Canon CANOSCAN D660U User Manual

ScanGear CS-U 5.8

for CanoScan D660U Color Scanner

User’s Guide

Top Page Glossary

Contents Index

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without written consent of Canon Inc. Under the law, copying includes translating into another language or format. Microsoft and Windows are registered trademarks or trademarks of the Microsoft Corporation in the United States and other countries. Canon, and CanoScan are registered trademarks of Canon, Inc. ColorGear and ImageTrust are registered trademarks of Canon Inc. All other names are trademarks of their respective companies.

In this manual, screen shots are taken with Windows 98. When you use Windows 2000 Professional, different screens may appear from this manual.

Top Page Glossary

Contents Index

Chapter 1 Before You Begin ................................ 5

Welcome to ScanGear CS-U ...................................................... 6

System Requirements ................................................................ 8

Hardware ............................................................................ 8

Software ............................................................................. 9

Getting Help in ScanGear CS-U............................................... 10

Chapter 2 Installing ScanGear CS-U.................. 11

Installing ScanGear CS-U ......................................................... 12

Installing ScanGear CS-U ................................................... 13

Uninstalling ScanGear CS-U .................................................... 16

Uninstalling ScanGear CS-U using the CanoScan Setup Utility

CD-ROM ....................................................................... 16

Uninstalling ScanGear CS-U (Windows 98) ........................ 17

Chapter 3 Simple Mode and Advanced Mode . 19

What are the Simple Mode and Advanced Mode? ............... 20

Switching Between the Simple and Advanced Modes ........ 21

Simple Mode Main Window ................................................... 22

Advanced Mode Main Window.............................................. 23

Chapter 4 What is on the screen?..................... 25

Toolbar ..................................................................................... 27

Scanning Buttons..................................................................... 30

Simple Mode Main Window ................................................... 31

Advanced Mode Main Window.............................................. 37

The Main Sheet ................................................................. 37

The Tone Sheet .................................................................. 41

Contrast/Brightness Sheet ......................................... 44

Gamma Sheet ........................................................... 45

Histogram Sheet ....................................................... 47

Special Tone Curves Sheet ......................................... 49

Editing a Special Tone Curve Directly ......................... 50

The Halftone Sheet ............................................................ 52

The Scanner Sheet ............................................................. 53

Top Page Glossary

Contents Index

Chapter 5 Scanning an Original ........................ 56

Preparing for the Scanning Job .............................................. 57

Quick Start ............................................................................... 58

Previewing and Scanning an Original .................................... 60

Scanning in the Simple Mode ............................................ 60

Scanning in the Advanced Mode ....................................... 65

Scanning Film .................................................................... 69

Chapter 6

Opening Scanners and Cameras Properties ........................... 72

General Settings ...................................................................... 74

Events Settings......................................................................... 75

Preferences Settings ................................................................ 77

Color Management Settings ................................................... 79

Settings in the Windows Control Panel .........

Setting for Energy Saving................................................... 79

Chapter 7 Troubleshooting................................ 80

Pre-Scan Checklist .................................................................... 81

How to Avoid Problems .......................................................... 82

Troubleshooting Checklist ...................................................... 84

Glossary ........................................................... 89

Index ......................................................... 103

Customer Support Help Desk ........................... 108

chapter

Top Page Glossary

Contents Index

Before You Begin

Welcome to ScanGear CS-U

System Requirements

Getting Help in ScanGear CS-U

chapter 1

Before You Begin

Top Page Glossary

Contents Index

Welcome to ScanGear CS-U

Welcome to Canon ScanGear CS-U 5.8 software for Windows 98 and Windows 2000 Professional. ScanGear CS-U 5.8 (hereafter referred to as ScanGear CS-U) will provide flexible, efficient image enhancement tools for scanning with your CanoScan D660U Scanner by providing an interface with a variety of

TWAIN-compliant software applications. (TWAIN ☞p.101)

ScanGear CS-U has a number of powerful features that help you achieve peak performance with your scanner. Using ScanGear CS-U, you can preview and adjust an image before the image is scanned and acquired by the parent software application. Here is a quick summary of the important features of ScanGear CS-U:

• Two operation modes: Simple mode, which allows you to select all optimum settings with one selection, and Advanced mode, which allows you to create professional color and other enhancements for artistic effects.

• Flexible, fully automatic image acquisition, and pre-scan image manipulation prior to passing data to the image application

• TWAIN 1.6 compliant

• Text Enhanced mode for OCR applications

• Canon ColorGear (color matching software technology)

• Automatic preview or preview image cache

• ScanGear CS-U can run with or without its main window, depending on the acquiring application.

• 35 mm film can be scanned using the film adapter unit attached to the scanner.

chapter 1

Before You Begin

Top Page Glossary

Contents Index

Normally when you start a scanning job, you will see the ScanGear CS-U main window with its toolbar, Preview Area, and tabs. However, some software applications may not open the ScanGear CS-U main window. When this occurs you cannot use the settings described in this user’s guide because the host software application will provide the settings so you can change the image after it is acquired. When a software application uses ScanGear CS-U without opening the ScanGear CS-U main window, this is called the windowless mode.

chapter 1

Before You Begin

Top Page Glossary

Contents Index

System Requirements

The hardware and software listed below is required to use ScanGear CS-U.

Hardware

• You can use following scanner with ScanGear CS-U: CanoScan D660U.

• IBM PC or its compatible on which Windows 98 or Windows 2000 Professional can run

• Memory (RAM) required is determined by your system: Windows 98 32 MB (64 MB or more recommended) Windows 2000 Professional

32 MB (64 MB or more recommended)

• 10 MB of free disk space for ScanGear installation

• Free disk space, at least 50 MB. The amount of space required depends on the scanning area and the Color Mode or Resolution settings (color images scanned at higher resolution require more storage space).

Before you scan an image, check the file size in the status bar. You should have at least twice that amount

Note

• Minimum requirement for monitor: 800 x 600 resolution (minimum), High Color (16 bit) or greater.

of free space available on the hard disk.

chapter 1

Before You Begin

Top Page Glossary

Contents Index

Software

• Microsoft® Windows® 98 or Microsoft® Windows® 2000 Professional

• TWAIN-compliant parent software application

chapter 1

Before You Begin

Top Page Glossary

Contents Index

Getting Help in ScanGear CS-U

For information about using ScanGear CS-U, open the on-line Help by clicking the Help button on the toolbar or in the dialog boxes. Click the Contents or Index tab to see if the topic you are looking for is covered elsewhere in on-line Help.

chapter

Top Page Glossary

Contents Index

Installing ScanGear CS-U

Uninstalling ScanGear CS-U

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Installing ScanGear CS-U

Before you install ScanGear CS-U, make sure that you have accomplished the following tasks:

• Make sure that the computer is equipped with an enabled USB port. In My Computer - Control Panel - System icon, click the Device Manager tab and double-click “Universal serial bus controler”. If you can see the names of the Host Controller and USB Root Hub displayed, the computer is equipped with an enabled USB port. Some computers may require enabling the USB function with a BIOS setting. For details about enabling the USB port with the BIOS setting, see your computer manual.

• Make sure the scanner is connected to a computer.

• If a previous version of ScanGear CS is installed on your computer,

uninstall it before you install ScanGear CS-U 5.8.

Note

• With Windows 2000 Professional, ensure that you log on as an Administrator to install/uninstall the software.

• If ScanGear CS-U has already been installed according to the instructions in the Getting Started guide that came with the scanner, there is no need to perform the installation procedures described on the following pages.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Installing ScanGear CS-U

Follow this procedure to install ScanGear CS-U. To perform this procedure you need CanoScan Setup Utility CD-ROM.

Connect the scanner and computer with the USB cable. Then turn

on the computer.

A brief message will tell you that an unknown device has been detected, then the Add New Hardware Wizard dialog box opens.

Click the Next button.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Confirm that the first button is selected (Search for the best driver

for your device) and click the Next button.

Insert the CanoScan Setup Utility CD-ROM into the CD-ROM drive.

If you use the English version (uni-language) CanoScan Setup Utility

CD-ROM, select the “CD-ROM drive” then click the Next button. If you use the multi-language CanoScan Setup Utility CD-ROM, select the “Specify a location:” and click the Browse button. In the Browse for Folders dialog, navigate in the CD-ROM drive to find the Scangear folder and select the English folder then click the OK button. Finally click the Next button.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Confirm the name of the scanner is displayed, and click the Next

button to start copying the files.

When you are prompted to insert the Windows 98 CD-ROM, after

clicking the OK button, click the Browse button . Specify the CanoScan Setup Utility CD-ROM drive as the file source, then click the OK button.

Click the Finish button to complete the installation procedure.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Uninstalling ScanGear CS-U

Uninstalling ScanGear CS-U using the CanoScan Setup Utility CD-ROM

Always uninstall ScanGear CS-U with this procedure if you are using Windows 2000 Professional.

Note

Place the CanoScan Setup Utility CD-ROM in the drive.

Click the [Uninstall the Software] button in the CD-ROM’s menu

window.

3. Click the [Uninstall ScanGear CS-U] button in the Uninstall menu

window.

Follow the on-screen instructions to complete the procedure.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

Uninstalling ScanGear CS-U (Windows 98)

Follow the procedure below if you use Windows 98 and cannot uninstall ScanGear CS-U using the Uninstall menu of the CanoScan Setup Utility CD-ROM.

Click the Start button, point to Settings, and click Control Panel.

Double-click the Scanners and Cameras icon.

Click the name of the scanner to highlight it then click the Remove

button.

chapter 2

Installing ScanGear CS-U

Top Page Glossary

Contents Index

When the scanner is not connected to the computer, the name of the scanner will not be displayed so it cannot be uninstalled. Before you uninstall the scanner, make sure that it was connected to the computer when the system was started up.

Click the OK button to close the dialog box.

Double-click the “System” icon in the Control Panel, click the

“Device Manager” tab and search for the “Other Devices” category. If “CanoScan” appears, select it and click the “Remove” button. Click the “OK” button after “CanoScan” is removed.

Delete the Canon Inc.D066U.INF file from the following folder:

C:\Windows\Inf\Other

Delete the scanner folder:

C:\Windows\Twain_32\D66u

Note

To delete the files above from the Recycle Bin, right-click the scanner icon and select [Close] from the pop-up menu. The scanner icon will disappear. While this icon is being displayed, you cannot delete files from the Recycle Bin.

on the lower right corner of the screen

chapter

Top Page Glossary

Contents Index

Simple Mode and Advanced Mode

What are the Simple Mode and Advanced

Mode?

Simple Mode Main Window

Advanced Mode Main Window

chapter 3

Simple Mode and Advanced Mode

Top Page Glossary

Contents Index

What are the Simple Mode and Advanced Mode?

You can run ScanGear CS-U in either of two modes: the Simple Mode and Advanced Mode.

Simple Mode

The Simple Mode, as its name implies, is easy to use and fast. You can set up a scanning job quickly just by selecting from the name that best describes the job you want to execute: Color Photo, Color Photo Fine, B&W Photo, and so on. All you have to do is select one Image Type setting which sets up the scanning job for you automatically. You can accept the settings and start the scanning job, or you can make small adjustments to the settings before you begin. For routine scanning jobs you can create your own Image Types and save them under a name that will listed among the pre-defined selections.

Advanced Mode

The Advanced Mode presents more options which allow you to set up professional quality scanning jobs. You can use precise settings to select the scanning area in the Preview Area, adjust Color Mode and Resolution, and take advantage of the wide selection of Tone options (adjusting Contrast/Brightness, Gamma, Histogram, Special Tone Curve, and Threshold).

chapter 3

Simple Mode and Advanced Mode

Top Page Glossary

Contents Index

Switching Between the Simple and Advanced Modes

You can switch between the Simple and Advanced Modes simply by clicking a button.

• In the Simple Mode main window, click the Advanced Mode button to open the Advanced Mode main window.

• In the Advanced Mode main window, click the Simple Mode button to open the Simple Mode main window.

If you change the settings in either the Simple Mode or Advanced Mode, the changes will be reflected in the settings of the other mode.

Note

Advanced Mode

Simple Mode

chapter 3

Simple Mode and Advanced Mode

Top Page Glossary

Contents Index

Simple Mode Main Window

The ScanGear CS-U main window in the Simple Mode has only one sheet, named “Simple Mode” followed by the name of your scanner. Use the Simple Mode sheet settings to select the settings for a scanning job.

chapter 3

Simple Mode and Advanced Mode

Top Page Glossary

Contents Index

Advanced Mode Main Window

The ScanGear CS-U main window in the Advanced Mode has more sheets to perform the settings for scanning.

In the Advanced Mode click the Main tab , Tone tab (or Halftone tab), or the Scanner tab to open the Main sheet, Tone sheet (or Halftone sheet) or Scanner sheet. Use the settings on each sheet to perform important settings for scanning.

In the Advanced Mode, the name of your scanner (D660U) is displayed on the tab of the Scanner sheet.

Note

chapter 3

Simple Mode and Advanced Mode

Top Page Glossary

Contents Index

If you select Black and White or Text Enhanced(OCR) for the Color Mode on the Main sheet, the Tone tab is replaced with the Halftone tab.

Top Page Glossary

Contents Index

What is on the screen?

Main Window

Toolbar

Scanning Buttons

Simple Mode Main Window

Advanced Mode Main Window

chapter 4

What is on the Screen?

Top Page Glossary

Contents Index

Main Window

Tool Bar Title Bar

Preview Button Scan Button Clear Button

Setting Tab

Close Box

Preview Area

Status Area

Mode Switching Button

Window Resize Corner

chapter 4

What is on the Screen?

Top Page Glossary

Contents Index

Toolbar

Buttons on the toolbar help you to perform important tasks like, cropping images, moving images, zooming, and so on.

Crop Button

Click the Crop button and drag the pointer in any direction to draw a rectangle around the area you want to select for scanning. This reduces the time it takes to scan an image because you are pre-scanning or scanning only the necessary section of the image, not the whole area. To un-crop the image simply click outside the cropped area.

Move Image Button

Use the Move Image button to scroll the image up/down or left/right when the previewed image has been enlarged with the Zoom Tool button and is too large to be viewed all at once. Click the Move Image button and drag the image with the hand image pointer.

Note

The Move Image button is not available when the previewed image has not been enlarged and is displayed entirely in the Preview Area.

chapter 4

What is on the Screen?

Top Page Glossary

Contents Index

Zoom Tool Button

Click the Zoom Tool button and then click the left or right mouse button to change the size of the Preview image.

• To increase the magnification of the image, click the Zoom Tool button then click the left mouse button on the area of the previewed image to view. You can repeat this procedure to magnify the image up to 4 times its previewed size.

• To decrease the magnification of the image, click the Zoom Tool button then click the right mouse on the magnified image.

Auto Crop Button

After clicking the Crop button and drawing a rectangle around the part of the image that you want to scan, click the Auto Crop button to size the rectangle for the best fit around the object enclosed by the rectangle.

Negative/Positive Button

Click the Negative/Positive button to invert the colors and create a negative of the image.

Mirror Button

Click the Mirror button to flip the image horizontally like a mirror image.

Rotate Left Button

Click the Rotate Left button to rotate a scanned image left 90 degrees (counterclockwise). Click this button repeatedly to continue rotating the image left.

chapter 4

What is on the Screen?

Top Page Glossary

Contents Index

Rotate Right Button

Click the Rotate Right button to rotate a scanned image right 90 degrees (clockwise). Click this button repeatedly to continue rotating the image right.

Rulers Button

Click the Rulers button to display a ruler in the Preview Area to help with sizing and cropping the image. To select the gradations for rulers, click the down-arrow for Units on the Main sheet and then select the units of measure from the drop-down list.

Auto Tone Button

Click the Auto Tone button to have ScanGear CS-U automatically adjust the tone of a pre-scanned color image within the cropped area. The Auto Tone feature is on when the button on the toolbar is depressed. The Auto Tone button is available only when Color has been selected for Color Mode on the Main sheet and when ColorGear Color Matching is not selected for Color Adjustment in the Preferences settings. To reset to its default settings, click the All Reset button on the Tone sheet.

Help Button

Click the Help button to display the ScanGear CS-U on-line Help.

chapter 4

What is on the Screen?

Top Page Glossary

Contents Index

Scanning Buttons

Preview Button

Click the Preview button to pre-scan the image and display it in the Preview Area so you can decide whether the image needs any adjustments or if you want to apply any special effects.

After you click the Preview button, the Preview button becomes a Cancel button. Click this Cancel button to cancel

Note

Click the Scan button to scan the image on the scanner with any special effects or adjustments that have been applied and send the scanned image to the software application from which you launched the ScanGear CS-U.

the pre-scan operation.

Scan Button

After you click the Scan button, the Scanning dialog box is displayed. Click the Cancel button in this dialog box to

Note

Click the Clear button to clear the image in the Preview Area and cancel the setting you performed on for the preview image. If the preview image cache feature has been enabled on the Preferences sheet, clicking the Clear button also erases the image saved for the next time ScanGear CS-U is launched.

cancel the scan operation.

Clear Button

+ 78 hidden pages