable
the Wind filter function. It will function only when using a built-in
microphone. However, when enabled, low bass sounds are also
partially reduced, and it is recommended that you remove the
check mark from this box in locations with no wind, to disable the
Wind filter function.

Remote

Shooting

3

Preferences

4

Reference

Index

52

An image saved in your computer can be overlaid on top of the image

Overlaid Display Function

displayed in the [Remote Live View window]. As this function allows you
to accurately align angles, it is useful when shooting several images at
the same angle, such as when shooting product photos. Images loaded
from your computer are only displayed, and are not included in the shot.

Select the [Compose] tab sheet in the [Remote Live

1

View window] and click the [Open] button in
[Overlay].

Select the image you want to display as an overlay

2

and click the [Open] button.



The [Open] dialog box appears.



RAW*, JPEG, TIFF, BMP (bitmap), and GIF images can be
displayed as an overlay.

* • Only RAW images with the extension “.CR2” or “.CR3” shot

with a Canon camera can be displayed as an overlay.

• Even if the image has been adjusted with Digital Photo
Professional version 4.x, the overlaid image will be displayed
in the condition when it was shot.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference



The [Open] dialog box appears.



Even with supported image file types, the display of the image as
an overlay may not be possible.



[Show overlay image] is checkmarked, and the selected image is
displayed as an overlay in the [Remote Live View window].

Index

53

Enlarging/Reducing an Overlay Image

An image displayed as an overlay (the overlay image) can be enlarged/
reduced from 25 to 200%. Use the Enlarge/Reduce slider to set the
enlargement or reduction.

Introduction

Contents



An overlaid image (the overlay image) can be displayed
enlarged/reduced, rotated, or with its composite ratio adjusted

(p.55).

Move the camera and subject to compose your

3

picture.



You cannot use the Overlaid Display function in the [Zoom View]
window.

Drag the Enlarge/Reduce slider left or right.



The enlargement/reduction set with the Enlarge/Reduce slider is
applied to the overlaid display.



You can also set the enlargement/reduction by entering a value
directly.



You can also move the cursor over the slider, click, and then
press the <
wheel on your mouse to set the enlargement/reduction.



Clicking the [Reset] button resets the image to its default state.



> or <> key on the keyboard or use the scroll-

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

54

Rotating an Overlay Image

An image displayed as an overlay (the overlay image) can be rotated
from -180° to +180°. Use the Rotate slider to set the rotation.

Drag the Rotate slider left or right.

Setting the Composite Ratio of an Overlay
Image

The composite ratio (transparency) of an image displayed as an overlay
(the overlay image) can be set from 0 to 100%. Use the Composite
Ratio slider to set the composite ratio.

Introduction

Contents



The rotated angle set with the Rotate slider is applied to the
overlaid display.



You can also set the rotated angle by entering a value directly.



You can also move the cursor over the slider, click, and then
press the <
wheel on your mouse to set the rotated angle.



Clicking the [Reset] button resets the image to its default state.



> or <> key on the keyboard or use the scroll-

Drag the Composite Ratio slider left or right.



The composite ratio set with the Composite Ratio slider is
applied to the overlaid display.



You can also set the composite ratio by entering a value directly.



You can also move the cursor over the slider, click, and then



press the <
wheel on your mouse to set the composite ratio.



Clicking the [Reset] button resets the image to its default state.

> or <> key on the keyboard or use the scroll-

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

55

Moving an Overlay Image

An image displayed as an overlay (the overlay image) in the [Remote
Live View window] can be moved to a new position. You can also use
the cursor of your mouse to enlarge/reduce or rotate the image.

Click the [Move overlay image] button.

1

Drag the cursor of your mouse over the overlay

2

image.



The overlay image is moved to a new position.



You can drag the cursor of your mouse in the [Remove Live View
window] in the area outside the overlay image to rotate it.



You can drag the cursor of your mouse in the corners of the
overlay image to enlarge or reduce it.



Clicking the [Reset] button resets the image to its default state.

Displaying a Different Overlay Image

An image displayed as an overlay (the overlay image) can be changed
to another image.

Click the [open] button in [Overlay].

1



The [Open] dialog box appears.

Select the image you want to switch to in the [Open]

2

dialog box and click the [Open] button.



The image that was displayed changes to the selected image.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

56

Hiding an Overlay Image

Displaying Grid Lines

Hide an image displayed as an overlay (the overlay image).

Remove the check mark from [Show overlay image].

1



The overlay image is hidden.

You can display grid lines in the [Remote Live View window] in the same
way as the camera’s Live View function, to check the camera’s
horizontal/vertical alignment.

Select the [Compose] tab sheet and checkmark

1

[Show grid] in [Grid].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4



Checkmarking [Show overlay image] redisplays the overlay
image.



Grid lines are displayed in the [Remote Live View window].

Reference

Index

57

Select a display method for the grid lines from the

Displaying Guide Lines

2

[Grid] list box.

You can display guide lines in the [Remote Live View window] and
locate them anywhere for alignment of the subject.

Introduction

Contents



By selecting [Customize grid], you can set the following items.

• Number of grid blocks vertically and horizontally (2-90)

• Grid line thickness (1-10)

•Grid color

• Show/hide diagonal lines

Move the camera to check its horizontal/vertical

3

alignment.



To hide the grid lines, remove the check mark from [Show grid].

Select the [Compose] tab sheet and checkmark

1

[Show Guides] in [Guides].



Guide lines appear in the [Remote Live View window].



Guide lines cannot be displayed during enlarged display.

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

58



Drag

By clicking the [Detailed settings] button, you can set the
following items for guide lines in the dialog box that appears.

• [Color]: Click the [Choose] button and select the color of the
lines in the dialog box that appears.

• [Width]: Choose a value between 1 and 10 for the width of the
guide lines.

• [Display aspect ratio while moving guides] checkbox:
Checkmark this option to display the aspect ratio indication of
the center box formed by the guide lines when moving them.

• [Target ratio]: If the checkbox above is checkmarked, and you
change the ratio in [Target ratio], the aspect ratio of the center
box formed by the guide lines is displayed with the changed
ratio.

Clicking the [OK] button completes the setting and the dialog box
closes.

Drag the guide lines to the desired position on the

2

screen.



You can drag vertical and horizontal line intersections to change
the size of the center box formed by the guide lines and maintain
the same aspect ratio.



You can drag with the right mouse button, or hold the <Shift> key
and drag with the left mouse button to move the center box
formed by the guide lines and maintain the same aspect ratio and
size.



You can also enter values between 0.0 and 100.0 in the [1:] and
[2:] boxes in [Horizontal ( 0.0 - 100.0 )] and [Vertical ( 0.0 - 100.0 )]
to move the guide lines.



If the [Display aspect ratio while moving guides] checkbox is
checkmarked in the dialog box that appears by clicking the
[Detailed settings] button, an aspect ratio indication and the
direction toward the target ratio are displayed when moving the
guide lines.

Move and position the camera.

3



To hide the guide lines, uncheckmark [Show Guides].

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

59

When a lens mounted with Power zoom adapter PZ-E1 is attached to a

Power Zoom Operation

80D

77D

REBEL T7i

800D

REBEL SL2

200D

Variable speed mode

Constant speed mode

Zoom lever

Speed level switch

supported camera, you can use power zooming in the [Remote Live
View window].

Select the [Live View] tab and click the [PZ] button.

1



The [Power Zoom Control] window appears.

Select the mode from the [Variable speed] tab or

2

[Constant speed] tab.

Variable speed mode:
Constant speed mode:

Zoom at changeable speeds.

Zoom at a constant speed.

Use power zooming.

3

Variable speed mode

Zooming:

Move the zoom lever toward [W] to zoom to wide-angle.
Move the zoom lever toward [T] to zoom to telephoto.

Changing zoom speed levels:

You can change speeds with the speed level switch.
Setting this to [SLOW] provides a slow zoom, suitable for movie
shooting.
Setting this to [FAST] provides a faster zoom than [SLOW].

Varying the zoom speed during zooming:

You can adjust the zoom speed with the zoom lever by the amount
of its movement. Moving the lever slightly left or right provides a
slow zooming. The more you move the lever to right or left side,
the more the zoom speed increases.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



Variable speed mode is selected by default.

60

Constant speed mode

Speed level switch



If zooming stops, check the message that appears in the [Power
Zoom Control] window.



Shooting a few test movies is recommended where you will
perform zooming during movie shooting. Zooming during movie
shooting may result in recording of changes in exposure or
mechanical sound of the lens, or may cause images to be out of
focus.



For more cautions for using the power zoom adapter, refer to the
power zoom adapter instruction manual.

In constant speed mode, if the mouse cursor is in either the [Power
Zoom Control] window or the [Remote Live View window], press
<W> on the keyboard for wide angle and <T> for telephoto
zooming.

Introduction

Contents

Downloading

Images

1

Zooming:

Click the [W] button to zoom to wide-angle.
Click the [T] button to zoom to telephoto.

Changing zoom speed levels:

You can change speeds with the speed level switch.
Setting this to [SLOW] provides a slow zoom, suitable for movie

shooting.
Setting this to [FAST] provides a faster zoom than [SLOW].

Micro-adjusting zoom speed:

You can finely adjust the speed in one of 15 levels for either
[FAST] or [SLOW] speeds with the [Speed level] list box.

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

61

Shooting by Operating the Camera

Even when remote shooting is set, you can still operate the camera and
shoot – as when shooting with only the camera. Also, since the shot
images are saved to your computer’s hard disk, you can shoot large
quantities without having to worry about the capacity of the memory card.

Introduction

Contents

Display the capture window

(p.34)

.

1

Press the camera’s shutter button and take a shot.

2



The shot images are transferred to the computer, DPP starts up
automatically, and the shot images are displayed.

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

62

Shooting Movies

1D X Mk II

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

M50

1D X Mk II

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

1D X Mk II

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50



You cannot operate the camera when the [ ] button is
clicked. To operate the camera, click the [ ] button again or
close the [Remote Live View window].



You cannot shoot movies using Remote Live View function when
EU is wirelessly connected to .

6D(WG)

6D(W)

Click

Select



Displayed contents may differ depending on the connected camera.

5DS/5DS R

5D Mk III

6D Mk II

6D

77D

REBEL T6S

760D

REBEL T7i

800D

1D X Mk II

5D Mk IV

7D Mk II

REBEL SL2

200D

REBEL T6i

80D

750D

M50

Click

Select

You can control your camera from EU and shoot movies from your
computer screen. Note that you cannot shoot movies without a memory
card in your camera.

When setting the movie recording size, click [Live View/Movie
func. set.], and display the [Live View/Movie func. set.] window
before setting.

Introduction

Contents

Downloading

Images

1

Prepare for Live View shooting.

1



Follow the procedure of step 1 to step 2 for “Remote Live View
Shooting” (p.34).



On

, set your camera’s Live View shooting/Movie

shooting switch to < >.

Click the [ ] button.

2



The [Remote Live View window] appears.



On

, specify audio
recording settings as needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.51).

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

63

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

Click

Select



The following movie compression formats can be selected on

.

• ALL-I (I-only)/ALL-I (For editing)/Editing (ALL-I)
:

Compresses one frame at a time for recording.
Although the file size will be larger than with
IPB, the movie will be more suited for editing.

• IPB/IPB (Standard)/Standard (IPB)/Standard:
Compresses multiple frames at a time efficiently
for recording. Since the file size will be smaller
than with ALL-I, you can shoot longer.

• IPB (Light)/Light (IPB)/Light

:

Selectable when the movie recording format is
set to [MP4]. The movie is recorded at bit rate
lower than with IPB (Standard) resulting in a
smaller file size and compatibility with a larger
range of playback systems. Of the three
methods available, this method allows the
longest total possible movie shooting time on a
card of a given capacity.

1D X Mk II

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M501D X Mk

II

5DS/5DS R

5D Mk IV

5D Mk III

6D

7D Mk II

80D1D X Mk

II

5D Mk IV

6D Mk II

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D



• MJPG/Motion JPEG:Motion JPEG is used to compress the

movie for recording. Without any
compression between frames, each frame
is compressed at a time and recorded. The
compression rate is therefore low. Also,
since the image size is large with 4K
quality, the file size will be large.



On , you can select the
movie’s recording format.

• MOV: The movie is recorded in the MOV format (file extension:

“.MOV”). Convenient for editing with a computer.

• MP4: The movie is recorded in the MP4 format (file extension:

“.MP4”). This format is compatible with a much larger
range of playback systems than the MOV format.



On

, the following operations are unavailable when

movie digital zoom is set on the camera.

• Remote Live View display

• Focusing with AF

• Still photo shooting

• Power

zoom operation



Video Snapshot shooting on

is not available with EU.

1D X Mk II

5D Mk IV

1D X Mk II

5D Mk IV

7D Mk II

80D

80D

REBEL T6S

760D

77D

REBEL T7i

800D

REBEL SL2

200D

80D

77D

REBEL T7i

800D

REBEL SL2

200D

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50



Selectable movie recording sizes differ depending on the camera.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

64

Adjust the focus

Recording time

3

(p.42, p.44)

Introduction

.

Click the [ ] button and begin shooting.

4



At the bottom left of the [Remote Live View window], a [ ] icon
and the recording time are displayed.



Click the [ ] button again to end shooting.



When the [Remote Live View window] closes, the following
window appears if some movie files remain to be downloaded to
your computer.



After you click the [Download] button, the file names of the movie
files appear in a list.

After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and movie files will be
downloaded from the camera’s memory card to your computer.
Movie files having a check mark removed from its file name are
not downloaded. When downloading movie files to your
computer afterwards from the camera’s memory card, use the
method described on p.9 to p.13 of this Instruction Manual to
download.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

65

Prepare for Live View shooting.

1D X

1D C



The following movie compression formats can be selected on

.

•

ALL-I (I-only)

: Compresses one frame at a time for recording.

Although the file size will be larger than with IPB,
the movie will be more suited for editing.

• IPB: Compresses multiple frames at a time efficiently

for recording. Since the file size will be smaller
than with ALL-I, you can shoot longer.



• MJPG: When shooting a movie at 4K (4096 x 2160

pixels), Motion JPEG is used to compress the
movie recorded.
Each frame is compressed separately and
recorded without compression between frames.
The compression rate is therefore low. Since the
image size is large, the file size will also be large.



When the is connected and Canon Log gamma is set
on the camera, the Canon Log gamma setting icon and [ ]
(View Assist) button are displayed in the Remote Live View
window (p.96, p.97).
Canon Log gamma is a movie characteristic to attain wide
dynamic range. As a result, the image displayed in the Remote
Live View window has low contrast and is somewhat dark
compared to when a Picture Style is set.
If you click the [ ] (View Assist) button, the movie image will
be displayed in the Remote Live View window with a
conspicuous characteristic. This makes it easier to check the
angle of view, details, etc.
Note that even if you click the [ ] (View Assist) button, it will
not affect the movie recorded to the card. (The movie will be
recorded to the card with Canon Log gamma.)

1D X

1D C

1D C

1D C

1



Follow the procedure from step 1 to step 2 for “Remote Live View
Shooting” (p.34).

Introduction

Contents

Click [Live View/Movie func. set.].

2



The [Live View/Movie func. set.] window appears.

Select [Movies] for [LV func. setting], and select the

3

movie recording size from the list box.

Click the [OK] button.

4



The [Live View/Movie func. set.] window closes.

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

66

Click [Live View shoot.].

1D X

1D C

Recording time

5



The [Remote Live View window] appears.



On , specify audio recording settings as
needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.51).

Adjust the focus

6

(p.42, p.44)

Introduction



After you click the [Download] button, the file names of the movie
files appear in a list.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

.

3

7

Click the [ ] button and begin shooting.



At the bottom left of the [Remote Live View window], a [ ] icon
and the recording time are displayed.



Click the [ ] button again to end shooting.



When the [Remote Live View window] closes, the following
window appears if some movie files remain to be downloaded to
your computer.

After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and movie files will be
downloaded from the camera’s memory card to your computer.
Movie files having a check mark removed from its file name are
not downloaded. When downloading movie files to your
computer afterwards from the camera’s memory card, use the
method described on p.9 to p.13 of this Instruction Manual to
download.

Preferences

4

Reference

Index

67

Timer-controlled Shooting

Timer Shooting

Remote Interval Timer Shooting

5D Mk IV

6D Mk II

On certain types of computer, if you set a short interval between
shots and there is insufficient time to transfer and save the images,
it may not be possible to take shots at the specified interval. In this
case, set a longer interval between shots and take the shots again.

The shooting mode cannot be changed when the [Timer shooting
settings] dialog box is displayed.
Display the [Timer shooting settings] dialog box after setting the
shooting mode.

Two types of timer shooting are available where the camera
automatically takes shots at a specified time or a specified number.

Introduction

You can automatically take a shot when the specified time elapses.

Display the capture window

(p.35)

.

1

Click the [ ] button.

2



The [Timer shooting settings] dialog box appears.

Enter a delay time and click the [Start] button.

3



Enter a value between 0 seconds and 99 minutes 59 seconds in
one-second increments.



The shot is taken when the specified time elapses.

You can automatically take shots by setting the interval between shots
and the number of shots to be taken.

EOS DIGITAL cameras other than

Display the capture window

(p.35)

.

1

Click the [ ] button.

2



The [Timer shooting settings] dialog box appears.

Checkmark [Remote Interval timer shooting].

3

Enter the shooting interval and the number of shots.

4



Enter a value between 5 seconds and 99 minutes 59 seconds in
one-second increments.



The minimum number of interval shots is two. The number of
shots you can take at intervals depends on the available space
on your computer’s hard disk.

Click the [Start] button.

5



The shots are taken at the specified intervals and for the
specified number of shots.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

68

Display the capture window

5D Mk IV

6D Mk II



In [Computer control] mode, on certain types of computer, if you
set a short interval between shots and there is insufficient time to
transfer and save the images, it may not be possible to take shots
at the specified interval. In such a case, set a longer interval
between shots and take the shots again.



For cautions for using [Camera function] mode, refer to the
description regarding interval timer shooting in the camera’s
Instruction Manual.



The shooting mode cannot be changed when the [Timer shooting
settings] dialog box is displayed.
Set the shooting mode before displaying the [Timer shooting
settings].



To end interval timer shooting while in progress:
In [Camera function] mode, click the [Stop] button in the [Interval
timer] dialog box.
In [Computer control] mode, click the [Cancel] button in the [Timer
shooting settings] dialog box.

1

Click the [ ] button.

2



The [Interval timer shooting] dialog box appears.

Select the mode.

3



Select from the following 2 modes.
[Camera function] mode:
This mode uses the camera’s interval timer shooting function.
You can perform shooting at precise intervals. Shooting at short
intervals is also supported. You can also operate the camera
during interval timer shooting.
[Computer control] mode:
Performs interval timer shooting using computer.
Bulb shooting is also supported.



Click the [Camera function] or [Computer control] button.



Either settings dialog box appears.

(p.35)

Introduction



[Computer control] mode:

.

5

Specify settings by the following steps.

1) Checkmark [Remote interval timer shooting].

2) Enter the shooting interval and the number of shots.

• Enter a shooting interval between 5 seconds and 99 minutes
59 seconds in one-second increments.

• The minimum number of shots is two. The number of shots
you can set depends on the available space on your
computer’s hard disk.

Click the [Start] button.



The shots are taken at the specified intervals and for the
specified number of shots.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Specify settings.

4



[Camera function] mode:
Enter the shooting interval and the number of shots.

• Enter a shooting interval between 1 second and 99 hours 59
minutes 59 seconds in one-second increments.

• Enter the number of shots between 01 and 99. If set to 00,
there is no limit on the number of shots and shooting continues
until the interval timer stops.

Reference

Index

69

Remote Bulb Shooting

Remote Bulb Shooting

1D X

1D C

You can start/end remote bulb shooting without setting an exposure
time by clicking the [ ] button.

Introduction

Set the desired aperture.

3

Display the capture window

(p.35)

.

1

Click the shooting mode icon and select [BULB].

2



Specify the following settings for cameras other than

.

• For cameras with < B > (bulb) on the Mode dial, set to < B >.

• For cameras without < B > (bulb) on the Mode dial, set the
Mode dial to < M > (manual), and select [BULB] in the capture
window or set the camera’s shutter speed to [BULB].

Click the [ ] button.

4



The [Timer shooting settings] dialog box appears.

Enter the exposure time and click the [Start] button.

5



Enter a value between 5 seconds and 99 minutes 59 seconds in
one-second increments.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

70

You can preset the bulb exposure’s exposure time. With the bulb timer,

Setting the Bulb Timer

5DS/5DS R

5D Mk IV

6D Mk II

7D Mk II

80D

77D

you do not need to hold down the shutter button during the bulb
exposure. This reduces camera shake. The bulb timer can be set only in
the <B> (Bulb) shooting mode. It cannot be set in any other shooting
mode.

Specify settings.

3



Select [Enable].



Set the exposure time. Time can be set in a range from 00:00:00
to 99:59:59.

Introduction

Contents

Downloading

Images

1

Prepare for Live View shooting.

1



Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.34).

Select [Bulb timer settings] in the [Shooting menu].

2



The [Bulb timer settings] window appears.



If you select [Disable], the bulb timer will be OFF for the next
bulb shooting.



If 00:00:00 is set for the exposure time, the bulb timer is set to
[Disable].

Click the [OK] button.

4

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



The bulb timer is set on the camera, and the [Bulb timer settings]
window closes.

71

Flash Shooting

From EU, you can set the camera’s flash functions, as well as EX-series
Speedlite (sold separately) compatible with flash function setting, in
order to perform flash shooting.

For more details on setting items, also refer to the Instruction Manuals
provided with your EX-series Speedlite and with your camera.

Introduction

Click the [ ] button.

4

Contents

Prepare your camera and flash.

1



When using an external flash, attach it on your camera.

Connect your camera and computer, and then start

2

up EU

Click [Remote Shooting].

(p.6)

.

3

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index



The capture window appears.



The [Flash control menu] appears.

72

Click [Flash function settings].

Flash control menu



Select [Raise built-in flash] to use the built-in flash on

.



To enable the wireless function for the built-in flash on

, select [EasyWireless] or [CustWireless] in [Built-in flash] on the [Flash control menu]. To disable

the wireless function, select [NormalFiring].

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL T6i

750D

Click setting items, and select settings from the menu that appears*

Enable the wireless function, click the setting items, and then select settings
from the menu that appears*

[Wireless func.] button

Check that this box is checkmarked

Flash function settings window

The window displayed differs depending on the connected camera and flash.

*You can also use the scroll-wheel on your mouse to select settings for items in

the settings window that appears.

5



The [Flash function settings] window appears.



Displayed contents may differ depending on the connected camera.

Specify settings.

6

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

73

If the [Flash control] menu is displayed on the camera’s LCD
monitor, EU’s [Flash function settings] window automatically
closes.



You can use modeling flash by clicking the [Modeling flash]
button. You should only use modeling flash for a maximum of 10
times continuously. (For more information, refer to the Instruction
Manual provided with the flash.)



Information displayed in the [Flash function settings] window is
updated by clicking the [ ] button, so it is synchronized with
the current flash settings. (Since setting changes made with the
flash unit are not reflected in the [Flash function settings]
window, you can click the [ ] button and update the [Flash
function settings] window to match the current flash settings.)



You can name and save the flash setting as a file separate from
the image by clicking the [Save] button. You can also click the
[Load] button and load this file into EU to use it for other
shooting.



You can use flash shooting and Remote Live View shooting

(p.34) together.

However, you cannot use modeling flash during Remote Live
View shooting.



Settings that can be performed in the [Flash function settings]
window differ depending on the flash and camera.

Click the [ ] button to shoot.



For a list of [Flash function settings] window functions, see p.95.



You can also shoot using the <space> bar on the keyboard.

7

Introduction

Contents

Downloading

Images

1



The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.



When the capture window AF/MF selector is set to [AF] and the
cursor is moved to the [ ] button, AF/AE is executed (p.93).



You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.



You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

74

Editing Picture Styles Using Remote Live View Function

1D X Mk II

1D C

5D Mk IV

7D Mk II

When you finish this function and then start it up again, the
message [Continue editing from last time?] appears. You can
select [Yes] to continue editing the last Picture Style.

Select and enter required items, and then click the

5

You can start up Picture Style Editor (software for creating Picture Style
files) (hereinafter PSE) from EU and link with EU’s Remote Live View
function. By linking PSE with EU’s Remote Live View function, you can
edit a Picture Style while viewing the editing results in real time, and
adjust the image quality more efficiently while editing. Versions of PSE
compatible with this function are version 1.16.20 and later.

Follow the procedure from step 1 to step 3 for

1

“Remote Live View Shooting”

Click [Other Functions] and then [Edit Picture Style].

2



PSE starts up and the [Edit Picture Style] window (Remote Live
View window for editing Picture Styles) appears.

Edit a Picture Style using PSE.

3



For details on editing Picture Styles using PSE, refer to the
“Picture Style Editor Instruction Manual” (PDF electronic
manual).
You cannot click the [ ] button in PSE to specify colors you
want to adjust on a Remote Live View image in EU.



The results of editing a Picture Style using PSE are shown in real
time in the [Edit Picture Style] window. This allows you to edit a
Picture Style while viewing the results.



While using this function, EU’s capture window and all camera
functions are not available.

(p.34)

.

[Register] button.



After selecting [User Def.], enter information in [Caption] and
[Copyright].
(Entry in [Caption] is essential.)



The edited Picture Style is registered to the camera when you
click the [Register] button.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

After editing is completed, it is recommended that you save the
edits to your computer as a Picture Style file before going on to
step 4. Picture Styles registered to the camera cannot be extracted
and saved to your computer as Picture Style files. For details on
saving Picture Style files, refer to the “Picture Style Editor
Instruction Manual” (PDF electronic manual).

Click the [Register] button in the [Edit Picture Style]

4

window.



The [Register Picture Style] dialog box appears.

75

Registering Background Music to a Camera Memory Card

6D Mk II

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

REBEL T7

2000D

1500D

REBEL T6

1300D

REBEL T100

4000D

3000D

Register Background Music window

You can register WAV-format music files, saved to your computer, to the
camera’s memory card as background music. Registered background
music can be played together with a Video Snapshot Album or
slideshow played on the camera.

Connect your camera and computer. Start up EU and

1

click [Camera settings].



The [Camera settings] window appears.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Click [Register Background Music].

2



The [Register Background Music] window appears.



When the [EOS Sample Music] folder is installed to your
computer, the sample track appears in [Background music to
register] the first time as EOS Sample Music.



When the camera is in movie shooting mode, registering
background music is not possible.

Edit [Background music to register].

3

Adding New Music Files

Click the [Add] button, select a music file in the [Open] dialog box



that appears, and then click the [Open] button.



A music file is added to [Background music to register].



You can also directly drag and drop a music file saved anywhere
in your computer to add it to [Background music to register].



Music can be added only one track at a time.



A total of 20 tracks can be added, each up to 29 minutes 59
seconds long.

Remote

Shooting

3

Preferences

4

Reference

Index

76

Changing the Playback Order of Music Files



Select a music file in [Background music to register], and then
click the [ ] or [ ] button.



The order of the music files changes.



You can also directly drag and drop music files within the
[Background music to register] to change the order.

Deleting Music Files



Select a music file in [Background music to register], and then
click the [Remove] button.

Editing Track Names of Music Files



Select a music file in [Background music to register], click the
[Edit Track Name] button and enter a track name up to 25
characters (single-byte). Then, click the [OK] button.



The track name for the music file changes.



You can also display the [Edit Track Name] dialog box by
double-clicking a music file in the [Background music to register].

Playing Music Files

Select a music file in [Background music to register], and then



click the [Play] button.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference



The music file is deleted from [Background music to register].



The music file plays.

Index

77

Adding EOS Sample Music

Music copied with this function may not be used without permission
from the copyright holder, except for cases permitted under
applicable laws, such as for personal use.

Music files meeting the following requirements may be registered
to the camera’s memory card.

File format Music file export: WAVE (.wav, .wave)

files in linear PCM

File time limit Up to 29 min. 59 sec. per one file

File number limit Up to 20 files

Channels 2 channels



Click the [EOS Sample Music] button.



The EOS Sample Music on your computer is added to
[Background music to register].



This operation cannot be performed if EOS Sample Music is not
installed on your computer.

Click the [Close] button.

5



The [Register Background Music] window closes.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Click the [Register] button.

4



The music files in [Background music to register] are registered
(copied) to the camera’s memory card.



Music files already registered on the camera’s memory card are
overwritten as music files are registered.



Registering music files to your camera one track at a time is not
possible.

Remote

Shooting

3

Preferences

4

Reference

Index

78

Setting Web Services

5D Mk IV(WG)

6D Mk II

6D(WG)

6D(W)

80D(W)

77D

REBEL T6S(W)

760D(W)

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i(W)

750D(W)

REBEL T7

2000D

1500D

REBEL T6(W)

1300D(W)

REBEL T100

4000D

3000D

M6

M5

M3

M10

M100

M50



To use this function, the EOS Web Service Registration Tool must
be installed.



To use CANON iMAGE GATEWAY, an environment enabling
Internet access (subscription with a provider as well as installed
browser software and an in-place line connection) is required.



For version and settings information on a browser (Microsoft
Internet Explorer, etc.) for accessing CANON iMAGE GATEWAY,
check with “CANON iMAGE GATEWAY”.



Provider connection fees and transmission fees to provider
access points are incurred separately.

Connect your camera and computer. Start up EU and

1

click [Camera settings].

Introduction

How to register Web services to the camera is explained here.
You can use CANON iMAGE GATEWAY to show shot images in online

photo albums and use a variety of services. CANON iMAGE GATEWAY
is also a site that serves as a bridge for sending images wirelessly from
your camera to other Web services such as Facebook, Twitter, YouTube,
Flickr, and email.

Before registering Web services to your camera, connect to the Internet
with your computer, access the CANON iMAGE GATEWAY Web site for
your area from Canon Web site (www.canon.com/cig), and follow on­screen instructions to register as a member.

To use Web services in addition to CANON iMAGE GATEWAY, continue
by registering applicable accounts. For detailed information, refer to the
Web site for each Web service.



A computer is required for specifying settings for Web services,
including CANON iMAGE GATEWAY.



For information on countries and areas supporting CANON iMAGE
GATEWAY services, refer to Canon Web site (www.canon.com/cig).



For how to specify Web service settings with

, refer to your camera’s Instruction

Manual.



The [Camera settings] window appears.



If your camera and computer are not connected, [Web Service
Settings] is not displayed.

Click [Web Service Settings].

2



The CANON iMAGE GATEWAY login dialog box appears.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

79

Log in to CANON iMAGE GATEWAY.



When the destination is email, you can register up to 20
addresses to the camera.



When logging in to CANON iMAGE GATEWAY from the second
time onward in step 3, the [Web Service Settings] dialog box in
step 5 appears. To set Web services to use, click the [Edit Web
Services] button.



To add or change Web services, repeat the operation from step 1.

3



Enter your login name and password for CANON iMAGE
GATEWAY, and then click the [Login] button.



The [Edit Web Services] window appears.

Set Web services to use.

4



Follow on-screen instructions to set the Web services to use.



When setting of the Web services is completed, click the [Finish]
button at the bottom to close the [Edit Web Services] window.



The [Web Service Settings] dialog box appears.

Apply Web service settings to the camera.

5



Select the names of the Web services you want to set in the
[Web Services] list, and click the [ ] button at the center.



Names of Web services to be applied to the camera appear in
the [Camera] list.



You can also change the order in which Web services are
displayed in the camera’s menu by clicking the [ ] or [ ]
button in the [Camera] list.



To cancel the changes you made to the [Camera] list, click the
[Cancel] button.



Once the [Camera] list contains all the Web services you want to
set, click the [OK] button to complete.



Web service settings are applied to the camera.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

80

Registering IPTC Information

1D X Mk II

5D Mk IV

(firmware version 1.1.0 or later)

If this function for adding IPTC* information is equipped with the
camera, you can edit and register IPTC* information. IPTC information
registered on the camera can be added to shot images.

IPTC information is comment information, such as captions, credits, and
shooting location.

* International Press Telecommunications Council

Connect your camera and computer. Start up EU and

1

click [Camera settings].



The Camera settings window appears.



If your camera and computer are not connected, the [Register
IPTC information] option is not displayed.

Click [Register IPTC information].

2

Edit and register information as needed.

3

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3



The [Register IPTC information] dialog box appears.



[Register IPTC information] is displayed with current camera
settings entered.
Even if IPTC information is not set, [Author] and [Copyright]
information are displayed if they are registered in the camera.



Clicking the [Apply to camera] button sets the IPTC information
to the camera and then also sets the camera’s Custom Function
[Add IPTC information] option to [ON] and closes the [Register
IPTC information] dialog box.



Clicking the [Delete from camera] button deletes all IPTC
information registered in the camera and then also sets the
camera’s Custom Function [Add IPTC information] option to
[OFF] and closes the [Register IPTC information] dialog box.
After clicking the [Delete from camera] button, IPTC information
is not added to shot images.



You can click the [Save] button to save information displayed in
the current [Register IPTC information] dialog box as an XMP
file.



You can click the [Load] button to load IPTC information saved to
a file using this function.

Preferences

4

Reference

Index

81

4

Preferences

Introduction

You can change each of the EU functions on each tab sheet of the
preferences window to make them easier to use.

Contents

Preferences ............................................................. 83

Basic Settings.............................................................

Destination Folder ......................................................

File Name ...................................................................

Remote Shooting........................................................

Linked Software..........................................................

Time Settings..............................................................

Survey ........................................................................

83
83
84
84
85
85
86

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

82

Preferences

Basic Settings



When [Show [Select and download] screen] is selected in
[Startup Action], the viewer window (p.91) appears.



When [Show [Remote shooting] screen] is selected in [Startup
Action], the capture window (p.93) appears. (With

, the main window appears.)



When [Execute [Start automatic download]] is selected in
[Startup Action], the [Save File] dialog box (p.9) appears and
downloading to your computer begins. When all the images have
been downloaded, DPP starts up automatically and the
downloaded images are displayed in DPP’s main window.



If you remove the check mark from [Automatically display Quick
Preview window], the [Quick Preview] window will no longer
appear during Remote Live View shooting or when loading
images.

M6M5M3

M10

M100

Destination Folder



You can also specify a save destination folder by entering text
directly in the textbox for the save destination folder.



To specify a save destination folder, click the [Browse] button.
After you click the [Browse] button and specify a save destination
folder, a subfolder is created automatically below the save
destination folder you specified.



After you checkmark [Create a subfolder in this folder and save
images], a subfolder is created.



You can select the naming rule for a generated subfolder from
the list box. You can also customize the naming rule for
subfolders by clicking the [Customize] button.



If you are using the shooting date for a generated subfolder, you
can specify the format (order and style for year-month-date) and
dividing characters.

On the main window, click the [Preferences] button.

1



The [Preferences] dialog box appears.

Specify the required settings and click the [OK]

2

button.



The settings are applied to EU.

You can specify the save destination folder of images downloaded from
your camera or of images shot remotely.

Introduction

Contents

Downloading

Images

1

You can specify the operation when EU starts up.

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

83

Introduction

File Name



When specifying an image’s file name, select a naming rule for
the file from the list box. (If [Do not modify (Download Images)] is
selected, images are saved with the file name set in the camera.)
You can also customize the naming rule for files by clicking the
[Customize] button.



You can set prefix characters, number of digits for serial
numbers, and the start number individually for file names.



If you are using the shooting date in file names, you can specify
the format (order and style for year-month-date) and dividing
characters.

Remote Shooting

M6M5M3

M10

M100



If you checkmark [Rotate image], you can set a function that
rotates shot images regardless of the camera’s position during
shooting. Set the rotation angle in the capture window (p.93).



If you checkmark [Start Live View], the [Remote Live View
window] automatically appears when the camera’s Live View
starts up. (except )



Is you checkmark [Stop Live View], the [Remote Live View
window] automatically closes when the camera’s Live View ends.
If the camera’s Live View display is active when Remote Live
View ends, the camera’s Live View display also ends. (except

)



If you checkmark [Turn on camera’s LCD monitor when Live
View starts], the camera’s LCD monitor displays the image at the
same time as Remote Live View starts. (except )



If you checkmark [Change settings using mouse wheel on
[Remote Shooting] screen], you can use the scroll-wheel on your
mouse to change settings over the capture window display/
control buttons or the [Flash function settings] window.

M50

M50

M50

You can specify the file name of images downloaded from your camera
or of images shot remotely.

You can set operations performed during remote shooting.
This function cannot be used with

.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

84

Introduction

Linked Software

In the window displayed when you click the [Register] button, you
can specify the type of images to be posted when linked third-party
software is started up.

Time Settings



When you select [Notify me if the time does not match], you can
set the number of minutes, from 1 to 60 minutes, for which the
camera clock and computer clock are out of sync before you are
notified.
When you start up EU, the camera clock and computer clock are
compared. If the time difference exceeds the set number of
minutes, a notification dialog box is displayed.



When you select [Always match the computer time], the camera
is set to the computer’s time when you start up EU.

From the list box, you can select the linked software that starts up when
images are downloaded from the camera or when images are shot
remotely. Also, you can register third-party software as linked software
by clicking the [Register] button.

You can specify settings for clock time when connected to a camera.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

85

Introduction

Survey

You can change survey send settings.



Click the [Change settings] button and change settings in the
dialog box that appears.

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

86

Reference

This reference section is intended to enhance your experience using EU.
An index is provided at the end of the chapter for you to easily find
information you are looking for.

Introduction

Contents

Troubleshooting....................................................... 88

Uninstalling the Software......................................... 90

List of Viewer Window Functions............................. 91

List of Register Data Window Functions for Lens Data/

Lens Aberration Correction ..........................................

List of Capture Window Functions........................... 93

Exposure Level/AEB Level .....................................

List of Flash Function Settings Window
Functions

List of Remote Live View Window (Live View Tab) Functions
List of Remote Live View Window (Compose Tab) Functions

List of Zoom View Window Functions...................... 98

Index........................................................................ 99

About This Instruction Manual ..............................

Trademarks ..........................................................

.................................................................. 95

92

94

.... 96

.... 97

100
100

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

87

Troubleshooting

Installation could not be completed correctly

EU does not start up

6D(W)

6D(WG)

REBEL T6S(W)

760D(W)

REBEL T6i(W)

750D(W)

REBEL T7

2000D

1500D

REBEL T6(W)

1300D(W)

REBEL T100

4000D

3000D

M6M5M3

M10

M100

The card reader does not detect the SD card

EU and the camera are not communicating

If EU is not operating correctly, see the items below.



Select an administrator-level privilege ([Computer administrator],
[Administrator], etc.) as a user setting. You cannot install the software
if a user setting other than an administrator-level privilege is selected.
For detailed information on selecting an administrator-level privilege,
refer to your computer User’s Manual.



When

is connected to
a computer with an interface cable and the camera’s Wi-Fi setting is

enabled, EU cannot start up. Disable the Wi-Fi setting and re-connect

the camera and the computer.



Check that the camera’s power is turned on (p.7).



EU and the camera may not communicate normally with a cable other
than the EOS DIGITAL camera-dedicated Canon interface cable (p.6).



Connect your camera and computer directly with an interface cable.
Do not connect the camera via a hub; doing so may prevent EU and
your camera from communicating normally.



If you connect multiple USB devices (not including the mouse or
keyboard) to your computer, the camera may not communicate
normally. If the camera cannot communicate normally, disconnect
USB devices other than the mouse or keyboard from your computer.



Do not connect more than one camera to the same computer. Two or
more cameras may not operate normally.



Do not connect your camera with the computer while performing
“Linked shooting” with a WFT series Wireless File Transmitter (sold
separately). Your camera may not operate normally.



If there is insufficient charge left in the camera battery, the camera
cannot communicate with EU. Replace with a fully charged battery.
Your camera may be able to use a household power outlet by using
accessories (sold separately). For details, refer to the Instruction
Manual provided with your camera. Your computer does not supply
power to the camera through an interface cable.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference



Depending on the card reader and computer OS used, SDXC cards
might not be correctly detected. In such a case, connect your camera
and computer with an interface cable, and transfer the images to your
computer.



Click the [ ] icon on the taskbar of the desktop, select [Exit] on the
window displayed, and double-click the [EOS Utility] icon on the
desktop to start up EU.



EU does not operate correctly on a computer if its system
requirements are not met. Use EU on a computer with compatible
system requirements (p.2).



Push the plug of the interface cable all the way into the socket. Loose
connections can cause faults and malfunctions (p.6).

Index

88



Communication between EU and the camera
disconnected

A non-Canon flash does not fire during
Remote Live View shooting

If you do not perform any operation while the camera and computer
are connected, depending on the computer system, a confirmation
message may appear on the screen asking whether you wish to
continue communicating with the camera. If you do not perform an
operation while this message appears, communication with your
camera is discontinued and EU shuts down. In this case, turn the
camera’s power switch to < OFF >, then again to < ON > and start up
EU.



Do not put your computer to sleep mode while it is connected to the
camera. If your computer goes into sleep mode, never disconnect the
interface cable while your computer is still in sleep mode. Always
wake your computer up while it is still connected to the camera.
Depending on the type of computer, disconnecting the interface cable
while your computer is in sleep mode could prevent the computer
from waking up correctly. Refer to the computer User’s Manual for
more information on sleep mode.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4



When a non-Canon flash is mounted on the camera for Remote Live
View shooting, set [Silent LV shoot.] in the camera to [Disable].

Reference

Index

89

Uninstalling the Software



Click the [ ] icon on the taskbar of the desktop and select [Quit].



Before starting the software uninstallation, exit all programs you are
using.



Log in under the Administrator privileges when uninstalling the
software.



Uninstall the software according to the OS software uninstalling
method.
Uninstallation of the four software packages below is required.

• Canon Utilities EOS Lens Registration Tool

• Canon Utilities EOS Utility 2

• Canon Utilities EOS Utility 3

• Canon Utilities EOS Web Service Registration Tool



To prevent computer malfunctions, always restart your computer after
you have uninstalled the software. Also, reinstalling the software
without first restarting your computer is likely to result in computer
malfunctions.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

90

List of Viewer Window Functions

(p.11)

RAW image icon

Audio recording icon

Switches the recording media

Downloads the images to the computer

Selects the condition of the image

Deletes the
image

RAW + JPEG
image icon

Images already
transferred to computer
icon

Protect icon

Image display size

Check mark (p.11)

Exits EU

Displays the main window

Displays the [Preferences] window

Recording media
folder hierarchy

Bracketing icon

Recording time

*1

Ratings set on the camera, or Digital Photo Professional Ver. 3.9 or later
are displayed.
However, the [Reject] rating is not displayed. Also, ratings cannot be
set with EU.

*2 You can select and display the following information.

[Date/time]
[Shooting information]
[Size]
Selecting [Date/time] displays the date and time when the file was

created.

Rating icon

*1

Movie

Changes the thumbnail order

Dual Pixel RAW image
icon

Information display

*2

Show only selected
images

Invert selection

Date filter

Information display

*2

List view

Thumbnail view

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

91

List of Register Data Window Functions for Lens Data/Lens Aberration Correction

(p.20)

Displays lenses selected
in [Select a lens category]
by category*

Lens category

Displays all the categories

No. of lenses registered in the camera/No. of lenses that can be registered

Displays only the
registered lenses



Lens names displayed in the [Register lens data]/[Register lens aberration correction
data] window may be partially shortened depending on the lens type. Note that you do
not have to register correction data for an EF-M lens.



Depending on the camera to be connected, lens model names with which the check
mark cannot be removed may be displayed in the [Register lens data]/[Register lens
aberration correction data] window. This indicates that it is not necessary to register the
correction data for the respective lenses to the camera.

The window displayed differs depending on the camera to be connected.

* If is connected, the following are

also displayed (p.21).

- Download status of DLO lens data to the computer

- Registered status of DLO lens data to the camera

1D X Mk II

5D Mk IV



For information on the window for registering lens aberration correction data in the , see p.23.

M50

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

92

List of Capture Window Functions

Exposure Level/AEB Level
(See next page for details)

Image recording quality

Shutter speed

Shooting mode*

10

White balance
Metering mode

Power status*

1

Displays the viewer window (p.11, p.91)
Shows/hides the [Quick Preview] window

Number of possible shots

Drive mode

Aperture

ISO speed

Save destinations for shot images*

7

Displays the [Shooting menu] (p.28)

Displays [Flash control menu] (p.72, p.95)

Displays the [Preferences] window (p.83)

Rotates shot images*

4

Save destination for shot images

Displays the [Timer shooting settings] window

(p.68, p.70)

Displays the main window (p.7)

Displays the [Remote Live View window]

(p.38, p.96)

Shoot button*5 (p.39)

AF mode

Mirror lockup

Displays the [Set-up menu] (p.36)

AF/MF selector button*

6

Flash ready*

2

Displays the [Remote Live View window] (Movie)*8

(p.63, p.65)

Warning lamp*3

Bracketing*

9

Displays Dual Pixel RAW shooting*

11



Displayed items differ depending on the model and settings of the camera connected.



For *1 to *11 explanations, see the next page.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

93

*1When using the battery, the charge level is displayed.
*

2

Appears after flash charging is complete and the cursor is moved to
the Shoot button.

*

3

Turns green when shooting was successful. Turns red when
shooting was unsuccessful or is impossible. Also blinks during
countdown for self-timer shooting.

*

4

Each time you click the button, the shot image rotates 90 degrees.
To make this function available, checkmark [Rotate image] in
preferences ([Remote Shooting] tab sheet) (p.84).

*

5

When the AF/MF selector button is set to [AF], AF/AE is performed when
the cursor is moved to the Shoot button.

*6Even when it is set to [MF], “AF” appears in the shooting information for

the shot image.

*7You can select the destination where the images are to be saved. In

movie mode, shot movies are saved only to the camera’s memory
card.

*

8

Not displayed on .

*

9

During HDR (High Dynamic Range) shooting on

, during [HDR

Backlight Control] shooting on

, or during shooting

with Creative filter set to [HDR art standard], [HDR art vivid], [HDR

art bold], or [HDR art embossed] on , the icon is
displayed as [ ].

When [Multi Shot Noise Reduction] is set on

, the

icon is displayed as [ ].

*

10

You can set Custom shooting mode.

*

11

Displays when shooting in Dual Pixel RAW.

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

6D

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

80D

M50

5DS/5DS R

5D Mk IV

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

Exposure level adjustment

AEB level setting

Setting width 0

Maximum
setting range

Narrow setting
range 1 level

1 level brighter

Widen setting
range 1 level

Brightest exposure

1 level darker

Darkest exposure

When the AEB bracketing setting exceeds the displayable range, [ ],
[ ] marks are displayed to show there are bracketing indicators beyond
the scale.

Exposure level can be set by clicking with your mouse. If a value
outside the maximum setting range is clicked, exposure is set to the
nearest settable value.

Exposure Level/AEB Level



The display changes as follows by clicking the Exposure level/AEB
level item.



Display appears as follows if [2 shots] is set for AEB shooting

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

.

Index

94

List of Flash Function Settings Window Functions

(p.72)

Flash metering

Zoom/focal length

Sender flash ON/OFF

[Save] button

Flash exposure
compensation amount /
Flash output level*

2

Wireless function button

[Modeling flash] button

Flash mode

Wireless radio ID

[Load] button

Syncro setting*

1

Channel

Flash output level during
wireless setting*

2

/
Flash exposure
compensation amount
during wireless setting*

2

*1 1st curtain sync/ 2nd curtain sync/ Hi-speed sync
*2 Displayed information differs depending on the settings. For more details on settings,

also refer to the Instruction Manual provided with your EX-series Speedlite or camera.

Settings update button

MULTI flash frequency

MULTI flash count

Flash ratio

The window displayed differs depending on the connected camera
and flash.

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

95

List of Remote Live View Window (Live View Tab) Functions

(p.34)

Closes the window

Controllers 2

Selects the white balance

(p.48)

Enlargement display frame

Lens drive (p.43)

Checks the depth of field

(p.47)

Sets the aspect ratio (p.50)

AF point

Shows/hides the controllers 1

Controllers 1

Shows/hides the AF points

Sets the color temperature

AF mode (p.44 to p.47)

Starts/stops movie
recording

Movie recording time
Movie recording in

progress icon

Movie recording size

Frame rate

Click white balance

Show/hide electronic level

(p.49)

1D X Mk II

1D X

1D C

5DS/5DS R

5D Mk IV

5D Mk III

6D Mk II

6D

7D Mk II

80D

77D

REBEL T6S

760D

REBEL T7i

800D

M50

*1When automatic rotation is set, the [Remote Live View window] display

also rotates automatically to match the camera’s rotation when it is
detected that the camera is held vertically.

*

2

When [ ] is set to ON, the [ ] [ ] buttons cannot be used
to rotate images.

*

3

Displayed only when the is connected and Canon Log
gamma is set on the camera.

*4

Displayed only when the

is connected

and Creative filter is set on the camera.

*

5

When is connected, the [ ] and [ ] buttons are
displayed as [ ] and [ ] buttons.

1D C

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

5DS/5DS R

Recording level settings

(p.51)

Movie compression
format

Rotates the image*2

Auto rotation button*

1

Displays Canon

Log gamma setting*

3

1D C

View Assist button*

3

1D C

Display magnification*

5

Histogram display

Displays

Creative

filter settings

*4

80D

77D

REBEL T6S

760D

REBEL T7i

800D

REBEL SL2

200D

REBEL T6i

750D

M50

Power zoom button (p.60)

80D

77D

REBEL T7i

800D

REBEL SL2

200D

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

96

List of Remote Live View Window (Compose Tab) Functions

(p.53)

Opens an overlay image (p.53)

Overlay image controllers

Overlay image filename

Moves and displays the overlay image (p.56)

Enlarge/Reduce slider (p.54)

Rotate slider (p.55)

Composite Ratio slider (p.55)
Resets the overlay image (p.54 to p.56)

Grid display (p.57 to p.58)

Guides display (p.58 to p.59)

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

97

List of Zoom View Window Functions

(p.43)

Rotates the image

Selects the white balance

(p.48)

Sets the color temperature

Checks the depth of field

(p.47)

Closes the window

Controllers 2

Shows/hides the controllers 1

Moves the display position

Moves the display
position

Moves the display
position

Moves the display position

Controllers 1

AF point show/hide

AF mode (p.44 to p.47)
Lens drive (p.44)

Click white balance

Magnified display position

Display magnification

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

98

Index

A

Adjusting the Horizontal Alignment of the Camera

(Remote Live View Shooting) ............................................................. 49

Adjusting the Vertical Alignment of the Camera

(Remote Live View Shooting) ............................................................. 49

Adjusting the White Balance............................................................... 32

Applying Personal White Balance....................................................... 26

B

Basic Settings (Preferences) .............................................................. 83

Bulb Timer........................................................................................... 71

C

Capture Window ................................................................................. 93

Flash Control Menu ...................................................................... 73

Shooting Menu ............................................................................. 29

Changing the Aspect Ratio (Remote Live View Shooting).................. 50

Changing the White Balance in the Remote Live View Window

(Remote Live View Shooting) ............................................................. 48

Checking the Depth of Field and Exposure

(Remote Live View Shooting) ............................................................. 47

Connecting the Camera to Your Computer........................................... 6

D

Destination Folder Settings (Preferences).......................................... 83

Downloading All the Images in a Single Operation............................... 9

Downloading and Erasing GPS Log Files from a Camera.................. 13

Downloading Selected Images ........................................................... 10

E

Exiting the EOS Utility......................................................................... 14

F

File Name Settings (Preferences)....................................................... 84

Flash Control Menu (Capture Window)............................................... 73

Flash function settings Window .......................................................... 95

Flash shooting..................................................................................... 72

Focusing Automatically (Using AF) (Remote Live View Shooting) ..... 44

Focusing in Face Detection Live Mode (Remote Live View

Shooting) ............................................................................................. 46

Focusing in Live Mode (Remote Live View Shooting) ......................... 45

Focusing in Quick Mode (Remote Live View Shooting) ...................... 44

Focusing Manually (Remote Live View Shooting)............................... 42

Focusing Using AF .............................................................................. 44

L

Linked Software Settings (Preferences).............................................. 85

O

Overlaid Display Function (Remote Live View Shooting).................... 53

P

Power Zoom Operation ....................................................................... 60

R

Register Lens Data/Lens Aberration Correction Data Window ........... 92

Registering Background Music to a Camera Memory Card ................ 76

Registering IPTC Information .............................................................. 81

Remote Bulb Shooting......................................................................... 70

Remote Interval Timer Shooting.......................................................... 68

Remote Live View Shooting ................................................................ 34

Remote Live View Window............................................................ 38, 96

Remote Live View Window Functions ................................................. 42

Adjusting the Horizontal Alignment of the Camera ....................... 49

Adjusting the Vertical Alignment of the Camera ........................... 49

Changing the Aspect Ratio ........................................................... 50

Changing the White Balance in the Remote Live View Window... 48

Checking the Depth of Field and Exposure .................................. 47

Focusing Automatically (Using AF)............................................... 44

Focusing in Face Detection Live Mode......................................... 46

Focusing in Live Mode .................................................................. 45

Focusing in Quick Mode ............................................................... 44

Focusing Manually ........................................................................ 42

Overlaid Display Function ............................................................. 53

Remote Shooting Settings (Preferences) ............................................ 84

Introduction

Contents

Downloading

Images

1

Camera

Settings

2

Remote

Shooting

3

Preferences

4

Reference

Index

99