Before starting to shoot, be sure to read the following
To avoid shooting problems and accidents, first read the Safety Instructions and Handling
Precautions. Also read this Advanced User Guide carefully to ensure that you use the
camera correctly.
Take some test shots, and understand about product liability
After shooting, play images back and check whether they have been properly recorded. If
the camera or memory card is faulty and the images cannot be recorded or downloaded to a
computer, Canon cannot be held liable for any loss or inconvenience caused.
Copyrights
Unauthorized public use of images captured with the camera that include copyrighted
subjects may be prohibited by law. Also be aware that certain public performances,
exhibitions, etc. may prohibit photography even for private enjoyment.
Firmware version
Outdated firmware will prevent you from using Browser Remote. In this case, download the
latest version from the Canon website and update the firmware.
Connecting other devices
Use the included interface cable or a Canon cable when connecting the camera to a
computer or other device. When connecting an interface cable, also use the included
cable protector ( ).
• Package Contents
• Instruction Manuals
• Quick Start Guide
• About This Guide
• Compatible Cards
• Safety Instructions
• Handling Precautions
• Part Names
• Software
8
Package Contents
Before use, make sure the following items are included in the package. If anything is
missing, contact your dealer.
(with body cap and battery compartment cap)
Camera
Eyecup Eg
Battery Pack LP-E19
(with protective cover)
Battery Charger LC-E19
(with protective cover)
Strap
Interface Cable
9
Cable Protector
The camera does not come with a memory card ( ) or HDMI cable.
Attach Eyecup Eg to the viewfinder eyepiece.
Be careful not to lose any of these items.
No software CD-ROM is included. Software ( ) can be downloaded from the Canon
website.
Caution
The transmission rate when the included interface cable is used is equivalent to
SuperSpeed USB (USB 3.1 Gen 1).
10
Instruction Manuals
The Instruction Manual included with the camera describes camera features and
provides instructions up to turning the camera on.
Advanced User Guide
Complete instructions are provided in this Advanced User Guide.
For the latest Advanced User Guide, refer to the following website.
https://cam.start.canon/C001/
Lens/Software Instruction Manual
Download from the following website.
https://cam.start.canon/
Note
Select [ : Manual/software URL] to display the QR code on the camera screen.
11
Quick Start Guide
Insert the battery ( ).
1.
Upon purchase, charge the battery to start using ( ).
Insert the card ( ).
2.
You can insert two cards.
Attach the lens (
3.
Align the red mount index on the lens with the red mount index on the
camera to attach the lens.
).
12
Set the lens's focus mode switch to <> ( ).
4.
Set the power switch to <> ( ).
5.
Set the shooting mode to < > ( ).
6.
Press the <> button.
Look at the top LCD panel and turn the <> or < > dial to select
<
>.
13
Focus on the subject ( ).
7.
Look through the viewfinder and center the subject on the screen.
Press the shutter button halfway, and the camera will focus on the
subject.
Take the picture ( ).
8.
Press the shutter button completely to take the picture.
Review the picture.
9.
The image just captured will be displayed for approx. 2 sec. on the
screen.
To display the image again, press the <> button ( ).
To shoot while looking at the screen, see Live View Shooting.
14
About This Guide
Icons in This Guide
Basic Assumptions for Operational Instructions and Sample Photos
Icons in This Guide
Indicates the Main dial.
<>
Indicates the Quick control dial.
< >
Indicates the Multi-controller.
< >
Indicates the Smart controller.
< >
Indicates the Set button.
< >
Indicates the duration (in * seconds) of the operation for the button you pressed, as
*
timed after you release the button.
In addition to the above, the icons and symbols used on the camera's buttons and
displayed on the screen are also used in this guide when discussing relevant operations
and functionality.
Links to pages with related topics.
Warning to prevent shooting problems.
Supplemental information.
Tips or advice for better shooting.
Troubleshooting advice.
15
Basic Assumptions for Operational Instructions and
Sample Photos
Before following any instructions, make sure the power switch is set to <> ( ).
It is assumed that all the menu settings and Custom Functions are set to their defaults.
Screen shots in this guide show the default menu settings for NTSC regions (North
America, Japan, South Korea, Mexico, etc.) as an example. Default menu settings for
Europe, Russia, China, Australia, etc. will be for PAL.
Illustrations in this guide show the camera with the EF 50mm f/1.8 STM lens attached as
an example.
Sample photos in this guide are only for illustration.
16
Compatible Cards
The following cards can be used with the camera regardless of capacity. If the card is new
or was previously formatted (initialized) by another camera or computer, format the
card with this camera ( ).
CFexpress cards
* Type B compatible
Cards That Can Record Movies
When recording movies, use a card with ample performance (fast enough writing and
reading speeds) for the movie recording quality (
In this guide, “card” refers to CFexpress cards.
* A card is not included. Please purchase it separately.
).
17
Safety Instructions
Be sure to read these instructions in order to operate the product safely.
Follow these instructions to prevent injury or harm to the operator of the product or others.
WARNING:
Keep the product out of the reach of young children.
A strap wrapped around a person's neck may result in strangulation.
The parts or provided items of cameras or accessories are dangerous if swallowed. If
swallowed, seek immediate medical assistance.
The battery is dangerous if swallowed. If swallowed, seek immediate medical assistance.
Use only power sources specified in this instruction manual for use with the product.
Do not disassemble or modify the product.
Do not expose the product to strong shocks or vibration.
Do not touch any exposed internal parts.
Stop using the product in any case of unusual circumstances such as the presence of
smoke or a strange smell.
Do not use organic solvents such as alcohol, benzine or paint thinner to clean the
product.
Do not get the product wet. Do not insert foreign objects or liquids into the product.
Do not use the product where flammable gases may be present.
This may cause electric shock, explosion or fire.
Do not leave a lens or a camera/camcorder with a lens attached, exposed without the
lens cap attached.
The lens may concentrate the light and cause fire.
For products featuring a viewfinder, do not look through the viewfinder at strong light
sources such as the sun on a bright day or lasers and other strong artificial light
sources.
This may harm your vision.
Do not touch the product connected to a power outlet during lightning storms.
This may cause electric shock.
Observe the following instructions when using commercially available batteries or
provided battery packs.
• Use batteries/battery packs only with their specified product.
• Do not heat batteries/battery packs or expose them to fire.
• Do not charge batteries/battery packs using non-authorized battery chargers.
• Do not expose the terminals to dirt or let them come into contact with metallic pins
or other metal objects.
• Do not use leaking batteries/battery packs.
• When disposing of batteries/battery packs, insulate the terminals with tape or other
means.
This may cause electric shock, explosion or fire.
If a battery/battery pack leaks and the material contacts your skin or clothing, flush the
exposed area thoroughly with running water. In case of eye contact, flush thoroughly with
copious amounts of clean running water and seek immediate medical assistance.
Denotes the risk of serious injury or death.
18
Observe the following instructions when using a battery charger.
• Periodically remove any dust buildup from the power plug and power outlet using a
dry cloth.
• Do not plug in or unplug the product with wet hands.
• Do not use the product if the power plug is not fully inserted into the power outlet.
• Do not expose the power plug and terminals to dirt or let them come into contact
with metallic pins or other metal objects.
Do not place heavy objects on the power cord. Do not damage, break or modify the
power cord.
Do not wrap the product in cloth or other materials when in use or shortly after use when
the product is still warm in temperature.
Do not unplug the product by pulling the power cord.
Do not leave the product connected to a power source for long periods of time.
Do not charge batteries/battery packs at temperatures outside the range of 5 - 40 °C
(41 - 104 °F).
This may cause electric shock, explosion or fire.
Do not allow the product to maintain contact with the same area of skin for extended
periods of time during use.
This may result in low-temperature contact burns, including skin redness and blistering,
even if the product does not feel hot. The use of a tripod or similar equipment is
recommended when using the product in hot places and for people with circulation problems
or less sensitive skin.
Follow any indications to turn off the product in places where its use is forbidden.
Not doing so may cause other equipment to malfunction due to the effect of electromagnetic
waves and even result in accidents.
19
CAUTION:
Do not fire the flash near the eyes.
It may hurt the eyes.
Do not look at the screen or through the viewfinder for prolonged periods of time.
This may induce symptoms similar to motion sickness. In such a case, stop using the
product immediately and rest for a while before resuming use.
Flash emits high temperatures when fired. Keep fingers, any other part of your body,
and objects away from the flash unit while taking pictures.
This may cause burns or malfunction of the flash.
Do not leave the product in places exposed to extremely high or low temperatures.
The product may become extremely hot/cold and cause burns or injury when touched.
Strap is intended for use on the body only. Hanging the strap with any product attached
on a hook or other object may damage the product. Also, do not shake the product or
expose the product to strong impacts.
Do not apply strong pressure on the lens or allow an object to hit it.
This may cause injury or damage to the product.
Only mount the product on a tripod that is sufficiently sturdy.
Do not carry the product when it is mounted on a tripod.
This may cause injury or may result in an accident.
Do not touch any parts inside the product.
This may cause injury.
If any abnormal skin reaction or irritation occurs during or following the use of this
product, refrain from further use and get medical advice/attention.
Denotes the risk of injury.
20
Handling Precautions
Camera care
This camera is a precision instrument. Do not drop it or subject it to physical shock.
The camera is not waterproof and cannot be used underwater.
To maximize the camera's dust- and drip- resistance, keep the terminal cover, battery
release handle, card slot cover, and all other covers firmly closed.
This camera is designed to be dust- and drip- resistant, in order to help prevent sand,
dust, dirt, or water that falls on it unexpectedly from getting inside, but it is impossible to
prevent dirt, dust, water, or salt from getting inside at all. As far as possible, do not allow
dirt, dust, water, or salt to get on the camera.
If water gets on the camera, wipe it off with a dry and clean cloth. If dirt, dust, or salt gets
on the camera, wipe it off with a clean, well-wrung wet cloth.
Using the camera in dusty or dirty locations may lead to damage.
Cleaning the camera after use is recommended. Allowing dirt, dust, water, or salt to
remain on the camera may cause a malfunction.
If you accidentally drop the camera into water or are concerned that moisture (water),
dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service
Center.
Never leave the camera near anything having a strong magnetic field such as a magnet
or electric motor. Also, avoid using or leaving the camera near anything emitting strong
radio waves, such as a large antenna. Strong magnetic fields can cause camera
malfunction or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct sunlight. High
temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to disassemble the
camera yourself.
Do not block the mirror operation with your finger, etc. Doing so may cause a
malfunction.
Use only a commercially available blower to blow away dust when it adheres to the lens,
viewfinder, mirror, focusing screen, etc. Do not use cleaners that contain organic
solvents to clean the camera body or lens. For stubborn dirt, take the camera to the
nearest Canon Service Center.
Do not touch the camera's electrical contacts with your fingers. This is to prevent the
contacts from corroding. Corroded contacts can cause camera malfunction.
If the camera is suddenly brought in from the cold into a warm room, condensation may
form on the camera and internal parts. To prevent condensation, first put the camera in
a sealed plastic bag and let it adjust to the warmer temperature before taking it out of
the bag.
If condensation forms on the camera, to avoid damage, do not use the camera or
remove the lens, card, or battery. Turn the camera off and wait until the moisture has
fully evaporated before resuming use. Even after the camera is completely dry, if it is still
internally cold, do not remove the lens, card, or battery until the camera has adjusted to
the ambient temperature.
If the camera will not be used for an extended period, remove the battery and store the
camera in a cool, dry, well-ventilated location. Even while the camera is in storage,
press the shutter button a few times once in a while to check that the camera is still
working.
21
Avoid storing the camera where there are chemicals that result in rust and corrosion
such as in a chemical lab.
If the camera has not been used for an extended period, test all its functions before
using it. If you have not used the camera for some time or if there is an important shoot
such as a foreign trip coming up, have the camera checked by your nearest Canon
Service Center or check the camera yourself and make sure it is working properly.
The camera may become hot after repeated continuous shooting, Live View shooting, or
movie shooting over an extended period. This is not a malfunction.
If there is a bright light source inside or outside the image area, ghosting may occur.
Screen and LCD panels
Although the screen is manufactured with very high precision technology with over
99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also
be spots of black, red, or other colors. This is not a malfunction. They do not affect the
images recorded.
If the screen is left on for a prolonged period, screen burn-in may occur where you see
remnants of what was displayed. However, this is only temporary and will disappear
when the camera is left unused for a few days.
The screen display may seem slightly slow in low temperatures or may look black in
high temperatures. It will return to normal at room temperature.
Cards
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force, physical shock,
or vibration.
Keep dust and foreign material out of the card opening.
Do not affix any stickers, etc. on the card.
Do not store or use the card near anything that has a strong magnetic field, such as a
television, speakers, or magnets. Also avoid places prone to having static electricity.
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
22
Lens
After detaching the lens from the camera, put down the lens with the rear end up and
attach the rear lens cap to avoid scratching the lens surface and electrical contacts
(1).
Smudges on the image sensor
Besides dust entering the camera from outside, in rare cases, lubricant from the camera's
internal parts may adhere to the front of the sensor. If smudges are visible on images, have
the sensor cleaned by a nearest Canon Service Center.
23
Part Names
(1)
(2)
(3)
(4)
(5)
(12)
(13)
(14)
(15)
(16)
(6)
(7)
(8)
(9)
(10)
(11)
(22)
(23)
(17)
(18)
(19)
(20)
(21)
Attaching the Strap
Using the Cable Protector
24
(1)Lens mount index
(2)Depth-of-field preview button
(3)Multi-function button 2
(4)Self-timer lamp
(5)Shutter button
(6)Grip
(7)Vertical-grip On/Off switch
(8)<
> Vertical-grip AF area selection/
Vertical-grip AF method selection/
Vertical-grip multi-function/
Vertical-grip FE lock/
Vertical-grip multi-spot metering button
(9)Vertical-grip main dial
(10) Vertical-grip shutter button
(11) Hand strap mount
(12) Mirror
(13) Movie shooting microphone
(14) Lens lock pin
(15) Lens release button
(16) Lens mount
(17) Contacts
(18) Vertical-grip depth-of-field preview button
(19) Vertical-grip Multi-function button 2
(20) Tripod socket
(21) Serial number
(22) Accessory positioning hole
(23) Body cap
25
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(20)
(21)
(15)
(16)
(17)
(18)
(19)
26
(1)<> White balance selection button
(2)< > LCD panel illumination button
(3)GPS antenna
(4)Hot shoe
(5)Flash sync contacts
(6)Eyecup
(7)Screen
(8)< > Quick Control button
(9)<> Vertical-grip AF start button/
Vertical-grip smart controller
(10) Speaker
(11) < > Exposure compensation/
Aperture value setting button
(12) <
> AF area selection/
AF method/
Multi-function/
FE lock/
Multi-spot metering button
(13) <> ISO speed setting/Time display button
(14) <> Main dial
(15) Strap mount
(16) < > Multi-controller
(17) < > Setting button
> Quick control dial
(18) <
(19) < > Vertical-grip Multi-controller
(20) < > Vertical-grip AE lock button
(21) <> Vertical-grip AF point selection button
27
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
28
(1)<> Flash exposure compensation/
Metering mode selection button
(2)<> Shooting mode selection button
(3)<> Drive mode/
AF operation selection button
(4)< > AEB setting button
(5)System extension mounting hole
(6)Terminal cover
(7)System extension terminal
(8)<> External microphone IN/
Line input terminal
> Headphone terminal
(9)<
(10) < > Remote control terminal (N3 type)
(11) Top LCD panel
(12) < > Live View shooting/
< > Movie shooting switch
< > Start/Stop button
(13) <
> AF start button/
Smart controller
(14) < > AE lock button
(15) <> AF point selection button
(16) Eyepiece shutter lever
(17) Viewfinder eyepiece
(18) Dioptric adjustment knob
(19) < > Ethernet RJ-45 terminal
(20) <> Digital terminal
(21) <
> HDMI mini OUT terminal
(22) < > PC terminal
29
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(22)
(23)
(17)
(18)
(19)
(20)
(21)
30
Loading...
+ 931 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.