Candy FCS 201 N, FCS 201 X Instruction manual

USER INSTRUCTIONS

OVENS

EN

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

FR

MANUALE D’ISTRUZIONI

FORNO

IT

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

CANDY HOOVER GROUP S.R.L. • Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy

ES

02

12

23

33

Safety Indications

• WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.

•WARNING: the accessible parts can become hot when the grill is in
use. Children should be kept at a safe distance.

•WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.

•WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not
be powered by an external switching device, such as a timer, or be
connected to a circuit that is regularly switched on and off.

•WARNING: before initiating the automatic cleaning cycle:

- clean the oven door;

- remove large or coarse food residues from the inside of the oven using
a damp sponge. Do not use detergents;

- remove all accessories and the sliding rack kit (where present);

- do not place tea towels

• In ovens with meat probe it is necessary, before making the cleaning
cycle, close the hole with the nut provided. Always close the hole with
the nut when the meat probe is not used.

•Children under 8 should be kept at a safe distance from the appliance
if not continuously supervised.

•Children should not play with the appliance. The appliance can be
used by those aged 8 or over and by those with limited physical,
sensorial or mental capacities, without experience or knowledge of the
product, only if supervised or provided with instruction as to the
operation of the appliance, in a safe way with awareness of the possible
risks.

•Cleaning and maintenance should not be carried out by unsupervised
children.

•Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.

•The oven must be switched off before removing the removable parts
and, after cleaning, reassemble them according the instructions.

EN 02

•Only use the meat probe recommended for this oven.

•Do not use a steam cleaner.

•Put the plug into a socket equipped with a third contact which
corresponds to the earth and which must be connected and in
operation. For models without a plug, attach a standard plug to the
cable that is able to bear the load indicated on the tag. The earth
conductor is yellow-green in colour. This operation should be carried
out by a suitably qualified professional. In case of incompatibility
between the socket and the appliance plug, ask a qualified electrician to
substitute the socket with another suitable type. Connection to the
power source can also be made by placing an omnipolar breaker
between the appliance and the power source that can bear the
maximum connected load and that is in line with current legislation. The
yellow-green earth cable should not be interrupted by the breaker. The
socket or omnipolar breaker used for the connection should be easily
accessible when the appliance is installed.

•If the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.
If the cable is damaged, replace it promptly in accordance with the
following instructions:

- open the cover of the terminal block;

- remove the power cable and substitute it with a similar cable which is
compatible with the appliance (type H05VV-F, H05V2V2-F).

•This operation should be carried out by a suitably qualified
professional. The earth conductor (yellow-green) must be
approximately 10 mm longer than the other conductors. For any
repairs, refer only to the Customer Care Department and request the
use of original spare parts.

•Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.

•Any excess of spilled material should be removed before cleaning.

•During the pyrolytic cleaning process, surfaces can heat up more than
usual, children should therefore be kept at a safe distance.

EN 03

Summary

General Instructions

5

Product Description

7

Use of the Oven

8

Oven Cleaning and Maintenance

9

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

3.1 Display description

3.2 Cooking modes

4.1 General notes on cleaning

4.2 Maintenance

• Removal of the oven window

• Removal and cleaning of the glass
door

• Changing the bulb

Troubleshooting

11

5.1 F.A.Q.

EN 04