Canon Creative park Service Manual

View of completed model

Front Right side

Left sideBack

PAGE01

Drum set : Assembly Instructions

Parts sheet (Pattern) : Twenty-two A4 sheets (No.1~No.22)

No. of Parts : 384

Assembly Instructions : Ten A4 sheets (No.1~No.10)

*Build the model by carefully reading the Assembly Instructions, in the parts sheet page order. *Assembly will be easier if you write the part's number on the back of each part.

A drum set is a collection of various types of drums, cymbals and other percussion instruments that are lined up in a formation that makes them easily played by one person. The number and type of instruments included can be arranged according to the performer's preference or characteristics of the music. The performer usually plays seated on a stool. The idea for the drum set is said to have originated in military bands, when a cymbal was placed on top of the bass drum to make it easier for the performer holding it. This was followed by the idea to use a pedal to play the bass drum with the foot, and the invention of the hi-hat, two cymbals on top of each other that are clashed together. These adaptations have resulted in the drum set up and beat style we know today.

Trace along the folds with a ruler and a used pen (no ink) to get a sharper, easier fold.

Handy Hint

Mountain fold (dotted line)

Make a mountain fold.

Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children.

Scissors, set square, gl ue (We recommend sti ck glue),pen cil, used ballpoint pen, toothpicks, tweezer s, (useful for handling small parts)

Assembly tip CautionAssembly Instructions Tools and mate rials

Valley fold

(dashed and dotted line)

Make a valley fold.

Scissors line (solid line)

Cut along the line.

Cut In line (orange solid line)

Cut a slot.

Cut out (orange shaded)

Cut out the area marked.

The glue s pot(col ored dot) shows where to app ly the glue.

Glue spot (Red dot)

Glue parts with the same number together.

Glue spot (Green dot)

Glue within the same part.

Glue spot (Blue dot)

Glue to the rear of the other part.

Glue spot (Yellow dot)

Apply glue to the back, and attach to the back of the other parts.

Before gluing, crease the paper along mountain fold and valley fold lines and make sure rounded sections are nice and stiff.

PAGE02

Drum set : Assembly Instructions

Wrapping the piece around a can or other cylindrical object will result in a neater finish.

Handy Hint:

PAGE02

PAGE03

Bass drum

Front side

Back side

*NB: Begin from the opposite side to the seam.

Upper part

Front side

Back side

Align the marker lines on 3A and 3B with the glue spots on 3C ~ 3H, and attach.

*Align the reverse sides and attach.

*NB: Align the thick marker line with the upper part, and insert it through to the front side. Do not apply glue.

*Attach to the display stand later.

Before starting.

Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet No.1~No.22). Work in order of these sheet numbers. (The parts for assembly are on pages 2 ~ 22.)

There are 384 parts in total, and each part is numbered according to its page. Also, the glue spots on each part are marked with the number of the part to attach to them.

The numbers ~ in the Assembly Instructions indicate the order to attach parts. Follow this order when attaching.

When one part has multiple spots to attach, or glue spots for attaching other pieces, colors ( ) and numbers are used to show the precise location and method for attaching. Check the diagrams in the "Assembly Instructions" carefully for each part as you work.

Diagonal line

Seam

Bass drum

Lower part

Upper part

*Take note of where the thick marker line is.

PAGE03

Drum set : Assembly Instructions

*Take note of where the thick marker line is.

Upper part

Lower part

*Align the reverse sides and attach.

*Be sure to align the thick black marker lines on the top and bottom (circled here in blue) when attaching.

Inside

*Attach the back.

Wrapping the piece around a thin cylindrical object will result in a neater finish.

Align the seam lines and insert the pieces inside each other, and attach to the specified position.

Assemble both the left and right parts so that their seams face outwards.

Face the seam line inwards and insert the piece to the position specified.

PAGE04

PAGE05

PAGE06

*Roll up and attach.

*Do not attach the area marked with the diagonal lines.

*After attaching, swivel the pieces around as shown, so that the seams face inwards.

*Attach the parts circled in blue around the tom holder pipes so that the pipes are held up vertically.

Seam line

Tom holder pipe

Tom-tom 13" x 10"

Bass drum Bass drum

Align the marker lines on 6A and 6B with the glue spots on 6C ~ 6H, and attach.

+ 7 hidden pages