Caliber RMD602 User Manual

Thank you for purchasing the

RMD602

MP3/USB/SD/MMC Player,

with FM/MW Tuner

Operating Instructions

Safety Precautions

MUTE

OK

Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to operate
your model properly. After you have finished
reading the instructions, keep this manual in
a safe place for future reference.

Only connect the unit to a 12-volt power
supply with negative grounding.

Never install this unit where the operation &
condition for safety driving is restrained.

Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the
risk of traffic accident except using for rear
view video camera.

Never expose this unit, amplifier, and
speakers to moisture or water for preventing
electric sparks or fires.

Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit
or even cause fire.

Please power off this unit at once and send it
back to the after-sales service center or the
dealer/distributor you purchased from if one
of the following symptoms is found:

(a). No audio output;
(b). No image output;
(c). Water or other obstacle enters the unit;
(d). Smoking;
(e). Peculiar smell.

To ensure safe driving, please adjust the
volume to a safe & comfort level in case of
emergency situations.

To provide a clear demonstration and an
alternative for easy understanding of the
operation of this unit, graphic illustration
was used. However, this illustration is not
necessary printed as the actual image found
on the unit.

1

Contents

Safety Precautions .........................................1

Contents .........................................................2

Features .........................................................3

Panel Controls ................................................4

Remote Controls ............................................5

Basic Operations ............................................ 6

Rotary Knob Menu ......................................7-8

Radio Mode .................................................... 9

USB/SD/MMC/MP3 Playback .................10-14

Device Connections ................................15-17

Installation Guide.....................................17-19

Anti-Theft System .........................................19

Troubleshooting ............................................20

Specifications ...............................................21

2

Features

WMA and MP3 Compatibility

It is possible to playback WMA and MP3 files.

About WMA

The unit can playback WMA data.
Windows Media and the Windows logo are
trade marks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This unit may not operate correctly depending

on the application used to encode WMA files.

About MP3

Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e.revenue­generating) realtime broadcasting (terrestrial,
satellite, cable and/or any other media),
broad-casting/streaming via internet, intranets
and/or other networks or in other electronic
content distribution systems, such as pay­audio or audio-on-dem and applications.
An independent license for such use is
required. For details, please visit http://www.
mp3licensing.com.

Button Operation Explanations

Some frequent operations

1) Move cursor

Note:

In Setting mode, the VOL knob has the same
function as the / button to select setting
items.

2) Conrm

Press the button to open the
panel.

3

Panel Controls

Power on/off: Press to turn on/off the unit.

1. - Short press to select playing mode:

• Radio

• USB (when USB inserted)

• SD (when SD/MMC inserted)

• AV (front audio & video input. External

peripheral devices can be connected with
the unit.)

- Long press to ret

when in any mode, then use navigate
button to select the desired mode, and
press OK button to conrm.

2. Cancel source select menu and return to
previous menu

3. - Press to navigate up among option items

(in MP3/WMA mode)

- Play the previous preset radio station (in

Radio mode)

4. - Press to navigate down among option

items (in MP3/WMA mode)

- Play the next preset radio station (in

Radio mode)

5. - Power on/off (press and hold more than 2

seconds)

- Mute

6. 3 inch TFT display

7. SD card slot

8. USB port

9. - Rotate the knob to adjust volume level

- Press to select audio/video Setting, and

rotate the knob to adjust level.

- Press more than 2 seconds to Setting

menu.

10. Panel open

11. - Play/Pause (in MP3/WMA modes)

- Band switch: FM1-FM2-FM3-MW1-MW2

(in Radio mode)

urn to main source menu

12. - Preset scan (press briefly, in Radio mode)

- Auto preset (press more than 2 seconds,
in Radio mode)

- Stop (in MP3/WMA mode)

13. - Search the previous station manually,
and each press to seek step by step
(press briefly, in Radio mode).

- Search the previous station automatically
(press more than 2 seconds, in Radio
mode).

- Press to search the previous track or
chapter (in MP3/WMA mode).

- Fast backward by 2, 4, 8, 20 step (press
more than 2 seconds, in MP3/WMA mode).

- Press to navigate left among option items

14. - Search the next station manually, and
each press to seek step by step (press
briefly, in Radio mode).

- Search the next station automatically
(press more than 2 seconds, in Radio
mode).

- Search the next track or chapter (in MP3 /
WMA mode).

- Fast forward by 2, 4, 8, 20 step (press
more than 2 seconds,in MP3/WMA mode).

- Press to navigate right among option
items

15. - Confirm operation

- Stop auto seeking (in Radio mode).

16. Remote sensor

17. AV in

4

Remote Controls

Press to turn on/off the unit.

1. Power on/off

2. Setup

3. Menu cursor

4. Enter

5. Program

6. Digit area

7. Select Audio/Video Setting, then rotate the

knob to adjust level.

8. Volume

9. - Radio tune

- Track skip/seek

10. Source switch

11. Zoom

12. Repeat

13. Repeat A-B

14. Stop/Return

15. Play/Pause

16. Goto search

17. - OSD: On screen display

- AMS: Search and store stations

automatically

18. - DISP: Display time/clock (Video mode)

- ESC: Return to previous menu

19. - Video system PAL/NTSC/AUTO

- Radio band (in Radio mode)

20. Mute

Remote Control Operating Range

The remote control can operate within a
distance of 3~5m.

Replacing the lithium battery

When the range of operation of the card
remote control becomes short or no function,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.

1. Pull out the battery holder while pressing
the stopper.

2. Insert the button-type lithium battery with
the (+) mark facing upward. Insert the battery
holder into the remote control.

(CR2025)

1 2

Warning

• Store the battery where children cannot

reach. If a child accidentally swallows the
battery, consult a doctor immediately.

• Do not recharge, short, disassemble or heat

the battery or dispose it in a fire.

• Do not leave the battery with other metallic

materials. Otherwise, the battery may start
to give off heat, crack or catch fire.

• When throwing away or saving the battery,

wrap it in tape and insulate.

5

Basic Operations

Turn on/off the Power

1. Press to turn on the unit.
The unit goes back to the last status after

power on.

2. Press

Mute

Press the

• Doing the operation above again or

• Mute icon appears on the TFT during

Adjust the Volume

Rotate the knob on the panel or press VOL +/-

on the remote control to increase or decrease
the volume.
The adjustable range of volume is 0 to 39.

Playing Source Selection

Method 1

Short press the SRC button on the panel
or remote control to cycle through all the
available sources.

Method 2

In any mode, long press the SRC button on
the panel or remote control to enter main
source menu, then use navigate button to
select the desired mode, and press OK to
confirm.

more than two secnonds to power

off.

button

Note:

adjusting volume will release muting.

muting.

to cut the sound.

Note:

• When some devices are not ready, they

cannot be selected.

• You should stop switching when the playing

source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.

When Parking Brake Applied

1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.

2. When the car is moving ahead, if the
video file is played, the screen appears

“WARNING: Engage Parking Brake to View
Video”. The above warning screen will

prevent the driver watching images. The
passengers at the rear seats can watch
normally.

When Reverse Driving

If the rear view video camera is connected,

the unit automatically switches to CAMERA

source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.

6