Canon eb52 SERVICE MANUAL
SERVICE MANUAL
PARTS CATALOG
REVISION 0
COPYRIGHT 1999 CANON INC. CANON ETHERNET BOARD EB-52 REVISION 0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
RY8-1399-000
MAR. 1999
ETHERNET BOARD
for LBP-3260/1760/2460
COPYRIGHT © 1999 CANON INC
Printed in Japan
Imprimé au Japon
Use of this manual should be
strictly supervised to avoid
disclosure of confidential
information.
Prepared by
PERIPHERAL PRODUCTS QUALITY ADVANCEMENT DIV.
PERIPHERAL PRODUCTS TECHNICAL DOCUMENTATION DEPT.
CANON INC.
5-1, Hakusan 7-chome, Toride-City, Ibaraki-Pref. 302-8501, Japan
PREFACE
This Service Manual and Parts Catalog contains basic information required for after-sales service of the Ethernet Board EB-52 (hereinafter referred to as the “ethernet board”). This information is vital to the service technician in maintaining the high print quality and performance
of the ethernet board.
This manual consists of the following chapters:
Chapter 1: Service manual
Features, specifications, installation, and malfunction troubleshooting
Chapter 2: Parts catalog
Ethernet board assembly
Information in this manual is subject to change as the product is improved or redesigned.
All relevant information in such cases will be supplied in Service Information Bulletins.
A thorough understanding of this printer, based on information in this Manual and Service
Information Bulletins, is required for maintaining its performance and for locating and repairing the causes of malfunctions.
Trademark Credits
Canon is a registered trademark and NetSpot is a trademark of Canon, Inc.
Apple, AppleTalk, Macintosh, and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Novell and NetWare are registered trademarks, and IPX/SPX is a trademark, of Novell, Inc.
Sun is a registered trademark, and Solaris is a trademark, of Sun Microsystems, Inc. SPARC is a registered
trademark of SPARC International, licensed exclusively to Sun Microsystems, Inc.
UNIX is a registered trademark in the United States and other countries, licensed exclusively through
X/Open Company, Ltd.
Other brand and product names are trademarks and/or registered trademarks of their respective companies.
DTP system
This manual was produced on an Apple PowerMacintosh G3 personal computer and output by an Apple
LaserWriter 16/600 PS laser beam printer; final pages were printed on DAINIPPON SCREEN MFG CO. LTD
DT-R3100.
All graphics were produced with Macromedia FreeHand (J), and all documents and page layouts were
created with QuarkXPress (E).
CONTENTS
CHAPTER 1SERVICE MANUAL
I. FEATURES ............................1-1
II. SPECIFICATIONS ..................1-2
A.Hardware ..........................1-2
B.Software ...........................1-2
C.Ethernet Board Connector
Locations .........................1-3
D.System Block Diagram .....1-3
E.Interface Connector .........1-4
CHAPTER 2PARTS CATALOG
I. ETHERNET BOARD
ASSEMBLY ............................2-1
III.INSTALLATION ......................1-6
A.To Install The Ethernet
Board ...............................1-6
B.To Power On The Printer
And Check The LEDs ........1-10
C.To Set The DIP Switches ..1-11
IV. MALFUNCTION
TROUBLESHOOTING .............1-12
CHAPTER 1
SERVICE MANUAL
I. FEATURES ............................ 1-1
II. SPECIFICATIONS .................. 1-2
III. INSTALLATION ...................... 1-6
IV. MALFUNCTION
TROUBLESHOOTING ............. 1-12
Loading...