Air Line Accessories
Lever Safety Blowgun Kit MP5141
• Compact design to fit in confined spaces
• Hang-up hook for easy storage
• Includes: safety nozzle, extension nozzle,
rubber tip, inflation adapter, tapered
inflation nozzle, and
inflation needle
Pistol Grip Blowgun
• Trigger controls airflow to gun tip
Air Tool Accessories
• Narrow 3” extended nozzle easily fits
into confined spaces
• Comfortable, lightweight design
Ball Foot Chuck
• Thread size: 1/4” Female NPT
Air Line Inflator Gauge
• Dual foot air chuck for use in hard-to-reach areas
• 10-120 PSI gauge, calibrated in 2 PSI increments
• Built-in relief valve to reduce pressure in
over inflated tires and to zero gauge
• Includes 12” flexible hose
Tire Inflator with Gauge
• Inflation gun, chuck, and gauge are all combined
in one easy to use unit
• Clip on design enables hands-free chuck use
• Built-in relief valve for reducing pressure in overinflated tires
• Includes flexible hose for easier use
• 10-140 PSI gauge
MP5143
MP3233
MP5142
MP6000
Male Coupling
• Use to connect a variety of thread
sizes and shapes
• Thread size: 1/4” Male NPT
* More sizes available
34
MP2118
Visit us online: www.chpower.com
Air Line Accessories
Why Accessories?
Campbell Hausfeld offers a complete line of quality
accessories to properly install and maintain an air system.
In addition, many air tool acessories are offered to get the
most out of every tool. The following is a brief overview
of CH accessories. For a complete listing, please
visit www.chpower.com.
Compressor Shut-Off Kits PA1170
• Covered quarter-turn handle quickly turns air on or off
• Brass body with steel ball and Teflon® seals for long life
• High capacity airflow design reduces pressure drop to
tools for better performance
• Includes adapters to install on air compressors with
3/4” NPTF ports
• Reduces down to 3/8” NPTF
* More ball valves available
Air Tool Accessories
Adapter
• Use to adapt a variety of thread sizes and shapes
• Thread size: 1/4” Male NPTx 3/8” Male NPT
* More sizes available
Swivel Connector
• 360˚ swivel action reduces hose kinking
• 1/4” NPT(M) x 1/4” NPT(F)
Tee Fitting
• Supplies 2 air tools from 1 source
• Corrosion resistant brass construction
• 1/4” NPT (M) x two 1/4” NPT (F)
3-in-1 Air Manifold
• Supplies 3 air tools to 1 source
• Sturdy aluminum construction
• 3/8” NPT (M) x three 1/4” NPT (F)
Barbed and Swivel Hose Ends
• Threaded end connects to tools, fittings, couplers, or plugs
• Corrosion resistant brass construction
• Hose barb repairs or assembles damaged or bulk hose
• Secure fittings with properly crimped ferrules
or
hose clamps
• 1/4” x 1/4” Female
* More sizes available
PA1111
MP1038
PA1040
MP3230
MP3209
Or call CH Air Tools at : 1- 800-543- 6400
35
Air Line Accessories
Hose Repair Kits MP3314
• Repairs damaged air hose
• Includes: (1) hose splicer, (1) hose end, (3)
hose clamps for 3/8” hose
* Also available in 1/4” (MP3214)
PTFE Tape MP5136
• Use on all male threaded connections to prevent
air leaks
• Thicker and denser for better sealing and easier use
• 275” x 1/2”
Nylon Recoil Air Hose MP2874
• 50’ Hose easily expands to full length and
retracts for storage
• 35˚ to 250˚ F working temperature
• 200 PSI maximum working pressure
• 1 Year Limited Warranty
Air Tool Accessories
* Also available in 25’
Hose Reel PA1194
• Includes 50’ x 3/8” air hose
• Mounting plate attaches to any flat surface
• Beveled flanges makes it easier to wind hose
without kinking
PVC Air Hose PA1178
• Heavy-duty reinforcement
• 0˚ to 130˚ F working temperature
• 300 PSI maximum working pressure
• 1 Year Limited Warranty
* More sizes available
Standard Air Filters PA2121
• Removes unwanted dirt particles and condensed water
to extend tool life
• 5 micron element provides maximum filtration
• Metal bowl-guard protects against impacts
• Quick-release bowl and quarter turn drain for easier use
• 57 scfm flow capacity at 90 PSI
• 3/8” NPT(F) ports
36
Visit us online: www.chpower.com
Air Line Accessories
Mini Air Filters MP5138
• Removes unwanted dirt particles and condensed water
to extend tool life
• 5 micron element provides maximum filtration
• Screw-on bowl with manual drain
• 21 scfm flow capacity at 90 PSI
• 1/4” NPT(F) ports
Clean Air System PA2085
Dessicant Dryer
• Removes water vapor at the point of use
• Desiccant changes color when it needs to be changed
or recharged
• Outlet screen keeps desiccant particles out of tools
• Oil-removal filter removes 99.9% of all oil aerosols
• Clear bowl with metal guards for easy viewing fluid
level and impact protection
• Quick-release bowl, and quarter turn drain for
easy maintenance
Pressure Regulators PA2123
Standard Series
• Provides regulated output pressure of 0 to 150 PSI for
proper tool operation
• Self-relieving design vents downstream air flow for
easier adjustment
• Locking pressure knob prevents accidental
pressure changes
• Includes 0 to 160 PSI pressure gauge
• 120 scfm flow capacity @ 90 PSI
• 3/8” NPT(F) ports
Mini Series
• Provides regulated output pressure of 0 to 125 PSI
for proper tool operation
• Self-relieving design vents downstream air flow for
easier adjustment
• Locking pressure knob prevents accidental
pressure changes
• Includes 0 to 160 PSI pressure gauge
• 15 scfm flow capacity @ 90 PSI
• 1/4” NPT(F) ports
Air Tool Accessories
MP5148
Air Lubricators PA2081
Standard Series
• Provides automatic line lubrication to extend air tool life
• Oil-fog design allows bowl to be filled without
depressurizing system for easier convenience
• 3.5 oz. quick-release bowl and quarter turn drain
provide easier use
• 28 scfm flow capacity @ 90 PSI
• 3/8” NPT(F) ports
Pneumatic Tool Lubricant ST1270
• Oil can be used in both air tools and nailers
* Compressor oil also available
Or call CH Air Tools at : 1- 800-543- 6400
37
Air Line Accessories
Filter / Regulators PA2125
Standard Series
• Combines filter and regulator into one unit to save space
• Large capacity metal bowl for use with higher pressure
air compressors
• 52 scfm flow capacity @ 90 PSI
• 3/8” NPT(F) ports
• 250 PSI maximum inlet pressure
• Combines standard series filter (PA2121) and standard series
regulator (PA2123)
Filter / Regulators / Lubricators
Standard Series
• Combines standard series filter, regulator and lubricator
into one unit to save space
• Complete unit comes pre-assembled with modular mounting
bracket for extra convenience
• 3.5 oz. quick-release bowl and quarter turn drain allows
easy maintenance
• 28 SCFM flow capacity @ 90 PSI
• 3/8” NPT(F) ports
1/4” Series Industrial Style
Air Tool Accessories
Easy-Connect Coupler
• Easy-connect design - simply push plug
into coupler to connect
* More sizes available for couplers & plugs
1/4” Series Aro
Easy-Connect Coupler
• Easy-connect design - simply push
plug into coupler to connect
* More sizes available for couplers & plugs
1/4” Series Automotive
Easy-Connect Coupler
• Easy-connect design - simply push plug
into coupler to connect
PA2078
MP2883
MP5190
MP3236
* More sizes available for couplers & plugs
1/4” Series Lincoln
Easy-Connect Coupler
• Easy-connect design - simply push
plug into coupler to connect
* More sizes available for couplers & plugs
3/8” Series Automotive
• Easy-connect design - simply push
plug into coupler to connect
38
Visit us online: www.chpower.com
BC4084
PA1013
Air Line Accessories
Universal Design Couplers and Plugs:
•
Eliminate coupler confusion
• Fits most popular plug styles including automotive,
industrial and aro
• Easy-connect design
coupler to connect
• Includes accidental disconnect protection which also
protects the coupler sleeve.
- simply push plug into
1/4” Series Universal
• Accepts 1/4” industrial, automotive
and aro style plugs
• Tubular valve design provides higher
flow rates over conventional blade
style valves
• Heat treated locking balls provide
long life of wear parts
• Easy connect design - simply push plug into coupler to connect
• Brass construction resists corrosion and prevents sparks
* More coupler sizes available
Automotive Coupler and Plug Set
• Set Includes:
(1) Coupler 1/4” NPT(F), (2)
Plugs 1/4” NPT(M),
(1) Coupling 1/4” NPT(M),
(1) Coupling 1/4” NPT(F)
MP3335
PA1014
1/2” Series 2-in-1 Style BC4107
• Accepts 1/2” automotive plugs
produced by Campbell Hausfeld
and other manufacturers
Industrial Coupler and Plug Set MP2920
• Set Includes:
(1) Coupler 1/4” NPT(F), (4)
Plugs 1/4” NPT(M)
Air Tool Accessories
25 Piece Air Line Accessory Kit
• Set Includes:
• Blowgun
• Safety Nozzle
• (2)Tapered Inflation Nozzle
• (2) Inflation Needles
• PTFE Tape
• Rubber Blow Gun Tip
• Female Tire Chuck
• Dual Foot Air Chuck
• Tire Gauge
• Coupler
• (6) Male Plugs
• (2) Male Couplings
• (2) Female Couplings
• (2) Female Plugs
Or call CH Air Tools at : 1- 800-543- 6400
MP5200
39
Loading...