Candy P 604/1 Instructions For The Installation And Use

1

93786156

GB INSTRUCTIONS FOR THE INSTALLATION

AND OPERATION OF THE ELECTRIC HOB

~~~

P 604/1

2

Unpacking the appliance .......................................................................3

Recommendations ................................................................................3

• INSTALLATION

Safety instructions.................................................................................4

Electrical connection......................................................................... 4/6

Fitting the hob......................................................................................7

• USING THE APPLIANCE

Hob features.........................................................................................8

Technical data ......................................................................................8

The hot plate........................................................................................9

Using the hot plate ............................................................................... 9

Cooking with the hot plate..................................................................10

General maintenance ..........................................................................11

CONTENTS

3

UNPACKING THE APPLIANCE

Inside the appliance you will find a plastic bag containing the fixing brackets required for
installing the hob in the worktop.

TO GET THE BEST FROM YOUR APPLIANCE, PLEASE READ THE FOLLOWING
CAREFULLY.
Please keep the operating and installation instructions in a safe place for future reference.
Before fixing the hob, note the serial number of the appliance just in case you should
require repairs from our after sales service organisation at some time in the future.

. Rating plate (located under the lower casing of the hob)

• All accessible parts of the hob will become hot while in operation. Always keep
children away from it.

• The hob should be given a quick clean after each use, to avoid the accumulation of
spillages and grease. If spillages are not removed, they will harden, and could cause the
production of smoke and unpleasant smells.

• When cooking with fats or oils, never leave hot plates unattented. Overheated fats or oils
can quickly catch fire.

RECOMMENDATIONS

4

INSTALLATION

Installing a domestic appliance can be a complicated operation which, if not
carried out correctly, can seriously affect consumer safety.

It is for this reason that the task should be undertaken by a professionally
qualified person who will carry it out in accordance with the technical regulations
in force.

In the event that this advice is ignored and the installation is carried out by an
unqualified person, CANDY declines all responsibility for any technical failure
of the product whether or not it results in damage to goods or injury to
individuals.

INSTALLATION: "ELECTRICAL CONNECTION"

The mains electricity supply connected to the appliance should comply with the norms in
force in the country of installation.
Candy declines all responsibility for any damage that may be caused by unsuitable or
unreasonable use.

Warning :

• Always check before any electrical operation, the supply voltage shown on the
electricity meter, the adjustment of the circuit-breaker, the continuity of the
connection to earth of the installation and that the fuse is suitable.

• The electrical connection to the installation should be made via a socket with a plug
with earth, or via an omnipole cut-out switch with an opening gap of at least 3 mm.

• The yellow/green wire of the power supply cable must be connected to the earth
of both power supply and appliance terminals.

• Candy cannot be held responsible for any accidents resulting from the use of an
appliance which is not connected to earth, or with a faulty earth connection continuity.

• Any queries regarding the power supply cord should be referred to After Sales
Service or a qualified technician.

The hob "P 604/1" is supplied with a terminal block which enables you to choose the
correct connection for the particular power supply.

The terminal block permits different connections :

• 220-240 V~

• 220-240 V2~

• 380-415 V2N~

• 220-240 V3~

• 380-415 V3N~