Canon EOS Elan 7N 33V Instruction Manual

English

INSTRUCTIONS

Thank you for purchasing a Canon product.

The EOS ELAN 7NE (DATE) / ELAN 7N / 30V (DATE) / 33V is a highperformance, AF single-lens reflex camera with Eye Control∗and seven AF points. It is suited for a wide variety of subjects and situations with fully automatic and user-controlled shooting modes. Read this instruction booklet to familiarize yourself with your new camera before taking pictures. Also read “Handling Cautions” on page 6 to prevent camera malfunction and damage.

Keep this instruction booklet handy for easy reference.

Before Using Your Camera

• Before an important shoot, be sure to take test shots to make sure the camera operates properly.

• EOS cameras have a lens mount for dedicated operation (autofocusing, exposure control, etc.) with Canon EF lenses. Using a non-Canon lens with an EOS camera may not result in proper camera or lens operation. Note that the warranty does not cover any camera malfunction or damage occurring with the use of non-Canon products.

Symbols

The Caution symbol alerts you to avoid shooting problems.

The Note symbol gives supplemental information for basic camera operation or picture-taking tips.

The Custom Function symbol indicates that there is a relevant Custom Function. For details, see “Custom Function Settings” on page 85.

∗ m Model (EOS ELAN 7NE, 30V) only

Contents

Introduction

Handling Cautions .............................6

Quick Start Guide ..............................8

Nomenclature ..................................10

Conventions Used in this Instructions

...16

Before You Start.........................17

Installing the Batteries .....................18

Checking the Battery Level..............19

Mounting and Detaching a Lens......20

Mounting a Lens..........................20

Detaching the Lens .....................20

How the Shutter Button Works.........21

5Loading and Unloading Film........22

Loading Film................................22

Checking the Film Speed ............23

Unloading Film ............................24

6Midroll Rewind .....................24

Dioptric Adjustment .........................25

Holding the Camera.........................26

Fully Automatic Shooting.........27

YFull Auto Mode ...........................28

AF-Assist beam with the Built-in Flash

...29

Programmed Image Control Modes

...30

U Portrait...................................30

ILandscape .............................30

O Close-up................................30

P Sports ....................................31

A Night Portrait..........................31

FUsing Red-eye Reduction ..........32

qUsing the Self-timer .....................33

Using the Eyepiece Cover ...............34

Imprinting the Date or Time .............35

Setting the Date and Time...........36

Replacing the Date Battery .........36

AF Modes and Metering Modes

...37

Selecting the AF Mode ....................38

One-Shot AF for Still Subjects.....39

AI Servo AF for Moving Subjects

...39

AI Focus AF for Automatic AF

Mode Switching ...........................40

3Selecting an AF Point .................41

Basic Procedure for AF Point

Selection......................................41

Automatic Selection.....................42

Manual Selection.........................42

e Eye Control Calibration...........43

Calibration Procedure..................43

Eye Control Calibration and

Operation Tips.............................46

Intelligent Eye Control .................46

Deleting Eye Control Calibration

Settings .......................................47

gUsing Eye Control.....................48

Eye Control Servo AF..................49

Tu r ning Off Eye Control...............49

Focusing Off-Center Subjects..........50

When Autofocus Fails

(Manual Focusing)..........................51

8Manual Focusing...................51

ZMetering Modes..........................52

User-Controlled Shooting.........53

S Program AE.................................54

R Shutter-Priority AE....................56

E Aperture-Priority AE .................58

Depth-of-field Preview .....................59

W Manual Exposure .......................60

Q Depth-of-field AE ....................62

Depth-of-field AE with a

Manually-Selected AF Point ........62

Depth-of-field AE with Eye Control

...64

Exposure Compensation .................67

Auto Exposure Bracketing (AEB)

...68

Canceling AEB ............................69

jAE Lock.......................................70

Bulb Exposures................................71

4Multiple Exposures ....................72

Selecting the Film Advance Mode

...73

D Setting the ISO Film Speed.....73

9Silencing the Beeper...................74

bLCD Panel Illumination................74

Mirror Lockup...................................75

KWireless Remote Control...............76

Using the Remote Switch ................76

Flash Photography....................77

Using the Built-in Flash....................78

In a Basic Zone Mode .................78

In a Creative Zone Mode.............78

Flash Exposure Compensation

...

Using an EOS-dedicated Speedlite

...81

Using an EX-series Speedlite .....81

Using an EZ/E/EG/ML/TL-series

Speedlite .....................................81

Custom Functions (C.Fn) .........83

GSetting a Custom Function........84

Custom Function Settings................85

Reference ...................................89

Basic Photography Terms ................89

Feature Availability Table .................91

AE Lock Effects ...............................92

AF Mode and Film Advance

Mode Combination...........................92

Program Line ...................................93

Troubleshooting Guide.....................94

Major Specifications.........................95

Index................................................98

Handling Cautions

Camera Care and Storage

• The camera is a precision instrument. Do not drop it or subject it to physical shock.

• The camera is not waterproof and should not be used in wet conditions or underwater. If the camera gets wet, take it to your nearest Canon dealer as soon as possible. If small amounts of water splash onto the camera, wipe it with a clean dry cloth. If the camera is exposed to salty air, wipe it thoroughly with a slightly damp cloth.

• Do not leave the camera in places prone to excessive heat such as in a car on a sunny day. Excessive heat can cause the camera to malfunction.

• The camera contains precision electronic circuitry. Never attempt to disassemble the camera.

• Use only a blower brush to blow away any dust on the lens, eyepiece, mirror, focusing screen, film compartment, etc. Do not clean the camera body or lens with any cleaner containing an organic solvent. For stubborn dirt, consult your nearest Canon dealer.

• The shutter cur tains are extremely thin. Use only a blower to clean them. Be careful not to blow air too forcefully on the shutter curtains. The shutter curtains can be easily deformed or damaged. Also, when loading and unloading film, be careful not to touch the shutter curtains.

• Do not touch the electrical contacts with your fingers. Otherwise corrosion may develop on the contacts, resulting in improper camera operation.

• If the camera is not to be used for an extended period, remove the batteries. Store the camera in a well-ventilated, cool, dry place. During storage, press the shutter button once in a while to release the shutter a few times.

•Avoid storing the camera in a laboratory, cabinet, etc., where corrosive chemicals are present.

• If you have not used the camera for some time or if there is an important shoot, have the camera checked by your Canon dealer beforehand, or check for yourself that the camera components are working properly.

LCD Displays

LCD displays operate more slowly at low temperatures, and may appear dark at high temperatures. The display will return to normal at room temperature.

Batteries

• Before installing the batteries, wipe the battery contacts to remove any fingerprints and smudges. This is to prevent faulty connections and corrosion.

•Never disassemble or recharge the batteries. Also, never store a battery in high-temperature places or short circuit the battery contacts or toss a battery into a fire.

• Although the batteries work well even at low temperatures, battery performance may decline slightly at freezing temperatures. In such a case, keep spare batteries warm in a pocket, etc., and use and warm the batteries alternately.

How Low Battery Levels Affect Camera Operation

On the LCD panel, if the <r> icon blinks or it is not displayed, a proper exposure can still be obtained as long as the shutter releases. However, when the battery level is low, the film advance and auto rewind might stop midway or not work at all and the <r> icon may blink on the LCD panel. After the batteries are replaced with new ones, film advance will be possible and film rewind can resume by pressing the <6> button.

Lens Electrical Contacts

After detaching the lens from the camera, put on the lens caps or put down the lens with the rear end up to avoid scratching the lens surface and electrical contacts.

Contacts

Quick Start Guide

Install the batteries.

Refer to the battery orientation diagram on the battery chamber cover, and insert two CR123A lithium batteries as shown. (p.18)

Attach a lens.

Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. (p.20)

Load the film.

Align the edge of the film leader with the orange mark on the camera and close the camera back until it snaps shut. (p.22)

• The film will advance to the first frame.

Focus the subject.

Aim the AF points on the main subject and press the shutter button halfway to autofocus. (p.21)

• Under low-light or backlit conditions, the built-in flash will pop-up and fire automatically. (p.78)

–

On the lens, set the focus mode switch to <AF>. (p.20)

Turn the Mode Dial to <Y> (Full Auto).

Keep pressing the Mode Dial’s lock button while turning the dial. (p.28)

Take the picture.

Press the shutter button completely to take the picture. (p.21)

Unload the film.

At the end of the roll, the film rewinds automatically. Open the camera back to remove the film cartridge. (p.24)

Nomenclature

• Reference page numbers are in parentheses.

• The camera controls are indicated as icons in brackets < >.

Built-in flash / AF-assist beam (p.78/29)

Red-eye reduction lamp / Self-timer

/ Remote control lamp (p.32/33/76)

AF mode dial (p.15, 38)

Remote control sensor (p.76)

Hot shoe (p.81)

**Eye Control switch

(p.15, 43, 48)

Shutter button

(p.21)

Grip / Battery compartment (p.18)

Flash-sync contact

Dioptric adjustment knob (p.25)

Strap mount (p.17)

Lens release button

(p.20)

Body cap (p.20)

<l> Main Dial (p.16)

Mode Dial (p.14)

LCD panel (p.12)

LCD panel illumination button

(p.74)

Depth-of-field preview button (p.59)

Film advance mode lever (p.15, 33, 73)

Mode Dial lock release button (p.14)

Lens lock pin

Lens mount

Contacts (p.7)

Mirror (p.75)

Back cover release lever (p.22)

Quick Control Dial (p.16)

Tr ipod socket

<0> Function button (

p.23, 32, 68, 72,

73, 74, 80

)

Eyecup (p.25, 34)

Battery compartment cover release lever (

p.18)

Viewfinder eyepiece

<6>Midroll rewind button (

p.24)

Film check window

<3>AF point selection button (

p.41, 87)

*Date display panel

(p.35)

<Z> Metering mode button (p.52)

*<q>button (p.35)

*<6> button (p.36)

*<7> button (p.36)

Quick Control Dial switch (p.16)

Remote control terminal

(p.76)

<w> AE lock (p.70) / ***FE lock / Custom Function setting button (p.84)

<h> AF point selection key (p.41)

*DATE Model only ** m Model only *** With an EX-series Speedlite.

Nomenclature

LCD Panel

<8> Manual focus

AF point mark

<5> Film mark

Exposure level indicator

Exposure compensation amount

AEB level

Flash exposure compensation amount Red-eye reduction lamp-on indicator Film transport indicator

Battery level mark

Frame counter

(E - A)

Multiple-exposure setting (E - I) Self-timer operation (O - E) Remote control operation (R - E)

Aperture value

(Q - V)

Red-eye reduction setting (W, E) Beeper setting

(W, E)

AEB amount (Z - C) DEP points

(E, R)

Custom Function setting

(W - Y)

**Calibration No.

(E - Y)

Shutter speed

(D - K, y)

Depth-of-field AE (

ISO film speed (U - F) Custom Function No. (

p - P)

**Calibration (

***FE lock (o)

<D>

ISO film speed

<L> AEB

<7> Function pointer

<K> Remote control mark

Metering mode

Z Evaluative metering X Partial metering C Center-weighted

averaging metering

<9> Beeper

<F>

Red-eye reduction

<a> Flash exposure

compensation

<4>

Multiple exposures

<V> Custom Function

** m Model only *** With an EX-series Speedlite.

• The actual display will show only the applicable items.

Viewfinder Information

AF points (Superimposed display for 7 AF points)

<j> AE lock /

***FE lock AEB in progress

<M> Flash-ready

***Improper FE lock warning

Shutter speed (D〜K, y) ***FE lock (o)

Focusing screen

<N> ***High-speed sync

(FP flash)

Aperture value (Q - V)

Exposure level indicator

Exposure compensation amount AEB level

Red-eye reduction lamp-on indicator

<a>

Flash exposure compensation

<m> **Eye Control

<n> Focus confirmation

light

**Calibration indicator (g

- Y, h - Y)

Depth-of-field AE indicator (rE

, R)

Nomenclature

Custom Function Set

2OFF

Full Auto

Mode Dial lock release button

Mode Dial

• The dial has modes in two zones.

• The dial is locked when it is set to <2>. To release the lock, hold

down the Mode Dial lock release button and turn the dial.

Basic Zone

Fully automatic mode where the camera takes care of everything.

Y : Full Auto (p.28) Basically, all you do is point and shoot.

Image Zone (p.30)

Fully automatic modes for a particular subject.

U :Portrait I : Landscape O :Close-up P : Sports A : Night Portrait

Creative Zone

Semi-automatic and manual modes enable you to take control of the camera to obtain the desired result.

S : Program AE (p.54) R : Shutter-priority AE (p.56) E : Aperture-priority AE (p.58) W : Manual exposure (p.60) Q:Depth-of-field AE (p.62)

Custom Function Set

G : Custom Function (p.83)

2 : OFF

AF Mode Dial

ONE SHOT AF (p.39)

AI FOCUS AF (p.40)

AI SERVO AF (p.39)

Eye Control OFF (p.49)

Eye Control ON (p.48)

Calibration (p.43)

Self-timer / Remote control mode

(p.33, 76)

Continuous (p.73)

Single-frame (p.73)

Eye Control Switch (m Model only)

Film Advance Mode Lever

Conventions Used in this Instructions

• The <l> icon indicates the Main Dial.

• All the operations described in this booklet assume

that the Mode Dial is not set to <2>. Before proceeding with any operation, turn the Mode Dial to a picture-taking mode by pressing the lock button and turning the dial.

• The icon indicates the Quick Control Dial.

• The icon indicates the Quick Control Dial switch. Operations with the dial assume that the switch is already set to <1>. Be sure it is set to <1>.

• The <h> icon indicates the AF point selection key.

• The camera control icons and markings used in this booklet correspond to the actual icons and markings found on the camera.

• Reference page numbers are in parentheses.

• The

★

symbol indicates that the respective feature can be used only in

Creative Zone modes (S, R, E, W, Q).

• In this instruction booklet, a Canon EF 28-105mm f/3.5-4.5 lens is used for example purposes.

• The procedures explained in this booklet assume that the Custom Functions are set to the default settings.

• The (0) and (1) icons indicate that the respective function remains in effect for 4 and 6 sec. respectively after the button is released.

∗ This instruction booklet includes Eye Control instructions. Ignore those

instructions if your camera EOS ELAN 7N/33V does not have Eye Control.

Before You Start

Attaching the Strap

Pass the end of the strap through the camera’s strap mount from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to make sure it does not slip out of the buckle.

• The eyepiece cover is also attached to the strap. (p.34)

This chapter explains a few preliminary steps and basic camera operations.

Eyepiece cover

Installing the Batteries

The camera uses two lithium CR123A (or DL123A) batteries.

Open the battery compartment cover.

•

Slide the release lever as shown by the arrow and open the cover.

Install the batteries.

•

Make sure the battery contacts (+ and –) are properly oriented as shown.

•

Do not mix old and new batteries.

Close the battery compartment cover.

•

Press the cover until it snaps shut.

For places where CR123A (or DL123A) batteries may not be easily available, take spare batteries with you. Also carry spare batteries for extended shooting sessions.

∗ In the Americas, batteries are not included with the camera.

Checking the Battery Level

Check the battery level after replacing the batteries and before using the camera.

• The battery life shown above is based on Canon’s testing conditions with new batteries.

• Figures in parentheses apply when the Eye Control switch is <1>.

Battery Life (With 24-ex. rolls)

Turn the Mode Dial to a shooting mode.

•

Hold down the dial’s lock release button while turning the dial.

The camera will then turn on and the LCD panel will display one of the following battery level mark:

: Battery level OK.

: The battery level is low. Keep

spare batteries handy.

: The batteries will soon be

completely exhausted.

: Replace the batteries.

Temperature 0% Flash Use 50% Flash Use 100% Flash Use

At 20˚C 125 (115) rolls 38 (33) rolls 19 (17) rolls

At –20˚C 70 (65) rolls 20 (19) rolls 10 (9) rolls

• If nothing is displayed on the LCD panel, the batteries may have been installed incorrectly. Take out the batteries and install correctly.

• If you often press the shutter button halfway for a prolonged period or just autofocus without taking a picture, the battery life will be affected.

• When not using the camera, set the Mode Dial to <2>.

Mounting and Detaching a Lens

Remove the caps.

•

Remove the rear lens cap and the camera body cap.

Mount the lens.

•

Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place.

On the lens, set the focus mode switch to <AF>.

•

If the focus mode switch is set to <MF>, autofocus will not operate.

Remove the front lens cap.

Mounting a Lens

Detaching the Lens

While pressing the lens release button, turn the lens as shown by the arrow.

•

Tu rn the lens until it stops, then detach it.

•Keep the removed caps where you will not lose them.

•<AF> stands for “Auto Focus,” and <MF> stands for “Manual Focus.”

• An EF-S lens cannot be attached to the camera.

Red dots

How the Shutter Button Works

If an Extender (sold separately) is used and the maximum aperture (the lowest f/number) of the lens becomes smaller than f/5.6, autofocusing will not operate.

The shutter button has two stages.You can press it down halfway or fully. The two levels of shutter button operation are as follows:

When it is pressed halfway:

Pressing the shutter button down halfway activates autofocusing (AF) and automatic exposure (AE) and the shutter speed and aperture value are set.

The exposure (the combination of shutter speed and aperture value) appears on the LCD panel and in the viewfinder (0).

When it is pressed fully:

The shutter is released to take the picture and the film advances by one frame.

• After pressing the shutter button halfway, wait a moment before pressing it completely to take the picture. If you press the shutter button completely at one stroke or right after pressing it halfway, it will take a moment before the picture is taken.

• Camera movement during the moment of exposure is called camera shake. Camera shake can cause blurred pictures.To prevent blurred pictures due to camera shake:

· Hold the camera steady.

· Use your finger tip to touch the shutter button, grasp the camera with your

entire right hand, then press the shutter button gently.

• If the AF Mode Dial has been set to <5>, the focus confirmation light <n> will not light.

• If the AF Mode Dial has been set to <5> and automatic AF point selection is set (p.42), the AF point will not flash in red.

5Loading and Unloading Film

Loading Film

When you load the film, it advances automatically to the first frame.With DX-coded film, the camera automatically sets the film’s ISO speed.

Open the back cover.

•

Slide down the back cover release lever and open the back.

Turn the Mode Dial to any setting except <2>.

•

Hold down the dial’s lock release button while turning the dial.

Insert the film cartridge at a slight angle.

Pull the edge of the film leader to the orange mark on the camera.

•

Hold down the film cartridge while pulling out the film leader.

•

If you pull out the film leader too much, rewind it back into the film cartridge.

Close the back cover.

•

Close the back cover until it snaps shut.

The film will advance to frame 1 automatically.

While the film advances, the ISO speed will be displayed on the LCD panel.

When the initial film advance ends, the <5> icon and frame counter of “E” will be displayed on the LCD panel.

Wrong

Orange mark

If the film is not loaded properly, the <5> icon will blink on the LCD panel and the shutter will not work. Reload the film properly.

• The shutter curtains have been manufactured with very high precision. Never touch them with your fingers. When loading film, do not touch or damage the curtains with your fingers or film.

• In hot and humid environments, do not remove the film packaging until you are ready to load the film.

• Infrared film cannot be used with this camera.

The camera reads the film cartridge’s DX code and sets the film speed automatically within ISO 25 - 5000.

• Set the Mode Dial to a Creative Zone mode.

Checking the Film Speed

Move the <7> arrow to the <D> icon.

•

Look at the LCD panel and press the <0> button to move the arrow. (1)

The current film speed is displayed.

If you want to set a film speed different from the DX-coded film speed or if the film cartridge is not DX-coded, see “Setting the ISO Film Speed” on page 73.

C.Fn-03-1 can prevent the film speed from being set automatically with the DX code. (p.85)

5Loading and Unloading Film

During film rewind, the LCD panel will indicate the film rewinding and the frame count will count down.

The film rewind stops automatically.

•

Check that the <5> icon is blinking, then open the camera back and take out the film.

After the film’s last frame is exposed, the camera rewinds the film automatically.

Unloading Film

To rewind the film in midroll, follow the procedure below.

6Midroll Rewind

Press the <6> button.

Film rewind will begin.

The film rewind stops automatically.

•

Check that the <5> icon is blinking, then open the camera back and take out the film.

During film rewind, pressing the <6> button toggles between high-speed and low-speed (silent) rewind.

•C.Fn-01-1 can make the film rewind faster. (p.85)

•C.Fn-02-1 can leave out the film leader when the film rewind ends. (p.85)

Dioptric Adjustment

If the dioptric adjustment knob still cannot make the viewfinder look clear, use a Dioptric Adjustment Lens Ed (10 types sold separately).

By adjusting the diopter, eyeglass wearers will not need their eyeglasses to see a sharp viewfinder image. The camera’s adjustable dioptric range is –2.5 to +0.5 dpt.

Remove the eyecup.

•

While grasping both sides at the bottom of the eyecup, slide it upward to remove.

Turn the dioptric adjustment knob.

•

Tu rn the knob left or right so that the AF points in the viewfinder look sharp.

•

The illustration shows the knob at the standard setting (–1 dpt).

Reattach the eyecup.

Holding the Camera

• Firmly grasp the camera grip with your right hand, and press your both elbows lightly against your body.

• Hold the lens at the bottom with your left hand.

• Press the camera against your face and look through the viewfinder.

•To maintain a stable stance, place one foot in front of the other instead of lining up both feet.

Horizontal shooting Vertical shooting

The camera automatically senses whether it is in the horizontal or vertical position. The camera orientation sensor will make a small sound when you switch to vertical or horizontal shooting.

To avoid taking blurred pictures, hold the camera steady to minimize camera shake.

Fully Automatic Shooting

Turn the Mode Dial to <Y>, , , <O>, , or <A>.

• The picture-taking procedure is

the same as with the “<Y> Full Auto mode” on page 28.

• The settings automatically set by the Basic Zone modes are shown in the “Feature Availability Ta ble” on page 91.

This chapter describes how to use the camera’s Basic Zone modes <Y> <O> <A> for quick and easy shooting. In these modes, all you do is point and shoot. Also, these modes override the camera’s <l> and AF Mode dials, film advance mode lever (except ), and buttons (except <

> <6> and the shutter button). This is to

prevent spoiled shots caused by accidental operation of camera controls.

YFull Auto Mode

All you do is point the camera and press the shutter button. Everything is automatic so it is easy to photograph any subject. With seven AF points to focus the subject, you just point and shoot.

Turn the Mode Dial to <Y>.

Aim any of the AF points on the subject.

•

The main subject, as determined by the camera, will be focused by one of the AF points.

•

To focus a subject not covered by any of the AF points, see “Focusing OffCenter Subjects” on page 50.

Focus the subject.

•

Press the shutter button halfway to focus.

When necessary, the built-in flash will pop up automatically.

The AF point that achieves focus will flash in red. The beeper will also sound and the focus confirmation light <n> in the viewfinder will light.

AF point

Check the exposure setting.

The shutter speed and aperture value will be set automatically and displayed in the viewfinder and on the LCD panel. (0)

Aperture value

AF point mark

Shutter speed

Under low-light conditions, the built-in flash fires a brief burst of flashes when you press the shutter button halfway. This is to illuminate the subject to enable easier autofocusing.

• The AF-assist beam does not function in the modes.

• The built-in flash’s AF-assist beam is effective up to about 4 meters/13.1 feet.

• In the Creative Zone modes, if the built-in flash is popped up, the AF-assist light will emitted when necessary.

Take the picture.

•

Compose the shot and press the shutter button fully.

• When focus is achieved, the autofocus and auto exposure setting will also be locked.

• If the focus confirmation light <n> blinks, the picture cannot be taken. (p.51)

• Out of the seven AF points, the one covering the closest subject is selected automatically to achieve focus.

• If multiple AF points flash in red simultaneously, it indicates that all those AF points have achieved focus.

• In the Basic Zone modes (except ), the built-in flash will pop up and fire automatically in low-light or backlit conditions.To retract the flash, push it back down.

• If you want to zoom, do it before focusing. Turning the zooming ring after achieving focus may throw off the focus.

• If the built-in flash’s pop-up operation is obstructed, the <r> icon will blink on the LCD panel. Press the shutter button halfway to resolve the problem.

AF-Assist beam with the Built-in Flash

Programmed Image Control Modes

This mode blurs the background to make the human subject stand out.

•

Holding down the shutter button executes continuous shooting.

•

For better background blur, use a telephoto lens and fill the frame with the subject or have the subject stand closer to the camera.

This automatically sets the AF mode to <4>, the film advance mode to <H>, and the metering mode to <Z>.

Select a shooting mode to suit the target subject, and the camera will be set to obtain the best results.

This is for wide scenic views, night scenes, etc.

•

Using a wide-angle lens will further enhance the depth and breadth of the picture.

This automatically sets the AF mode to <4>, the film advance mode to <J> (single-frame shooting), and the metering mode to <Z>.

Portrait

Landscape

Use this mode to take close-up shots of flowers, insects, etc.

•

As much as possible, focus the subject at the lens’ closest focusing distance.

•

To obtain a larger magnification, use the telephoto end of a zoom lens.

•

For serious close-up shots, optional EOSdedicated macro lenses are recommended.

This automatically sets the AF mode to <4>, the film advance mode to <J> (single-frame shooting), and the metering mode to <Z>.

Close-up

+ 70 hidden pages