Canon EOS 70D Basic Manual

EOS 70D (W)
EOS 70D (N)
* The EOS 70D (N) does not have the Wi-Fi functions explained in this manual.
Basic Instruction Manual
This basic manual covers only the most basic operations. For other features and more details, see the Camera Instruction Manual pdf le in the CD-ROM.
E
Introduction
COPY
The EOS 70D (W/N) is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 20.2 effective megapixels, DIGIC 5+, high-precision and high-speed 19-point AF (all cross-type focusing), approx. 7.0 fps continuous shooting, Live View shooting, Full High-Definition (Full HD) movie shooting, and Wi-Fi function*. The camera is highly responsive to any shooting situation at any time, provides many features for demanding shots, and expands shooting possibilities with various system accessories.
* The EOS 70D (N) does not have the Wi-Fi function.
Refer to This Manual while Using the Camera to Further Familiarize Yourself with the Camera
With a digital camera, you can immediately view the image you have captured. While reading this manual, take a few test shots and see how they come out. You can then better understand the camera. To avoid botched pictures and accidents, first read the “Safety Warnings” (p.159-161) and “Handling Precautions” (p.14, 15).
Testing the Camera Before Use and Liability
After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded images or copyrighted music and images with music in the memory card for anything other than private enjoyment. Also be aware that certain public performances, exhibitions, etc., may prohibit photography even for private enjoyment.
2
Compatible Cards
COPY
The camera can use the following cards regardless of capacity:
• SD memory cards
• SDHC memory cards*
• SDXC memory cards*
* UHS-I cards supported.
Cards that Can Record Movies
When shooting movies, use a large-capacity card with a fast reading/ writing speed as shown in the table.
Compression Method (p.137) Card
IPB 6 MB/sec. or faster
ALL-I (I-only) 20 MB/sec. or faster
If you use a slow-writing card when shooting movies, the movie may
not be recorded properly. Also, if you play back a movie on a card with a slow reading speed, the movie may not play back properly.
If you want to shoot still photos while shooting a movie, you will need
an even faster card.
To check the card’s reading/writing speed, refer to the card
manufacturer’s Web site.
In this manual, “card” refers to SD memory cards, SDHC memory cards, and SDXC memory cards. * The camera does not come with a card for recording images/
movies. Please purchase it separately.
3
Item Check List
COPY
Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.
Battery Pack
Camera
(with body cap)
Wide Strap
EW-EOS70D
* Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a
power cord.)
The Instruction Manuals and CD-ROMs provided are listed on the next page. If you purchased a Lens Kit, check that the lenses are included. Depending on the Lens Kit type, a lens instruction manual may also be
included.
Be careful not to lose any of the above items.
LP-E6
(with protective cover)
Interface Cable
Battery Charger
LC-E6/LC-E6E*
4
Instruction Manual and CD-ROMs
COPY
The instruction manual consists of booklets and electronic manuals (PDF files on the CD-ROM). Basic operations are explained in the
booklets. For detailed instructions on all functions and operations, see the detailed version manuals on the CD-ROM.
Camera Basic
Instruction Manual
(this booklet)
Quick Reference Guide
* Not provided with the EOS 70D (N).
The Basic Instruction Manual explains the basic procedures and features. For detailed instructions, see the Camera Instruction Manual CD-ROM.
Camera Instruction Manual CD-ROM
Contains the following manuals in PDF:
• Camera Instruction Manual (Detailed version)
• Wi-Fi Function Instruction Manual (Detailed version)
• Quick Reference Guide Instructions for viewing the Camera Instruction Manual CD-ROM are on page 150.
Software CD-ROM (EOS DIGITAL Solution Disk)
Contains various software. For outlines and installation procedure of the software, see pages 154-156.
Software Instruction Manual CD-ROM
Contains software manuals in PDF. Instructions for viewing the Software Instruction Manual CD-ROM are on page
Wi-Fi Function
Instruction Manual*
(Basic)
Wi-Fi Cautions*
157
.
5
Quick Start Guide
COPY
1
2
Insert the battery (p.26).
To charge the battery, see page 24.
Insert a card (p.27).
With the card’s label facing
toward the back of the camera, insert it into the card slot.
White index Red index
3
4
5
6
Attach the lens (p.36).
Align the lens’ white or red mount
index with the camera’s mount index of the same color.
Set the lens focus mode switch to <f> (p.36).
Set the power switch to <1>, then set the Mode Dial to <A> (Scene Intelligent Auto)
Turn the Mode Dial while holding down the lock release button at the center.
All the necessary camera settings
will be set automatically.
(p.66).
6
COPY
7
8
9
Quick Start Guide
Flip out the LCD monitor (p.30).
When the LCD monitor displays the
date/time/zone setting screens, see page 33.
Focus the subject (p.41).
Look through the viewfinder and
aim the viewfinder center over the subject.
Press the shutter button halfway.
The camera will focus the subject.
If necessary, the built-in flash will be
raised.
Take the picture (p.41).
Press the shutter button completely
to take the picture.
Review the picture (p.56).
The captured image will be
displayed for 2 sec. on the LCD monitor.
To display the image again, press
the <x> button (p.140).
To shoot while looking at the LCD monitor, see “Live View
Shooting” (p.119).
To view the images captured so far, see “Image Playback” (p.140). To delete an image, see “Erasing Images” (p.147).
7
Conventions Used in this Manual
COPY
Icons in this Manual
<6> : Indicates the Main Dial. <5> : Indicates the Quick Control Dial. <9> <V> <U> : Indicates the Multi-controller and the push
direction. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that the corresponding function
remains active for 4 sec., 6 sec., 10 sec., or 16
sec. respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s but tons, dials,
and settings correspond to the icons and markings on the camera and on the LCD monitor.
3 : Indicates a function that can be changed by pressing the
<M> button and changing the setting.
M : When shown on the upper right of a page, it indicates that
(p.**) : Reference page numbers for more information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is set to <1> and the <R> switch is set down (Multi function lock released) (p.31, 44).
It is assumed that all the menu settings and Custom Functions are
set to their defaults.
The illustrations in this manual show the camera attached with the
EF-S18-135mm f/3.5-5.6 IS STM lens as an example.
the function is available only in the Creative Zone modes (p.20).
: Warning to prevent shooting problems. : Supplemental information. : Tips or advice for better shooting. : Problem-solving advice.
8
Chapters
1
4
6
COPY
For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.
Introduction
Getting Started
Basic Shooting
2
Setting the AF and Drive Modes
3
Image Settings
Advanced Operations
5
Shooting with the LCD Monitor
Shooting Movies
7
Image Playback
8
Viewing the CD-ROM Instruction Manuals /
9
Downloading Images to Your Computer
(Live View Shooting)
2
23
65
87
97
109
119
133
139
149
9
Contents
COPY
Introduction 2
Compatible Cards......................................... ....................................3
Item Check List.................................................................................4
Instruction Manual and CD-ROMs................................................... 5
Quick Start Guide............................................................................. 6
Conventions Used in this Manual..................................................... 8
Chapters........................................................................................... 9
Handling Precautions..................................................................... 14
Nomenclature................................................................................. 16
Getting Started 23
1
Charging the Battery ......................................................................24
Installing and Removing the Battery...............................................26
Installing and Removing the Card.................................................. 27
Using the LCD Monitor...................................................................30
Turning on the Power.....................................................................31
Setting the Date, Time, and Zone..................................................33
Selecting the Interface Language...................................................35
Attaching and Detaching a Lens ....................................................36
Lens Image Stabilizer..................................................................... 39
Basic Operation.............................................................................. 40
Q Quick Control for Shooting Functions....................................... 46
3 Menu Operations..................................................................48
d Using the Touch Screen............................................................. 50
Before You Start............................................................................. 53
Displaying the Grid.........................................................................58
Q Displaying the Electronic Level...............................................59
Feature Guide and Help.................................................................63
10
Basic Shooting 65
COPY
2
A Fully Automatic Shooting (Scene Intelligent Auto)...................66
A Full Auto Techniques (Scene Intelligent Auto).........................69
7 Disabling Flash.........................................................................71
C Creative Auto Shooting.............................................................72
8: Special Scene Mode.............................................................75
2 Shooting Portraits......................................................................76
3 Shooting Landscapes................................................... .... ... .....77
4 Shooting Close-ups....................................................................78
5 Shooting Moving Subjects........................................................79
6 Shooting Night Portraits (With a Tripod)....................................80
F Shooting Night Scenes (Handheld)............................................81
G Shooting Backlit Scenes............................................................82
Q Quick Control.......................... .... ... ........................................... .84
Setting the AF and Drive Modes 87
3
f: Selecting the AF Operation.....................................................88
S Selecting the AF Area...............................................................91
MF: Manual Focus..........................................................................94
i Selecting the Drive Mode..........................................................95
j Using the Self-timer...................................................................96
Contents
11
Contents
COPY
Image Settings 97
4
Setting the Image-Recording Quality.............................................98
i: Setting the ISO Speed.........................................................100
A Selecting a Picture Style......................................................101
Setting the White Balance............................................................102
Auto Correction of Brightness and Contrast................................. 103
Setting Noise Reduction............................................................... 104
Highlight Tone Priority..................................................................106
Lens Peripheral Illumination / Chromatic Aberration Correction .. 107
Advanced Operations 109
5
d: Program AE............................................................................110
s: Shutter-Priority AE....................................... .... ... .................. 111
f: Aperture-Priority AE.............................................................112
a: Manual Exposure...................................................................113
Setting Exposure Compensation..................................................114
h Auto Exposure Bracketing (AEB)...........................................115
A AE Lock................................. .................................................. 116
D Using the Built-in Flash............................................................. 117
Shooting with the LCD Monitor (Live View Shooting) 119
6
A Shooting with the LCD Monitor..............................................120
Using AF to Focus (AF Method)...................................................123
x Shooting with the Touch Shutter ............................................129
MF: Focusing Manually................................................................ 130
12
Shooting Movies 133
COPY
7
k Shooting Movies.....................................................................134
Setting the Movie Recording Size.................................................137
Image Playback 139
8
x Image Playback......................................................................140
H Searching for Images Quickly.................................................141
u/y Magnified View ...................................................................142
d Playing Back with the Touch Screen........................................143
k Playing Movies........................................................................145
L Erasing Images........................................................................147
Viewing the CD-ROM Instruction Manuals /
9
Downloading Images to Your Computer 149
Viewing the Camera Instruction Manual CD-ROM .......................150
Downloading Images to a Computer.............................................152
Software Overview........................................................................154
Installing the Software...................................................................156
Software Instruction Manual.........................................................157
Contents
Certification Logo
Select [54: Certification Logo Display] and press <0> to display some of the logos of the camera’s certifications. Other certifi ca tion logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
13
Handling Precautions
COPY
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near anything emitting strong radio waves, such as a large antenna. S trong magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct
sunlight. High temperatures can cause the camera to malfunction.
T he camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Do not block the mirror operation with your finger, etc. Doing so may cause a
malfunction.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean the camera body or lens. For stubborn dirt, take the camera to the nearest Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent condensation, first put the camera in a sealed plastic bag and let it adjust to the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and battery from the camera, and wait until condensa tio n has evap orated b efo re using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the camera is in storage, press the shutter button a few times once in a while to check that the camera is still working.
Avoid storing the camera where there are chemicals that result in rust and
corrosion such as in a chemical lab.
14
Handling Precautions
COPY
If the camera has not been used for an extended period, test all it s functi ons
before using it. If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your Canon dealer or check the camera yourself an d make sure it is working properly.
If you use continuous shooting, Live View shooting, or movie shooting for a
prolonged period, the camera may become hot. This is not a malfunction.
LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there may be a f ew dead pixels displaying only black or red, etc. among the remaining 0.01% or less pixels. Dead pixels are not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only temporary and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slow in low temperatures, or look black
in high temperatures. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration.
Do not touch the card’s electronic contacts with your fingers or anything
metallic.
Do not affix any stickers, etc., on the ca rd. Do not store or use the card near anything having a strong magnetic field,
such as a TV set, speakers, or magnet. Also avoid places prone to having static electricity.
Do not leave the card in direct sunlight or near a heat source. Store the card in a case. D o not store the card in hot, dusty, or humid locations.
Lens
After detaching the lens from the camera, put down the lens with the rear end up and attach the lens caps to avoid scratching the lens surface and electrical contacts.
Contacts
15
Nomenclature
COPY
LCD panel (p.18) <i>
ISO speed
setting button (p.100) <q> Metering mode
selection button <B> AF area
selection mode button (p.92)
<6> Main Dial (p.42)
<U> LCD panel illumination button (p.45)
Shutter button (p.41)
Red-eye reduction/ Self-timer lamp (p.96)
Remote control sensor
Grip (Battery compartment)
DC coupler cord hole
Depth-of-field preview button
Body cap (p.36)
<R> Drive mode selection button (p.95)
<f> AF mode selection button (p.88)
EF lens mount index (p.36)
Built-in flash/AF-assist beam (p.117)
EF-S lens mount index (p.36)
Flash sync contacts
Hot shoe
<D> Flash button (p.117)
Microphone
Lens lock pin
Lens mount
Mirror
<Y> External microphone IN terminal
Audio/video OUT/Digital terminal
Contacts (p.15)
<F> Remote control terminal
<D>
HDMI mini OUT terminal
<q/C>
(p.152)
Mode Dial lock-release button (p.42)
Mode Dial (p.20)
Strap mount (p.23)
Speaker (p.145)
Lens release button (p.37)
16
Nomenclature
/
COPY
<V> Focal plane mark
<A/k> Live V Movie shooting switch (p.1 <0> Start/Stop button (p.120, 134)
Power switch (p.31)
<M> Menu button (p.48)
<B> Info button (p.45, 59, 64, 122, 136, 140)
iew shooting/
19/133)
Dioptric adjustment knob
Eyecup
Viewfinder eyepiece
LCD monitor (p.48)
Tripod socket
<Q> Quick Control button (p.46)
<x> Playback button (p.140)
<9> <V> <U> Multi-controller (p.44)
<L> Erase button (p.147)
<p> AF start button (p.41, 88)
<A> AE lock/FE lock button <y> Index/Reduce button (p.116/141, 142)
<S> AF point selection/ <u> Magnify button (p.93/142)
Access lamp (p.29)
Strap mount (p.23)
Card slot cover (p.27)
Battery compartment cover release lever (p.26)
Battery compartment cover (p.26)
<5> Quick Control Dial (p.43)
Multi function lock switch (p.44)
<0> Setting button (p.48)
Card slot (p.27)
17
Nomenclature
A
A A
COPY
LCD panel
Drive mode (p.95)
u Single shooting o High-speed continuous shooting i Low-speed continuous shooting B Silent single shooting M Silent continuous shooting
Q Self-timer: 10 sec./remote control
k Self-timer: 2 sec./remote control
<A> Highlight tone priority (p.106)
<g> ISO speed (p.100)
ISO speed (p.100)
Possible shots Self-timer countdown Bulb exposure time
Error number/Error code (Err) Remaining images to record
F operation (p.88)
X
One-Shot AF
9
I Focus AF
Z
I Servo AF
4 L
Manual focus
<M> Multi Shot Noise Reduction (p.104)
<w> HDR shooting
<P> Multiple-exposure shooting
Shutter speed FE lock (FEL) Busy (buSY)
Built-in flash recycling (buSY)
Multi function lock warning (L) No card warning (Card) Card full warning (FuLL) Error code (Err) Cleaning image sensor (CLn)
* The EOS 70D (N) does not have the Wi-Fi function (Not Displayed). * The display will show only the settings currently applied.
<h> AEB (p.115)
Exposure level indicator Exposure compensation amount (p.114) AEB range (p.115)
Aperture
AF point selection
--
(
[ ] AF, SEL [ ], SEL AF)
----
18
Metering mode
q Evaluative metering w Partial metering r Spot metering e Center-weighted
average metering
Wi-Fi function* <k/l>
1 2
Battery check (p.32)
Viewfinder Information
COPY
Spot metering circle Single-point AF (Manual selection)
(p.91) Zone AF points (p.91) Focusing screen
Grid (p.58)
Nomenclature
Zone AF (Manual zone selection) (p.91)
19-point automatic selection AF (p.91)
AF points (p.91)
Electronic level (p.60)
<z> Battery check
(p.32)
<A> AE lock (p.116) / AEB in-progress (p.115)
<D> Flash-ready (p.117) Improper FE lock warning
<d> FE lock / FEB in-progress <e> High-speed sync
<y> Flash exposure compensation
Shutter speed (p.111) FE lock (FEL) Busy (buSY) Built-in flash recycling (buSY)
Multi function lock warning (L) No card/card error warning (Card) Card full warning (FuLL) Error code (Err)
<A> Highlight tone priority (p.106)
Exposure level indicator Exposure compensation amount (p.114) AEB range (p.115)
Red-eye reduction lamp-on indicator
AF point selection
----
[ ] AF, SEL [ ], SEL AF)
(
--
Aperture (p.112)
The display will show only the settings currently applied.
Warning symbol
<g> ISO speed (p.100)
<o> Focus confirmation light (p.67)
Max. burst Number of remaining multiple exposures
ISO speed (p.100)
19
Nomenclature
COPY
Mode Dial
Turn the Mode Dial while holding down the Mode Dial center (Mode Dial lock release button).
Creative Zone
These modes give you more control for shooting various subjects.
d : Program AE (p.110) s : Shutter-priority AE (p.111) f : Aperture-priority AE (p.112) a : Manual exposure (p.113)
F : Bulb
Basic Zone
Custom shooting mode
You can register the shooting mode (d/s/ f/a/F), AF operation, menu settings, etc., to w and shoot.
All you do is press the shutter button. The camera sets everything to suit the subject or scene.
A : Scene Intelligent Auto (p.66) 7 :Flash Off(p.71)
C : Creative Auto (p.72)
8 : Special scene (p.75)
2 : Portrait (p.76) 3 : Landscape (p.77) 4 : Close-up (p.78) 5: Sports (p.79) 6 : Night Portrait (p.80) F : Handheld Night Scene (p.81) G : HDR Backlight Control (p.82)
20
Lens
COPY
Lens without a distance scale
Hood mount (p.38)
Filter thread (front of lens)
Zoom ring (p.37)
Image Stabilizer switch (p.39)
Lens mount index (p.36)
Nomenclature
Focusing ring (p.94, 130)
Focus mode switch (p.36)
Zoom position index
Contacts (p.15)
21
Nomenclature
COPY
Battery Charger LC-E6
Charger for Battery Pack LP-E6 (p.24).
Power plug
Battery pack slot
Charge Lamp
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment pl ug adapter of the proper configuration for the power outlet, if needed.
Battery Charger LC-E6E
Charger for Battery Pack LP-E6 (p.24).
Charge lamp
Battery pack slot
Power cord socket
22
Power cord
1
COPY
Getting Started
This chapter explains preparatory steps before you start shooting and basic camera operations.
Attaching the Strap
Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
The eyepiece cover is also
attached to the strap.
Eyepiece cover
23
Charging the Battery
COPY
Remove the protective cover.
1
Detach the protective cover provided
Attach the battery.
2
As shown in the illustration, attach the
To detach the battery, follow the
LC-E6
LC-E6E
Recharge the battery.
3
For LC-E6
As shown by the arrow, flip out the
For LC-E6E
Connect the power cord to the
X Recharging starts automatically and
with the battery.
battery securely to the charger.
above procedure in reverse.
battery charger’s prongs and insert the prongs into a power outlet.
charger and insert the plug into a power outlet.
the charge lamp blinks in orange.
Charge Level
0-49%
50-74% Blinks twice per second 75% or higher Blinks three times per second Fully charged Green Lights up
It takes approx. 2.5 hours to fully recharge a completely exhausted battery at room temperature (23°C / 73°F). The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take longer (up to approx. 4 hours).
24
Color Display
Orange
Charge Lamp
Blinks once per second
Charging the Battery
COPY
Tips for Using the Battery and Charger
Upon purchase, the battery is not fully charged.
Charge the battery before use.
Recharge the battery on the day before or on the day it is to be used.
Even during storage, a charged battery will gradually drain and lose its capacity.
After recharging the battery, detach it and disconnect the
charger from the power outlet.
You can attach the cover in a different
orientation to indicate whether the battery has been recharged or not.
If the battery has been recharged, attach the cover so that the battery-shaped hole < > is aligned over the blue sticker on the battery. If the battery is exhausted, attach the cover in the opposite orientation.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small amount of power current is released, resulting in excess discharge and shorter battery life. Store the battery with the protective cover attached. Storing the battery when it is fully charged may lower the battery’s performance.
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz power source. If necessary, attach a commercially-available plug adapter for the respective country or region. Do not attach any portable voltage transformer to the battery charger. Doing so can damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has reached the end of its service life.
Check the battery’s recharge performance and purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for approx. 10 sec.
If the battery’s remaining capacity is 94% or hi gher , t he battery will not be
recharged.
The charger cannot charge any battery other than Battery Pack LP-E6.
25
Installing and Removing the Battery
COPY
Load a fully charged Battery Pack LP-E6 into the camera. The camera’s viewfinder becomes bright when a battery is installed, and darkens when the battery is removed.
Installing the Battery
Open the cover.
1
Slide the lever as shown by the
arrows and open the cover.
Insert the battery.
2
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
Close the cover.
3
Press the cover until it snaps shut.
Only Battery Pack LP-E6 can be used.
Removing the Battery
Open the cover and remove the battery.
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent short circuiting of the
battery contacts, be sure to attach the provided protective cover (p.24) to the battery.
26
Installing and Removing the Card
COPY
The camera can use an SD, SDHC, or SDXC memory card (sold separately). An UHS-I Speed Class SDHC or SDXC memory card can also be used. The captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to enable writing/erasing.
Installing the Card
Open the cover.
1
Slide the cover as shown by the
arrows to open it.
Write-protect switch
Possible shots
Insert the card.
2
As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place.
Close the cover.
3
Close the cover and slide it in the
direction shown by the arrows until it snaps shut.
When you set the power switch to
<1>, the number of possible shots will be displayed on the LCD panel.
27
Installing and Removing the Card
COPY
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card.
Removing the Card
Access lamp
Open the cover.
1
Set the power switch to <2>. Make sure the access lamp is off,
then open the cover.
If [Recording...] is displayed, close
the cover.
Remove the card.
2
To eject the card, gently push it in and
then let go.
Pull the card straight out, then close
the cover.
28
Installing and Removing the Card
COPY
When the access lamp is lit or blinking, it indicates that images are
being written to or read by the card, being erased, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number may no t
start from 0001.
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card. If you can transfer all the images on the card to a computer, transfer all the images and then format the card with the camera (p.53). The card may then return to normal.
Do not touch the card’s contacts with your fingers or metal objects. Multimedia cards (MMC) cannot be used (card error will be displayed).
29
Using the LCD Monitor
COPY
After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, and play back images and movies. You can change the direction and angle of the LCD monitor.
Flip out the LCD monitor.
1
180°
90°
175°
Rotate the LCD monitor.
2
When the LCD monitor is swung out,
you can rotate it up or down or face it forward toward the subject.
The indicated angles are only
approximate.
Face it toward you.
3
Normally, face the LCD monitor
toward you.
Be careful not to force and break the hinge when rotating the LCD monitor.
When not using the camera, close the LCD monitor with the screen
facing inward. This will protect the screen.
During Live View shooting or movie shooting, facing the LCD monitor
toward the subject will display a mirror image on the screen.
30
Loading...
+ 134 hidden pages