Canon CanoScan LiDE 35 Quick Start Guide

Quick Start Guide

1
2

Quick Start Guide

Be sure to install the software programs before connecting the scanner
to the computer!

Setup and Scanning

English

Check the Package Contents

Install the Software

Windows

Macintosh

Unlock the Scanning Unit

Connect the Scanner

Try Scanning

p.

3

p.

4

p.

5

p.

6

p.

7

p.

8

Try the Additional Features

Using the Scanner Buttons
Using the USB 2.0 Interface

expansion cards (Windows Only)

Please read this guide before operating this scanner. After you finish reading this guide, store it in
a safe place for future reference.

p.

1

p.

1

1

Guide to the Manuals

Guide to the Manuals

Open the Package

Quick Start Guide (this guide)

This guide describes a series of processes, from opening the package to using the
scanner.

READ THIS GUIDE FIRST!

Scanning Guide (HTML format manual)

Refer to this guide when you have finished setting up the scanner according to the procedures

Quick Start Guide

HTML

in the
and how to solve problems when they occur. You can install this manual onto the hard disk
together with the software programs. When you install it, the
on the desktop. Double-click the icon to view it with a browser program, such as Internet
Explorer.

. It describes how to utilize the scanner with the bundled software,

Scanning Guide

icon will appear

User’s Guides for Application Programs (PDF format manuals)

ArcSoft PhotoStudio

•

ScanSoft OmniPage SE

•

PDF

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Use of a shielded cable with the ferrite core(s) provided with the scanner is necessary to comply with the technical
requirements of the EMC Directive.

Warning

When you use this product, you should pay attention to the following legal issues:

• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be
prohibited by law and may result in criminal and/or civil liability.

• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to
the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.

• CanoScan and ScanGear are trademarks of Canon Inc.

• Adobe

• Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

• Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

• ScanSoft and OmniPage are trademarks of ScanSoft, Inc.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

Select the “View the Electronic Manuals” menu on the CanoScan Setup Utility CD-ROM. To
read these manuals, Adobe Acrobat Reader should be installed on your computer.

®

and Acrobat® are trademarks of Adobe Systems Incorporated.

In this guide, Windows XP screen shots are used to illustrate explanations common to all operating systems.

2

Check the Package Contents

Scanner and Accessories

Check the Package Contents

English

CanoScan LiDE 35

USB Interface Cable

Stand (P. 7)

Documents and Software Programs

• Quick Start Guide (this guide)

• Additional Documents

• CanoScan Setup Utility CD-ROM

• The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.

• Approximately 200 MB/ 160 MB (for Windows/Macintosh) of hard disk space on your

computer is required to install all the programs. Additional free hard disk space is
required to operate the programs.

ScanGear CS (25 MB / 10 MB) - Scanner Driver

It allows you to scan and load images from the scanner.

CanoScan Toolbox (15 MB / 10 MB) - Scanning Utility Program

It enables you to scan images and copy (print), attach images to e-mail messages or save images with
simple steps. It also works with the scanner buttons.

ArcSoft PhotoStudio (35 MB / 20 MB) - Image Editing Program

It allows you to load images from the scanner, edit and retouch them, and apply special effects and
enhancements.

ScanSoft OmniPage SE (90 MB / 80 MB) - OCR (Optical Character Recognition) Program

It converts characters scanned from a book, magazine or newspaper into text data for editing or
digital transmission.

Adobe Acrobat Reader (25 MB / 30 MB) - PDF File Reader Program
Electronic manuals for the above software programs (HTML (10 MB) and PDF manuals )

3

Install the Software (Windows)

Install the Software (Windows)

• With Windows XP/2000, you should log on with
an administrator user name when you install or
uninstall software programs.

• If you are using a computer which does not
equip USB 2.0 interface by standard, refer to
P. 12.

Turn the computer on.

1

If the "Found New Hardware Wizard" or
"Add New Hardware Wizard" appears, click [Cancel].

Place the CanoScan Setup Utility CD-ROM in the drive.

2

After you select your language, the CanoScan Setup Utility main
menu will display.

Click [Install the Software].

3

Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.

The [Install] window will display.

Windows

Click [Start Installation].

4

You will install five software programs and the
(HTML format manual).

The installation procedure will start.

5

Follow the on-screen message prompts and click [Next] or [Yes]
to continue the installation.

• In few cases, your operating system may
require a restart. Follow the on-screen
messages to restart and resume installation.

When the installation is complete, click [Yes].

6

The computer will restart.

After Windows restarts, remove the CD-ROM from

7

the drive and store it in a safe place.

Scanning Guide

Continue on P. 6.

4

Install the Software (Macintosh)

Install the Software (Macintosh)

Turn the computer on.

1

Make sure to log in with the first created administrator to install the software. You cannot install the
software when logged in using added administrator accounts.

Place the CanoScan Setup Utility CD-ROM in the

2

drive.
Double-click the CD-ROM icon.

3

Double-click the [SetUp] icon.

4

After you select your language, the CanoScan Setup Utility
main menu will display.

Click [Install the Software].

5

Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if
you accept the terms.

The [Install] window will display.

Macintosh

English

Click [Start Installation].

6

You will install five software programs and the
(HTML format manual)

The installation procedure will start.

7

Follow the on-screen message prompts and click [Next], [Yes]
or [Install] to continue the installation.

If a verification dialog appears, input the Administrator’s name
and password.

When the installation is complete, click [Yes].

8

The computer will restart.

After restarting, remove the CD-ROM from the drive

9

and store it in a safe place.

Scanning Guide

5

Unlock the Scanning Unit

Unlock the Scanning Unit

• Unlock the scanning unit before connecting the scanner to the computer. If it is left
locked, a malfunction or other problem may occur.

• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.

• When locking the scanner, do not lift up the back and tilt the front (scanner button
location) downward. You may be unable to set the lock.

Peel the seals off the scanner.

1

Gently turn the scanner over.

2

Push the lock switch toward the unlock mark ( ).

3

Return the scanner to a horizontal position.

4

• When carrying or transporting the scanner, always lock the scanning unit by pushing the
lock switch toward the lock mark ( ).

Lock Switch

Unlock Mark

6

Connect the Scanner

Connect the Scanner

• Make sure that the scanning unit is unlocked. (P. 6)

Peel the caution seal from the back of the scanner.

1

Connect the scanner to the computer with the supplied USB interface cable.

2

USB Connector

Wide Flat Connector

USB Interface Cable

Small Square Connector

English

• Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.

• The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.

• When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the
"HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can
operate the scanner in this condition without problems.

Using the Scanner in the Upright Position

Installing the Stand Removing the Stand

Removing the stand.

Press the hook.

Positioning an item

7

Try Scanning

Try Scanning

The following steps explain how to scan with ArcSoft PhotoStudio.

Place a photo or a picture on the glass

1

by aligning its top edge with the
alignment mark, and close the
document cover.

Top

Alignment
Mark

Bottom

Windows

Select [Start], [Programs] or [All

2

Programs], [ArcSoft PhotoStudio 5.5]
and [PhotoStudio 5.5].

Macintosh

Double-click the [Applications] folder

2

followed by the [PhotoStudio] folder
and the [PhotoStudio] icon.

PhotoStudio will start.

PhotoStudio will start.

8

Click the [File] menu and choose [Select Source].

3

Select your scanner model name and click the [Select] button
for Windows or the [OK] button for Macintosh.

• After you set this setting the first time, you
do not need to set it from the second time
onward with the same scanner.

• You will need to reset this setting if you
select a different scanner or a digital
camera.

Click the Acquire icon or click the [File] menu

4

and select [Acquire].

ScanGear CS will start.

Select the [Select Source].

5

You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).

Try Scanning

English

Click [Preview].

6

After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.

• Do not open the document cover while a
scan is in progress.

Select the [Destination].

7

You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 dpi.
When [Image display] is selected, it is set to 150 dpi.

[Print] is selected in this example.

9

Try Scanning

Select the [Output Size].

8

You can select from the following options.

• If you selected [Print] in Step 7:

Flexible / 4"x6" / A4 / Letter / Custom Settings

• If you selected [Image display] in Step 7:

Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 /
2048 x 1536 / Custom Settings

With the [Flexible] option, the scan area enclosed by the
dotted line (cropping frame) will be scanned at the same scale
as the original. You can change the cropping frame.

If you selected [Print] in Step 7, you can select the 4" x 6", A4,
Letter, and Custom Settings options. Expand or decrease the
cropping frame to correspond to the size of the paper for
printing.

If you selected [Image Display] in Step 7, you can select an
output size in pixels to match the sizes used by computer monitors and digital cameras.

Click [Scan].

9

The final scan will start.

Click close box (Windows) or (Macintosh) in

10

the ScanGear CS window to close it.

The scanned image will appear in the PhotoStudio window.

Save the scanned image.

11

Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].

Click close box (Windows) or (Macintosh) in

12

the PhotoStudio window to close it.

• If the scanner does not perform as described above, read the "Troubleshooting" section
of the Scanning Guide (HTML format manual).

• For details about the bundled software programs, read the Scanning Guide or the User’ s
Guide (PDF format manual) for each software program on the CanoScan Setup Utility
CD-ROM.

10

Using the Scanner Buttons

Using the Scanner Buttons

You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily
with a single touch of the button. Place an item on the scanner before pressing a button.

• T o use t hese buttons, Sca nGear CS, Can oScan Toolbox, ArcSoft PhotoStudio and Acrobat
Reader should be installed from the CanoScan Setup Utility CD-ROM.

English

COPY Button

To print (copy) the scanned image with a printer:

Press the [COPY] button.

1

The scanner will scan the item.
The scanned image will print.

• The printer driver should be installed and the
printer should be on-line to use this function.

FILE Button

To save the scanned image as a PDF file:

Press the [FILE] button.

1

The scanner will scan the item.
The scanned image will be saved as a PDF
document and appear in Adobe Acrobat
Reader.

A PDF (Portable Document Format) document is
a file format that can be displayed and printed
with application program such as Adobe
Acrobat Reader/ Adobe Reader. It is easy to
create PDF files for your images by using the
FILE Button on the scanner or the FILE Button in
CanoScan Toolbox. You can also make PDF files
with multiple pages and create text-searchable
PDF files.

SCAN Button

To open the scanned image in the PhotoStudio
window:

Press the [SCAN] button.

1

The scanner will scan the item.
The scanned image will appear in the
PhotoStudio window.

E-MAIL Button

To attach the scanned image to a new e-mail
message:

Press the [E-MAIL] button.

1

The [E-mail software selection] dialog

2

will appear. Select an option from the
list and click [OK].

This step is required only for the first scan.
The e-mail software will start and the scanned
image will be attached in a new message
window.
The scanner will scan the item.

• If you press the [Cancel] button while scanning, you can change the default setting s for
scanning. For changing settings, refer to the Scanning Guide (HTML format manual).

• T o use the E-MAIL Button , one of the following e-ma il programs should be installed and
enabled.

For Windows: Microsoft Outlook Express, Microsoft Outlook, Eudora or Netscape

Messenger. (Some mail programs are required to set the MAPI function on.)

For Macintosh

: Mail (Mac OS X 10.2 or later), Eudora or MS Entourage.

11

Using the USB 2.0 Interface expansion cards (Windows Only)

Using the USB 2.0 Interface expansion cards (Windows Only)

To Switch to USB 2.0

If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning
by purchasing and installing one of the USB 2.0 expansion cards available on the market. Please note that
Macintosh computer with USB 2.0 Hi-Speed interface expansion card is not supported.

Compatible USB Expansion Cards/Hubs

Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility.

Expansion Cards

• Adaptec USB2connect 5100: PCI bus

• Adaptec USB2connect 3100LP: PCI bus

• Adaptec USB2connect 2000LP: PCI bus

• Adaptec DuoConnect: PCI bus

Hubs

• Adaptec XHUB4

• Adaptec XHUB4PLUS

• Adaptec XHUB7PLUS

For installation procedures, please read the instructions that accompany the USB expansion card/hub.

Confirming the USB Version

Use the following procedures to confirm whether your computer is
equipped with a USB version 1.1 or 2.0 interface.

Start ScanGear CS.

1

Click the information icon in the upper portion of the

2

ScanGear CS window.
Read the contents of the Interface category in the displayed

3

window. USB 1.1 will show as “USB 1.1” and USB 2.0 as “USB 2.0.”
Click the close box to close the window.

4

Troubleshooting the USB2.0 Hi-Speed Interface

If the scanner is not operating correctly via the USB2.0 Hi-Speed interface, follow the steps below to
troubleshoot it.

Ensure that you use the USB cable supplied with the scanner.

1

Connect the scanner directly to a USB port on the computer, not through a USB hub.

2

With the Microsoft USB 2.0 driver, if the scanner is not recognized by the computer

3

after installing ScanGear CS:

• Detach the USB cable and attach it again.

Use the following procedures to confirm that the computer correctly recognizes the

4

USB expansion card and the scanner.

1. Open the Windows [Device Manager] and confirm that your scanner name appears below the [Imag­ing Device] category.

2. Confirm that [Adaptec AUA-xxxx], [NEC PCI to USB Enhanced Host Controller] or [Intel PCI to USB
Enhanced Host Controller] appears below the [USB (Universal Serial Bus) Controllers] category.

3. Confirm that the USB expansion card is correctly installed into the computer and that the scanner is
attached to its port.

4. If you use more than two devices via USB2.0 Hi-Speed interface, try to disconnect other devices than
the scanner.

12

Specifications

Specifications

CanoScan LiDE 35
Scanner Type
Scanning Element

CIS (Contact Image Sensor)

Light Source
Optical Resolution
Selectable Resolution

Scanning Bit Depth

Scanning Speed

*1

(Photo or Document)
Preview Speed

*2

Color
Grayscale
Color
Grayscale, B&W

Interface

Maximum Document Size
Scanner Buttons

Operating Range

Te m p e r at u r e

Humidity
Power Requirements
Power Consumption

16 bit input / 16 bit or 8 bit output for each color (RGB)

16 bit input / 8 bit output

6.4 msec./line (600 dpi), 12.7 msec./line (1200 dpi)

3.1 msec./line (600 dpi), 4.2 msec./line (1200 dpi)

USB (USB 1.1 equivalent)
A4/Letter: 216 x 297 mm

4 buttons: COPY, SCAN, FILE, E-MAIL

°

C to 35°C (41°F to 95°F)

5

10% to 90% RH (without condensation formation)

Supplied via USB port

In operation: 2.5 watts maximum, Stand-by: 1.5 watts

Maximum Exterior Dimensions
Weight

*1

USB 2.0 Hi-Speed mode. Transfer time to computer is not included.

*2

Calibration processing time is not included.

*3

Note that Macintosh computer with USB 2.0 Hi-Speed interface expansion card is not supported.

Approximately 1.8 kg

Flatbed

3-color (RGB) LED

1200 x 2400 dpi

25 - 9600 dpi

Approximately 9 sec.

USB 2.0 Hi-Speed

*3

258 x 374 x 38 mm

English

• Specifications are subject to change without notice.

• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 4. For details, please
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).

13

System Information

System Information

This form should be used to record the operating environment for the purchased scanner.
If any problems occur with the scanner, you will need this information when you contact our Customer
Support Help Desk. Be sure to record the information and store it in a safe location.

• This information is also required to request a repair under warranty. Make sure you record the information
and store it in a safe location.

• Guaranteed servicing for this equipment will expire five years after production ceases.

Date of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model: CanoScan LiDE 35
Serial Number (on the back of the equipment):

• About the Computer Used

Manufacturer: Model:
CPU: Clock Speed: MHz
Memory Capacity (RAM): MB

Space Available: MBHard Disk Capacity: MB

OS: Windows XP Me 2000 98

Macintosh OS X v10.1 OS X v10.2 OS X v10.3
Monitor Type: Monitor Size: inches
Printer: Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System:

14